Used Nilfisk-Alto Floortec R360 B Obc for sale (6,852)

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Workpiece length: 350 mm Bar capacity: 76 mm Fgjbjwc Sico Em T Rpob Turret Tool stations per turret: 12 Spindle Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: ready for operation (used), Year of construction: 2013, operating hours: 10,088 h, Functionality: fully functional, working width: 900 mm, workpiece height (max.): 100 mm, grinding belt length: 1,900 mm, grinding belt width: 930 mm, Deburring machine with 3 units and wet separator TECHNICAL DETAILS Working width: 900 mm Workpiece height: 100 mm Fgeb Emjwf Iqhj T Rpob Grinding belt and feed Grinding belt dimensions: 930 × 1,900 mm Feed speed: 2.5 – 14 m/min Unit speeds 1st unit, 2-speeds: 11 and 22 m/s 2nd unit, 2-speeds: 11 and 22 m/s 3rd unit: 18 m/s MACHINE DETAILS Dimensions (L × W × H): 2,300 × 1,500 × 2,300 mm Machine weight: 3,000 kg Operating hours: 10,088 h EQUIPMENT - W sanding belt unit - B brush unit for finishing sanding and light edge rounding - Roller unit (W) - Integrated extraction system W 2000 series wet scrubber with 3.0 kW power available; year of manufacture: 2021 Special sludge container available ATEX Zone 2

Condition: good (used), Year of construction: 2004, operating hours: 5,012 h, Functionality: limited functionality, machine/vehicle number: 15115221654, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 100, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 90 °, swivel angle C-axis (max.): 360 °, Note: Minor relay error. TECHNICAL DETAILS X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Rapid traverse X-axis rapid traverse: 100 m/min Y-axis rapid traverse: 50 m/min Z-axis rapid traverse: 50 m/min Feed rate X-axis feed rate: 20 m/min Y-axis feed rate: 20 m/min Z-axis feed rate: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load: 2,200 kg Fgsb Em T Rjwd N D Tepeb Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Number of magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swivel spindle (B-axis): +90° to -90° Tilt-action of swivel spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control system Control system manufacturer: SIEMENS Control system model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h On-time: 17,969 h Connected load: 60 kVA Total length: 6,800 mm Total width: 3,900 mm Total height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor - Continuously adjustable speed - Technical documentation and manual - Hydraulically clamped rotary axis - Tilting spindle with 2.5° indexing

Condition: used, Year of construction: 2016, swing diameter 560 mm turning length 1.400 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° spindle head 6 DIN 55026/55021 ISO 702/1 bar capacity 65 mm spindle diameter in front bearing 110 mm turning speed range - spindle ~ 5.000 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C - Axis 0,001 ° Number of Turrets 3 turret (x-stations) 3 x 12 pos number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 9,4 kW Torque 19 Nm travel -x axis 140 mm travel -z axis 1.375 mm rapid traverse X-axis 22,5 m/min rapid traverse Z-axis 45 m/min feed power X/Z: 9.000 N number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 30 x 55 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -y axis 190 mm Fjb Ejwb Hx Aom T Rpegb travel -z axis 1.400 mm b - axis 360 ° Holding Torque B: 3.000 Nm rapid traverse X/Y/Z: 20 / 10 / 40 m/min rapid traverse B: 360 °/sec feed power X/Z: 9.000 N feed power Y: 16.000 N tool taper 30 x 55 mm DIN 69880 total power requirement 108 kVA weight of the machine ca. 14 t dimensions of the machine ca. 8,0 x 2,6 x 2,5 m CNC Turning- and Milling Center INDEX G 250 - INDEX WHD 200/14 Workpiece Handling System Chuck parts max. 200 mm in diameter Length up to approx. 200 mm Shaft parts max. 80 mm in diameter Length up to approx. 400 mm Workpiece weight max. 2x 10 kg Max. workpiece projection: 150 mm (at 10 kg) Two-jaw double gripper for blanks and finished parts Longitudinal gripper travel Z: max. 5,200 mm Gripping stroke Y: max. 300 mm Electric rotation axis 23 degrees Electric gripper rotation angle horizontal axis 4x 90 degrees Double gripper travel per gripper jaw 20 mm - Schnaithmann Pallet Handling System (Type BS) 20x workpiece carriers 240 x 200 mm

