Used Isal Pb200 Gpl for sale (279)

Condition: used, Year of construction: 2007, operating hours: 70,000 h, clamping force: 120 kN, screw diameter: 35 mm, displacement volume: 154 cm³, injection pressure: 2,175 bar, overall weight: 7,300 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Crobu Taroqy Uklolsb Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 70.000 CLAMPING UNIT: - Clamping force: 120 t Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Einspritzdruck: 2.175 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 7.300 kg Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: used, Year of construction: 2020, Functionality: fully functional, EP 120 V Crobuov Imlds Tarleb Equipment: - Torsion-resistant press box with replaceable floor wear plates - Press piston in heavy design with height-adjustable stable rollers (thus adjustable knife gap) - Pre-installed inclined knife, thus higher cutting forces and a shock-free cutting mechanism - Knife fastening using an innovative screw system and thus easy knife replacement possible - Counter knife system with large cutting clearance angle and optimal cutting geometry - Drive of the needle carriage unit via a robust chain and side guide mounted on rollers (everything adjustable) - Two individually mounted retaining teeth on each press frame side (material expansion in the press shaft is thus avoided) - Extremely stable channel adjustment with oversized adjustment cylinder - Menu-controlled material selection with type and bale length preselection - Control cabinet with manual controls and touch panel with simple operating instructions - Demand switching of the main pumps for energy-efficient Pressing operation - All required safety standards and safety locks Technical data: - Pressing force of 120 tons - Length of the channel baler: approx. 12,700 mm - Height of the channel baler: approx. 3,600/4,300 mm - Weight of the channel baler: 32 t - Filling opening: 1,000 mm x 2,000 mm - Channel cross-section: 750 mm x 1,100 mm - Bale weight: 600 - 900 KG - Bale format: H=750 mm x W=1,100 mm - Pressing force of the press ram: 120 t - Pressing power: Main pump drive: 2 x 55 kW // Oil tank volume: 2,720 liters - Noise reduction hydraulic unit: Sound pressure level - Automatic 5-fold vertical bale strapping for wire thicknesses from 2.8 mm to 3.8mm - Piston slide principle: needle slot cover - Wear-resistant Hardox base plate in screwed design - Horizontal cylinder bracket: This counteracts misalignments of the press plate due to wear - Articulated bearing on the cylinder piston - Rails of the press plate Hardox screwable and replaceable - Adjustable rollers of the press plate - Path-distance measuring system integrated in the cylinder, optimal position detection of the press ram - Hydraulic oil

Condition: used, mileage: 10 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 4,320 mm, first registration: 07/2024, fuel tank capacity: 71 l, color: black, number of seats: 3, Year of construction: 2024, Equipment: air conditioning, airbag, cruise control, immobilizer system, navigation system, onboard computer, sliding door, = Additional Options and Accessories = - 7" MBUX - Adaptive Cruise Control - Android Auto - Apple CarPlay - Automatic Low Beam - Heated Exterior Mirrors - Passenger Airbag - Blind Spot Monitor - Individual Right-Hand Seat - Electric Front Windows - Electrically Adjustable Exterior Mirrors - Driver's Airbag - Remote Central Locking - Rear Doors with 270° Opening Angle - Height-Adjustable Driver's Seat - Height-Adjustable Steering Wheel - LED Taillights - LED Headlights Cobu Teuuf Iysarlerb - Leather-Wrapped Steering Wheel - Front Center Armrest - Multifunctional Steering Wheel - Rain Sensor - Tire Pressure Monitoring - Reversing Camera - Driver's Seat with Suspension - Right-Hand Sliding Door - Soft-Close Sliding Door - Ignition Interrupter - Thermal Glass - Partition = Additional Information = General Information Number of Doors: 5 Model Range: June 2018 - 2025 Cabin: Single License plate: V-32-GPL Technical information Torque: 440 Nm Number of cylinders: 4 Engine displacement: 1,950 cc Transmission: 9-speed, automatic Dimensions Length/Height: L3H2 Dimensions (L x W x H): 430 x 178 x 196 cm Weights Unladen weight: 2,489 kg Payload: 1,011 kg GVW: 3,500 kg Maximum towing capacity: 2,000 kg (unbraked 750 kg) Consumption Average fuel consumption: 9.5 l/100 km Urban fuel consumption: 10.5 l/100 km Extra-urban fuel consumption: 8.9 l/100 km Warranty Factory warranty until: 01.07.2026

