Used Isal Pb55 Sh for sale (63,366)

Year of construction: 2003, Condition: good (used), Weishaupt gas burner Monarch Burner type G7/1-D Version ZMD Power 300 - 1750 KW Deln Umemdpczo Swecg Including gas line ( gas fitting ) Burner was recently in operation

Condition: new, Year of construction: 2024, Functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. Dcsln Umol Dw D Es Swsg This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the F600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=2 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. Machine can be viewed by appointment in Bergeijk and is used as a showroom machine (machine is currently still being built up). Machine has 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: good (used), Functionality: unexamined, overall weight: 90 kg, input voltage: 240 V, input frequency: 60 Hz, type of input current: AC, Used Shimadzu Turbo Molecular Pump TMP H3135LMC with TMP Power Unit (EI-C3153M) Magnetic Bearing Manufacturer: Shimadzu Corporation Model: TMP-H3153LMC (S3) + EI-C3153M (S3) Max RPM: 24000 Voltage: ~200-240V (50/60Hz) VA: 1.5K Total Weight: ~ 90kg (ex pallet) Doln Um Sjv Dfyrswocg

Year of construction: 2012, operating hours: 249 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 7-P-4, Vacuum casting system including oven VGO 700 from Binder and accessories. Djln Uov E Nm Sjm Swjcg

Condition: new, Functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Dsln Umoq Nfvuo Swecg Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: ready for operation (used), Mitsubishi FX01B BN624A236H05 card, used, normal signs of use, 100% functional Dsln Umsi Eb H Ao Swjcg

Condition: new, wheelbase: 3,350 mm, gearing type: mechanical, Equipment: ABS, air conditioning, = Additional options and accessories = - Tachometer = Remarks = Model description: MITSUBISHI CANTER CARGO BODY,170L TANK (4×2) 4.2 TON DIESEL MY24 Light Duty Code Diesel Max Output: 113 PS @ 3200 RPM Max Torque: 31 KGF.M@ 1600 RPM Gear Box: 5 forward + 1 reverse Shipping Dimension: 6.15 X 2.20 X 2.2 m (LXWxH) Brakes: Exhaust brake Cargo Body Size: 4.3 X 2.18 X .038 m ( LXWXH) Tire: 7.50R16 119/117 Battery: 25 Volt, Regulated control - 12 Volt X2 year of manufacture: 2024 Tool set & Jack Fabric seat Interior Rear View Mirror Sunvisor (D+P) Antenna 2 Speakers Harness Djln Um Ssuxp Awjwecg Floor Console Cup Holder Halogen head lamps Reverse warning buzzer Water separator in fuel line LED Room Lamp Cigeratte Lighter Silvered Color Wheel Laminated wind shield glass Vinyl Floor Mats Tilt & Telescope Steering Wheel Speed Indicator Warning = More information = Empty weight: 2.305 kg Carrying capacity: 4.200 kg GVW: 6.500 kg Dimensions (LxBxH): 603 x 204 x 221 cm Fuel tank: 170 litres Number of seats: 3 Power steering: hydraulic

Condition: good (used), Please send us your offer. Doln Umju Rb Enj Swscg Accessories without guarantee. The following applies: "Property purchased as seen". The prospective buyer must convince himself of the completeness of the property on site.

Year of construction: 2025, Condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. Dolev S Dk Son Um Swscg 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 1QJ071, Processable materials: Metals in powder form. These include, for example, stainless steels and tool steels, aluminum alloys, nickel-based alloys and titanium alloys. You can find more information about materials and surface quality on our homepage. Weight (net): 1,870 kg Laser type: Ytterbium fiber Laser power: 1 × 500 W Dimensions: 2,165 mm x 1,236 mm x 2,130 mm (L x W x H) Dcoljv Ewpnjn Um Sweg Build space (1) 250 mm × 250 mm × 350 mm (L x W x H) Powder layer thickness: 20 μm to 120 μm Typical process speed (3): 2 m/s (max. 10 m/s) Build rate (2): Up to 254 cm³/h Beam focus diameter: 80 μm with dynamic focus Dynamic focus diameter: Up to 500 μm Beam wavelength: 1,070 nm to 1,080 nm Laser modulation frequency (max.): 20 kHz Build chamber atmosphere preparation time: 15 minutes (to < 1,000 ppm oxygen content) Filling/emptying system consumption: < 1,200 l Maximum argon consumption (during filling): 400 l/min Ongoing argon consumption (after initial filling): < 0.8 l/min Working pressure in chamber: 10 mbar to 20 mbar Argon gas supply connection: 3/8 in BSP male connector Argon quality: 20 ppm permissible impurity or better (99.998% purity) Power supply (4): 380 V to 480 V AC, 63 A, 50 Hz to 60 Hz, 3-phase Data connections (5): Standard RJ45 network connection. Renishaw recommends using Cat 6 power cables. Ideal operating temperature (7): 18°C to 22°C (min./max.: 15°C to 28°C) Ideal relative humidity (7): < 60% (max. < 80%) Clearance under machine (excluding base): 146mm Optical module protection class: IP5X Noise level: ≤ 70dB Compatible software: QuantAM, InfiniAM Camera, InfiniAM Spectral, Renishaw Central and selected third-party software (1) Build volume refers to the maximum build volume from wall to wall, however the usable area is usually smaller. The substrate plate is not included in the dimensions. (2) Maximum build rate does not include coating time and is dependent on parameters, part geometry and material. (3) Typical process speed depends on parameters, part geometry and material. (4) The calculated maximum load of the machine is 50 A, the nominal operating current is 32 A. (5) The user has the option to configure the network with their own control software. For more information see the RenAM 500 Series Additive Manufacturing System User Manual, Renishaw Part No. H-5800-3693. (6) Due to different electrical requirements in each country, the part numbers for the accessories may vary. Contact your country's customer service department if you have any questions about this. (7) Temperature and humidity must not be at the maximum specified at the same time and must remain below the value at which the dew point reaches 16 °C (61 °F) to avoid the formation of condensation on the laser components. See Site Preparation and Installation Guide for the RenAM 500 Series Additive Manufacturing System, Renishaw Part No. H-5800-3692.

