Used Ajce Ab-450M for sale (87,739)

Year of construction: 2000, Condition: used, Technical details: pass through height: 730 mm width: 750 mm Crjbu Uevrzwiekawob depth: 875 mm degree: max. 450 °C voltage: 400 V work height max.: ca. 850 mm total power requirement: 18 kW Total weight, approx.: 436 kg dimension machine xH: 1,55 x 1,2 x 1,8 mm 4 shelves with supports can be placed in the heating chamber. This electric stove currently has 1x shelf in the interior. The door (size 930 x 880 x 60 mm) is lined with fireclay. Operation from the side via electronic control panel. A motor-driven fan is installed at the rear for cooling. The stove stands on a welded base frame made of sectional steel. *

Year of construction: 1960, Condition: used, Surface grinder with magnet 250 x 135 400 Volt power 1,8 kw Crebjiuz Tgsu Ukaweb

Condition: good (used), The scope of delivery includes: 1x pallet transfer station, used Material color: RAL 5010 Gentian Blue Total height: approx. 2,200 mm Total width: approx. 1,500 mm Crobu Ukaswaiatewob Currently in stock: 1 unit Your contact person: Mr. Joachim Pollmann Mr. Thomas Barth General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2019, Used Linear Labeler PackLab Used Linear Labeler, built in 2019. Very little used therefore kept in excellent condition. Non-stop function with two groups of wrapping labels. Flexible self-adhesive linear labeler for wrapping label application, front and back. Suitable for applying partial or wrap-around body labels on cylindrical containers and partial front and back labels on shaped containers Speed of production: Crobu Ukaovgutgewob Achieves a production of 220 jars per minute, therefore 13200 jars per hour. Labeler Non-Stop PackLab 2019 base with external labeling stations to give the operator more accessibility both during the work phases and during the format change. N. 2 labeling stations for each label to be applied with automatic interchange in the presence of an end of the reel, breaking of backing paper, and lack of a label on the reel. PLC and other: PLC type is Schneider with a 5-inch touch screen. The wrapping belts of the Used Linear Labeler are motorized with speed regulation and with an encoder connected to the machine’s speed. While the upper ribbons are motorized and with stabilizers to keep the container straight. There are inlet and outlet overflow sensors for flow regulation. Adhesive group of the Used Linear Labeler recipe adjustment keyboards with storage of up to 500 formats. This machine is complete with all safety protections according to CE regulations. All the machine user manuals are also available. The original copy of the use and maintenance of the machine is also released.

Condition: used, power: 90 kW (122.37 HP), rotational speed (min.): 2,975 rpm, 1 x three-phase motor Item No.: Mot 06 Condition: smoked, tested, and with functional guarantee Manufacturer: ABB Type: M2BA280SMB2B3 Design: B3 Frequency: 50 Hz Power: 90 kW Voltage: 400 V Speed: 2975 rpm Cjbu Ukowffn Dsawjrb Shaft ø: Weight: 630 kg

Condition: good (used), Deburring machine, hole deburrer, bore deburrer, deburring device, pipe deburring machine -Manufacturer: Häberle, two-spindle pipe deburring machine type HR 302 -Drive: 0.55/0.75 kW -Spindle speed: two-stage -Recording: MK3 -Deburring tool:: Ø 45/42 mm see photos Crobu Ukot N Acwjawjb -Number: 1x deburring machine available -Price per piece -Dimensions: 580/500/H295 mm -Total weight: 65 kg/piece

Condition: excellent (used), Year of construction: 2010, load capacity: 45 kg, We at Binici MB GmbH also have other industrial robots in-house. Crebu Ukev Diwheawjb All our robots are fully functional (with complete accessories). We are at your disposal for good advice

Condition: good (used), Year of construction: 1960, Aba surface grinder no. 3261 15000kg power 2,55 kw size FF625 condition very good Cobu Uot T Ri Tskawjrb

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- Csbjwf Dwwsu Ukawsrb The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: excellent (used), Comes from Recipharm UK, ready to be used. Cjbu Ukewdgrheawerb

