Used Ajce Ab-380F for sale (87,457)

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, type of input current: AC, overall weight: 3,972 kg, input voltage: 20,000 V, frequency: 50 Hz, Equipment: type plate available, Oil transformer according to Ecodesign Directive (Tier 2). The transformer has not been in operation so far. Dcsbvdev Awufohgrjg 12 month warranty

Condition: like new (used), Year of construction: 2023, operating hours: 700 h, Functionality: fully functional, travel distance X-axis: 200 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, rotational speed (min.): 1 rpm, rotational speed (max.): 25,000 rpm, coolant supply: 80 bar, Equipment: chip conveyor, documentation/manual, 4 Machines Available with identical configuration. Each machine ahs less than 700 spindle hours !!! Horizontal twin-table machining center with 2 spindles SPECIAL MACHINE FEATURES -Monobloc design -Linear and torque motor in the feed axes -Gantry drive in the Y axis -Mass optimized machining unit Box-in-open-Box -Workspindle optionally with HSK A40 or HSK E40 taper -Double swivel carrier with 2 integrated rotary axes for in-cycle loading / unloading -Trend-setting technologies that boost energy efficiency -Central workstation Description The BA W02-22 is a horizontal, twin-spindle machining center. Mainly used for 4- and 5-axis machining of small non-ferrous metal workpieces. The linear and torque motors of the feed axes guarantee with a maximum workpiece accuracy, the highest possible dynamics and very short non-productive times. In order to ensure loading and unloading in parallel to the machining time, the BA W02 is equipped with a double swivel trunnion Linear motors The use of linear motors in the feed axes X, Y and Z makes it possible to achieve speeds of 120 m/min (X- and Y-axis) and accelerations up to 22 m/s² (Z-axis). Linear motors have significant advantages over conventional drives with ball screws in terms of energy, wear and noise emissions. Three-phase synchronous motors are used in the BA W02-22. Workspindle Two different motor spindle types are available with HSK 40 interface for the BA W02-22. HSK A40, 25,000 rpm: This synchronous motor spindle features high dynamics. It has a core spindle with a very low mass moment of inertia. This allows for a very short run-up time to a maximum speed of 25,000 rpm with a constant high torque. This results in a consistently short chip-to-chip time over a speed range up to 10,000 rpm and best times for thread cutting. TECHNICAL DESCRIPTION OF STANDARD MACHINE - BA W02-22 WORKING RANGE linear axes Spindle distance 250 mm X axis 200 mm Y axis (tool change position) 350 mm (525mm) Z axis 300 mm WORKPIECE CARRIER A/U Swivel carrier system with plane surface gear teeth (Q-axis) Swivel time 0° / 180° 2.25 s Max. asymmetrical loading Repeatability accuracy relative to 500 mm 0.005 mm Two independent rotary axes (A-axis/U-axis), suitable for holding clamping bridges. The rotary axes, each consisting of a directly driven NC rotary tables with direct and absolute angle measurement and a counter bearing Max. dimension of fixture/workpiece 425mm x 630mm Max. weight of fixture/workpiece 160kg Dcjbeu Im Enevdhgreg Peak torque (standard) 420 Nm WORKSPINDLE HSK A40 Liquid-cooled motor spindle based on AC synchronous technology Speed range 1-25,000 rpm

Year of construction: 2017, operating hours: 400 h, Condition: excellent (used), Functionality: fully functional, A high-end Austrian complete / turn key Brewery, newly purchased in 2017 directly from the owner. It has only been used approx. 100 times in 5 years. Maintained very well. It can do 2 brews simultaneously, so effectively a 10HL machine. Complete with 4 Uni-tanks of 12 HL and all necessary equipment, as well as all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Delivery possible per direct, located in the Amsterdam area. Dsbvdov R Evajhgrecg

Year of construction: 2021, operating hours: 360 h, Condition: like new (used), Functionality: fully functional, machine/vehicle number: 124921T4092C, Tabarelli T4092c material handler equipped with a 500L GUSELLA BAKKER grapple. Deutz 95kW (130hp) 4-cylinder 3.6L diesel engine. Common Rail Injection - Turbocharged - Stage 5 emission standard. Fan reverse flow - 170L fuel tank. 24V electrical system - 2x 100Ah batteries. Variable displacement axial piston pump (Kawasaki) - 220L/Min / 320B. Load-Sensing control - 270L hydraulic tank capacity. Safety valves for boom and arm cylinders. 4WD hydrostatic travel - 2 speeds (0 to 4 km/h and 0 to 14 km/h). Axles with epicyclic reduction gears - oscillating front axle with lock. 10.00/20 double wheels with spacers. Front blade - 2 rear stabilizers - 2.50 m wide. Rotation by hydraulic motor and reduction gear. Swing ring with internal teeth, 1 to 7 rpm. Hydraulically raised cab - Steering wheel. Heating and air conditioning - Protective grille - Work lighting. Adjustable seat with suspension - Radio - Dashboard on left console. Controls by single-lever joysticks integrated into the seat. Travel controls by pedals. Electric controls for auxiliary hydraulic functions. Debsv Untiovdhgrocg Centralized 12-point automatic lubrication system (arm and turret).

