Used Nilfisk-Alto Neptune 2-33X for sale (42,223)

Year of construction: 1985, Condition: ready for operation (used), Double-sided tenoning machine for parquet FOD DOUBLE-SIDED for parquet production, it has a face leveling saw and a vertical cutter for the production of a groove Cjbu Ssilc Ncjb Arsgt

Year of construction: 1984, Condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Cjbuohvml Is Sb Arjgt Wheel Tread Diameter Maximum 1120 mm Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm Cjbueihpg Ee Sb Aregt TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 21321, Automatic longitudinal parquet molding machine, a complete automatic machine for performing all longitudinal operations in the production of solid parquet (solid wood). Cgjbu Sbst D U Tks Aret Operating voltage: 380V Power: 88kW Production date: 2016 Main technical features of the machine: - min/max length of processed parts: 200-1300mm - min/max width of processed elements: 40-180 мм - min/max thickness of processed parts: 8-85mm - infinitely adjustable feeding speed: 13-45 m/min. - has 6 heads: two lower horizontal spindles (1-2), two vertical spindles (3-left, 4-right) and two upper horizontal spindles (5-6)

Condition: used, XP600 Numerical Control with BIESSE WORKS Software Working dimensions in X axis 3865 mm Working dimensions in Y axis 1975 mm Working dimensions in Z axis 350 mm Nesting worktable Barcode lable printing Automatic unloading system by table with motorized belt Csbepwvtcsu Sb Arogt N ° 1 vertical electrospindle, with automatic tool change, liquid cooling system Automatic tool changer system with 21 positions with chain on the rear of the machine Boring head with 19 vertical and horizontal spindles arranged as follows: - N ° 6 vertical in X axis - N ° 7 vertical in Y axis - N ° 4 horizontal in X axis - N ° 2 horizontal in Y axis N ° 1 integrated 120 mm blade in X axis for the execution of grooves Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning the machine control Vacuum pump Machine weight 5100 kg Installed power KW 32.7

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, total length: 9,920 mm, total width: 4,900 mm, total height: 4,800 mm, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT NOVA (the newest type of belt) Link height: 80mm / max. product height: 65mm / Net belt width: 760mm / Belt width between infeed covers; 700mm / belt stack with 24 tiers / Belt mesh: M6-1.5 / 24 tiers (possible to put more tiers) Cebu Sb Asulr Rijrsgt Layout N-S CR Evaporators SS/AL (Sequential Defrost) / number of coils: 3 / number of fans: 3 Standard CIP cleaning system Automatic Air Balance Control Evaporator design pressure: 50 bar Enclosure: S/W (Stainless steel inside and white outside) / thickness: 150mm Refrigerant: CO2 / refrigeration feed: pump (can work on ammonia) PLC type in control panel: Siemens S7 Variable frequency drive: Danfoss VPN remote access ProCare service reports available - last July 2023 Full documentation available Dismantling under the supervision of JBT Valve island available (not included in the price)

Condition: new, Year of construction: 2024, Functionality: fully functional, usable height: 500 mm, outer dimension width: 835 mm, outer dimension length: 1,240 mm, payload: 1,000 kg, Hello, I sell mesh and metal containers 1/2 new - dimensions 1240 x 835 x 500 mm - weight of the container about 55 kg - payload 1000 kg - new containers Cebu Sbjupudmj Arjgt - net price 99.00 pln/unit. - sale only against VAT invoice

Condition: new, 300 running meters of 2 1/2" in stock and 2" we also have approx. 150 running meters for € 12,- running meters. We also have matching Plasson couplings for € 95,-- or € 75,--piece. Csbu Sbemyafms Arjgt