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2025, An impact crusher is a machine that uses striking as opposed to pressure to reduce the size of a material. Impact crushers are versatile and widely used in various industries for the crushing of hard, abrasive materials. They operate by applying force on the material to be crushed, breaking it into smaller pieces. Here is a general introduction to impact crushers: The impact crusher is a versatile machine used for various applications in construction, mining, and recycling industries. Below are some of the key applications of an impact crusher: 1. Primary and Secondary Crushing Impact crushers are commonly used in both primary and secondary crushing stages. In primary crushing, they break large rocks into smaller, more manageable sizes, and in secondary crushing, they refine the material further into smaller grades. 2. Production of Aggregates Impact crushers are widely used in the production of aggregates for construction. They are effective at producing a wide range of materials, including: Crushed stone for road construction. Sand for concrete and asphalt production. Gravel for general construction and drainage. Dcsljq I N Iqen Um Swog 3. Recycling One of the most significant applications of impact crushers is in the recycling industry, especially for processing construction and demolition (C&D) waste, which includes materials like concrete, brick, and asphalt. The crushers help convert waste into usable products such as: Recycled concrete aggregates (RCA). Asphalt. Recycled sand and gravel. 4. Mining Industry Impact crushers are used in the mining industry to process ore materials. These crushers help break down large rocks and ores into smaller pieces, making them easier to process for extraction of valuable minerals like gold, copper, and other metals. 5. Production of Manufactured Sand In the production of manufactured sand for concrete, impact crushers are used to break down larger rocks into fine particles, which are then used as an alternative to natural sand. This is especially useful in areas where natural sand is scarce or environmentally protected. 6. Construction and Road Building Impact crushers are integral in the production of materials for road construction, such as base and sub-base materials. These materials are crucial for the stability and durability of roads, highways, and foundations. 7. Industrial Applications Impact crushers are also used in various other industrial applications, such as: Cement production: Crushing limestone and other materials for cement manufacturing. Glass recycling: Breaking glass waste into smaller pieces for recycling. 8. Demolition and Dismantling Impact crushers are used in demolition projects where buildings or structures need to be demolished and the materials crushed for reuse or disposal. They help reduce the size of debris like concrete, asphalt, and bricks into smaller, manageable pieces.

Condition: ready for operation (used), Mitsubishi / Mazak FX31C BN624A377 card, used, normal traces of use, 100% functional Dcelnei Eb H Uj Um Sweg

Condition: used, mileage: 136,000 km, power: 147 kW (199.86 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2011, emission class: euro4, tire size: -, Year of construction: 2011, fuel: diesel, MITSUBISHI PAJERO 3.2 TDI long version, ! FULLY EQUIPPED! * Displacement: 3,200cm³ * 147 KW / 200 HP * Automatic air conditioning, also adjustable in the rear * Cruise control * Automatic transmission * Multifunction steering wheel * Electrically adjustable full leather seats * Leather seats in the rear, foldable * Front seat heating * Ski bag * Central locking * 4 x electric front windows * XENON headlights * Electric adjustable mirrors * Electric panoramic roof * Tinted windows * Roof rails * Steps * Fog lights * Large CD navigation system * Telephone * Airbags and sidebags * Empty weight: 2,340 kg * Gross vehicle weight: 3,030 kg * Trailer hitch - towing capacity: 3,500 kg * Tires: 265/60 R 18 * Original Mitsubishi aluminum rims * Spare wheel: new! - New MOT / TÜV! - 1st hand Subject to errors and prior sale! Dcoln Usv Ey Aqem Swog