Year of construction: 1987, Condition: excellent (used), machine/vehicle number: Abus 2to MM2, ABUS crane sky crane runway bridge crane indoor crane crane Payload / lifting load 2t - 2000KG, track about 2700mm External dimensions approx. 3100mm approx BJ 1987 with corridor control Overall height from top edge of crane to hook approx. 900mm Head carrier length without buffer approx. 2200mm Crane is dismantled, stored and immediately available. Very good condition There are also pillar slewing cranes and wall slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Dcsbvsifyhhodhgrjg Shipping by forwarding agency possible, please ask for postal code Collection preferred

Year of construction: 2011, Condition: as good as new (ex-display), I sell the automatic CNC working centre for BLOCK-HOUSE production Stromab Autoblox. Year 2011. New machine. Incutting saw 600mm / 7,5kW Dowel drilling unit up to dia.35mm x depth up to 320mm Dcsbvdhogiwkuogrog Tenoning head up to dia.230mm / 4kW Horizontal milling up to dia.230mm / 4kW Vertical milling up to dia.180mm / 4kW Automatic feeding system +-1mm Suitable for wooden house constructions! Available immediately.

Condition: ready for operation (used), ABB SDM251-000N5 servo motor SN 5010268, used, minor signs of wear, 100% functional, scope of delivery as per photos Debvdholpkqusgrjcg

Condition: new, Year of construction: 2024, Folding length 3020 mm Pressing force 135 t Infeed speed 140 mm/s Bending speed max. 10 mm/s Retraction speed 130 mm/s Stroke 320 mm Installation height 550 mm Projection 450 mm X-travel 750mm X- speed 300mm/sec. R- travel 250 R- speed 100mm/sec. free column passage 2555 mm Machine length 3730 mm Machine width 2300 mm total height 2850 mm Machine table height 900 mm Motor power 15 kW Oil tank 190 l Machine weight 9500 kg Dcobvdoq Rdtqjhgrsg (technical data may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Double-guided press beam, stable and precise Stable back gauge, double-guided Manual stop fingers double-guided on linear guide Sliding front arms with height adjustment Side and rear protective covers Lower die adapter rail 60 mm Man. Top tool clamping system (Promecam system) Manual crowning Foot switch with emergency stop switch 380 V, 50-60 Hz, 3 phases LED lighting Recommended options: Dener control unit DA 66T Fiessler AKAS 2M laser finger guard + FPSC Safety PLC (manual) X-R axis with servo motors CNC crowning for high bending accuracy 2 additional stop fingers - Further processing lengths and thicknesses are available with corresponding accessories! -

Condition: new, Functionality: fully functional, Year of construction: 2025, Microsilica, also known as silica fume or condensed silica fume, is a byproduct of producing silicon metal or ferrosilicon alloys. Microsilica powder grinding mills are used to process microsilica powder for various applications, including the production of high-performance concrete, refractory materials, and other specialty products. Grinding mills play a crucial role in reducing microsilica particles to the desired fineness. Here are some key aspects related to microsilica powder grinding mills: 1. Mill Types: - Ball Mill: A traditional ball mill is commonly used for grinding microsilica. It relies on the impact and attrition forces to reduce particle size. It is effective for both wet and dry grinding. - Vertical Roller Mill (VRM): VRM technology is known for its energy efficiency and the ability to grind materials into a narrow particle size distribution. It is suitable for grinding microsilica. 2. Grinding Process: - The grinding process involves feeding microsilica particles into the grinding mill. The grinding media (balls or rollers) inside the mill crush and grind the microsilica particles into a fine powder. 3. Particle Size Distribution: - Controlling the particle size distribution is crucial for achieving the desired properties in the final product. The grinding mill should be equipped with mechanisms to control and monitor particle size distribution. Djbvdheq Nxp Sjgrscg 4. Mill Design and Components: - The design of the grinding mill, including the type of grinding media, liners, and the grinding chamber, influences the efficiency and performance of the milling process for microsilica. 5. Air Classification (Optional): - In some cases, air classification systems are integrated into the grinding process to separate fine particles from coarser ones, ensuring a more uniform product. 6. Control Systems: - Advanced grinding mills often come with automated control systems to regulate various parameters such as feed rate, mill speed, and product fineness. 7. Material Handling: - Efficient material handling systems are essential to transport microsilica to and from the grinding mill. This may involve pneumatic or mechanical conveying systems. 8. Cooling Systems: - Grinding processes generate heat, and efficient cooling systems are often integrated to maintain the temperature within a controlled range. 9. Dust Collection: - Microsilica powder grinding can produce airborne dust. Dust collection systems are necessary to maintain a clean and safe working environment. 10. Quality Assurance: - Grinding mills for microsilica should be equipped with quality assurance features, such as in-line particle size analysis, to ensure consistency in the final product. When selecting a microsilica powder grinding mill, factors such as production capacity, energy efficiency, and the required particle size distribution should be considered. Additionally, mills should be chosen based on the specific characteristics of the microsilica being processed and the intended application of the final product.