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand FANUC Model 30i-B Main Drive Number of axis 12 Movement X-Axis Movement 50 mm Y-Axis Movement 50 mm Z-Axis Movement 100 mm Turret Number of turrets 1 Additional Equipment Fsb Eev Dni Ajm T Rpogb Chip Conveyor, Hinged Type High Pressure Device: 0.25/5/12 MPa Oil Mist Collector for Oil/Emulsion Chiller System for Machine & High Pressure Device Cooling This 12-axis DMG MORI Multisprint 36 multi-spindle turning machine was manufactured in 2019. Ideal for complex turning operations, it offers precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI Multisprint 36 machine we have for sale. Contact us for more information. Application Types Turning

Condition: good (used), SPİNDLE HOLE DİA 1.3" POWER 7.5 hp RPM 8,500 RPM # AXİS 8 CONTROL CNC (FANUC 32i-B Plus) Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Tool carrier 1: X1/Y1 travel mm | in 70/405 | 2.76/15.94 Counter spindle: X2/Z2 travel mm | in 300/200 | 11.81/7.87 Tool carrier 2: Y2 travel mm | in 135 | 5.31 Rapid traverse speed on linear axes Feborbl N Es Em T Rpogb X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Maximum speed rpm 4,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 5.25/4.5 | 3.9/3.3 Tool holder on slide Y2 On station for back working Fixed/driven tools for back-working 4/4 (5/4)* Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Tool holder on slide 2 Fixed/driven tools for back-working 2/0 (0/2)* (0/1 for polygons)* Maximum speed rpm 4,250 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Machine Footprint m² | ft² 2.8 | 30.1 Machine height mm | in 2.085 | 82.09 Machine weight (including coolant tank) kg | lbs 3,550 | 7,826 Control system DMG MORI SLIMline Control with 10.4″ monitor FANUC 32i Automatic turning with 6 linear axes and 2 C-axis Main spindle with 8,500 rpm, 29.8 ft lb, 7.4 hp Counter spindle with 8,500 rpm, 10.3 ft lb, 3 hp Total of 41 tool stations 8 driven tool stations as standard Driven tools spindles 6,000 rpm, 2.2 ft lb, 1.3 hp Control panel with 10.4" color display and FANUC 32i-B Plus 2 control channels, 6 linear axes and 2 C-axes Tool Monitoring System with graphical tool load display as option Up to 2 tools working simultaneously EQUIPPED WITH: Patriot 338 Edge Bar Feed Sliding Headstock Belt Type Chip Conveyor

Condition: excellent (used), CNC Control 32i-Model B CNC Control Type Fanuc Turning Diameter: 17.72″ Chuck Size: 23.6″ Spindle Speed: Up to 3500 RPM Dimensions: 118 x 75 x 102 inches Weight: 24,251 lbs Max Process Speed: 30 m/min Ball Screw Diameter: X1=1.6″, Z1=1.6″ Number of Tools: 12 Tool Holder: VD140/50 Tool Flight Circle: 24.4″ Spindle Bearing Diameter: 5.9″ Drive Power: 52 kW (100% CDF), 67 kW (40% CDF) Rated Speed: 1,200 RPM Max Speed: 3,500 RPM Tailstock Features: Fgsbewa Tz Us Em T Rpjb Working Stroke: 7.9″ Spindle Bearing: Rigid, without bearing Max Peak Distance: 25.2″ Pressing Force: 850 daN Center Point Adapter: MK4

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm Fgsb Em T Rjrtrvyepjb The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, HANEX 17D SWISS TYPE LATHE MAKE HANEX, MADE IN KOREA MODEL 17 D YEAR 1997 CONTROL FANUC OT-CD MAX MACHINING LENGTH 210.0 mm MAX MACHINING DIA 17.0 mm MAX DRILLING DIA 7.0 mm SPINDLE RANGE 200 – 8,000 rpm SPINDLE MOTOR 1.1/3.7 kW SUB-SPINDLE 200 - 4000 rpm TOOL CAPACITY FOR OD MACHINING 8 TOOLS FOR ID MACHINING 3 TOOLS FOR BACK-END MACHINING 2 TOOLS SLIDE TRAVEL X AXIS: 32.0 mm Z AXIS: 210.0 mm T1, T2=105.0 mm Fgob Em Tjwidy Ts Rpsb B AXIS: 113.0 mm MACHINE DIMS 1500 x 980 x 1500 mm MACHINE WEIGHT 1050 KGS PLUS 3000.0 mm FULL LENGTH MAGAZINE BARFEED RANGE OF TOOL HOLDERS RANGE OF COLLETS SET OF MANUALS