Condition: ready for operation (used), machine/vehicle number: 108299, Condition Used Stock Number 31397 This listing is for a GE Healthcare GeneQuant 1300 Spectrophotometer. The unit is in full working condition and is ready for immediate release. Unlock the full potential of your laboratory with the GE Healthcare GeneQuant 1300 Spectrophotometer, a cutting-edge UV/Visible instrument specifically designed for accurate measurement of nucleic acid and protein concentrations, as well as bacterial cell culture density. This versatile device is essential for researchers seeking reliable and precise analytical performance. Crjbujuybc So Tarlsb Key Features: Wide Wavelength Range: Operates between 190-1100 nm, allowing for extensive applications in life sciences, including nucleic acid purification and protein assays. User-Friendly Interface: With the convenience of one-touch calibration curves, kinetics, or ratio measurements, the GeneQuant 1300 simplifies complex analyses. Customizable Analytical Performance: Save up to 90 custom methods in a dedicated folder with optional password protection, ensuring secure and efficient data management. Visual Inspection Capabilities: Quickly detect impurities in nucleic acid scans, particularly beneficial for RNA samples. Technical Specifications: Wavelength Calibration: Automatic upon switch-on for hassle-free operation. Spectral Bandwidth: 5 nm for precise measurements. Wavelength Accuracy: ± 2 nm and Wavelength Reproducibility: ± 0.5 nm for reliable results. Light Source: Long-life stabilized Xenon lamp for consistent performance. Dimensions: 260 × 390 × 100 mm with a weight of 4.5 kg, making it compact and easy to integrate into any lab setup. Power Requirements: Compatible with 100–240 VAC ± 10%, 50/60 Hz. Benefits: Convenient Data Output: Results can be printed via an optional integrated printer or sent to a PC using USB or wireless Bluetooth accessories, enhancing data accessibility. Robust Design: The press-to-read feature reduces lamp-on time, while optics with no moving parts minimize the risk of optical misalignment. The GE Healthcare GeneQuant 1300 Spectrophotometer is the ideal tool for life science applications, providing researchers with the reliability and precision necessary for successful experiments. Elevate your laboratory's capabilities and ensure accurate results with this exceptional spectrophotometer!

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation Cjbusvv E Hij Tarlerb The blow molding machine includes technical manuals and safety protections.

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 15,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 7,000 rpm, X-AXIS STROKE 15000 MM Z-AXIS STROKE 1500 MM Y-AXIS STROKE 3000 MM SPINDLE CONNECTION ISO 50 DIN 69871 SPINDLE MOTOR POWER 42 KW MAX SPEED 7000 RPM 1180 Nm CNC HEIDENHAIN iTNC 530 HSCI 80-PLAN TOOL CHANGER AUTOMATIC MILLEMISAL HEAD 0.001 ° X 0.001 ° HORIZONTAL SPINDLE EXTENSION 400 MM HORIZONTAL SPINDLE EXTENSION 600 MM Cebusv Hbf Ao Tarlsrb HEAD PICK UP HYDROSTATIC ROTARY TRANSLATING TABLE 2500 X 2000 MM CAPACITY 30 TON, CONTINUOUS POSITIONING INTERNAL COOLANT 40 BAR AND EXTERNAL COOLANT 4 BAR 2000 LITRE TANK WITH PAPER FILTER TRANSVERSAL CHIP CONVEYOR 4300 MM PLACED ON THE RIGHT SIDE STATIC RTCP IN SPACE AUTOCAL , AUTOMATIC CALIBRATION SOFTWARE FIXED PLATES YOM 2015

