Used Nilfisk-Alto Floortec R360 B for sale (6,725)

Condition: ready for operation (used), Year of construction: 2018, Packaging speed: 10-150/min, max. film width: 450mm, min./max. cutting length: 100mm/340mm, max. product width/height: 140mm/80mm, control: Fuji Map Check 3, documentation available. On-site inspection is possible. Celrfyst R Tq Uozbsgt

Condition: good (used), Functionality: fully functional, Year of construction: 2011, operating hours: 7,300 h, mileage: 64,000 km, carrying capacity of cage: 600 kg, lifting height: 39,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORM CTE B LIFT 390 HR Year 2011 Working height 39 m Horizontal outreach 26,2 m Basket capacity 600 kg Hours 7300 km 64000 All working and revised Cjlrfysv Aydvszbegt

Condition: like new (used), mileage: 400,000 km, Year of construction: 2020, MERCEDES SPRINTER 519 DRIVING LICENCE B ENGINE 3.0 V6 DIESEL 190 HP YEAR 2020 CELL MT 4X2.10XH1.95 INTERNAL ZANOTTI ROAD FRIDGE UNIT NETWORK CABLE 380 W ATP IN FRC FIRST EXPIRY 01/2026 AUTOMATIC TRANSMISSION AUTOMATIC CLIMATE KM 400000 FINANCING POSSIBILITY Cslev Dhguerfyzbsgt

Condition: used, Telecentric lighting, LED lighting -Manufacturer: Vision Control, Telecentric Lighting -Type: TZB60-B -Light field diameter: 60 mm -Dimensions: 140/70/H115 mm -Weight: 0.8 kg Celoututiorfyzbegt

Condition: used, machine/vehicle number: B33652, spindle passage:60 mm turning length:45 mm boring depth::56 mm turning speeds::70 mm total power requirement:5,5 kW dimensions of the machine ca.:2100 x 1000 x 1800 mm weight of the machine ca.:2,4 t Cgjlrstzf Slefyzbjt

Condition: used, Year of construction: 2011, fuel type: diesel, General information Field of application: Construction Serial number: 26260117 Weights Empty weight: 3.400 kg Functional Lifting capacity: 200 kg Working height: 2.600 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Max. horizontal reach: 1350 m Transport dimensions (LxWxH): 6.68x2.1x2.95 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information Cgslrfyzotr Ny Dobjt

Year of construction: 2004, Condition: ready for operation (used), Number of spindles: 7, min. glass dimensions X/Y: 40mm/40mm, min. glass height: 35mm, glass thickness range: 3mm-20mm, bevel angle: 3°-45°, max. bevel size: 50mm, working speed: 0.5m-4.1m/min. The machine is missing maintenance, the rear chain is defective and various minor repairs are required. An on-site inspection is possible. Cslrsud Suwjfyzbogt

Condition: ready for operation (used), Indramat MAC112B-1-PD-2-C/130-B-0/S005 Permanent magnet motor SN:MAC112-82766 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Cgjlrfyzevabhdsbot

Condition: used, Manufacturer: Kleemann Type: B800H Cone diameter: 800mm Electrical Motor: Included Colrfyzeh Nnh Rjbsgt

Condition: good (used), Control card, MC3 control, plug-in cards, circuit boards, valve module, valve amplifier, circuit board, valve amplifier, valve control Cgelrfyeqku Nuezbst -Manufacturer: Bachmann, valve control from Battenfeld injection molding machine -Type: PVV100 B 2537/00 -Quantity: 2x control card available -Price per piece -Dimensions: 130/50/H30 mm -Weight: 0.3 kg/pc.

Condition: used, Year of construction: 2023, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen Colet U Sc Djrfyzbegt column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 2,6 x 0,6 x 1,2 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, Boring power 60,0 mm bore capacity in cast iron 70,0 mm bore stroke 260 mm table surface area 600 x 600 mm thread dia. bis M 42 M throat 420 mm turning speeds 64 - 1210 U/min morse taper MK 5 feed 0,1-0,2-0,3-0,4-0,5-0,6 U/min column diameter 220 mm T - slots - width 30 mm engine output 5,5 kW weight 820 kg range L-W-H 650 x 1600 x 2640 mm Cgslrfyeixmk Eozbot Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Condition: ready for operation (used), Two complete bending lines for the production of flange rings are available. The lines use the same preheating furnace holes, furnace dimensions X/Y/Z: 1500mm/400mm/14000mm. Line 1: Workpiece dimensions X/Y: 310mm/250mm, max. cross-section (S355 NL): 25000mm², max. flat steel length: 14000mm, max. outer ring diameter: 4900mm, max. inner ring diameter: 800mm, max. ring weight: 3.1t. Conveyor system holes, length: 14000mm. Ring bending machine Irle B 200 HH, max. outer ring diameter: 4900mm, cross section (S355 NL): 25000mm². Flash butt welding system Siemens WS 634, connected load: 1150kVA. Line 2: Workpiece dimensions X/Y: 325mm/250mm, max. cross-section (S355 NL): 12500mm², max. flat steel length: 8000mm, max. outer ring diameter: 2400mm, max. inner ring diameter: 400mm, max. ring weight: 1.5t. Conveyor system holes, length: 8000mm. Ring bending machine Irle B 180 HH, max. outer ring diameter: 2450mm, cross section (S355 NL): 25000mm². Flash butt welding system Siemens WS 634, connected load: 600kVA. Documentation available. On-site inspection is possible. Sale of individual systems with or without preheating furnace possible. Cgjlrovr Edgefyzbjt