Year of construction: 1995, Condition: like new (used), Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm Cgebu Sokth N Nob Arst rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Condition: good (used), Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 02/2009, - thickness of glass - from 3 to 12 mm, - maximum glass format 6100x3300 mm, - working height 950 mm +/- 30mm. ( adapted to the line), - overall dimensions (length x width x height) 8500x4300x1700 mm, - feed speed on belts up to 40 m/min, - glass feed speed on the cushion up to 40 m/min, - power supply voltage - 400V, 50Hz, - total installed power - 10 kW, - compressed air supply with a pressure of 7 bar, - maximum air consumption of 1100 NL/min, - glass presence sensor - OK. - automatic positioning of the glass sheet - OK. - RAL color - according to the order, - outer edges of the table made of hard wood, - table top covered with black felt with a thickness of 4mm, - guide and drive system protected against dirt, - guides and gear rails surface hardened, - on the bridge was mounted glass transport suckers, - on the bridge mounted stop buffers for manual cutting of glass. - the table has a solid frame construction, - the table is equipped with a system of sensors (electronic and mechanical), - top of the attachment covered with black felt with a thickness of 4mm, - oil during cutting dispensed automatically to both wheels simultaneously. - double-sided cutting, - breaking of the upper cut - breaking roller, - breaking of the bottom cut - breaking bar, - sheet separation - cutting knife, - adjustable parameters heating time; separation time, cutting delay - they depend on the thickness of the cut VSG. - heating of the cutting place - a set of radiators - max thickness of VSG glass - not exceeding 12mm in total, - max width of cutting 4000mm, - working height adapted to the height of the table, - overall dimensions of the table (length x width) 1500 x 47000 mm, - glass transport speed - adapted to the table - total installed power ~ 17kW - supply voltage - 400V, 50Hz - compressed air supply with a pressure of 7 bar, - manual and automatic cutting function, IV. basic technical data of glass breaking station type.GS6-3/2 Cgebu Sbsvdaf Ae Arjt - the table has a solid frame construction, - the table has an air cushion to facilitate the movement of glass, - control of breakers and fan is done by pedals, - glass thickness from 3 to 12 mm, - max glass size 3300 x 6100 mm, - working height adapted to the height of the table, - overall dimensions of the table (length x width) 3600 x 6000 mm,

Condition: refurbished (used), Full renovation: All bearings new, pneumatic new, all shafts new, chains new, all rollers new, electrical components new. Cgsbouggaaou Sb Arst

Condition: used, Calibrating machine brand Sandingmaster model CSB/2/900, roller + pad, with 900 belt, roller motor of approximately 11 Kw, pad motor of approximately 7.5 Kw. Used. Cjbu Sbeiv Daue Arogt Sandingmaster brand calibrator model CSB/2/900, roller + pad, with 900 carpet, roller motor of about 11 Kw buffer motor about 7.5 Kw. Used.

Condition: new, Year of construction: 2024, Construction As a standard, the exhaust filter frame is made of steel - AISI 304 (it is possible to make a special version of steel, e.g. AISI 316) Principle of operation The scrubber is equipped with two filtration towers - a pre-treatment column and a proper treatment column. The first column has one filtration level, the second column additional four levels of exhaust gas filtration. Each filtration level is equipped with spray nozzles, allowing for self-cleaning of the filter cartridges. Oils and impurities condensed from the exhaust gases enter the water tank located at the bottom of the machine. Then, impurities are filtered out of the bath using a lamellar oil separator. Installation Purchaser should ensure access to the machine of media such as: cold/hot water, compressed air and ensure the possibility of replacing the water bath after the cleaning process. The columns are disassembled to facilitate transport and installation. Cjbueitc Hhs Sb Arsgt

Condition: not inspected (used), Functionality: unexamined, machine/vehicle number: 3784031, Electric motor AC DEMAG Type: KBF 80 A 8/2, Serial No: 3784031, 0.13/0.50 kW S4-40 %ED, 630/2710 rpm., Y380 V-50 Hz, 1.2/1.5 A DEMAG AC electric motor Type: KBA 71 A8, Ser.No. 4407067, 0.1 kW 100 %ED, 670 rpm, D/Y 220/380 V - 1.35/0.79 A Cgsbeu Dk Acju Sb Arjt

