Used Pegas Gonda 350X400 A-Cnc-Lr-F for sale (16,890)

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 x lashing eyes each 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour markings according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, Price: 500 ¤, , excavator trough, Price: 1,000 ¤ net, , , --  Misprints, errors and changes excepted, sample pictures --, More details at: !, More details: ! Coln Nu Rswgdaborerb

Condition: good (used), Year of construction: 2012, Ref. -No.: 10487 Manufacturer: SPINNER Type: H630 - A Creln Nuswf Ik Io Rrjb Year of construction: 2012 Type of control: CNC Control: Fanuc Storage location: Halberstadt Country of origin: Germany Machine-No.: HC 0XXXXX X-Travel: 1000 mm Y-Travel: 850 mm Z-Travel: 850 mm Table Height: 993 mm Distance Spindle /Table: 360 mm Table Dimensions (Lengthxwidth): 2 x 630 x 630 mm Table Load: 1000 kg Max. Workpiece Weight: 8 kg Max. Tool Length: 450 mm Max. Tool Diameter: 80 mm Tool Piece Magazine With: 60 Pcs./pcs. Turning Speeds: 10.000 RPM Max. Torque: 138 / 164 Nm Rapid Travel X/Y/Z: 32 mm / min Tool to tool: 5 sec Weight Of The Machine Ca.: 23 t Further information: Safety Integrated (Siemens) / Dual check safety (Fanuc) 3D-Simulation Real time simulation Multiple workpiece optimizing (same programs) Multiple workpiece optimizing (different programs) Cylinder interpolation 4th axis Mouldmaking-Package USB interface Rigid tapping Pocket cycle Drilling cycle Rotating of geometries Translating of geometries Mirroring of geometries Tool radius compensation Dwell time Spindle positioning stop Control options Programming by parameters Graphic simulation for test Graphical programming

Condition: new, Siemens 6SN1118-0DM31-0AA1 Control module version A, serial no. as per photo, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Creln Nu Rjudqx Ioreb

Condition: used, Year of construction: 2007, travel distance X-axis: 760 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, HAAS VF2SS year of production 2007 5 axes x 762 mm y 508 mm z 508 mm B axis +123°/-123° C axis 0-360° HAAS control max. speed 12,000 rpm spindle cone on BT 40 tool magazine 24 pcs. chip conveyor Colewhpdzsn Nu Rrorb technical documentation weight approx. 4300 kg

Condition: used, Year of construction: 1999, MORI SEIKI SL-200 SMC, 4- AXIS TURN MILL CENTRE MAKE MORI SEIKI, MADE IN JAPAN MODEL SL-200 SMC YEAR 1999 CONTROL FANUC MSD- 518 (18-T) MAX. TURNING DIA. 390.0 mm MAX. TURNING LENGT 507.0 mm SWING OVER BED 680.0 mm OVER CROSS SLIDE 510.0 mm BAR WORK CAPACITY 65.0mm MAX. SPINDLE SPEED 0-4000rpm TURRET 12 stations, ALL DRIVEN stations TAILSTOCK YES, SUB-SPINDLE SPINDLE BORE 73.0 mm POWER TOOL SPEED (C-AXIS) 67- 3000rpm SPINDLE NOSE A8 (TBC) RAPID TRAVERSE RATE X: 18,000mm/min & / Z: 24,000mm/min ELECTRICAL POWER SUPPLY 37.9kVA MACHINE FLOOR SPACE 2650.0 X 1900.0 mm MASS OF MACHINE 4500 KGS PLUS 4- AXIS MACHINE SUB SPINDLE MAGAZINE BARFEED RENISHAW TOOL SETTING PROBE Creln Nu Rewcx R Tjrob SWARF CONVEYOR GOOD RANGE OF TOOLING COMPLETE DUST EXCTRACTION SYSTEM MACHINE MANUALS SWARF BIN

Condition: good (used), Year of construction: 2012, Functionality: fully functional, Cutting area at 90 degrees: round 260 mm Cutting area at 90° flat (W x H) 320 x 260 mm Cutting area at 90 degrees: flat 260 x 260 mm Saw blade length 3,180 mm Feed rate 0 - 300 mm/min Material support height 950 mm Total power requirement 2.5 kW Machine weight approx. 1,360 kg Dimensions 2,200 x 1,350 x 1,770 mm Crjln Newgliqsu Rreb

