Used Walinga Agri-Vac 3510G Grain Vac for sale (7,309)

Condition: used, Used Praj Industries approximately 10m litre/year (approximately 1,211 litre/hour) ethanol recovery system. Includes, pre-heaters, degassifying column, Ethanol distillation column with 20 sieve plates in stripping section and 20 bubble plates in rectifying section, forced circulation reboiler, 2 x main condensers, distillate condensate collection tank, 2 x pre-distillate condensers, pre-distillate collection tank, vacuum pump, scrubber and various pumps, valves, instrumentation and pipework. Fpeb Esvtn Uqs Nuq Seg

Condition: excellent (used), Year of construction: 2019, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Mobile welding fume extraction, dust extraction, self-cleaning, pneumatic, vacuum filter from KEMPER. For welding, grinding and all types of dry dust. Self-cleaning welding fume filter with contamination-free dust collection. The mobile KEMPER MaxiFil Clean cartridge filter is designed for continuous operation for the filtration of welding fumes and highly concentrated dust. Suitable for use with all welding methods for carbon, low-alloy and high-alloy steels and aluminium. Economical in operation thanks to the long service life of the filter element. Thanks to the IFA-W3 approval, the basic filter can be used for welding high-alloy steels. Parameters: Efficiency - 1100 m3/h Max negative pressure 3200 Pa Three-phase fan with a power of 1.5 Kw Filtration surface - 15 m2 Year of production - 2019 Patron Filter Insert with PTFE membrane Purification degree - > 99.97 % Preliminary spark separator. Built-in delay time regulator in start-stop mode. In the case of connecting a start-stop sensor (optional), the delay time of extraction after the welding process can be set to 5-60 seconds The device is in very good condition. Several pieces available. Fsb Eotq E Sie Nuq Sjpg The price in the advertisement is for 1 piece.

Year of construction: 2011, Condition: used, weight 16600 kg C Fpeb E Nuqewhq Dcj Ssg serial number 132060114

Condition: used, Manufacturer: Usifroid Reference: SMJ 100 FPI Type: freeze dryer Number of trays: 2 Surface area per tray: 100 cm x 50 cm 2 air compressors 1 Cold unit: R22 and 502 Fpjb E Nuqevly Umj Ssg 1 circulation pump 1 heating system Missing parts: Hydraulic unit Vacuum pump

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Febewhr I Nj E Nuq Sopg Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, CCM MUS-MAX feed/grain mixer, stainless steel, capacity: 500 kg, gear motor: 3.0 kW, rust spots Fpeb E Nowhwzhsuq Ssg Note: This is a starting price. The sale will be conducted in an online auction against the highest bidder (plus premium and VAT). Please follow the link for more photos and information.

Condition: used, Used Praj Industries approximately 5,000 litre/hr inlet flow furfural recovery system. Fjbsvtn Evo E Nuq Sopg Includes Furfural distillation column with 20 sieve plates in stripping section and 10 sieve plates in rectifying section, forced circulation reboiler, 2 x main condensers, distillate condensate collection tank, azeotrope side drawn collection tank, Azeotrope cooler, water/furfural tank, decanted raw furfural collection tank, vacuum pump, scrubber and various pumps, valves, instrumentation and pipework.

Condition: used, operating hours: 903 h, Mobile welding fume extraction station. Dust extraction, self-cleaning filter, pneumatic, vacuum Fjbovygz Aj E Nuq Sepg NEDERMAN FILTERBOX 663 Device with pneumatic and electric filter cleaning. Can be used for continuous operation and for occasional welding processes. Only 900 hours worked. 1.5 kW fan placed on the clean side. Three-phase motor Noise silencer 4 m long extraction arm. Stock no.: 0952

Condition: new, overall weight: 11,600 kg, empty load weight: 3,090 kg, maximum load weight: 8,510 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,430 mm, suspension: steel, tire size: 355/60 R 18, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 355/60 R 18, rear tire size: 355/60 R 18, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way side tipper, drop sides 500 mm high, galvanized, width tires 355/60 R 18, loading height approx. 970 mm, central locking for side and rear drop sides, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 12 x strong lashing eyes recessed in the floor, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions pluggable, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, contour marking according to ECE R 048 regulation, , surcharge for aluminum ramps load capacity 10 t per pair and 2 x folding supports, rear, ramps suitable for steel track vehicles and rubber tyres, price: 1.500 Euro, , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Feb E Nuewhyvnsq Sepg