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Chipper Shredder Teknamotor Skorpion 500 EB/2 - manufactured in Poland - year of production 2008 - DTR, CE - output up to 14 mq/4 TECHNICAL PARAMETERS: Cgjbu Sbstp Taye Arst inlet width 500 mm inlet height 130 mm shaft diameter 400 mm shaft width 515 mm main motor 45 kW number of knives 2 pcs. length of knife 515 mm bottom gear drive shaft bottom shaft motor 1,5 kW top gear pulling shaft top shaft motor 1,5 kW length of infeed belt receiving belt length 3000 mm 3800 mm belt width 500 mm belt feed forward / backward transport dimensions (length / width / height) 500 / 240 / 220 cm weight about 2500 kg

Condition: used, Year of construction: 2009, Blow moulding machine PET tenz Cjbuoupi Iae Sb Arsgt

Condition: new, Year of construction: 2024, Our new generation Double Shaft Multi Slitting Machine CML/2/250 has entered the service of our sector... Self-adjusting feed speed according to the cutting height... Cgebu Settlameb Aret Ability to install saws of different diameters thanks to the up-and-down movable saw shaft Automatic positioning according to cutting height Adjustable cutting height from 20 mm to 250 mm ----- Our new generation Double Spindle Multiripsaw Machine CML/2/250 has entered the service of our industry... Self-adjusting feed rate according to cutting height... Ability to mount saws of different diameters thanks to the up-down movable saw spindle Automatic positioning possibility according to cutting height Adjustable cutting height from 20 mm to 250 mm

Condition: used, Comec FR/2 Automatic programmable milling machine for legs of children's beds or similar elements, overhauled Cgobjr R H D Hsu Sb Arot

Condition: new, Manufacturer: Demag Cranes Type: Chain Hoist 380-415V 50Hz Model: DMC-PRO-1-125 1/1 H2.8 V8/2 Cgebu Ssuywdrjb Arst Load Capacity: 250Kg Hook Path [m]: 2.8 m Group Of mechanisms FEM: 4m / M7 Condition: NEW OUT OF BOX

Year of construction: 2008, Condition: excellent (used), Double-head band saw LIGNUMA MM-700/2 PION – Polish production TECHNICAL PARAMETERS: min. diameter of the processed log 150 mm max. diameter of the processed log 600 mm min. length of processed log 1200 mm max. length of processed log 3000 mm input table length 3500 mm main engine 2 x 11 kW feed motor 0.75 kW cutting system adjustment motor 2 x 0.37 kW smooth feed adjustment band saw length 4010 mm band saw width 32 - 50 mm band saw thickness 0.9 - 1.25 mm module 22.2 mm cutting thickness programmer Csbu Sbsi Ezwmo Arjgt hydraulic tensioner of the band saw dimensions (length/width/height) 6000 / 2600 / 2100 mm weight 1700 kg

Condition: used, Year of construction: 2000, machine/vehicle number: 921115, Ideal machine for the production of rolling pins, turned round chair legs and similar. Cjbuermxr Ao Sb Arjgt

Condition: new, Manufacturer: Demag Cranes Type: Chain Hoist 380-415V 50Hz Model: DC-ComA 1 125 1/1 H4 V8/2 Load Capacity: 250Kg Hook Path [m]: 4m Cebu Sb Aouywdlsrsgt Group Of mechanisms FEM: 3m / M6 Condition: NEW OUT OF BOX

Condition: ready for operation (used), Year of construction: 1969, Functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke distance: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Cgobuowcn H Rj Sb Aret Stroke: 150 mm

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 797256+797257+797255+797259, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Four robots will be auctioned together (built in 2013; operating hours 8,680/9,424/9,626/10,458 h; serial numbers 797256/797257/797255/797259) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Cgsbu Sbewc Ucfe Arot Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: ready for operation (used), Year of construction: 2014, operating hours: 543 h, Functionality: fully functional, machine/vehicle number: 797298, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, One robot will be auctioned (built in 2014; operating time 543 hours; serial number 797298) Kuka robots now available at attractive package prices. Please also check out the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Four-pack with robots built in 2013 and an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s Csbu Sb Aowc Uaqorsgt MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included