Year of construction: 2019, operating hours: 2,400 h, Condition: used, Functionality: fully functional, machine/vehicle number: 1QHY72, Processable materials: Metals in powder form. These include, for example, stainless steels and tool steels, aluminum alloys, nickel-based alloys and titanium alloys. You can find more information about materials and surface quality on our homepage. Weight (net): 2,040 kg Laser type: Ytterbium fiber Dcjln Um Sjv Ewaaswsg Laser power: 4 × 500 W Dimensions: 2,165 mm x 1,236 mm x 2,130 mm (L x W x H) Build space (1) 250 mm × 250 mm × 350 mm (L x W x H) Powder layer thickness: 20 μm to 120 μm Typical process speed (3): 2 m/s (max. 10 m/s) Build rate (2): Up to 254 cm³/h Beam focus diameter: 80 μm with dynamic focus Dynamic focus diameter: Up to 500 μm Beam wavelength: 1,070 nm to 1,080 nm Laser modulation frequency (max.): 20 kHz Build chamber atmosphere preparation time: 15 minutes (to < 1,000 ppm oxygen content) Filling/emptying system consumption: < 1,200 l Maximum argon consumption (during filling): 400 l/min Ongoing argon consumption (after initial filling): < 0.8 l/min Working pressure in chamber: 10 mbar to 20 mbar Argon gas supply connection: 3/8 in BSP male connector Argon quality: 20 ppm permissible impurity or better (99.998% purity) Power supply (4): 380 V to 480 V AC, 63 A, 50 Hz to 60 Hz, 3-phase Data connections (5): Standard RJ45 network connection. Renishaw recommends using Cat 6 power cables. Ideal operating temperature (7): 18°C to 22°C (min./max.: 15°C to 28°C) Ideal relative humidity (7): < 60% (max. < 80%) Clearance under machine (excluding base): 146mm Optical module protection class: IP5X Noise level: ≤ 70dB Compatible software: QuantAM, InfiniAM Camera, InfiniAM Spectral, Renishaw Central and selected third-party software (1) Build volume refers to the maximum build volume from wall to wall, however the usable area is usually smaller. The substrate plate is not included in the dimensions. (2) Maximum build rate does not include coating time and is dependent on parameters, part geometry and material. (3) Typical process speed depends on parameters, part geometry and material. (4) The calculated maximum load of the machine is 50 A, the nominal operating current is 32 A. (5) The user has the option to configure the network with their own control software. For more information see the RenAM 500 Series Additive Manufacturing System User Manual, Renishaw Part No. H-5800-3693. (6) Due to different electrical requirements in each country, the part numbers for the accessories may vary. Contact your country's customer service department if you have any questions about this. (7) Temperature and humidity must not be at the maximum specified at the same time and must remain below the value at which the dew point reaches 16 °C (61 °F) to avoid the formation of condensation on the laser components. See Site Preparation and Installation Guide for the RenAM 500 Series Additive Manufacturing System, Renishaw Part No. H-5800-3692.

Condition: ready for operation (used), Mitsubishi A6GPPE Programming Controller AV 220 V 50 HZ used 100% functional Dceln Umsi Eb Ics Swsg

Condition: ready for operation (used), Mitsubishi K0J1E-E56DR Melsec-K controller , serial no. according to photo ,used, normal traces of use, 100% functional, scope of delivery according to photos Dcsln Umji Eb Ndj Swsg

Condition: ready for operation (used), Mitsubishi SE-EV-FV AC Spindle Motor , Serial No. according to photo , Hole spacing of mounting holes: 152 x 152 mm, Ø drive shaft: 32 mm ,used, without cooling fan, normal signs of use, 100% functional ATTENTION: Please inquire charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Doln Umsi D I S Ts Swecg

Condition: ready for operation (used), Mitsubishi K7PRFE Printer Interface Unit, serial no. according to photo, with connection cable, in leatherette bag, used, normal traces of use, 100% functional, scope of delivery according to photos Doln Umji Eb Nhj Swocg

Condition: new, Mitsubishi Melsec KOJ1E-DR-AC220 Sequence Controller, serial no. according to photo, unused in original box, 100% functional, scope of delivery according to photos Djln Usi Eb Ntem Swjcg

Condition: ready for operation (used), Mitsubishi / Mazak FX25A BN624A189H01 card, used, normal traces of use, 100% functional Dcjln Uoi Eb H Rjm Sweg

Condition: ready for operation (used), Mitsubishi Diarol DL-SBZ-2-11 Spindle Drive , used, 100% functional Dcjln Uoi Eb Iysm Swsg

Condition: ready for operation (used), Mitsubishi Q2ASCPU-S1 CPU , used, good condition, 100% functional Delnsi Eb Nwo Um Swscg

Condition: ready for operation (used), Mitsubishi Beijer Bigmac-A 00410 control panel . Used, 100% functional Djlnoi Eb Ire Um Swjcg

Condition: ready for operation (used), Mitsubishi K0J1E-DR-AC220 Melsec-K controller , serial no. according to photo ,used, normal traces of use, 100% functional, scope of delivery according to photos Dcoln Uoi Eb Naom Swjg

Condition: ready for operation (used), Mitsubishi TRA 30C Drive Board , used, 100% functional Doln Um Sji Eb N Eswjcg