Condition: used, Year of construction: 2012, Sanding width: 1.100 mm Workpiece thickness min: 3 mm Passage height max: 150 mm Sanding aggregates total: 1 Sanding rollers: 1 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Segmental pressure pad: electronic Jump-in control: electropneumatically Jump-in control: Yes Vacuum table: Yes Fpob E Nuqjwh U Sde Seg Main motor power: 15 kW Sanding belt length: 1.900 mm Belt speed max: 18 m/s Feedrate max: 13 m/min Continuously variable feed: Yes Blow-off device: Sanding belt Configuration of aggregates: c-u Side of belt change: Left Control: BÜTFERING TE 11 Conformity marking: CE mark Total connection: 17 kW Space requirement Length: 1,4 m Space requirement Width: 1,8 m Space requirement Height: 2,1 m

Condition: used, Manufacturer: Guedu Year : 1986 Type : Reactor dryer Engine : hydraulic Reactor volume: 280 L Shell circuit : Tank: 14.6 L / 0.9 m2 Bottom: 13.75 L / 0.55 m2 Fob Eovlyw Uo Nuq Sjpg Corrosion allowance: 1 mm Test pressure (half shell): 12 bar Working pressure (half shell): 6 bar steam Test pressure (tank): 6 bar Working pressure (vessel): 3.99 bar gas and 10 torr vacuum Operating temperature: - 20°C + 160°C Welding coefficient : 0,7

Condition: reconditioned (used), Functionality: fully functional, • Special drawing depth max. 450 mm • Window plate • 4 cooling fans • Upper punch with remote control • Vacuum on the upper punch Fob E Nuswhuhloq Sjpg • Film sag control • Adjustable motorized clamping frame • Bottle heater • Heating pyrometer • Pneumatic UHZ • Motorized OHZ • Temperature control on the upper punch

Condition: used, Used Alfa Laval 316L stainless steel 3-effect plate evaporator system. Designed evaporation capacity approximately 28,000kg/hr. 1st & 2nd evaporator effects with rising film evaporators (AlfaVap Plate) model AlfaVAP 650-FL) utilising MVR (Mechanical Vapor Recompressor). 3rd effect (Finisher) with forced circulation (AlfaFlash MX25-MFMS) utilizing hot water as a heating medium. Feb E Nuqjvtn Iwo Sjpg System includes (6) plate heat exchangers, (3) cyclone separator vessels, vacuum pump, various circulation pumps, instrumentation, valves and framework.

Condition: good (used), Year of construction: 2006, Functionality: fully functional, The machine is live and can be inspected at any time. Maximum working area (X): 2535 mm Maximum working area (Y): 1280 mm Control: SIEMENS SINUMERIK 840D Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions and 3 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Part chute 500 x 500 mm - Good parts container - Chip container Punching head - Hydraulic punching head - Rotatable mono-tool holder - 360° rotation of all tools - Programmable hold-down device - Tool length compensation - Tool spray lubrication - Punch slug extraction - Forming Control - Open control system based on Siemens Sinumerik 840D - Control panel with 12.0" TFT color screen - Program management - Integrated technology data - Production plan - Teleservice Data transfer - Floppy disk drive and network connection - Network connection Safety - CE marking - Light barriers - Hydraulic quick shutdown Extended machine features: - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Marking/Fast beading function - Rolling technology function - Softpunch function - 1 additional clamping claw - 4 individually opening clamps Fpsb Eov S Albj Nuq Sog - 4 Height-adjustable clamps - Feed cylinder - Sensor for parts chute - Vibration-damped installation - Chip conveyor with tilting container - Hydraulic tank heating - Brush tables with loading and unloading aid - Blow-out device for small parts - MDE interface Automation: - SheetMaster (2500 x 1250 mm) Standard equipment - Peeling suction cup - Vacuum sensor - Central lubrication - Sheet thickness gauge for double sheet control - TASC 100 control system + Peeling system + Suction plate module - GripMaster (2500 x 1250 mm) - 400 mm scissor lift table - Skeleton clamps with sensors - Tiltable skeleton pallet - TrumaSort L - TrumaTool with 40 stations - Setup during production - Double loading trolley - 2 loading trolleys Including storage interface - Preparation for retrofitting the SortMaster Box

Condition: new, overall weight: 11,900 kg, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Fpjb E Nuswhyrisq Sjg