Condition: used, Year of construction: 2001, operating hours: 80,000 h, clamping force: 200 kN, screw diameter: 50 mm, displacement volume: 471 cm³, injection pressure: 2,058 bar, overall weight: 9,000 kg, Manufacturer: Ferromatik, Type: MV200-970, Condition: running production, Operating hours: approx. 8 Clamping force: 200t, Screw diameter: 50 mm, Injection weight in polystyrene: 405 g, Stroke volume: 471 cm³, Injection pressure: 2,058 bar Payment: 100% prior to delivery Manufacturer: Ferromatik Type: MV200-970 Condition: aus laufender Produktion Operating hours: ca. 80.000 CLAMPING UNIT: - Clamping force: 200 t Öffnungsweg: 750 mm Mould installation height min.: 300 mm Mould installation height max.: - Tie bar distance (h x v): 560 x 560 mm Csbu Taroh Udineljrb Plate dimension (h x v): 840 x 822 mm Centering (fix- movingplate): 16 mm INJECTION UNIT: IU970 Screw diameter: 50 mm Injection weight in polystyrol: 405 g Stroke volume: 471 cm³ Einspritzdruck: 2.058 bar CONTROL: IQT44 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 18,8 kW Pump drive power: 37,0 kW Total installed power: Motor + Heizung Total weight: 9.000 kg Total size L x B x H: 5,5 x 1,9 x 2,4 m

Condition: new, power: 390 kW (530.25 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 6x4, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, permissible total weight: 18000kg, fabric seats, interior color anthracite, 1 x airbag, intarder, tachograph, electronic braking system EBS, electric stability program ESP, stationary air conditioning, driver's seat with air suspension, LED headlights, radio with MP3, leather steering wheel, power steering, electric windows, roof hatch, electric outside mirrors, immobilizer, central locking, cool box, Day Cab mechanical cab suspension Passenger seat: cinema with fabric cover Adaptive Cruise Control with FCW and AEBS-3 Lane change warning system Front: 8.00 t, parabolic, 167N Goodyear RR, not applicable Emissions class Euro 6 Automated transmission, TraXon, 12 gears Standard component arrangement Fuel tank on the left PACCAR Connect Guarantee Plus drivetrain-3 years-200,000 km Tipper V1 transmission- PTO, PlugPlay, BB-CAN-Strg Flexible cab step Signal horns, prepared Two LED headlights for rear cab wall Beacon lights on front cab, prepared Windshield with sun protection film Rear window: Double glazed No front mirror DAF Corner View Central locking, 2 keys, 2 remote controls Steering wheel, leather Door trim: Loosely woven fabric Driver's seat: Luxury Air Armrests on both sides of the driver's seat Dashboard table Cool box or refrigerator LED interior lighting Automatic cab climate control Auxiliary heating with waste heat pump and timer Roller blind on driver's side Roof hatch with electrical operation FMS connector, extended and prepared Digital tachograph, VDO 1C, version G2V2 Speed limit setting 90 km/h DAF Infotainment Luxury Plus, Luxury Speakers Antennas: Radio, 2x mobile phone, GNSS Extra: CB wireless charger Reversing alarm system Front axle(s): 385/65R22.5 F1, 385/65R22.5GO OMTSHL 164/000 K Steering CBB 3P R1, 315/80R22.5GO OMTD 156/150 K Traction DBB MX-13 engine, 390 kW/530 HP Cab emblem: 530 ECO power off-road with rocking function Rear axle ratio 3.61 OBD-E Engine H5 Fuel B7 Model year 202 Cebu Tasvr N Ngsrljrb

Year of construction: 1963, Condition: used, Functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Crsbu Tetyqizearlob Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: new, Functionality: fully functional, Year of construction: 2024, operating hours: 1 h, machine/vehicle number: LD00231008624, overall weight: 790 kg, empty load weight: 790 kg, fuel type: electric, maximum load weight: 230 kg, operation weight: 790 kg, chain condition: 100 %, Equipment: rubber tracks, Crawler work platform Tracked work platform CAPRI 04-06 We offer you; Crawler work platform Cabri 04-06 New machine Working height 6.5 meters Platform height 4.5 meters Machine dimensions: Machine length: 1380mm Width machine: 790mm Machine height 2110mm Height platform folded 1715mm Length platform (retracted) 1340mm Length platform (extended) 2759mm Platform extension: 595mm Platform dimensions: 1340x750x1115m Load capacity: 230kg Load capacity platform extension: 100kg Turning circle machine: 0 meter Drive motor 24V/0,8KW Batteries 2xDC 24 V Charger integrated 24V/15 A Machine weight 790kg Advantage Cabri platforms: ECU & control unit from brand manufacturer installed Improved batteries installed Fully electric operation Immisson free working Cjbjrhwv Rou Tarlsrb stronger crawler chassis non-marking tracks Robust construction The machine weight is distributed over a large area by the light caterpillar drive chains, which reduces the ground pressure. As a result, it is ideally suited for indoor use on sensitive floors with low load-bearing capacity. Non-marking tracks that leave no traces All-terrain tracked platform, up to 25% incline Ground obstacles can be overcome Also suitable for working on uneven ground Excellent traction reinforces grip on the ground Extremely maneuverable in confined spaces Low maintenance and servicing costs thanks to AC technology This advertisement does not constitute a binding offer, it is for illustrative purposes only. All information is given in good faith. Errors, typing errors and prior sale reserved You will receive an invoice with VAT shown. Shipping is possible for an extra charge. With kind regards Steffen Küster K. u. K. Maschinen GmbH Alter Flugplatz 30 49377 Vechta Registered office of the company: Vechta AG OL HRB 216489 Managing directors: Steffen Küster/ Lukas Kempf

