Used Ajce Ab-180F for sale (87,407)

Condition: ready for operation (used), Condition Used Stock Number 413078 This listing is for a refurbished Laboklav 55M Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 55l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Doln Uibevym A Hsfskl Outer dimensions (w x h x d in mm) 740 x 765 x 600 chamber dimensions (Ø x d in mm) 410 x 460 Steam generator 3,3kW Fast re-cooling with double jacket 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Condition: excellent (used), Jabsco 200 pump, Stainless pump, 18l hopper, up to 200L per min, 316 stainless, temp 4'C - 70'C, ideaf for pumping foods, sauces, dough, meat pastes, liquid egg, yogurts, creams, dairy products, pharmaceutical products and lots more, 1.5Kw motor, 3Ph Dksln Uijic Nqmobfjl

Year of construction: 1995, Condition: like new (used), table height adjustment Dkjlog E Uqrsn Uibfjl engine power 2.2 kW 2800 rpm 2 suction connections, 100 mm power supply 400V

Condition: used, Functionality: fully functional, Year of construction: 2009, carrying capacity of cage: 600 kg, lifting height: 32,000 mm, lifting power: 600 kg/m, platform length: 5,800 mm, platform width: 1,200 mm, overall weight: 21,500 kg, empty load weight: 21,500 kg, transport length: 6,420 mm, transport width: 1,390 mm, transport height: 3,200 mm, construction height: 3,200 mm, next inspection (TÜV): 12/2025, fuel type: electric, tire condition: 90 %, drive condition: 25 %, ground clearance: 250 mm, color: yellow, Equipment: UVV, all wheel drive, Batteries new Dkeln Ujv Dvgcjibfol Condition well maintained

Condition: good (used), Year of construction: 2014, operating hours: 1,929 h, lifting height: 20,000 mm, fuel type: diesel, Equipment: all wheel drive, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Deutz Weights Empty weight: 11.000 kg Functional Lifting capacity: 750 kg Working height: 2.200 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Emission level: Stage IIIA / Tier III Dslnst S Sx So Uibfokl Delivery terms: EXW Additional information Please contact Sales Department Collé Sittard for more information

Condition: excellent (used), Steam cleaner for crates/containers 60x40 Brand Maskinfabrikken Hillerslev a/s, plastic chain, belt width: 350 mm, clearance: 650 mm x 200 mm, Djln Ujv Ey Ugeibfskl overall dimensions: 7300 mm x 1500 mm x 2000 mm

Condition: ready for operation (used), Condition Used Stock Number 413077 This listing is for a refurbished Laboklav 25B Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Horizontal device, 25l, glass lid Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW 1N 230V, 50Hz, 16A Djln Uiovym A Tjbfokl Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Condition: good (used), Year of construction: 2022, machine/vehicle number: ITJ589423, volume flow: 14.4 m³/h, pressure (max.): 10 bar, Equipment: type plate available, We offer: Compressor ABAC SPINN2.2 S/N :ITJ589423 YEAR: 2022 Dkelov E Hlfsn Uibfsl CAPACITY (kW): 2.2 OUTPUT (m3/min): 0.24 CIS (bar): 10 S015452

Year of construction: 2008, Condition: excellent (used), 3kW engine 1415 rpm Dkelneg Sbc So Uibfel Two-knife head Robust construction

Year of construction: 2007, Condition: ready for operation (used), A complete CNC gantry plasma cutting machine ESAB is available. Travel X/Y: 12000mm/4000mm, max. workpiece dimensions X/Y: 12000mm/3000mm, max. material thickness steel: 150mm, total system dimensions X/Y/Z: approx. 15000mm/5200mm/1500mm. System components: Cooling unit Kjellberg KWE 360, gas box Kjellberg PGV 3 and plasma connection Kjellberg PBA-360. The system has fire damage. Documentation available. On-site inspection is possible. Dkjln Uov Dkcfoibfsl

Condition: good (used), Year of construction: 2014, operating hours: 1,445 h, mast type: telescopic, fuel type: diesel, General information Field of application: Construction Drivetrain Make of engine: Deutz Weights Empty weight: 8.290 kg Functional Lifting capacity: 250 kg Working height: 1.570 cm Doln Ujt S Ru Tjibfskl Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Max. horizontal reach: 1300 m Additional information Please contact Sales Department Collé Sittard for more information

Condition: used, Year of construction: 2000, travel distance X-axis: 1,800 mm, travel distance Y-axis: 425 mm, travel distance Z-axis: 400 mm, table load: 800 kg, included: - Chip conveyor with integrated IKZ system Dkslnoq Ebhnj Uibfjl - Various fixture beams and accessories (rotary axis) - Various spare parts, clamps, pliers, ..... - Complete machine documentation/folder with maintenance/repairs, ... Offer on request

Condition: ready for operation (used), Condition Used Stock Number 413080 Dolsvym Atsn Uibfekl This listing is for a refurbished Laboklav 135M Autoclave 2018 Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Offered is a used 2-axle vacuum truck. Very good condition, fully functional. Year of manufacture 2011. Doln Usv A Uh Njibfskl Details: see type plate.

Condition: good (used), Year of construction: 1998, Functionality: fully functional, ram adjustment: 40 mm, installation height: 2,400 mm, total width: 17,000 mm, table length: 400 mm, table width: 400 mm, pressing force: 25 t, stroke adjustment: 17 mm, sheet width: 200 mm, overall weight: 2,500 kg, year of last overhaul: 2023, power: 0.003 kW (0.00 HP), Make: MABU Model: 25 VPR. Made in Germany. Max. Pressure: 250 [kN] (25 [T]). Speed range: 80-400 [spm]. Dsljq Ikhpjn Uibfokl Completely rebuilded Dec. 2023 Year of manufacture: 1998. Operating modes: Manual, One-cycle and Automatic. Equipped with two hand start and foot-clamp start. Fixed stroke: 17 [mm]. Ram adjustment: 40 [mm]. Max. Tool dimensions: 400 x 400 [mm]. Power: 3 [kw]. Current: 230 / 400 [V]. Air connection: 5.5 [bar]. Feeder: Silicon SFS 200 on left-hand side. Max. strip width: 200 [mm]. Machine dimensions: H 2350 x W 1700 x D 1400 [mm]. Weight of machine: cca. 2500 [kg]. Electrical cabinet with Mabu Pf 1.3 control. Front and rear safety guards with inspection glass. Technical documentation and operating instructions in English and German included. CE certificate and EUR-1 certificate of origin. On stock, tested and ready for delivery. More used machines from Mabu, Bruderer, Bihler and Schaal available on our stock for sale.

Condition: new, The Stromabstop Automatic Positioning System is crafted from years of industry experience in manufacturing fully automatic crosscut saws. Designed for ease of use and compatible across various applications, the Stromabstop applies precision cutting without the hassle of measuring and marking. With consistent accuracy, this intuitive positioning stop streamlines operations, whether for cutting, drilling, or other tasks. Programming is effortless with a user-friendly touch screen control panel, with USB connectivity for seamless importing of cutting lists. Optional optimisation software further enhances efficiency, making the Stromabstop the ultimate solution for precise, hassle-free positioning in your workflow. Available in working lengths of 3000 - 4500 - 6000 and 7000mm* *generally available from stock in 3000, 4500 and 6000mm lengths Dkelneriuuto Uibfel Reversible left or right direction Anodised aluminium profile 105 x 90mm Reinforced 32mm toothed belt Single phase motor 6 Nm 115 - 230v Positioning speed 60m/min Repeat precision +/- 0.1 mm Smart 7" touch screen colour control unit 3 working modes: MANUAL for absolute or incremental working / PRESET with 8 pre set positions and AUTOMATIC cutting list mode USB port for importing cutting lists

Condition: good (used), Year of construction: 2017, lifting height: 20,000 mm, fuel type: diesel, Equipment: all wheel drive, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Hatz Weights Empty weight: 11.000 kg Functional Lifting capacity: 750 kg Djljt S Sy Hsn Uibfokl Working height: 2.200 cm Condition Technical condition: good Visual appearance: good Other information EPA Marked: yes Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Additional information Please contact Sales Department Collé Sittard for more information

Year of construction: 1991, Condition: good (used), double-girder overhead crane, bridge crane, hall crane, assembly crane, workstation crane, ceiling crane, travelling crane, crane system Dkolou H R Drjn Uibfel -Equipment: with electric cable hoist ABUS type GM 3100F6-201.41.063 DQA, floor operation -Load capacity: 10,000 kg -Track width: 7.4 m -Dimensions: 2970/7550/H675 mm -Weight: 2800 kg

Condition: ready for operation (used), Condition Used Stock Number 413079 Dkeln Uovym Ayeibfel This Listing is for a refurbished Laboklav 80 MV Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 80l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 915 x 600 chamber dimensions (Ø x d in mm) 410 x 610 Steam generator 6,6kW Vacuum incl. pre- and postvacuum, heating during postvacuum Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Year of construction: 2014, Condition: good (used), ABG SGTR 510-4 Turret Rewinder Year of Manufacture: 2014 _____ Machine Specifications and Equipment:  Manufacturer: AB Graphic  Machine type: SGTR 510-4  Core connection: Glueless  Year of manufacture: 2014  Working width: 510mm  Speed: 150 m/min  Max. roller diameter: 350 mm  Pneumatic winding spindles: 4 x 76 mm  Counter: Indication in label pieces and meters  Automatic roll ejection mechanism  Programmable closure label printing and dispensing station incl. CAB A2+/300P  Device for separating the web exactly in the lattice web (tolerance (+/- 2 mm at 70 m/min)  Electronic job data memory (500 jobs)  6 x paper web dividers  End support for winding shafts to support mandrels under 38 mm diameter  Rotary paper web divider  Freestanding slitting module with shear cut unit (serial number: 134V-1233, year of manufacture 2014)  Automatic core loader CLB 510 for pushing the cores onto the winding mandrel  Automatically adjustable core distance (gap between the cores)  Core diameter for the core loader: from 13 mm to 113 mm diameter (theoretical) and core length from 15 mm to 95 mm  Vertical core magazine _____ Accessories Included:  Manuals Dkelnev Di T Ae Uibfsl  Keyes  Etc. _____

Year of construction: 2015, Condition: excellent (used), Electric chain hoist Fabr.ABUS Type:GM 4 500.6-2 Year.2015 Load capacity.500 KG Lifting height 3 meter. Dkoln Usiunb Rjibfsl In good condition.

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Anodised aluminium profile 105x 90 mm Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, Djlon Nv Ugon Uibfokl USB port for importing cutting lists

Year of construction: 2022, Condition: ready for operation (used), Condition Refurbished Stock Number 413082 This listing is for a refurbished Laboklav 80M Eco Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 80l   Sterilisation temp. 98-135°C   Outer dimensions (w x h x d in mm) 740 x 915 x 600   Chamber dimensions (Ø x d in mm) 400 x 610   Directly heated (heating elements)   Fast re-cooling by air   Deln Ujvym Agoibfokl 1N 230V 50Hz 16A, connection to tap water and drain recommened (use of condensate collector possible) Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Dkeln Uiody Hrdobfjl Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Djln Uisb Tmwaobfskl Dust outlets 2 x 100mm diameter