Condition: excellent (used), Year of construction: 2016, operating hours: 4,960 h, Functionality: fully functional, overall weight: 19,500 kg, power: 240 kW (326.31 HP), Doppstadt DW2060K Shredder/Shredder/Shredder 4960h - Manufacturer: Doppstadt - Type: DW2060K - Year of construction: 2016 - Operating hours: 4960h - Perm. total weight: 19500kg - Power: 240kW / 326PS - Engine: OM926LA - Maximum efficiency thanks to 100% mechanical drive - Limiter" fine shredding system - Contamination-resistant shredding - Grain limitation with limiter system - Choice of shredding packages - Robust tracked undercarriage with two speeds - Lower belt NEW - Discharge conveyor NEW - Rear steering NEW - Remote control NEW - German machine - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - - Our pool of machines is constantly changing and is always up to date on our website - - - We are also at your disposal by telephone Fsbjvkfp Te E Nuq Sjpg - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, Year of construction: 2015, Working dimension X: 3.090 mm Working dimension Y: 1.530 mm Working dimension Z: 85 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 11 Linear tool changer: Yes Vertical drilling spindles: 8 Gantry machine: beidseitig angetriebene Gantrymaschine Automatic central lubrication: Yes Machine table: Matrix table Tool charge measurement: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Fpobjwh Rnuo E Nuq Ssg Capacity vacuum pump: 500 m³/h Safety device: Light barrier Control: PC control Handheld terminal: Yes Software: FORMAT 4 WOOD FLASH Conformity marking: CE mark Total connection: 25 kW

Condition: excellent (used), Year of construction: 2006, Control: Fanuc 16i-TB Swing diameter over bed: 190 mm Turning diameter: max. 190 mm Turning length: max. 640 mm Bar capacity left: 51 / 65 mm, right: 51 mm Spindle nose ASA: A2-5 / A2-6 Chuck diameter: max. 165 mm Max. speed (51/65): 5000/4500 rpm Travel X1/X2/X3 axis: 167.5 mm Fsb E Nujwhwl Hoq Sjpg Travel Z1/Z2/Z3 axis: 250/250/685 mm Travel B axis (right spindle): 760 mm Rapid traverse X1/X2/X3 axis: 16 m/min Rapid traverse Z1/Z2/Z3 axis: 40 m/min Main spindle Spindle bore 51 mm Spindle nose A2-5" Drive power: FANUC AC 15 / 11 kW Spindle speed 50 – 5000 rpm C-axis main spindle Incl. spindle brake (disk brake) C-axis rapid traverse 600 rpm C-axis input resolution 0.001° Milling function for upper (L/R) and lower turrets 12 driven tools each, 1 of which is in use Drive power, AC 5.5 / 3.7 kW Speed 60 – 6000 rpm Y-axis for upper turrets L/R Drive power, AC 1.2 kW Travel + 61 / - 41 mm Incl. NC option Helical (thread milling) NC back-end machining unit (Subspindle) Bar capacity 51 mm Spindle nose A2-5" Drive power FANUC AC 11 / 7.5 kW Spindle speed 50 – 5000 rpm. C-axis subspindle (B) Technical specifications similar to the C-axis main spindle Basic machine equipment: - Standard hollow clamping cylinder with drawbar - Coolant system, 180L tank capacity, Grundfos pumps 5 bar, check valves - Splash guard with safety locking of sliding doors - Hydraulic pressure switch - Automatic lubrication system - Work area lighting - Tool storage - 400/220 (200) VAC transformer - Machine color (Space Color III) RAL 7035 Light Gray / RAL 7024 Graphite Gray, door RAL 7015 Slate Gray - CE-compliant safety equipment - Spindle synchronization - Foot switch for chuck actuation - Chuck safety interlock - Bar loading magazine interface - 1 set of technical documentation Fanuc 16i-TB control system: - 10.4" LCD color screen - LUCK-BEI II – Programming Support - NT-Nurse 2 – Cutting pressure monitoring, tool counter, sister tools, etc. - NT-Work Navigator – Torque type - Part program memory, 320 m = 128 kB (of which 20 m is required for NT-Nurse 2) per turret - Registerable programs, a total of 200 per turret - Extended tool offsets, 99 pairs per turret - Spindle speed override switch, left + right - Display of runtime and number of workpieces - Direct thread cutting on the main spindle - Direct thread cutting on driven tools