Condition: repair required (used), Year of construction: 2008, Machine is operational and still in use, however has some technical challenges! Cobu Taovxuwcorlerb Following is noted: Image sometimes goes lighter/darker Image intensifier (orbital moving part) from time to time is misaligned on the axis and needs to be manually readjusted. Due to this also the fuse will disengage and middle section will misalign. This is the reason is is used in manual and not auto mode at this point. Will be sold as spares or for someone who is willing to rectify the technical challenges! Further information upon request!

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Csbovwf Enju Tarlerb

Condition: used, Year of construction: 2004, operating hours: 34,000 h, clamping force: 155 kN, screw diameter: 40 mm, displacement volume: 226 cm³, injection pressure: 1,985 bar, overall weight: 7,800 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Ferromatik Milacron Type: EE155-450 Condition: aus laufender Produktion Operating hours: ca. 34.000 CLAMPING UNIT: - Clamping force: 155 t Öffnungsweg: 440 mm Mould installation height min.: 200 mm Mould installation height max.: 590 mm Crjbsm Nny Asu Tarljb Tie bar distance (h x v): 520 x 520 mm Plate dimension (h x v): 780 x 780 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU450 Screw diameter: 40 mm Injection weight in polystyrol: 206 g Stroke volume: 226 cm³ Einspritzdruck: 1.985 bar CONTROL: IQT44 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x hydr. + 1 x pneum. Air valves: 1 Hot runner control devices: - Robot interface: Euromap 67 Other equipment: - GENERAL DATA: - Installed heating capacity: 13,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 7.800 kg Total size L x B x H: 5,2 x 1,6 x 2,1 m

Condition: used, Year of construction: 2006, Used Capping Machine AROL T stopper year 2006 Machine Description of the Capper AROL KAMMA PKV The machine is specifically designed for efficient and reliable bottling with T-stoppers in industrial settings. With its five heads, the machine precisely manages each step of the process. Consequently, it maintains closure quality consistently while operating at high production speeds. Cap Gripping System To ensure effective stability during cap positioning, the machine’s vacuum-based gripping system secures each cap, which significantly reduces the risk of errors or misalignment. Moreover, an integrated vacuum pump powers this mechanism, ensuring a firm and consistent grip on each cap throughout the process. Adjustable Capping Head One key advantage of the AROL capping machine is its adjustable-height capping head, which easily adapts to various bottle sizes. As a result, this versatility makes the machine suitable for different production formats. Therefore, it increases both efficiency and operational flexibility. Cap Distribution System An alveolar centrifugal distributor manages cap distribution, ensuring uniform and consistent delivery. Furthermore, this component minimizes the risk of jamming. Thus, it keeps the workflow continuous, which is essential for maintaining high and uninterrupted production. Safety and Materials Crebu Tevgvccoarlob The Used Capping Machine AROL T stopper year 2006 includes safety guards, which effectively protect operators throughout operation. Additionally, the machine’s stainless steel exterior provides strength and corrosion resistance, which are both critical for use in the food and beverage industries. Production Speed and Inverter Control Thanks to its inverter control, operators can easily adjust the machine’s speed, allowing it to meet specific production demands. Consequently, the AROL capping machine can reach a production capacity of approximately 7,000 bottles per hour. Thus, it offers an ideal combination of efficiency and flexibility to satisfy market needs. Bottle Flow Configuration With its left-to-right bottle feed (clockwise flow), the machine optimizes the production line layout. This setup, therefore, integrates smoothly into existing systems, reducing installation time. In turn, it supports continuous production and maximizes operational efficiency. Production Year of the Capper AROL KAMMA PKV Manufactured in 2006, the Used Capping Machine AROL T stopper combines reliability with proven technology. Even though it was produced years ago, the machine still upholds high-quality standards. Hence, it offers companies a reliable and versatile capping solution.