Condition: used, Year of construction: 2003, installation height: 555 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 315 t, ram stroke: 160 mm, overall weight: 45,000 kg, material thickness: 5 mm, sheet thickness steel (max.): 5 mm, controller manufacturer: SIEMENS, controller model: S7, lifting height: 160 mm, load capacity: 4,000 kg, worktable length: 2,000 mm, coil outer diameter: 1,500 mm, coil weight: 4,000 kg, coil width: 400 mm, material width: 400 mm, number of straightening rollers: 9, sheet thickness (max.): 5 mm, tool height: 555 mm, CONTROLS .. PLC SIEMENS S7 PRESS DESIGN .. drive system: knuckle-joint .. frame design: H-frame, monoblock .. openings in uprights: yes .. number of suspensions: 2 .. feedstock transport direction: left to right PRESS FORCES .. total force (nominal): 315 to .. nominal work capacity: 38 kNm PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1200 mm .. thickness of bolster plate: 200 mm SLIDE .. slide force: 315 to .. table surface (left-right): 1995 mm .. table surface (front-back): 1100 mm .. stroke: 160 mm .. stroke rate (max.): 80 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 140 mm .. stroke rate (min.): 20 /min .. stroke rate (max.): 80 /min .. main drive power: 90 kW TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 555 mm .. distance between columns (H-frame): 2060 mm .. passline opening (free passage in side columns): 1060 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm COIL CHAIR Cebu Ukewbn Dasawjrb .. coil weight max.: 4 to DECOILER .. design: single reel, traversable .. sheet width max.: 400 mm .. sheet width (min): 30 mm .. coil weight max.: 4 to .. max. diameter of coil: 1500 mm .. mandrel expansion range from: 460 mm .. mandrel expansion range up to: 530 mm .. movement: 1500 mm LEVELLER UNIT .. sheet width max.: 400 mm .. sheet width (min): 50 mm .. material cross section max. (450 N/mm2): 1000 mm² .. number of leveller rolls: 9 .. diameter of leveller rolls: 50 mm .. number of infeed-/outfeed rolls: 150 .. feed velocity min.: 5 m/min .. feed velocity max.: 50 m/min STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 400 mm .. sheet thickness max.: 5 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 45000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. strip feeder: yes Coil Reel KOHLER 4000.1 Straightener KOHLER KRM 50.400/9 KOHLER Loop control BÜ5 Roll feed KOHLER WVE 120/400 HIESSL belt lubrication (wide spray) UNIDOR control system Tool loading consoles

Condition: good (used), Code: 0092 Brand: STROMAB Model: PS 45/F - CE Standard Pendulum saw for cutting wooden boards, packaging, sawmills, joinery, wood window frames and various - CE Standard Technical data: Manual feed Blade diameter mm 450 F30 - Speed 2800 rpm Motor Hp 5,5 Cobu Ukaewb Hrpswjrb Cutting capacity mm 510 Cutting height mm 130 Infeed and outfeed roller table mm 3000 Suction port diameter mm 150 Wheels on the base Overall dimensions mm 3700 x 1500 x 1750 h Weight kg 380

Year of construction: 2007, Condition: good (used), LABOTEK DDM4-120 Dry Air Dryer Stock No.: 503563 Machine Type/ Equipment Type: Dry Air Dryer Crjbuswakwgo Ukawob Manufacturer: LABOTEC Type: DDM4-120 Year of Manufacture: 2007 The DDM is a mobile dry air dryer designed for the continuous drying of free-flowing plastic materials in granular form. The DDM is supplied as a standard mobile unit and can be installed alongside the processing machine(s) that will be supplied with dried raw material. The DDM is supplied as a standard unit with automatic dry air material transport to one processing machine and can also be supplied with a transport system for two processing machines. The DDM is designed for the drying of hygroscopic and non-hygroscopic raw materials, including reclaimed material, in the temperature range between 60 and 140°C with a maximum deviation of +2/-2°C. DDM is also available in a HT/LT (high/low temperature) version, which dries in the temperature range of 50-180°C. Due to the highly precise temperature control and a dew point temperature of -30°C, a residual moisture content of less than 0.02% can be achieved. (HT/LT 0.002%) - Connected load: 9 kW - Tank volume: 120 liters - Heating capacity: 8 kW

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00343, arm reach: 2,750 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, payload: 205 kg, Refurbished ABB IRB 6640-205/2.75 manufactured in 2015.12. The robot comes with an IRC5 controller including Flexpendant DSQC679. Cobu Usv U Uquskawerb   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6640-205/2.75 Model Number: IRB-6640 Year of Manufacture Robot: 2015.12 Warranty term (months): 12   Payload (kg): 205 Reach (mm): 2750 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1320   Controller: IRC5 Year of Manufacture Cabinet: 2015.12 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Condition: new, Year of construction: 2025, Mobile Paint Container Take your painting process to the next level with mobile convenience. Crjbewf Dmxeu Ukaweb Mobile paint booths in a container design for painting and coating various objects. They are specifically designed for mobility, making them easy to transport and set up on different construction sites. The booth is typically equipped with a ventilation system to ensure air quality, lighting, and a filtration system to prevent paint overspray. The ventilation system ensures that fumes and particles released during painting are contained within the booth, preventing any danger to the surrounding area. Mobile paint booths are a practical and flexible solution for companies that need a portable and effective painting system that can be transported from one construction site to another. Design and Features Overview Our mobile 20-foot Sapi paint containers consist of a robust steel frame with welded wall and ceiling panels. We can add special equipment such as cranes or lifting devices inside. The floor is made of teardrop plate. Both door panels contain ventilation grilles fitted with fine-pored filter mats. One panel is designed as an emergency exit for safety reasons and features a viewing window. It's also worth mentioning that these aren't simply converted shipping containers! We manufacture all of our containers from scratch. We use only the most robust materials that meet our requirements and have also been safety-tested and proven. Conventional shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction panel for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction panel consists of a galvanized housing, folded with guide plates, including various suspension and fastening elements for the filter assembly. The powerful, explosion-proof extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Next-generation mobile paint booths: Meeting EU requirements and advancing coating solutions The new generation of mobile paint booths must meet the highest EU requirements. The inclusion of new coating systems such as hydro-based paints, polyurethane resins, epoxy zinc dust, or epoxy iron mica paints places high demands on existing paint booths. Therefore, we have developed a new and unique mobile paint booth for the next generation of coating solutions. A key criterion is the transport of workpieces for painting and further processing steps. Whether it is dry paint mist separation or wet washing, air humidification or air drying, condensation drying using low-temperature processes or warm air drying, or whether workpiece pretreatment is carried out using high-pressure washing with water in a recirculating system, compressed air blasting, or wheel blasting technology.