Condition: good (used), Year of construction: 2010, Traverses X Y Z: 1067mm x 610mm x 610mm, Table size 1270mm x 610mm, 610mm C axis Table (360 degrees) +/- 90-degree head (B axis), 18kW Spindle Motor, 40 station side arm ATC, 40 spindle taper, 12,000rpm spindle, Hurco Winmax control, coolant, swarf conveyor Fgeb Em Tsv I D Tle Rpob

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand FANUC Model 31i Model B Main Drive Spindle speed range 450-45000 Spindle bore 25 mm Number of axis 3 Movement X-Axis Movement 260 mm Y-Axis Movement 260 mm Z-Axis Movement 100 mm Tools Slots in storage 20 Max weight 0,5 kg Max tool diameter 10 mm This Matsuura Lumex Avance-25 3D Printer was manufactured in the year 2018 in Japan. It is equipped with a Fanuc 31i Model B control unit and has 3 axis. The machine has a spindle speed of 450-45000 rpm. Fgebswiaidj Em T Rpsb Application Types 3D Printing

Condition: excellent (used), Year of construction: 2022, Doosan DBM 2030 Bridge Mill Double Column and Bridge Type Machining Center Installed 2022 Fgsb Em T Rsv Iq Hfjpjb Control: Fanuc 31i-B, 15" Screen Contact us for specifications

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm Fgob Eev Da Tmom T Rpjb spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts - in checked conditions - machinevideo - ?v=NLsK4PnTr6w Equipment: - robust lead/pull spindle lathe - RÖHM four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - machine swing feet - original operating instructions

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Fjb Em Tsruakgs Rpsgb Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1999, Overview  This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data  Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pick&Place neckhandling system Integrated foaming system Neumo butterfly valves Fsb Em T Rowiizpepogb

Condition: good (used), mileage: 257,184 km, power: 194 kW (263.77 HP), first registration: 04/2020, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 285/70R19,5, fuel: diesel, wheelbase: 5,600 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,480 mm, loading space length: 7,260 mm, loading space height: 2,630 mm, Year of construction: 2020, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Short cabin - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 8795 kg, Own weight: 7205 kg, Gross weight: 16000 kg, Total tank capacity: 340 litres, Suspension type: Air suspension, Cabin type: Short cabin, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: White, Engine manufacturer: Paccar, Engine power: 194 kW (260 Hp), Fuel: Diesel, Euro: 6, Gearbox type: AS-Tronic, Gears: 6, Power steering, ABS, ASR, Seats: 2, Tail lift, Tail lift type: Tailgate, Tail lift load capacity: 1500 kg, Tail lift manufacturer: Palfinger, Tail lift material: Aluminum, Tail lift size: 180 x 252 = More information = Drivetrain Engine brand: PAC Gearbox Gearbox: 6 speeds, automatic Axle configuration Tire size: 285/70R19.5 Brakes: Disc brakes Axle 1: Steered; Tire profile left: 12 mm; Tire profile right: 11 mm; Suspension: Leaf spring Axle 2: Twin tires; Tire profile left inside: 4 mm; Tire profile left outside: 4 mm; Tire profile right inside: 4 mm; Tire profile right outside: 4 mm; Suspension: air suspension Dimensions Dimensions (L x W x H): 971 x 255 x 381 cm Weights Empty weight: 7,205 kg Payload: 8,795 kg GVW: 16,000 kg Functional Tail lift: Palfinger, tailgate, 1,500 kg Height of loading area: 112 cm Interior Number of seats: 2 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 2 Identification License plate: BB-669-B = Company information = Fobevl Eccs Em T Rpogb Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1991, Mazak SQT 10MS lathe for sale. The machine is fully functional and in good condition. Technical specifications: Max. turning diameter 230 mm Main spindle Speed range 35-6,000 rpm Main drive power 11 kW Secondary spindle Drive power 5.5 kW Speed range 180 - 6,000 rpm Indexing 72 positions/5 ° Tool turret Number of tool positions 12 Driven tools Speed range 120-3,000 rpm Drive power 2.2 kW Travel paths X-axis 160 mm Z-axis 455 mm B-axis 460 mm Travel speed Feed range X/Z-axis 0 - 5,000 mm/min C-axis 1 - 2,000 °/min Machine data (with standard equipment) Total connected load 43 kVA Machine weight, . 3,500 kg Machine dimensions (L x W x H), approx. 2.70 x 1.70 x 1.85 m Accessories Fgjb Eov Tbu Dem T Rpob Tool presetter (MAZAK Tool Eye System) C-axis Dual foot switch for opening/closing the chuck Chuck status feedback (open/closed) Front door lock Complete coolant system Work area lighting Documentation

Condition: excellent (used), Year of construction: 2020, Doosan Puma TT2100SYY Mfd. 2020 Tooled as pictured Bar feed: FMB Turbo 565 (12ft) Mfd. 2019 Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes Fgebovniako Em T Rpsb LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM MP SYSTEMS 1000 PSI HIGH PRESSURE COOLANT Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING SPECIFICATIONS: Machining Length     27.38"

Condition: used, Year of construction: 2025, I - beam section - flat steel 80 x 16 (d 1200) mm I-beam section - upend 50 x 15 (d 1000) mm Fob Em Tsu Rfqhe Rpsgb L-beam 50 x 5 (d 1200) mm round material 40.0 (d 800) mm bar material dia. max. 70 x 2.0 (d 1600 ) mm square material 80x30x3 (d 4000) mm channels - flange UNP 80 (d 800 ) mm bending speed 4.4 m/min roll diam. toproll 157 mm bore 50.0 mm oil volume 18.0 Liter total power requirement 1.1 kW weight 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manually adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: good (used), overall weight: 8,500 kg, total length: 3,990 mm, total width: 2,280 mm, total height: 2,500 mm, Year of construction: 2013, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Fgebjrtrx Ro Em T Rpsb Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: used, Year of construction: 2002, Overview  This stretch blow moulding machine was manufactured in 2002 by France-based SIDEL. It is suitable for producing PET bottles in various formats and is immediately available for sale. The machine includes a preform tipper, container, and feed system. Technical data Capacity: 24,000 b/h Formats: 0.25 l, 0.5 l, 1.0 l, 1.5 l PET bottles Neck finish: 28 mm PCO Voltage: 400 V Frequency: 50–60 Hz Scope of Delivery  Sidel SBO 20 Series 2 blow moulder Preform tipper Container system Preform feed system Fgobjwiiy Ee Em T Rpsb

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00456, arm reach: 2,650 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 350 kg, Refurbished FANUC M-900iA/350 manufactured in 2012.02. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/350 Model Number: A05B-1327-B501 Year of Manufacture Robot: 2012.02 Warranty term (months): 12   Payload (kg): 350 Reach (mm): 2650 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1800 Fgjb Em Tjwigbto Rpeb   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.02 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10  

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 300565, Tsugami SS327-5AXIII Mfd. Nov. 2020 Fanuc Series 31i-Model B5 IEMCA Boss 338 HD Run less than one shift Cut Steel Fgeb Em Tovnf Rfj Rpob Standard tooling included

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, (2) 12-station turrets, Chip conveyor, Fgeb Em Tju T Shvj Rpeb Full automation system Hennig system Hours: 4,684 2 Machines Available 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: good (used), Year of construction: 2016, machine/vehicle number: 30339, Wickman 6-57 CNC Multi-Spindle Screw Machine Fgob Em Touzlltj Rpjb SN: 30339 Mfd. 2016 Siemens CNC control Motors and controls Stock stand and stock reel with enclosure (2) 2-Axis CNC Slides in Pos. 4 and 5 Single Axis CNC Turret Single Axis CNC Auxiliary slides pos. 4th + 5th Turbo Chip Conveyor Machine configured as follows Pos. 1: Mechanical cross slide, Turret open Pos. 2: Mechanical cross slide, Turret open Pos. 3: Mechanical cross slide, Turret open Pos. 4: 2-Axis CNC Slide, Auxiliary single Axis Pos. 5: 2-Axis CNC Slide, Auxiliary single Axis Pos. 6: Mechanical cross slide, programable pick-up turret is single axis CNC With (6) Collet tubes Sold as-is where-is condition from current location. Buyer is responsible for shipping and rigging.