Condition: used, Functionality: fully functional, 0,75 kW Spraying device Lamella star 150/70/25 mm sisal/leather/plastic fabric Lamellar star 150/70/25 mm sisal/plastic fabric Flanges 70 mm reduced to 11 mm (2 pcs.) Metal Control panel top 4 motors à 0,18 kW for brushes Crebu Tjigaf Rearleb

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 189603, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, workpiece weight (max.): 30 kg, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 160, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS Travel X: 1,050 mm Travel Y: 800 mm Cobu Tajufx T Njrlorb Z travel: 880 mm Control system: MAZATROL 640M B-axis: 360 (0.001 index) ° Workpiece weight: max. 30 kg Tool magazine: 160 places Clamping surface: 630 x 630 mm MACHINE DETAILS Machine length: 6,400 mm Machine width: 2,600 mm Machine height: 3,200 mm Machine weight: 22.7 tons EQUIPMENT - Automatic pallet system (high rack) - Bigplus spindle - MP 10 measuring probe

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 24 m/min, spindle speed (min.): 1,000 rpm, power: 0.015 kW (0.02 HP), Machine details Cobsqi Ucnou Tarljrb Stock-No. 1105-03949 Type of machine Machining Center - Vertical Make MAZAK - CNC Type VTC 200 B Year of manufacture 2004 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis EX WORK Technical details x-travel 1460 mm y-travel 510 mm z-travel 510 mm Additional information With CNC control Mazatrol PC Fusion CNC 640M, ATC for 30 tools, With CNC control Mazatrol PC Fusion CNC 640M, ATC for 30 tools Technische Daten / technical details: Travel X / X-Travel 1120 mm Travel Y / Y-Travel 510 mm Travel distance Z / Z-Travel 510 mm Tischgröße / table size 1460x510 mm max. Tischbelastung / max. workpiece weight 800 kg Werkzeugschaft / spindle taper SK40 Drehzahlbereich steufenlos / spindle speed stepless 40-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 30 max. tool Ø / max. tool Ø 80 mm dito bei freien Nebenplätzen / max. tool Ø with free places besides 110 mm max. Werkzeuglänge / max. tool length 350 mm max. Werkzeuggewicht / max. tool weight 8 kg Vorschubbereich xy / feed range xy 1-8000 mm/min. feed range z 1-8000 mm/min. rapid traverse X/Y / rapid feed X/Y 30 m/min. Antriebsleistung / drive capacity 15 kW Weight of the machine approx. 6000 kg CHIP CONVOYER

Condition: new, Year of construction: 2025, The JMY-870 sharpener is an excellent tool for sharpening circular saw blades. The sharpener is equipped with a durable, diamond grinding disc. This ensures precise and effective sharpening. The solid cast iron construction guarantees stability during work, and the adjustment of the angle of inclination and the angle of the saw provide full control over sharpening. Additionally, rubber pads under the feet minimize noise, ensuring comfort of work. Standardly equipped with a 125 mm diamond grinding wheel, it is suitable for sharpening saws from 80 mm to 700 mm in size. The most important advantages of this circular saw sharpener The sharpener is equipped with a high-quality 125 mm diamond grinding disc, which guarantees extraordinary precision when sharpening carbide saws. The cast iron base ensures stability during work. Thanks to this, the user can be sure that the device will not wobble or vibrate during sharpening. The sharpener is equipped with a tilting blade support, which allows you to adjust the angle of inclination from -35° to +45°. This allows you to precisely adjust the blade setting to the specific needs of the user. An additional function is the ability to set the saw's incisal angle in the range from +85° to -30°, which allows you to adapt the tool to different types of saws. The saw sharpener has been designed with work comfort in mind. Thanks to the rubber pads under the feet, the device works almost silently, which has a positive effect on the comfort of use. Application of the saw sharpener The sharpener is designed for sharpening circular saws. The operation of the device is intuitive and simple, which means that even people who are not familiar with the technique will be able to use this tool. The JMY-870 circular saw sharpener is a professional tool that ensures high quality saw blade processing and work comfort. Thanks to the various adjustment options, it is an excellent choice for people who require a precise and effective tool for sharpening various types of saw blades. Cebu Tarju Tti Iolorb THE SET INCLUDES A DIAMOND GRINDING WHEEL! Technical parameters MIN/MAX SAW DIAMETER 80mm - 700mm HORIZONTAL SAW BLADE HOLDER TILTING -35° to +45° GRINDING SET TILTING -20° to +20° GRINDING DISC ROTATIONAL SPEED 2850 rpm DISC DIMENSIONS 125 x 10 x 13 mm MOTOR POWER 0.25 kW SUPPLY VOLTAGE 230 V NET WEIGHT 21 kg DEVICE DIMENSIONS 750 x 750 x 350 mm

Condition: used, Year of construction: 2007, operating hours: 83,000 h, clamping force: 800 kN, screw diameter: 90 mm, displacement volume: 2,545 cm³, injection pressure: 1,917 bar, overall weight: 40,000 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Ferromatik Milacron Type: Maxima MM 800-4880 Crebu Taouwz Ddsrleb Condition: aus laufender Produktion Operating hours: 83000 CLAMPING UNIT: - Clamping force: 800 T Öffnungsweg: 2250 mm Mould installation height min.: 400 mm Mould installation height max.: 1200 mm Tie bar distance (h x v): 1400 x 1080 mm Plate dimension (h x v): 1800 x 1480 mm Centering (fix- movingplate): 200 INJECTION UNIT: IU4880 Screw diameter: 90 mm Injection weight in polystyrol: 2188 g Stroke volume: 2545 cm³ Einspritzdruck: 1917 bar CONTROL: Mosaic Screen language: DE / EN / FR Operating manuel: DE EQUIPMENT: - Core pulls: 6 Hot runner control devices: 16 Robot interface: Euromap 67 Other equipment: Wittmann W733: x-900mm, y-1.800mm, z-4.000mm, C-90°, A-9 GENERAL DATA: - Installed heating capacity: 55 kW Pump drive power: 130 kW Total installed power: Motor + Heizung Total weight: 40.000 kg Total size L x B x H: 9,9 x 3,1 x 2,9 m

Condition: like new (used), Year of construction: 2017, operating hours: 1,649 h, Functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, torque: 117 Nm, workpiece weight (max.): 800 kg, total height: 3,510 mm, total length: 2,400 mm, total width: 2,750 mm, table width: 520 mm, table length: 1,200 mm, table load: 800 kg, overall weight: 8,500 kg, spindle speed (min.): 12,000 rpm, spindle motor power: 18,500 W, space requirement height: 3,510 mm, space requirement length: 2,400 mm, space requirement width: 2,750 mm, Equipment: rotational speed infinitely variable, This extremely stable CNC milling center is suitable for the mass production of smaller parts. Both vertical spindles work in parallel in the same motion sequence and thus enable a productivity of the system of approx. 1.75 compared to a single-spindle machine of the same type with the same space requirement as a single-spindle machine. - The W-axis enables simple adjustment of the tool lengths of both spindles. - Distance between the spindle centers 400 mm. - Two tool changers with 30 tools each Crjbu Tjuqk Ikjarlob - BIGPLUS BT 40 tool holder. - High-pressure cooling through the spindle with 2 MPa and 4 kW - Tool breakage monitoring by means of effective power measurement - Transportable handwheel - 4th axis preparation

Condition: used, Year of construction: 2001, operating hours: 60,790 h, clamping force: 60 kN, screw diameter: 18 mm, displacement volume: 224 cm³, injection pressure: 2,224 bar, overall weight: 3,350 kg, Min. mold height 15mm_Max. platen distance 575 + mm Payment: 100% prior to delivery Manufacturer: Battenfeld Type: BA600-50CDC Condition: überarbeitet Operating hours: 60.790 CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 425 mm Mould installation height min.: 350 mm Mould installation height max.: - Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 490 x 490 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Injection weight in polystyrol: 20,4 g Stroke volume: 22,4 cm³ Einspritzdruck: 2.224 bar CONTROL: Unilog 4B Screen language: DE Operating manuel: DE EQUIPMENT: - Crobuoh Tk Rve Tarleb Core pulls: ! Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: 3,6 kW Pump drive power: 11,0 kW Total installed power: Motor + Heizung Total weight: 3.350 kg Total size L x B x H: 4,0 x 1,5 x 2,1 m

Condition: used, Year of construction: 2001, clamping force: 60 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,750 bar, overall weight: 5,000 kg, electric dosing: 15 kW electrc clamping: 9,8 kW You can find all technical data on our homepage! Cebu Tareh Nvnwolerb Payment: 100% prior to delivery Manufacturer: Demag Type: Ergotech EL EXIS S 6 Condition: technisch überarbeitet CLAMPING UNIT: - Clamping force: 60 t Öffnungsweg: 350 mm Mould installation height min.: 160 mm Mould installation height max.: - Tie bar distance (h x v): 370 x 370 mm Plate dimension (h x v): - Centering (fix- movingplate): - INJECTION UNIT: - Screw diameter: 30 mm Injection weight in polystyrol: 100 g Stroke volume: 106 cm³ Einspritzdruck: 2.750 bar CONTROL: NC4 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Euromap 12 GENERAL DATA: - Installed heating capacity: - Pump drive power: 5,5 kW Total installed power: Motor + Heizung Total weight: 5.000 kg Total size L x B x H: 4,6 x 1,5 x 2,0 m

Condition: used, Year of construction: 2006, operating hours: 55,500 h, clamping force: 50 kN, screw diameter: 22 mm, displacement volume: 29 cm³, injection pressure: 1,939 bar, overall weight: 3,200 kg, all belts had been renewed terms of delivery: FCA Pegnitz Crsbu Tarjnvnptolsb delivery time: shortly on request terms of payment: 100% prior to delivery Manufacturer: Ferromatik Milacron Type: EE50-55 Condition: technisch überarbeitet Operating hours: ca. 55.500 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 260 mm Mould installation height min.: 150 mm Mould installation height max.: 410 mm Tie bar distance (h x v): 320 x 320 mm Plate dimension (h x v): 470 x 490 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU55 Screw diameter: 22 mm Injection weight in polystyrol: 26 g Stroke volume: 29 cm³ Einspritzdruck: 1.939 bar CONTROL: Mosaic Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: 2 Hot runner control devices: 16 Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 4,8 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.200 kg Total size L x B x H: 4,0 x 1,6 x 1,9 m

Condition: used, Year of construction: 2005, operating hours: 65,000 h, clamping force: 155 kN, screw diameter: 35 mm, displacement volume: 173 cm³, injection pressure: 2,445 bar, overall weight: 7,800 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: FM Type: EE155-450 Condition: technisch überarbeitet Operating hours: ca. 65.000 CLAMPING UNIT: - Clamping force: 155 t Öffnungsweg: 440 mm Mould installation height min.: 200 mm Mould installation height max.: 590 mm Tie bar distance (h x v): 520 x 520 mm Plate dimension (h x v): 780 x 780 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU450 Screw diameter: 35 mm Csbusttdabo Tarlorb Injection weight in polystyrol: 158 g Stroke volume: 173 cm³ Einspritzdruck: 2.445 bar CONTROL: Mosaic Screen language: DE Operating manuel: DE EQUIPMENT: - Air valves: 1 Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Installed heating capacity: 13,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 7.800 kg Total size L x B x H: 5,2 x 1,6 x 2,1 m

Condition: used, Year of construction: 2004, operating hours: 81,500 h, clamping force: 80 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 2,210 bar, overall weight: 5,200 kg, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC 200/80 Power Condition: aus laufender Produktion Operating hours: ca. 81.500 CLAMPING UNIT: - Clamping force: 80 t Öffnungsweg: 450 mm Mould installation height min.: 250 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 670 x 600 mm Centering (fix- movingplate): 125 / 125 mm INJECTION UNIT: IU200 Screw diameter: 30 mm Injection weight in polystyrol: 90 g Stroke volume: 99 cm³ Einspritzdruck: 2.210 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: ja / yes Hot runner control devices: - Robot interface: Euromap 67 GENERAL DATA: - Csbu Tajqym Rgorljrb Installed heating capacity: 6,8 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 5.200 kg Total size L x B x H: 4,0 x 1,4 x 2,0 m