Condition: used, Max. load capacity: 6300 kg, span: approx. 20,000 mm, with electric trolley, bottle hook and floor control Csbuowact Te Ukaworb

Condition: good (used), Year of construction: 2009, Functionality: fully functional, DGUV certified until: 03/2026, Bread slicer Cobu Uevkn Hzekawsrb Wabäma model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Mobile machine cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine + spare part service Option: Maintenance contract Spare blade Service package Many bread slicers in stock!

Condition: used, Year of construction: 1980, Technical details: grinding length: 600 mm grinding width: 300 mm total power requirement: 7,5 kW number of spindle speeds: 0-3000 grinding wheel motor: 7,5 kW grinding wheel diameter: 300 mm dimensions of grinding wheel: 76 x 20 mm ABA magnetic table flat grinding machine Crsbu Uswg H Hqekawob *

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Crsbu Ukotddw Ajawsb Hydraulic lift, lifting capacity around 1 ton.

Year of construction: 1990, Condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm -Weight approx. 300 kg Crebu Uedd Ilxskaweb

Condition: used, Max. load capacity: 6300 kg, span: approx. 20,000 mm, with electric trolley, bottle hook and floor control Crebu Ujwact Hjkawjb

Condition: used, Functionality: unexamined, Bread slicer Crobuevktmmo Ukawsb Wabäma model: Allround Economy Plus 380.200 max. number of slices: 100 pieces/min. max. bread dimensions: 380 x 200 x 140 mm, WxDxH Knives made of high-quality Teflon special coating Mobile machine cutting thickness adjustable from 4 to 20 mm Connection 400V, 1.0 kW, 16A-CEE plug Dimensions: 1000 x 750 x 1150 mm, WxDxH Used machine We have a large selection of bread slicers in stock!

Condition: good (used), Year of construction: 2002, machine/vehicle number: 21161, Offer 23397 Technical data: - Saw blade diameter up to 350 mm - 2 saw blade spindle speeds 22 + 44 rpm - Mitre adjustable left + right up to 45° - Cutting range at 90° - round tube 115 mm - Square tube 105 x 105 mm - Solid material (saw blade 350 mm) 60 mm - Flat profile 140 x 80 mm - Cutting range at 45° - round tube 115 mm - Square tube 90 x 90 mm - Pneumatic material clamping vices - Coolant device - Dimension stop 1500 mm - Pneumatic connection 6 bar - Drive 400 V / 1.4 / 2.2 kW Crobusqmnhgo Ukawob - Space requirement approx. W 600 x H 1400 x D 900 mm - Weight approx. 300 kg

Condition: good (used), Year of construction: 2018, machine/vehicle number: 5454, Offer 23372 Hydr. welding turntable and tilting table - three axes - welding manipulator Technical data: - max. load capacity 4000 kg - Face plate diameter 1500 mm - min. Table height in horizontal position approx. 1070 mm - max. table height in horizontal position approx. 1780 mm - Face plate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 4.0 kW - Manual remote control for direction of rotation, swivel or tilt - E. foot switch - Space requirement approx. W 3000 x H 1070 x D 1650 mm Cobsqlahzeu Ukawjrb - Weight approx. 2500 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 1040, Offer 23342 Hydr. welding turntable and tilting table - three axes - welding manipulator Creboraiu Dsu Ukawjb Technical data: - max. load capacity 750 kg - Flat plate diameter 700 mm - min. Table height in horizontal position approx. 720 mm - Average table height in horizontal position approx. 920 mm - Max. table height in horizontal position approx. 1060 mm - Working height manually adjustable in 3 steps - Faceplate mot.rotatable + swivel or tiltable - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V - Connected load 1.5 kW - Manual remote control for direction of rotation, swivel or tilt - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg