Used Ajce Ab-400M for sale (87,873)

Condition: ready for operation (used), Year of construction: 2018, Volume flow: 12500Bm³/h, total pressure difference: 40mbar, motor power: 22kW, speed: 3000rpm, machine weight: 1275kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Fpslinjvzbg Njm Sleg

Condition: used, The company Thöni (based in Telfs in Tyrol) offers a total of 7 robots for sale. The robots were used in a combined system. This combined system went out of service in mid-2023. The control and operating units are included in each case. (except KUKA 888517) At Thöni, the prescribed maintenance intervals for systems and system components are always adhered to. All robots are ready for collection on EURO pallets (wrapped in foil) Robot 1: - Type: ABB IRB 1600-6/1.45 - Serial No.: 16-64734 - Operating hours: approx. 24,000 - Year of manufacture: 2014 - Note: Axis #2 with running noises Robot 2: Fpelinov Akvpsm Slog - Type: KUKA KR 140 L100-2 comp - Serial No.: 890033 - Operating hours: approx. 29,000 - Year of manufacture: 2008 Robot 3: - Type: KUKA KR 30-2 - Serial No.: 732854 - Operating hours: approx. 53,000 - Year of manufacture: 2004 Robot 4: - Type: ABB IRB 1600-6/1.45 - Serial No.: 16-67097 - Operating hours: approx. 25,500 - Year of manufacture: 2012 Robot 5: - Type: KUKA KR 30-2 - Serial No.: 766400 - Operating hours: approx. 2,000 - Year of manufacture: 2011 Robot 6: - Type: unknown - Serial No.: unknown - Operating hours: approx. 1,500 - Year of manufacture: unknown - Note: Was used directly in a machine (cooling lubricant) - poor appearance, good mechanical condition Robot 7: - Type: KUKA KR 140 - Serial No.: 888517 - Operating hours: approx. 44,000 - Year of manufacture: 2006 - Note: Electronics in the 5th axis - Weaknesses / Without control panel If you purchase all robots, an attractive package price is possible!

Condition: new, Year of construction: 2025, SELF-PROPELLED BITUMEN EMULSION SPRAYER BS-1000SP TM TICAB self-propelled Bitumen Emulsion Sprayer BS-1000-SP is the most powerfull mini bitumen emulsion sprayer among all TICAB mini sprayers. Spray bar 1,5m (7 nozzles) covers up to 2000 sq.m per hour. Tank 1000 L. Repair work in the shortest possible time both on small areas (household areas, alleys) and on the bigger areas. Self-propelled system fits any trailer. Car is needed just to move the BS-1000-SP sprayer to the construction side. It makes using the sprayer much easier and increases its maneuverability. Operate remotely using a joystick. Specifications: Gasoline engine – 16 hp; Productivity – 30 l/min; Spraying width – 1.7 m; System cleaning – 3-level, diesel fuel; Self-pumping function of the tank; Installation on a frame or on a trailer at the customer's request; Heating system of the emulsion tank; Tank – 1000 l; Possibility of connecting an extra compressor for spraying bar cleaning; Thermal sensor – mechanical; Burner – propane; Hand spraying rod; Self-propelled traction hydraulic wheel. Felinjvpg Izem Slopg

Condition: like new (used), ABB 15 kw electric motor Fpolieqy Db Usnm Sljg

Condition: used, Year of construction: 2020, _____Basic engine Aebi MT750, EU6C, 156HP, 6 cylindersUsedapprox. 17,055 kmapprox. 1,141 operating hoursSpeed/driveSpeed limit 85 km/h, 7.5 tPermanent 4x4 drive with lockable center differential Differential lock rear axleDifferential lock front axleWheelbase/suspensionWheelbase 2.75 mSeatsComfort seat with pneumatic self-adjustment for driverBench for two people with toolboxTires245/70 R 17.5 (143/141J) 17.5 x 6.75 SINGLECabinCabin color orange RAL 2011 Air conditioning including reversible fan Heated exterior mirrors3-pin socket outside for winter service lighting Winter service lighting with two headlights13-pin socket outside for rear attachment for trailer operationHydraulics3rd circuit: 14.4 cc pump movement hydraulics & 21.1 cc pump1st Front additional valve for movement hydraulics right 1x DW2. Front additional valve for movement hydraulics left 1x DW power take-off on the reduction gear max. 82 KW SAE4, mandatory for semi hydrostaticMiscellaneousRadio DAB+/Bluetooth/USB Corrosion packageWork lights on tripod on rear wall of cabinRed/white warning markingsFront device plate DIN B (size 3)Trailer coupling ball head 3.5 t (type DEDALO GS501)Automatic trailer coupling 3.5 tRear axle single, standard springsClutch boosterCustomer special equipment1243193-2 Rear view camera1279441-6 Tires 245 with snowflake symbol1224041-6 Second work light1270690-3 Preparation light barHydrostat MT740/MT750Torsion frame Aebi MTMT750 Three-way tipper ProfiParking heater Aebi MT740/750-----incl. Snow plow VPL24Year of manufacture 2020P68-35025015 Plow VPL-24161353 Scraper combo 36 (VPL-24)P68-35000230 Parallelogram with mounting plate size 3P68-35080098 Hydraulic super swivel with DBV - 12 Volt (VPL-15/18/21/24/27/30)440902 Hydraulic couplings for MULTICAR (Flat Face)P68-35060360Set of hydraulic hoses VPL super swivel with DBV313113 Sliding shoe, complete VPL (set)357461 Warning flags with plastic handle (set)P68-12VOLT 12 Volt,Storage location:93095 Hagelstadt Fpolinmorddhgj Slog

Condition: used, Payload: 0/60 Kg Arm reach: 1.96 mmNumber of Axis: 6 Repeatability: 0.06 mm Robot weight: 1040 Kg Mounting: Floor Folsihgproinm Sljpg

Condition: ready for operation (used), Year of construction: 2014, Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Fpjlinevzbhaem Sleg

Condition: good (used), face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW, face driver -Type: MS5 -Front dimension: Ø 65 mm -Number: 8x centering tips available -Price: per piece -Recording: see photos Fpslinmjrv Avnj Slsg -Total dimensions: Ø 74 x 220 mm -Weight: 2.9 kg/piece

Condition: new, Year of construction: 2025, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. Fpjlinm Sevpp S Nolog -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: good (used), Year of construction: 1999, The maximum working area is 3000 x 1600mm Fpolijg Np Raonm Slog Minimum working area 390 x 420mm 2.2kW engine Weight 1500 kg

Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: GM3000.10000 H-202.41.10000.4E 160.20, Load capacity 3.2t Reeving 4/1 Lifting height 10m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Fsliovx E Ncjnm Slepg Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Condition: used, Payload: 0/180 Kg Arm reach: 2.55 mmNumber of Axis: 6 Repeatability: 0.07 mm Robot weight: 1700 Kg Mounting: Floor Fjlinmoh Au Hmo Slepg

Condition: new, Stromab TR601 crosscut saw Three-phase motor with a power of 9,2 kW ( 12 HP ) Motor rotation - 2636 rpm. Folieq R Tr Esnm Slspg Blade diameter - 600 mm Blade opening - 30 mm Max cutting width - 660 mm Max cutting height - 200 mm Zapadki for cutting to the desired length Hydraulic workpiece clamping and blade movement Cutting speed adjustment Maximum working pressure - 70 bar Output for sawdust extraction fi 100 mm Table left long 215cm and right 200cm Weight 700 kg * CE certificate New machine Machine available from Italian stock

Year of construction: 2012, Condition: good (used), Generator, emergency power generator, generator, aggregate, power generator, power generator, emergency power generator, generator set -Manufacturer: SAB, generator set type D-4107 F -previous use: ship -Power: 44/55 kW/kVA 50 Hz -Engine: Deutz type BF 4M 2012 60 kW -Generator: Marelli type MJB 200 MA 4 -Remark: without control, without cooling Folinm Seh I Ez Doljpg -Individual components: see photos -Dimensions: 1630/710/H1060 mm -Total weight: 840 kg

Year of construction: 2005, Condition: good (used), machine/vehicle number: C9 15840, Profile brushing machine Tagliabue LB 2 Model: LB 2 TECHNICAL DATA: Year of manufacture: 2005 Fpeliog Rn Iajnm Sleg Tagliabue edge sander with 4 oscillanting sanding units. Two vertical rollers and 2 inner transversal rollers, for transversal brushing.

Condition: ready for operation (used), Immediately available from the customer's factory (machine in use) Subject to prior sale and availability PLATE-EDGE-MILLING-MACHINE / PLATE-EDGE-MILLING-MACHINE PLATE-EDGE-MILLING-MACHINE MADE BY / MADE BY MODEL / TYPE YEAR OF PRODUCTION/ NEW 1984 approx./approx Fpjlinmjvdx S Uj Slsg ZUSTAND/CONDITION Betriebbereit / ready for use LIEFERZEIT / DELIVERY-TIME SOFORT / IMMEDIATELY Längsvefahrweg X Travel longitudinal X 15,900 mm Horizontal feed Z Horizontal travel feed Z 790 mm Vertical feed Y Vertical travel feed Y 500 mm Swivel range of milling spindle Swivel of milling spindle +/- 45 °/degrees Drive power Power 50 kw Milling spindle diameter Milling spindle dia 160 mm Tool holder Taper ISO 50 DIN 2079 Spindle speeds stepless Spindle speeds stepless 50-500 rpm Weight of machine Weight of machine 23.000 Kg

Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Fsliovx E I Ssnm Slspg Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Flange width 300mm Several immediately available in stock

Condition: used, Payload: 0/235 Kg Arm reach: 2.55 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 1310 Kg Mounting: Floor Fjljh Di Uyoinm Slspg

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm Fpslijvb Ixljnm Sljg - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: new, Year of construction: 2025, TITAN DOUBLE Trade Industrial Company AB is a Polish manufacturer of modern professional equipment trusted by professionals in over 55 countries worldwide. Industrial printer TITAN DOUBLE is designed for inkjet large format contactless full-color CMYK printing. OUR ADVANTAGES = YOUR BENEFITS: TITAN DOUBLE The new printing machine from TICAB PRINT has two print heads. Now, you can print in a single pass on large items. Your benefits: • Enhanced workflows. • Wider range or samples to print on. • More comfort during printing. We are official partners of the Hewlett Packard Company. You can get the TITAN DOUBLE printing machines at the manufacturer’s price. Online education and full technical support is provided. KEY FEATURES of TITAN DOUBLE: 1) Average printing speed is 50 units per minute. 2) The opportunity to print from 1 copy without increased cost per piece. 3) No preparations or cliches are needed. 4) Low cost per copy is from 0.01 euro/unit (you will see an accurate amount on the monitor during printing). 5) Printing on different materials: paper, carton (assembled and disassembled boxes), textile, wood, and plywood. 6) Branded software from TICAB PRINT (included in the printer's price). Fpelinmsvt Uvzo Sleg 7) Printer's components and accessories of our own design and production. TITAN DOUBLE is an innovative printing system. It allows you to feed huge items beneath the printer head. Printer heads can be adjusted up to 10 cm above the conveyor belt. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches. and water after the image dries. Technical Characteristics of the Printer head: Print area width - up to 59.4cm (23.4 in) Print area length - from 2.54 cm (1 inch) to 91.44 cm (36 inch) Workpiece movement speed - up to 45.72 cm (18 in) per second Printing speed - up to 50 arc\ min A4, up to 16 arc\ min A3 Print resolution - 1200x1200dpi Colors - CMYK (Cyan, Magenta, Yellow, Black) Ink type - water-based pigment ink Information connection - Ethernet 10/100/1000 Base-T network port Operating system - Windows (recommended Windows10) Hewlett Packard HP driver TICAB software: The current status of the printer is being monitored. Number of prints is calculated - the total and the current task. The calculation of the value of ink consumption. Monitoring the current level of ink in the cartridges. Starting the printer nozzle maintenance and cleaning functions. Starting the procedures for replacing the cleaning mechanism. Calibrate the printer nozzles for linearity and color uniformity. Start the procedure for high-speed printing of a large number of copies.

Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2t Reeving 4/1 Fjlinm Sjvx E Ixjljpg Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 3M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock

Condition: used, Payload: 0/16 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.03 mm Robot weight: 0 Kg Mounting: Floor Foloihgpveinm Slopg

Year of construction: 2025, Condition: new, Functionality: fully functional, machine/vehicle number: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2t Reeving 4/1 Lifting height 6m Lifting speeds 5/0.8m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Control voltage 230V Fjlinmsvx E Ils Slepg Flange width 300mm Available immediately in stock

Condition: used, Payload: 0/4 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 250 Kg Mounting: Floor Folish Au Inonm Sljpg

Condition: used, Payload: 0/7 Kg Arm reach: 1.80 mmNumber of Axis: 6 Repeatability: 0.03 mm Robot weight: 380 Kg Mounting: Floor Fpjlinm Seh Au I Ieljg