Condition: ready for operation (used), Year of construction: 2012, General Data Machine weight 150 kg Control Unit Dsbvdhgsuhii Terscg Brand ABB Model IRC5 M2004 Main Drive Number of axis 6 This 6-axis ABB IRB 1600 8/1.45 robot was manufactured in 2012, featuring a maximum load capacity of 250 kg and a reach of 1.45 meters. It includes an IRC5 controller with a 4-port Profinet card and a teach pendant. Ideal for varied automation tasks, the ABB IRB 1600 8/1.45 robot we have for sale is a robust addition to any production line. Contact us for further details regarding this robot. Application Types Robotics

Condition: used, Year of construction: 2024, Annaburger HTS 22C.17 SchubMax Plus Year of construction 2024, demo machine used Dcjbjt N Aacsvdhgreg Technical data: permissible total weight: 23,000 kg Box volume: 38 m³ Equipment: Tandem professional hydraulic chassis with 1st axle as hydraulic lift axle and 2nd axle as hydraulically lockable self-steering axle Bottom hitch with K80 MMS comfort control Quick-Cover" roller cover with hydraulic operation Chopper attachment 150 mm, mounted on one side Electric "tailgate closed" signal Load sensing without amplifier Short underride guard Lamp holder on the tailgate 650/55 R26.5 Alliance tires 40 km/h approval | Internal no.: 11192320

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 5218716, type of input current: three-phase, overall weight: 7,840 kg, input voltage: 16,800 V, frequency: 50 Hz, total height: 2,900 mm, total width: 1,700 mm, total length: 2,500 mm, nominal power (apparent): 4,000 kVA, secondary voltage: 16,800 V, primary voltage: 3,300 V, protection type (IP code): IP00, nominal current: 700 A, temperature: 60 °C, ambient temperature (max.): 40 °C, type of output current: three-phase, output voltage: 3,300 V, operation weight: 7,000 kg, Equipment: documentation/manual, type plate available, This feed-in transformer was completely overhauled in 2022 (all new windings including final inspections). All receipts for the overhaul (over EUR 180,000) and the manufacturer (built in 2001) are available. The device is in mint condition and was no longer operated after the general overhaul. Djbvdsvpdkgehgrscg

Condition: ready for operation (used), ABB 86413006V004VG5M synchronous servo motor SN: BS021869, used, normal signs of use, 100% functional, scope of delivery as per photos Dcjbvdheq S H Dzjgrog

Condition: good (used), Functionality: fully functional, mileage: 540,000 km, power: 323.62 kW (440.00 HP), overall weight: 26,000 kg, fuel type: diesel, axle configuration: 6x4, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2011, first registration: 07/2011, Equipment: ABS, crane, cruise control, differential lock, hydraulics, Good condition! Ready to drive! Dcsbvdhsufch Degrjg 6X4 LEAF/AIR SUSPENSION Crane Hiab 211-5 with radio (year 2011) 5 extensions with rotator (15m) Euro 5

Year of construction: 1994, Condition: ready for operation (used), An IR reflow oven SAB is available. Voltage: 220V, current: 10A, power: 2.2kW, machine dimensions X/Y/Z: approx. 670mm/350mm/300mm, weight: approx. 30kg. On-site inspection is possible. Dcobvdhgsv Suf Tsrog

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Exhaust air scrubber, gas scrubber, wet scrubber, exhaust fan 8 units in total Debvov Sitledhgrjcg Year of manufacture 2002 The systems only operated for approximately 3 years

Condition: new, Year of construction: 2024, Annaburger HTS 29G.14 Tridem dump truck Year of construction 2024, demo machine used technical data: permissible total weight: 30,000 kg Box volume: 31.5 m³ Unladen weight: approx. 9,000 kg Equipment: Tridem parabolic chassis with 1st and 3rd axle as hydraulically lockable self-steering axle - middle axle rigid WABCO 2-ladder air brake system Hydraulically sprung drawbar Dcjbvdhgot Nz Uxereg MMS comfort control Bottom hitching via K80 ball head Roll-up tarpaulin with operator platform Internal chopper body, 490 mm 710/50 R26.5 Alliance tires 40 km/h approval | Internal no.: 11219208

Condition: reconditioned (used), Year of construction: 2005, -Primary impactor crusher, complete static assembly. -Babbitles primary impactor. Djbveimwybsdhgrscg Intake mouth 2350 x 1500 mm. . Engine 500 hp. -New bearings, shaft and supports. -New striker bars. -Articulated plate feeder width 1400 mm length 5000 mm. Condition of the feeder good condition Disc pre-screener width 2000 mm diameter 1000 mm. reducer and electric motor. -Hopper with capacity for 40 m3. screwed and dismountable by parts for its transport. -The whole set is mounted on a bolted chassis. -The whole unit can be transported in a sea container.