Year of construction: 1985, Condition: good (used), Offer 21135 Technical data: - Roller diameter 420 mm - throat 410 mm - max. passage height 265 mm - table size 600 x 600 mm - table left + right tiltable 15 / 30 ° each - table height from floor 1020 mm - saw blade length 3150 - 3260 mm Celrfysg Aid Sjzbjgt - saw blade width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - drive 400 V / 1,1 / 1,7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm - E. foot switch

Year of construction: 2012, Condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Celrfyoilh Efezbjgt Included: – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock!

Condition: used, internal grinding machine, internal grinding device, internal grinding spindle, drum grinding machine -Manufacturer: Paul Eugen Mayer, internal grinding machine type PMB -Drive motor: Hanning 1.1 kW / 2810 rpm -Grinding drum: Ø 100 x 140 mm / see photos -Support table: swiveling Cgjlsmghatjrfyzbst -Dimensions total: 580/500/H1180 mm -Weight: 99 kg

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 2,7 x 0,7 x 1,2 m Equipment: Cgslot U Scworfyzbot - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark * Inkl. IR/RS - (AUTOMATIC TURNING INVERSION FOR MANUAL TAPPING)

Condition: new, Boring power 50,0 mm bore capacity in cast iron 60,0 mm bore stroke 230 mm thread dia. bis M 36 M table surface area 550 x 550 mm throat 400 mm turning speeds 54 - 1032 U/min morse taper MK 4 feed 0,1-0,2-0,3-0,4-0,5-0,6 U/min T - slots - width 30 mm Colrfjixmkzjyzbegt column diameter 200 mm engine output 4,0 kW weight 720 kg range L-W-H 600 x 1600 x 2450 mm Furnishing: - autom. Spindle feed by electromagnetic clutch - Switch for right / left rotation - Hardened and ground steel gears - Hand wheel for manual fine feed - Gear lubrication by autom. Oil pump - Coolant device in the machine base - machine light - rotating work table - Push button for EMERGENCY STOP - Height-adjustable chip protection hood with microswitch - CE marking

Year of construction: 1992, Condition: ready for operation (used), Working range X/Y: 3000mm/1500mm, laser power: 2000W (2kW), laser type: TC L 3003, positioning accuracy: +/-25mm, min. workpiece dimensions X/Y: 1000mm/1000mm, max. workpiece weight: 530kg. Documentation available. On-site inspection is possible. Cgjljvxvfnerfyzbst

Condition: good (used), Year of construction: 1990, machine/vehicle number: 12000861, Offer 23388 Technical data: - Hydr. lifting of the saw bow + hydr. feed regulation - Saw blade dimensions 400 x 24 x 1.5 mm - Cutting range at 90° round approx. 200 mm - flat approx. 200 x 170 mm - Cutting range at 45° round approx. 100 mm - flat approx. 100 x 120 mm - Cutting speed approx. 22 m/min - Mitre-adjustable vice with opening width up to 220 mm - Drive 400 V / 0.25 kW - Space requirement machine W 450 x H 600 x D 900 mm - Mobile table base frame - Space requirement approx. W 580 x H 900 x D 1000 mm Cgelrerpmg Asfyzbot - Weight approx. 120 kg

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, directional control valve -Magnetic valve Cgolrfyob A H Hpjzbst -Type: MEH-5/2-1/8-B -Series: V402 -PN: 2.5-8 bar -Number: 5x valves available -Price: per piece -Weight: 0.3 kg

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch Celrfyskahu Ujzbegt - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. Cslrju Sbbfsfyzbsgt - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Condition: ready for operation (used), Year of construction: 2019, Z-axis: servo-electric, movable transverse to the machine its longitudinal axis, stroke: 1000mm, max. speed: 2m/s, max. handling weight: 5kg (sum of gripper, parts and G-axis), repeat accuracy: +/- 0.1mm. C-axis: pneumatic rotary axis: rotation range: 0°/90°. B-axis: pneumatic, swivel 90° to reduce the stroke of the Z-axis. Stroke extension of the Z-axis: to 1000 mm (for the version with B-axis). G-axis (gripper): Pneumatic drive, stroke length: 50 mm, end positions manually adjustable. Documentation available. Celetlucnerfyzbjgt

Year of construction: 2011, Condition: ready for operation (used), Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm. Cslrsitvpysfyzbogt