Condition: excellent (used), Year of construction: 1990, Model: 40N Year: 1990 Control: Mazatrol T32-2 Swing over Bed: 540mm Cjlnswb Hc Ie Nu Rrsrb Distance Between Centres: 1500mm Spindle Speeds: 6 – 3000 RPM Spindle Bore: 81mm dia. Machine with: 15 station Indexing Turret Hydraulic SMW Steady 3 – jaw power chuck (15” dia.) Tool Pre Setter

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Cabin, extraction Donaldson Tirit DCE Crsln Newf Ikzeu Rrsb Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Heidenhain UM 112 inverter ID 325 001-01 SN 8377884 A, the item has been completely overhauled and has a 3-month warranty, professionally completely overhauled and tested, minor signs of wear, 100% functional, scope of delivery as per photos Croln Nsvmu Nhju Rrsb

Condition: ready for operation (used), throat depth: 400 mm, operating speed: 11 mm/s, table width: 120 mm, retraction speed: 113 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: Cadman-B + Touch, power: 12.5 kW (17.00 HP), net weight: 6,200 kg, opening height: 400 mm, passage width: 2,050 mm, 8 assen: Y1 / Y2 / X / X#39; / R / Z1 / Z2 / V Bovenste type LVD-gereedschap Lager type LVD hydraulisch Optioneel: Willa hydraulische adapter (modifix)trumpf Capacity: 80 ton x 2500 mm Csln Nsv Rwk Aou Rrjrb Backgauge: CNC Locking speed: 130 mm/sec

Condition: used, Year of construction: 2006, Working dimension X: 3.225 mm Working dimension Y: 1.550 mm Working dimension Z: 200 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 11 kW Coljwgl Imsn Nu Rrerb Rotation speed max: 18.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 17 Vertical drilling spindles: 23 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Groove saw: 90° turnable Edgebanding aggregate: Unit, changeable HOMAG Edgebanding aggregate EASYEDGE: Yes Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Safety device: Safety mat Enclosed drag chain: Yes Control: HOMAG POWER CONTROL PC 85 Software: HOMAG WOODWOP 5.0 Conformity marking: CE mark

Condition: new, Year of construction: 2025, LINEAR LATHE IULTIMATE 2S Additionally with swivel head on main and counter spindle Crolehxywcsn Nu Rrsb With 6 linear axes, including two Y-axes, two C-axes, 4 spindle axes and 48 tools (24 of which are driven), complex workpieces can be machined in a single pass. All linear axes are equipped with MITSUBISHI servo motors. These are directly coupled to the ball screw, and ensure high efficiency in power transmission with maximum accuracy. The C-axes and drive motors are also equipped with reliable MITSUBISHI servo technology. Two programs (workpiece front and back) can be machined independently on the main and counter spindles. Synchronous tapping under speed is also possible. In the iUltimate, 2 machines are integrated in one, so to speak. As iUltimate 2S, the machine is additionally equipped with a swivel head (B axis) on the main and counter spindle. For inclined machining, 24 driven tools (12x HS / 12x GS) are available. The B-axis makes it possible to use the driven tools flexibly on the face or matel surface (90° swiveling).

Condition: used, Year of construction: 2004, Suitable for cleaning coolant oil for grinding carbide. Accesories: 2 filter towers, automatic backwash. container content: 800 l Crelnsunwg Us Nu Rrsb flow capacity max: 80 - 100 l/min. Filter fineness:: greater than 0.003mm Connected load approx.: 4.0kW (400V/50Hz) Dimensions W x D x H: 1650 x 1000 x 2000 mm Weight approx.: 1000 kg colour: light grey

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Coln Nuewf Ikuo Rrerb Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: ready for operation (used), total height: 2,500 mm, total length: 4,400 mm, throat depth: 250 mm, operating speed: 10 mm/s, retraction speed: 100 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: 2D touch, power: 15 kW (20.39 HP), net weight: 10,000 kg, opening height: 400 mm, passage width: 3,150 mm, total depth: 1,700 mm, 7 assen: Y1 / Y2 / X / R / Z1 / Z2 / V Systeemtooling XRZ-versie met asymmetrische vingerbreedte Fiessler BendGuard Capacity: 135 ton x 4100 mm Celnev Rwlgo Nu Rrerb Backgauge: CNC Locking speed: 100 mm/sec

Condition: used, Year of construction: 2014, Suitable for cleaning cooling lubricant and oil-based grinding mist. Fan power: approx. 2400 m³ / h Suction power up to: 1200 m³ / h Noise level: 75 dB A Crsln Nsv Rbf Rou Rrsb Pressure difference: 840 Pa Connected load approx.: 3.4 A (400 V / 50 Hz) Dimensions L x W x H: 1130 x 625 x 610 mm Weight approx.: 130 kg colour: Gray

Condition: good (used), Year of construction: 2005, Ref. -No.: 10453 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2005 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder Crjlswf Iiwsn Nu Rreb - collet holder - collets Machines can be inspected under power by appointment.

