Used Nilfisk-Alto Neptune 2-41 for sale (49,127)

Condition: good (used), thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine on mobile base frame -Type: 535-2B Fjboq Ei Dms Exd D Sepg -Cutting head: 1/8 to 2" -Motor: 380 V / 1.35/1.7 kW -Accessories: including extensive accessories see photos -Transport dimensions: 1120/1120/H1290 mm -Weight: 201 kg

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 101.5, Symatec corner polishing machine type Trimer 2. Feb Eowb Eqksxd D Sepg • equipped / programmed for VEKA profiles 82 Softline

Condition: used, Year of construction: 1994, grinding wheel diameter 500 mm max. width of grinding wheel 220 mm Control Siemens Sinumerik total power requirement 35 kW In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Fob Ejv Ehgkoxd D Sopg Changes and errors in the technical data and information as well Subject to prior sale!

Condition: new, Year of construction: 2022, load capacity: 11 kg, arm reach: 1,101 mm, Model: KR10-R1100-2 Quantity: 3 pieces Year of construction: 2022 Axles: 6 Maximum reach: 1101 mm Maximum load: 11 kg Control system: KRC4 Teach Pendant No operating hours Fpob Exd Detuc Ets Seg Comes from a factory for the production of electric cars - never in operation

Condition: excellent (used), Objet Stratasys Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and allow you to combine two or three base resins in a single print run, allowing you to create prototypes from three materials, as well as simulate overmolding or populate build plates with selected models. Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model Materials: Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Fpobjv Rw Ete Exd D Sjg Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber compounds with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Equipment and devices Architectural models Medical models Injection molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for components smaller than 50 mm; up to 200 µm for the full model size (only for solid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC connection: 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: repair required (used), Year of construction: 2003, Functionality: unexamined, machine/vehicle number: J10M0065, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 19,700 mm, total length: 20,700 mm, total width: 20,500 mm, workpiece height (max.): 800 mm, workpiece width (max.): 600 mm, workpiece length (max.): 215 mm, type of input current: AC, table width: 590 mm, overall weight: 2,000 kg, table height: 510 mm, Machine was turned off before 1 year as functional, it was rarely used and the batteries on the servos ran out because of it so machine is not possible run, therefore I offer it as non-functional. MODEL: W21FAV-2 * Mitsubishi 64 Bit PC Based CNC Control * Submerged Machining Capability * Automatic Wire Threader (AT) * Wire Chopper * Automatic Fluid Level Control * Auto-Lock Vertical Tank Door Mechanism * Full 4-Sided Work Table * Color CRTWith 3D Graphics Feb Exdsr Igzks D Sepg * Power Master Control (Automatically Adjusts Power Settings) * Standard Hand Pendant Control * Fine-Grain Dianite Casting Material * Moving Column Design * Auto Lube System * Filtration System * Electric Chiller System: * Direct Drive 25mm Ball Screws * Linear Motion Guide Ways * AC Servo Drives * Fine Resolution Encoder Feedback * All Available Manuals and Accessories

Condition: good (used), axle configuration: 3 axles, first registration: 07/2019, suspension: air, color: black, Year of construction: 2019, Axle configuration Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 5.230 kg Carrying capacity: 35.770 kg GVW: 41.000 kg Functional Fpsb Exdjv Rafcs D Ssg Extendable superstructure: Yes Condition Technical condition: good Visual appearance: good Additional information Please contact Pedro or Arie for more information

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Feb Ejwcz Axsxd D Sspg

Year of construction: 2010, Condition: used, nominal voltage 400 V/HZ/Ph rated capacity 11 KW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Fob Eov N Rbfexd D Sepg Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Functionality: fully functional, Heating medium: Transformer oil Motor and pump: 1.5 kW Heater: 7.6 kW Fsb Exjv S Srwed D Sopg Two units available Price: €600 each

Condition: new, Year of construction: 2024, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Fpeb Exdstql S Ts D Sog Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: used, mileage: 477,598 km, power: 294 kW (399.73 HP), first registration: 07/2014, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 08/2025, brakes: retarder, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,200 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Outside temperature display, differential lock, air brakes, disc brakes, sun visor, roof hatch, air seat, tachograph, underride protection, dual tires, used vehicle Vehicle no. 3120, ESP, differential lock rear, TGS cab with roof hatch + sun visor, ZF automatic transmission, intarder/retarder, MFL, air suspension front + rear, automatic climate control, auxiliary heating, cool box, tires front: 385/65 R 22.5, rear: 315/80 R 22.5, EURO 5, Hage + Knapp tank body, ADR, diesel + heating oil, 2 chambers (7,430 + 7,290 L), total volume: 14,720 L, top + bottom filling, receipt printer, 2 x hose reels (HD32 --> 50 meters / HD40 --> 30 meters), 200 L AdBlue tank with dispensing pump, empty weight: 8,270 kg, : 18,000 / 20,200 kg, 1st hand, errors and prior sale excepted Fsb Exdowdc A As D Sopg

Condition: good (used), Contact via WhatsApp or gbagger from renowned German manufacturer RSP in very good condition, ready for immediate use, few operating hours and very well maintained. Febevkpl Es Exd D Sepg

