Used Pegas Gonda 240X280 A-Cnc-R-F for sale (19,766)

Condition: used, TECHNICAL DETAILS For CNC lathes with fixed or mobile headstock and for transfer machines. - bar diameter : round, 5 - 65 [mm] hexagonal, 5 - 56 [mm] - max bar length : 6 [m] - magazine capacity (with bundle) : 2500 [kg] - weight : 2700 [kg] EQUIPMENT - pushcart length : 1250 [mm] - pushcart axis height : 1100 [mm] Fpjbvmjuhbg Dek H Ujg - pushcart diameter : 63 [mm] - canal diameter : 70 [mm]

Condition: new, *Technical Specification: device type: 6/95 heating capacity: 6 kW cooling capacity: 45 kW Medium: water up to 95°C maximum external volume: 50 ltr at 95°C *Equipment hydraulic: - Cooling and filling controlled by solenoid valve - Automatic from cooling water or manual filling (at filling nozzle/option) - Level monitoring by magnet float-switch - Dirt trap in from process line of circulating system and cooling water inlet - Pump reversing for leak-stop operation - Manual mould draining via leak-stop operation and venting by tap at backside of unit - Filling time monitoring and aquatimer - Cool down mode (temperature adjustable) - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow metering *Equipment electrical: - Controller SBCmini, with relay for collective alarm 230V switchable, on the back of controller on terminal - Heating control by SSR - Control cabinet IP54 - Interface 20mA TTY; pinning Arburg - Cekon plug 16A *General equipment: - Corrosion resistant components (stainless stell, brass) - Heating rod made of Incoloy - Unit mounted on rolls, two pieces steerable with break - Additional temperature fuse for safe heating switch-off by contactor *Cooling: Power: 45 kW (stainless steel plate heat exchanger) Cooling water connection: Socket G3/8" IG (Performance data at 80°C flow and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of 3 bar) Fsbofnvvievmk H Uepg *Pump: Type: T401 Output rate (max): 40 ltr/min Pressure (max): 3,8 bar Motor capacity: 0,5 kW Construction: submersible pump / peripheral wheel *Dimensions/Weights/Colours Dimensions L/W/H: 514 mm x 238 mm x 493 mm (w/o conne.) Weight: approx. 30 kg Colour: Case: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulating medium int. thread G1/2" Cooling water int. thread G3/8" Filling (option) *This unit complies to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in offers or order confirmations.

Condition: used, Year of construction: 1979, pressure:63 t throat:315 mm stroke:200 mm power capacity:15 kW piston stroke:200 mm :450 mm Fpjbvscxxmksmk H Ujg table-size:710 X 630 mm dimension of ram:710 X 630 mm return capacity:1,3 t closing speed:210 mm/min return speed:210 mm/sec total height over floor:2500 mm length in width:1000 mm depth:1600 mm motor speeds::1500 u7MIN: voltage:380 V control voltage:220 V weight of the machine ca.:5 t

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, Year of construction: 2024, number of seats: 3, DEK:[9117737] PRICE OF THE FRAME STARTING FROM..... TO ADD EQUIPMENT, AS PER CUSTOMER REQUEST REGISTRATION AND ROAD ENTRY EXCLUDED Fpjbvmkevt Able H Ueg

Year of construction: 1998, Condition: excellent (used), I sell the top router for copy milling Sicar, year 1998. Milling head with motor tiltable + - 45° Spindle holder fi.10mm Electromotor: 1,9kW / 2800 rpm -> 18.000 rpm on spindle 1,5 KW / 1400 rpm -> 9.000 rpm on spindle Pneumatic control of the milling cycle, operated with pedal. Fpebvmkoh H S T Ie H Uog Made in Italy.

Condition: used, Baking oven with 2 floors, hood and stand R Fjbeur I Ttovmk H Uspg Dimensions: 92x110x215cm Electric power: 9.2kW

Condition: excellent (used), For sale: a package of power generators: -ALSTHOM UNELEC AT400MB30/R (emergency power generator) Fpebvmkovq Ighe H Ujg Power: 500 kVA; 400 kW -ERCOLE MARELLI 1312T Power: 270 kVA; 216 kW -VM V12130I Power: 250kVA; 200kW Option to purchase individual units. Tag: generator, power generator, electricity generator, portable generator, diesel generator, gas generator, backup power, emergency power, standby generator, inverter generator

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. Fsbvmjrzhfaok H Ujpg * Direction of rotation: from longitudinal to transservsal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 01.04.10, Kaj Olesen A/S pin bone remover Fobveulwhmjmk H Uopg Type: VBM.52, plastic belt, belt width: 280 mm, Total dimensions: 1000 mm x 500 mm x 1650 mm

Year of construction: 1988, Condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Fpsbslcbkgjvmk H Ujg Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Year 2012 All complete. Very good condition. Available immediately. Fpebvmkst Ndz Uo H Uog

Condition: new, Year of construction: 2025, center height: 315,425 mm, grinding wheel diameter: 750 mm, grinding diameter: 630,850 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, Main technical data : Swing diameter mm 630-850 Fpjbvmk Hopy A Iqo Usg Distance between centres mm 3000,4000,500 Standard wheel size (diameter x width x bore) mm750/570 x 100 x 305 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°)+10/- 30 Workhead swivel (°)90 Tabel swivel (°)+6/-4 Workhead spindle speed, infinitely variable RPM 8 – 156 Workhead sleeve taper bore Morse 6 Tailstock sleeve taper bore Morse 6 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 7,5 Wheelhead motor kW 22 Total power demand of machine kW 45 - between centres kg2 500 Weight of machine with standard accessories kg approx 17 500 Dimensions of machine approx. mm 12 000 x 2 980 x 2 200

Condition: excellent (used), The Treif Fox CE is a versatile portion cutter designed for precise slicing of various food products, including meat (with or without bones), poultry, fish, cheese, vegetables, and fruits. Its key features include: Cutting Capacity: The machine can achieve up to 180 cuts per minute, enhancing productivity in food processing operations. Adjustable Slice Thickness: It offers stepless adjustment of slice thickness ranging from 5 mm to 30 mm, allowing for flexibility in meeting different product specifications. Product Accommodation: The Fox CE can handle products with a maximum length of 660 mm, width of 160 mm, and height of 190 mm, accommodating a variety of product sizes. Fpsbvjvprx Ejmk H Usg Temperature Range: It is capable of slicing fresh, chilled, or slightly frozen products down to -4°C (24.8°F), providing versatility across different product states. Construction and Design: Constructed entirely from stainless steel, the machine ensures durability and meets high hygiene standards essential in food processing environments. Ease of Use: The Fox CE features a user-friendly design with simple operation, making it suitable for various sectors, including butcheries, supermarkets, and food processing plants. Power Specifications: The machine operates with a connected load of approximately 1,5 kW, ensuring efficient energy consumption during operation. These features make the Treif Fox CE a reliable and efficient solution for portioning a wide range of food products with precision and speed.

Year of construction: 2010, Condition: used, Panel return system for use with a single edgebander Fobvmorq Dmrek H Uepg The panel is transported towards the operator via a motorized belt and a roller\belt table. Moeller mini control Maximum panel dimensions 2500 x 1450 mm Maximum panel height 60 mm Working speed 8 - 25 m\min Working height from the ground 835 - 960 mm

Condition: used, Technical data: Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Revolutions: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Working table dimensions: 300x1100 mm Adjustable culagi arms Engine power: 5.5 kW Fobvmeh Dzxzsk H Uopg Power supply: 380 V Producer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Height: 1230 mm

Condition: excellent (used), Year of construction: 2015, saw blade diameter: 500 mm, 500 mm saw blade Fpobvmju A Ugcjk H Usg TWO MACHINES ON STOCK!

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft * Fpjbvmk Hjnn Rkws Ueg

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2011, operating hours: 7,800 h, machine/vehicle number: WLHZ1076TZK055270, TECHNICAL DETAILS Operating Hours Operating hours: approx. 7,800 h Chassis Dimensions Undercarriage transport width: approx. 3,000 mm Chassis centerline (Taurus): approx. 2,280 mm Chassis length: approx. 4,600 mm Boom and Stick Hydraulic boom: 3,600 mm Stick length: 3,050 mm EQUIPMENT - Without bucket and without SMP - 20% wear on the running boards - Defective discs - see photos - Full hydraulic hoses present - Taurus condition commensurate with age Further technical data according to the manufacturer - without guarantee Engine Power according to ISO 9249: 95 kW / 129 hp at 1,800 rpm Engine type: Liebherr D 934 S according to Stage IIIA / Tier 3 Fuel tank capacity: 290 l Automatic idle: sensor-controlled Hydraulic system Hydraulic pump: Liebherr variable-displacement swashplate pump Flow rate: max. 300 l/min Operating pressure: max. 350 bar Pump control and regulation: Liebherr Synchron Comfort System (LSC) with electronic maximum load control, pressure cut-off, minimum lift control, demand flow control, swing circuit priority and torque control Hydraulic tank capacity: 175 l Hydraulic system capacity: max. 290 l Control system Power distribution: via control spools with integrated safety valves, simultaneous and independent operation of the chassis, swing, and attachment Equipment and swing operation: with proportional joystick levers Travel operation: with proportional foot pedal for travel drive Additional functions: via switches or proportional foot pedals Swing Drive: Liebherr swashplate oil motor with integrated Brake valve and torque control Transmission: Liebherr compact planetary gearbox Slewing ring: Liebherr, internally toothed, sealed single-row ball bearing slewing ring Slewing speed: 0 – 9.0 rpm, continuously variable Slewing torque: 42 kNm Undercarriage Drive: One Liebherr swashplate oil motor on each side of the undercarriage with brake valves acting on both sides Transmission: Liebherr compact planetary gearbox Travel speed stage I: 2.4 km/h Travel speed stage II: 5.0 km/h Tensile force: max. 175 kN Undercarriage: B60L, maintenance-free Track rollers/support rollers per side: 8 / 2 Track shoes: 3-grouser Track tension: hydraulic Dimensions Height: 3.1 m Fpsbvmkjwgm Izj H Uog Length with folded boom: 8.7 m Undercarriage height: 1.1 m Digging depth: 6.4 m Reach at ground level: 9.7 m

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Fjbvewcrrdsmk H Uopg Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm W-axis (tailstock end face): 165 - 585 mm Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Feed rates X-axis: 3,500 mm/min Fpobvmkswcrnxo H Ujg Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t EQUIPMENT - CNC control IBH - Loading device - Various accessories

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, 2 machines in a double package = 1 functional + 1 spare parts rack (identical) Fsbewcz U Ijvmk H Ujpg TECHNICAL DETAILS Control: GE FANUC 15T Tool positions: 12, all driven Spindle positioning: in 2.5-degree increments Chuck: 3-jaw hydraulic chuck Automatic tool measurement: available Chip conveyor: available Cooling system: available Maintenance: regular

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Fpjbvmk Hswff R Sj Usg Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Fobvmjwffkxsk H Ujpg Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid - Safety light curtain - Sheet thickness measurement

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Fpebvmk Howc Sics Usg Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Fpsbvmkjwc Shfs H Ujg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals