Used Ajce Ab-810M for sale (87,386)

Condition: new, Year of construction: 2025, Are you looking for a machine for sheet metal processing? Do you expect quality and reliability? Professional advice as well as accurate and punctual deliveries will be provided by Prod-Masz. ZGR-2140/1.5mm (2mm Alu) the maximum working length 2140 mm the thickness of the steel sheet up to 1.5 mm non-ferrous metals 30% higher bending performance bending angle: 145 degrees (on request up to 165 degrees) Duslnec Ikrqe T A Ufet cut throughout the working length a table for supporting the rear plate gas springs beam curving 20 mm weight approx 350 kg hand-held machine raising the upper beam into three positions maximum ground clearance of 100 mm between the beams

Condition: good (used), working width: 22,650 mm, Used ABUS overhead crane 17.5 ton span 22650MM Deln Tjtk N Etj A Ufjut Used traverse crane ABUS 17,5 ton

Condition: new, Year of construction: 2025, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm Djln Tev A Sn Tj A Ufeut • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: new, NEW AXIAL FANS Djln T A Uouni Ahefout EBM-PAPST : - A6D800-AD01-01 : 400 €/piece (4 available). - A6D630-AN01-01 : 220 €. ZIEHL ABEGG : - FE050-VDA-4I.2 : 300 €/piece (2 available). - FC056-4DA.4I.2 : 950 /piece (2 available). - FC056-4DK.4I.V7 : 950 €. - FC080-VDQ.7Q.V4 : 1,100 €. GÜNTNER VT03106 - S6D800-CD01-07 : 1.250 €. Excl. transport

Year of construction: 2008, Condition: used, ABL washer for floating product. Dusln T Aju Rq Acs Ufot

Condition: ready for operation (used), Year of construction: 1992, Abene VHF 3 milling machine Abene VHF-3 Table size 1200×320 Longitudinal displacement 715 mm Dueln T A Uot E Dikofet Transverse displacement 275 mm Vertical displacement 500 mm Speed 44-2000 rpm Automatic feed X Y Z Idle speed X Y Z Automatic feeding is infinitely adjustable in the X Y Z 3 Axis digital readout from Heidenhain.

Condition: new, Year of construction: 2025, ZGR-3640/0.8 Warrenty: 12 months Certificate CE Eccentric pressure that is transferred to both sides of the machine Working length: 3640mm to the plate thickness of 0,8 mm STEEL SHEET 0,8 mm TITAN-ZINC-PLATE 0,8 mm, ALUMINIUM SHEET 1,2 mm , COPPER PLATE 0.8 mm, NIRO-SHEET 0,5 mm , Bending beam: 24 mm Bending angle: 145 degrees Cutting in the whole working length, Lift the upper beam in three layers, maximum width between the beams 80 mm rear frame for holding sheet, weight: 650 Kg Shears - with regulation of scissors guide and the rolls, which are made of high-alloy steel of very high resistance to wear. This allows cutting of sheet metal over a very long period without sharping the rotary shear. The performance of the rotary shear is about 40km sheet with a thickness of 0.5 mm - up to the first sharpening. The shears can be sharpened on average 35 times. The rotary shear weighs about 6.5 Kg. The price of this item does not include VAT. For invoice, we need the active VAT No. We provide VAT invoices from the tax rate of 0%. If you wish to order private, you should contact us. Dslocka N Usn T A Ufsut

Condition: new, ABB GENERATOR 2GAA162420-ADKAZ01 Djln T A Uouadk Asfout LARGE STOCK AVAILABLE

Condition: new, Year of construction: 2021, machine/vehicle number: MR004301, Pneumatic locking bench with a maximum height of 1800 mm. Price is ready to use, ex Staphorst. Delivery on site at extra cost hine is equipped with the following options: - Manual pressure unit at the front Technical specifications: - Stroke of clamping cylinders : 60 mm - Wheel set : Yes - Maximum length : 2500 mm - Maximum height : 1800 mm Duoln Tevcy Emj A Ufjt - Number of vertical pressure bars : 4 - Maximum pressure weight cylinders : 450 kg - Serial number : 8877

Condition: used, Year of construction: 2010, Loading crane HIAB 211 EP-4 Djln T A Usuxx Sbofjut Year of construction 2010 4x hydraulically extendable 5th and 6th function Remote control Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Please contact Bart Hoogakker for more information Djln T A Ueviprpofeut

Condition: new, core diameter: 400 mm, 2 rolls of cable 400mm2 Dueleut Tkyen T A Ufst Sold as a whole (+/-213m) Reel 1: 165m Roll 2: 48m Available directly from stock. 400mm² single XXII Helix cable N2XH-0 1x400RM 0.6/1kV VDE 0276 CE Production year 2020 & 2023

Condition: new, Year of construction: 2025, ZGR-3140/1,0 Our products are best quality and have certificate CE. Plate Bending Machine ZGR-3140\1,0 + additional equipment Technical data: Duelnecntnkj T A Ufot - Maximum working width: 3140 mm - Sheet gauge up to: 1,0 mm (Steel) - Titan-Zinc-Plate 1,0 mm, Aluminium Plate 1,8 mm Cooper plate 1,5 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 600 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty.

Condition: new, ABB DC Drives DCT880-W03-01 LARGE STOCK AVAILABLE Dusln T A Usuadi Ssfjt

Condition: new, Year of construction: 2023, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Deln Tovrtllj A Ufeut Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed.

Condition: like new (used), Year of construction: 2019, operating hours: 148 h, lifting height: 3,250 mm, fuel type: electric, mast type: duplex, construction height: 2,190 mm, lifting capacity: 1,000 kg, Manufacturer + model:ACTIL N 10 S - TFY Dujln T A Uou Eddpofot Mast:2F3250 ID:23093.0147 Cat.:Demo Mast:2F3250 Lowered height:2019 mm Lifting height:3250 mm Capacity:1000 kg Year:2019 Hours:148 hours Capacity:24 v / 775 ah Options:DEMO !!! Counterbalance stacker  MINI forklift - Dual steering - Duplex FFL mast - With FLEXIBLE adjustable forklift handles - SUITABLE for all types of pallets POWERSTEERING complete LIKE NEW !!!

Condition: used, Please contact Bart Hoogakker for more information Duoln T A Uotuiq Ssfot

Year of construction: 2019, Condition: good (used), Functionality: fully functional, The Labu Three-Vessel-Brewhouse is entirely made of stainless steel and consists of: Cooker, Lauter tun, Whirlpool and Electronic controls. Djln Toup Ez Aj A Ufsut The design of the Labu Three-Vessel-Brewhouse facilitates the parallel and nearly simultaneous production of two brews. Because of this double-batch principle, the space requirements, connected wattage and the acquisition costs are lower than those of conventional systems. A double-batch can even consist of different beer types, because the two brews are processed independently. For more information and a detailed description of the double-batch brewing process, please refer to the site of labu.

Condition: new, Year of construction: 2025, Delivery every week - RELIABLE! Are you looking for a folding machine? You expect quality, reliability. You can rely on competent advice and accurate, punctual delivery by the well-established Prod-Masz team. Direct from the manufacturer! Folding machine 2140T/0.8 incl. transport wheels Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - degree scale - Weight: about 150 kg - The rotary shears (max. cutting capacity 0.8 mm / steel) + 350 euros Dslnob Hd Dlo T A Ufeut - The machine complies with CE guidelines and has a 12-month guarantee. - transport wheels incl. Price: €1,350.00 Short delivery times! Ordered today - delivered next week! We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Functionality: fully functional, ABB SE JKG256 3AUA0000185452 Dusln T Aouadf Ho Ufet Single drive LARGE STOCK AVAILABLE

Year of construction: 2016, Condition: used, Various aluminium sawing machines in stock Dslnef Rihvo T A Ufout

Condition: good (used), Year of construction: 1997, machine/vehicle number: 11747, table length: 500 mm, table width: 400 mm, overall weight: 3,600 kg, punching force: 50 t, Automatic punching machine, can run up to 400 rpm. Can be seen & tested live and in action on request. Dujljvc Hf Hon T A Ufjt

Year of construction: 1997, Condition: used, machine/vehicle number: 14/763870, For sale Used Abus single girder overhead crane 16,820mm x 2x 2,000 kg. Deln T A Ueuv D Rdjfsut We can possibly supply the cranes including: * Assembly and inspection * power rails * radio control * master controls Jan Reiling B.V. also supplies new cranes completely customized at very competitive prices. * overhead cranes * suspension cranes * Slewing cranes * KBK rails cranes * boat elevators All our new and used cranes which we deliver assembled are delivered including warranty! In addition, we have our own stock of about 15,000 Demag parts. For more information see the website of Jan Reiling B.V. Cranes, crane, rolburg, workshop crane, warehouse crane, hoist, krane, hallenkrane, brückenkrane, bruckenkrane, werkstattkrane, lagerkrane, hebezeuge, cranes, universel crane, hoist. Overhead crane, laufkrane, overhead crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Condition: new, Year of construction: 2025, Sheet metal machines type RED are the trademark of the Prod Masz company. Each RED press brake has a narrow folding beam, regardless of its length, can be bent on 3 sides thanks to side cut-outs, 2 handles on both sides. An additional advantage is more space inside for a fold. Professional folding bench RED PLUS with foot pedal Technical specifications: the maximum working length: 3200 mm Bending capacity: 0.8 mm (steel) 1.2 mm (aluminium, copper, zinc) Bending beam thickness: 15 mm Bending angle: max 160 degrees Upper beam opening: 80 mm Weight: about 700 kg Roller scissors plus 350 euros The front depth stops and rear frame are also included in the price. Bending from 3 sides -> cutouts on the side Recess 60mm/45° Marking template FREE :) Price: EUR 6,600.00 Delivery costs: PLEASE ASK Delivery date: every week We are looking forward to your contact! Dolnecrcgqj T A Ufout Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: new, Year of construction: 2025, This model SGR-1400 is characterized by the removed upper and lower segments and also the bending beam is divided into segments. In addition, treadle is mounted to the opening of the upper bending beam. - Segments of an upper and lower clamping arm extends the application range, - Blockade by means of a pedal, the hands are free and you can freely position a sheet, - Folding machine for universal use in repair, - and body shops, - Compact design, modern shaped, - Manual folding machine for standard tasks, - Segments of an upper clamp enhance the bending ability segmentback width 30,40,50,60,70 and 100 mm - three cheeks are equipped with segment jaws (full segmentation) -application for preset bending angles Technical specifications: - Max. Working width; 1400 mm - Bending angle max. 160 degrees - Max. Sheet thickness (steel) 1.5mm Deln T Aoc I T Txs Ufjut - Weight 285 kg Price: 5.700 Euro