Condition: used, mileage: 624,000 km, power: 243 kW (330.39 HP), first registration: 11/2013, fuel type: diesel, number of seats: 45, gearing type: automatic, next inspection (TÜV): 09/2025, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Iveco Crossway LE - 45 seats - Automatic transmission - Matrix system - Air conditioning - 2 vehicles available * Diesel - 7,790 cc - 243 kW - 330 hp - Euro 5 EEV - Green sticker - TÜV (German Technical Inspection Association) * 45 passenger seats + 1 driver - 38 standing places - 1 wheelchair space - 2 vehicles available * Auxiliary heating / radio / ABS / ASR / retarder - Double-width rear door - single-width front door - * Vehicle dimensions: Length: 11,995 mm x Width: 2,550 mm x Height: 3,145 mm Fob Exdewcipgo D Sepg * Vehicle 1: VNESFR1610M018288 - Mileage: approx. 623,000 km * Vehicle 2: VNESFR1620M018311 - Mileage: approx. 624,000 km * German vehicles - German vehicle registration documents - Vehicles immediately available & ready for use * The vehicle price is per vehicle - Errors / misprints & prior sale reserved * Please make an appointment for a viewing & test drive * Contact: Andreas Vogel * ATTENTION - Vehicles are stored outside - Please inquire about the exact location - ATTENTION -

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 650 mm z-travel 550 mm Control Sinumerik 840 D sl Number of boring spindles 2 St. spindle tunring speed 10.000 U/min spindle distance 700 mm number of tool places 2 x 35 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fobovw Dzzo Exd D Sepg Technical features & accessories: - Chip conveyor, Knoll Type 1000 K-1/700 Year 2022 - Cooling system Knoll Type FKA 1200 Year 2022 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements Fpob Esv Rmp Ioxd D Seg -Manufacturer: Air Loc, leveling elements 2 pieces for machine tools and systems -Type: GLV 110 -Height: 25 mm -Shipping/Price: complete -Dimensions each: 125/125/H25 mm -Weight 1.2 kg/piece

Condition: ready for operation (used), General Manufacturer INOX - MAURER AG Location Outdoor storage (57234 Wilnsdorf) Condition used Tank volume 25,000 liters Max. permissible operating temperature 50 °C Specific weight of the medium 1.2 (to/m³) Bottoms Dished bottom Design upright Standing shape Feet Number of feet 3 pieces Fpjb Exjv Rzl Djd D Sjg Insulation Insulation available Insulating jacket riveted Technical data / dimensions Internal diameter 2,600 mm Total height 5,900 mm Wall thickness of base 6.9 mm Wall thickness of cylinder 6 mm Equipment Technical documents Drawing, various documents Manhole / dome in cylinder, in top shelf Type plate

Condition: used, mileage: 310,113 km, power: 175 kW (237.93 HP), first registration: 03/2016, overall weight: 13,500 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 01/2026, gearing type: automatic, emission class: euro6, loading space width: 2,332 mm, loading space length: 6,330 mm, loading space height: 2,093 mm, total width: 2,600 mm, total height: 3,530 mm, Equipment: ABS, air conditioning, soot filter, tail-lift, Engine brake, disc brake, sun visor, roof hatch, electric exterior mirrors, twin tires, used vehicle Fob Exewdc Dgsd D Sspg Vehicle number 3118, electronic braking system with ABS and ASR, disc brakes, wheelbase 4760 mm, ClassicSpace S cab, driver's comfort suspension seat, electric front axle, rear view camera, air conditioning, roof hatch, sun visor, Mercedes PowerShift 3 automatic transmission, high-performance engine brake, immobilizer with transponder, 180L diesel tank, 25L AdBlue, Electronic Stability Control (ESP), Lane Keeping Assist, Active Brake Assist, cruise control, EURO6, Frigoblock FB-FIL2, year of manufacture: 2014, freezer unit, 2-zone cooling, portal doors, side door, LBW, 1st owner, please contact us for inquiries, errors and prior sale excepted.

Condition: used, Year of construction: 2009, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. Number of working hours ca. 91.457 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Fpjb Exjvw Dzhod D Sjg - NC swivel table - Chip conveyor, Knoll 600 K-1 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Fixators, leveling units, leveling elements, machine base, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot, spring elements -Leveling elements: 2 pieces, for machine tools and systems -Spring element: Ø 160 mm Fpebev Rmkfo Exd D Seg -Mounting hole: M16 -Price/Delivery: complete -Dimensions: Ø 160 x 38 mm -Weight: 2.3 kg/piece

Condition: ready for operation (used), General Manufacturer INOX - MAURER AG Location Outdoor storage (57234 Wilnsdorf) Condition used Fsb Eov Rymyjxd D Sepg Tank volume 25,000 liters Max. admissible operating temperature 50 °C Design upright Standing shape Feet Number of feet 3 pieces Technical data / dimensions Internal diameter 2,600 mm Total height 5,900 mm Wall thickness of base 6.9 mm Wall thickness of cylinder 6 mm Equipment Technical documents Drawing, various documents Manhole / dome in cylinder, in top plate Type plate Equipment Crane eyes Outlet available Remarks Manhole cover plated Remarks Test pressure + 4 bar

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Fpeb Exsvw D Axjd D Seg Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor - Cooling system, Knoll Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 D Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - NC swivel table - Chip conveyor - Cooling system, Knoll, KTS 25-60-T Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Fpebevw D A Es Exd D Sog

Condition: used, Year of construction: 2009, x-travel 600 mm y-travel 550 mm z-travel 360 mm Control Sinumerik 840 C Number of boring spindles 2 St. spindle tunring speed 5.000 U/min spindle distance 600 mm number of tool places 2 x 40 Pos. Number of working hours ca. 92.818 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fsb Exevw Dz Ijd D Sjpg Technical features & accessories: - NC swivel table - Chip conveyor, Knoll 600 K-1 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, x-travel 650 mm y-travel 650 mm z-travel 550 mm Control Sinumerik 840 D sl Number of boring spindles 2 St. spindle tunring speed 10.000 U/min spindle distance 700 mm number of tool places 2 x 35 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor, Knoll Type 1000 K-1/700 Year 2022 Fpeb Exdevw D Alj D Ssg - Cooling system Knoll Type FKA 1200 Year 2022 Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!