Condition: ready for operation (used), ABB Robotics 2 x PS 60/4-50-P-LSS-3985 servo motor combination SN: 910.8090020-063 / 910.8090020-029, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Dcsbvdoi D Eycshgrsg

Year of construction: 2011, Condition: good (used), Object of sale: 1 x BetaIMAGER ™ D incl. PC and software Item is from 04/2011 Condition: - This offer is a used article, which under certain circumstances may show signs of use (minor scratches or yellowing). - The article has been checked for function. - Sale as shown on the pictures. Dsbocx Rxyevdhgrjcg Manufacturer information: The BetaIMAGER ™ D FINE system is the system of choice for applications with small tissue sections and where the best spatial resolution is required. Four samples, up to 24 x 32 mm, can be loaded into the automated system for sequential image acquisition. The spatial resolution is as high as 10 µm achieved with tritium. The BetaIMAGER ™ D FINE The BetaIMAGER ™ D FINE system is the system of choice for applications with small tissue sections and where the best spatial resolution is required. The D-FINE is the perfect complement to PET and SPECT molecular imaging. The BetaIMAGER D FINE is 50 times faster than a film with a tritium-labeled sample and allows precise quantification. In addition, the instrument has a 10 µm resolution for tritiated samples. The most important advantages: - Fast and easy to use. - Real time display - danger of overexposure is minimized. - White light imaging allows accurate visualization of the sample. - Non-destructive probe: Disks are not damaged during measurement. - Detects and filters two or more isotopes. - Precise quantification.

Condition: ready for operation (used), Year of construction: 2020, Control Unit Brand ESAB Model VISION T5 CNC Additional Equipment Cutting with Bevel and V and Y Bevels X-axis with a guide length of 11,000 mm and dual motorization 1 synchronized axis spindle for tube cutting1 synchronized axis spindle for tube cutting 3 tube support carriages manually positioned via trapezoidal screw 1 carriage for the ESAB iSeries300 plasma generator with a maximum power of 300A 1 VBA WRIST bevel cutting unit Plasma torch collision protection system Torch height control with arc voltage and touch sensor for bevel cuts 1 safety system made with photocells Djbsuznbkevdhgrecg 1 ESAB PIPE CUTTING programming software This plasma cutting machine was manufactured in 2020. It features a robust ESAB iSeries300 plasma generator with a 300A output and a VBA WRIST bevel cutting unit capable of intricate bevel and tilt cuts. The ESAB VISION T5 CNC enhances usability with its 18.5" touch screen. Ideal for handling tube lengths up to 8000 mm and diameters from 100 mm to 750 mm. Consider the opportunity to buy this ESAB SUPRAREX 3100 plasma cutting machine. Contact us for more information. Application Types Cutting

Condition: excellent (used), Functionality: fully functional, Year of construction: 2009, operating hours: 5,000 h, machine/vehicle number: V316, 15 - 20 tonn flakicemaker in perfect condition with or without compressor package to be used for HFK refrigerants or NH3 Dobvdhsv Npzkogrscg

Condition: used, Year of construction: 2024, Annaburger HTS 29G.14 Tridem dump truck Year of construction 2024, demo machine Djbvdot Nz U Sohgrocg technical data: permissible total weight: 30,000 kg Box volume: 31.5 m³ Unladen weight: approx. 9,000 kg Equipment: Tridem parabolic chassis with 1st and 3rd axle as hydraulically lockable self-steering axle - middle axle rigid WABCO 2-ladder air brake system Hydraulically sprung drawbar MMS comfort control Bottom hitching via K80 ball head Roll-up tarpaulin with operator platform Internal chopper body, 490 mm 650/55 R26.5 Alliance tires 40 km/h approval | Internal no.: 11219197

Condition: ready for operation (used), ABB 86413006V004VG5M synchronous servo motor SN: BS021870, used, normal signs of use, 100% functional, scope of delivery as per photos Dcebvdhgsq S H D Eorog

Condition: ready for operation (used), Abel EM-025Z0110-SG electromagnetic diaphragm pump SN:30001098-02 + Lenze GST06-2M VAL 090C12 spur gear + MHEMAXX090-12C1C three-phase motor - with pressure switch and EN 837-1 pressure gauge, used, in good condition, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dcsbjugyymevdhgrog