Used Pegas Gonda 350X400 H-A-Cnc for sale (34,436)

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control Cslipewc Tdue E Umegt - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Cgjlip E Ujwcrrdemjt Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Celip Ejwcrnxe Umsgt Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm W-axis (tailstock end face): 165 - 585 mm Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Feed rates X-axis: 3,500 mm/min Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT - CNC control IBH - Loading device - Various accessories

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, 2 machines in a double package = 1 functional + 1 spare parts rack (identical) TECHNICAL DETAILS Control: GE FANUC 15T Tool positions: 12, all driven Spindle positioning: in 2.5-degree increments Chuck: 3-jaw hydraulic chuck Automatic tool measurement: available Chip conveyor: available Cooling system: available Cgslipowcz U Ij E Umet Maintenance: regular

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Cjlip Eswff R Sj Umjgt Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW Cjlip Eewffkxo Umjgt EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Csliewc Sicep E Umogt Lower turret turning diameter: 300 mm Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: H2X391V00906, Year of construction: 2019, operating hours: 8,340 h, load capacity: 2,000 kg, lifting height: 3,280 mm, free lift: 1,680 mm, load center: 500 mm, fuel type: gas, mast type: duplex, motor manufacturer: VW, LPG forklift in clean condition, ready for immediate use, and with a valid accident prevention certificate until April 2026. No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Drive type: LPG Load capacity: 2,000 kg Lift height: 3,280 mm Free lift: 1,680 mm Fork length: 1,200 mm Fork carriage width: 1,050 mm Load center: 500 mm Mast type: Duplex Engine and transmission Engine manufacturer: VW Fuel type: LPG engine Transmission: Hydrostatic Tires Tire condition: 100% new Front tire size: 200/50-10 Colewc St Ueip E Umegt Rear tire size: 18×7-8 Front tire type: SE-Natural (white, non-marking) Rear tire type: SE-Natural (white, non-marking) MACHINE DETAILS Total weight: 3,700 kg Overall length: 2,600 mm Overall height: 2,165 mm Height: 2,165 mm Hours: 8,340 h Color: Red UVV (accident prevention) inspection valid until: 04/2026 EQUIPMENT - Sideshift - 3rd and 4th valves - Pallet forks - Front work lights (2x ASW-LED) - Rear work lights (2x ASW) - Head protection - GRUL - New white tires (SE-natural) - Lighting - Emissions test - 1-pedal operation

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1996, operating hours: 8,046 h, load capacity: 6,000 kg, lifting height: 5,290 mm, load center: 600 mm, fuel type: diesel, mast type: standard, TECHNICAL DETAILS Engine: Deutz Diesel Load Capacity Load Capacity: 6,000 kg / LSP: 600 mm Load Capacity with Fork Positioner: 5,050 kg / LSP: 500 mm Equipment Cjlip Eswhkxge Umjgt Mast: Standard Sideshift: Available Fork Positioner: 500 / 1,700 mm Fork Carrier Width: 1,800 mm Fork Dimensions: 150 x 70 x 1,500 mm Tires Front: SE 355/65-15 Rear: SE 8.25-15 MACHINE DETAILS Operating Hours: 8,046 h Width: 1,870 mm Length: 3,500 mm Forklift Height: 2,740 mm Mast Height: 3,540 mm Lift height: 5,290 mm Weight: 10,300 kg EQUIPMENT - Cab with heating - Sideshift - Fork adjustment

Condition: used, machine/vehicle number: 007929, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Cgoljwgaz Ujip E Umet Total number of tool changer positions: 36

Condition: used, Year of construction: 2016, swing diameter 560 mm turning length 1.400 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° spindle head 6 DIN 55026/55021 ISO 702/1 bar capacity 65 mm spindle diameter in front bearing 110 mm turning speed range - spindle ~ 5.000 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C - Axis 0,001 ° Number of Turrets 3 turret (x-stations) 3 x 12 pos number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N number of toolpositions 12 pos. Celip Eewb Hx Ao Umjgt Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 9,4 kW Torque 19 Nm travel -x axis 140 mm travel -z axis 1.375 mm rapid traverse X-axis 22,5 m/min rapid traverse Z-axis 45 m/min feed power X/Z: 9.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N tool taper 30 x 55 mm DIN 69880 total power requirement 108 kVA weight of the machine ca. 14 t dimensions of the machine ca. 8,0 x 2,6 x 2,5 m CNC Turning- and Milling Center INDEX G 250 - INDEX WHD 200/14 Workpiece Handling System Chuck parts max. 200 mm in diameter Length up to approx. 200 mm Shaft parts max. 80 mm in diameter Length up to approx. 400 mm Workpiece weight max. 2x 10 kg Max. workpiece projection: 150 mm (at 10 kg) Two-jaw double gripper for blanks and finished parts Longitudinal gripper travel Z: max. 5,200 mm Gripping stroke Y: max. 300 mm Electric rotation axis 23 degrees Electric gripper rotation angle horizontal axis 4x 90 degrees Double gripper travel per gripper jaw 20 mm - Schnaithmann Pallet Handling System (Type BS) 20x workpiece carriers 240 x 200 mm

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h Cjliewc Shfjp E Umjgt EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals

Condition: used, machine/vehicle number: 007916, X axis working area: 6360 mm Cgelowfxkxoip E Umst Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007917, X axis working area: 5020 mm Cjlip Ejwfxkrs Umjgt Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 006095, X axis working area: 3130 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Cgslioiiq Tfop E Umet Total number of drilling spindles: 18 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 006067, X axis working area: 3050 mm Y axis working area: 850 mm Cgjlip Ejiiirlj Umot Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Cslipsn Rzcpe E Umogt

Condition: used, machine/vehicle number: 007836, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 31 Celov Ncnwsip E Umegt Total number of tool changer positions: 6

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Cgeleu H R Htoip E Umst Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 007851, X axis working area: 1200 mm Y axis working area: 2500 mm Colewayl Toip E Umogt Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 007699, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Cgslip E Ujvap Ekomot Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm No of Top Units: 2 Cgeleg E Th Soip E Umst Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 007300, X axis working area: 4200 mm Y axis working area: 1350 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Cjlipetvrfys E Umsgt Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Celipehwi U Te E Umjgt Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Cgolip Ejum H Eke Umet Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 13