Condition: used, Year of construction: 2003, Suitable for cleaning cooling oil for grinding hard metal. Accessories: 1 filter tower automatic backflushing Coln Nuovbz A Dj Rrjrb container content: 500 l flow capacity max: 50-60L/min. Flow rate max: 50-60 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 400 V / 50 Hz Dimensions W x D x H: 1950 x 1000 x 1370 mm Weight approx.: 400 kg colour: Purple

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Csln Newf Ihyju Rrjrb Machine can be inspected under power by appointment.

Condition: used, Year of construction: 2007, Suitable for cleaning cooling oil for grinding hard metal. Accessories: 1 filter tower automatic backflushing Crsljv Sapden Nu Rreb container content: 500 l flow capacity max: 50-60L/min. Flow rate max: 50-60 l/min. Filter fineness:: greater than 0.003 mm Connected load approx.: 400 V / 50 Hz Dimensions W x D x H: 1950 x 1000 x 1370 mm Weight approx.: 400 kg colour: Purple

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Croln Nuowf Ihgs Rrjb Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10436 Manufacturer: SCHERER FEINBAU Type: VDZ 120 rechts Year of construction: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840 Storage location: Halberstadt Country of origin: Germany Machine-No.: 660XX Crsln Newf Ig Aou Rrsb Turning Speeds: 5500 RPM Swing Diameter: 260 mm Rapid Travel Speed X-Axis: 60 m / min Rapid Travel Speed Z-Axis: 30 m / min Travel -X Axis: 626 mm Travel -Z Axis: 250 mm Spindle bearing diameter: 32 mm Rated speed: 1200 1 / min Turret places: 12 Pcs Machine length: 1685 mm Machine width: 2400 mm Machine Height: 2850 mm Weight Of The Machine Ca.: 8 t Further information: Spindle head with short taper DIN 55026: A6 Pallet conveyor WPS KNOLL system (2010) SAUTER turret (12 places) Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10435 Manufacturer: EMAG Type: VSC 400 Year of construction: 2012 Type of control: CNC Control: SIEMENS SINUMERIK 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 1038XX Turning Speeds: 4000 RPM Swing Diameter: 450 mm Rapid Travel Speed X-Axis: 45 m / min Creln Nu Rjwf Igijrsb Rapid Travel Speed Z-Axis: 45 m / min Travel -X Axis: 850 mm Travel -Y Axis: 315 mm Travel -Z Axis: 315 mm Lathe chuck diameter, max.: 445 mm Turret places: 12 Pcs Workpiece diameter: 320 mm Workpiece diameter: 270 mm Further information: EMAG disk turret, 12x VDI 50 for driven tools Documentation available Tools in the pictures are sold with the machine. Machine can be inspected and demonstrated under power.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10434 Manufacturer: OKUMA Type: LC 40 Year of construction: 2002 Type of control: CNC Control: FANUC 18-i TB Storage location: Halberstadt Country of origin: Germany Turning Speeds: 10 - 2.800 RPM Bar passage: 91 mm Chuck diameter: 450 mm Tailstock - diameter: 120 mm Turning Diameter: 550 mm Turning Length: 800 mm Swing Diameter: 800 mm Spindle passage: 90 mm Spindle nose: A2-8 Tailstock Quill Stroke: 150 mm Total Power Requirement: 44 kW Weight Of The Machine Ca.: 8 t Crjln Njwf Igcou Rrob Number of tool stations: 12 pc

Condition: good (used), Year of construction: 2004, Ref. -No.: 10387 Manufacturer: MATEC Type: 30 L / 6000 Year of construction: 2004 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 6000 mm Y-Travel: 800 mm Csln Nu Rowf Ifxorjrb Z-Travel: 600 mm Spindle Taper: SK 50 Table Load: 3000 kg Max. Workpiece Weight: 800 kg Spindle Speed: 20 - 9000 RPM Max. Torque: 165 Nm Main Drive: 60 kW Weight Of The Machine Ca.: 24 t