Condition: used, Year of construction: 2020, No. 3219 CNC machining center HOMAG CENTATEQ P-110 Venture BMG110/31/F/R Used, year of construction 2020 CNC-controlled processing center in moving gantry design, for milling and drilling workpieces made of wood or wood-like materials Travel speeds: X/Y-axis 60 m/min / X-axis 35 m/min / Y-axis 50 m/min / Z-axis 15 m/min - Program-controlled suction hood - Max. workpiece length, all units: single loading 3100 mm / pendulum loading 1025 mm - Max. workpiece length, tool diameter 25 mm: single loading 3275 mm / pendulum loading 1025 mm - Max. workpiece width, front stop: All units 1250 mm / milling tool diameter 25 mm 1250 mm - Maximum workpiece width, rear stop: All units 1230 mm / milling tool diameter 25 mm 1405 mm - Workpiece thickness: Max. 260 mm including clamping device - Operating voltage 400 Volt, 50 Hz - EC conformity (CE) - BUMPER safety technology with pressure-sensitive switching buffers in accordance with EN1760-3 - Drilling gear V12/32MM High Speed 7500, 1500 - 7500 rpm frequency-controlled, 2.3 kW - Grooving saw 0°/90° tiltable, 1500 - 7500 rpm frequency-controlled - H4X drilling unit, 1500 - 7500 rpm frequency-controlled - Drilling unit H2Y, 1500 - 7500 rpm frequency-controlled - Processing spindle 12 kW DRIVE5CS, frequency converter for electronic speed control from 1500 - 24000 rpm, 12 kW for S6 operation, 9 kW for S1 operation - Unit carrier for two Z-axes - Tool changer magazine 8 places at the rear - Linear tool changer fixed on the side 10 places - Tool length control - Tool holder saw DRIVE5CS - Fine-cutting saw blade diameter 350 mm - Basic structure raster table /31 - Raster table top - Lateral and longitudinal stop pins 140 mm - Two-part vacuum system for pendulum operation - Vacuum connection for templates - Supply unit for pneumatic clamping elements, right and left working field - Laser positioning aid - Vacuum clamp for grid table 140 x 130 x 45 mm LBH Fjb E Nuewhwqvoq Sjpg - Multi-clamp for R-table 10 - 100 mm - 10 m sealing cord diameter 8 mm for grid table - Vacuum system 290 / 345 m3/h - Energy saving function - POWERCONTROL with POWERTOUCH - PC keyboard: German - USB hard disk for image - Mobile operating terminal (10 m) - Permanently mounted control cabinet - TAPIO READY - Network connection Ethernet CNC - Manual operation wired for run-in operation - Comfort package operation - woodWOP for machine - woodWOP DXF-Import Basic (single user license) - Record and evaluate machine data - MMR - woodWOP Office Professional (single user license) - Language selection German - Documentation on data carrier - Documentation on paper - INTELLISERVICENET Sale on behalf of the customer, ex location near 73479 Ellwangen, without dismantling, transportation and assembly Disassembly, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, overall weight: 11,900 kg, empty load weight: 3,280 kg, maximum load weight: 8,620 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: steel, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fpsb Eewhnu Sj Nuq Ssg

Condition: excellent (used), Functionality: fully functional, mileage: 364,122 km, power: 170 kW (231.14 HP), first registration: 07/2000, overall weight: 11,990 kg, fuel type: diesel, axle configuration: 4x2, maximum load weight: 5,958 kg, empty load weight: 6,032 kg, Year of construction: 2000, Equipment: ABS, air conditioning, - Manufacturer: Mercedes-Benz - Type:Atego 1223 - First registration: 07/2000 - Kilometers: 364122km - Unladen weight: 6.032kg - Gross vehicle weight: 11.990kg - Power: 170kw /230PS - Gearbox: Manual gearbox - 4x2 - ADR - Aurepa tank body - 2 chamber - 1st chamber: 4,200L - 2nd chamber: 4.500L - Total capacity: 8,700L - A1 Delivery: gasoline, heating oil, diesel - Sening measuring system - Air conditioning - Diesel fuel - German vehicle - German papers - Ready for immediate use You also can have the description in another language by Email - Our service - - Export declaration-customs registration-yellow short-term license plates-red customs license plates. - Purchase of your used construction machine or commercial vehicle - we help you with financing - we offer you transportation solutions - Inspection and demonstration of the machines from Mon-Fri 9.00-17.00 (Saturday by appointment only). - Fsbsvgv The E Nuq Sepg - Our pool of machines is constantly changing and is always up to date on our website - - We are also at your disposal by telephone - - Sanisa GmbH - Otto Hahn Street 13 - 35510 Butzbach - - This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typing errors not excluded. - Sale to our AGB`s.

Condition: used, Year of construction: 2008, Working dimension X: 3.060 mm Working dimension Y: 1.260 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 18 Disc tool changer: Yes Number of exchangeable units: 3 Vertical drilling spindles: 14 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction BIESSE Drilling aggregate BH 21 L: Yes Cantilever machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Two rows of stops: Yes Fsb E Nuqowh Dgqe Sepg Workpiece support aids: Yes Number of consoles: 6 Pneumatic pipe connectors: Yes BIESSE Preparation for Uniclamp: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Special workpiece clamping system: For windows, For narrow workpieces, for frames BIESSE Uniclamp: Yes Safety device: Safety mat Interface for .dxf data: Yes BIESSE Remote control unit RM 850: Yes Automatic lubrication: Yes Control: BIESSE XP 600 Control cabinet cooling: Yes Software: DIREKT CNC ACADEMY, DIREKT CNC NC-HOPS Conformity marking: CE mark Weight: 3.200 kg

Condition: new, overall weight: 13,000 kg, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: compressed air brake, three-sided tipper, fire-galvanized drop sides, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fpjb E Nuswhnv Aeq Sjg

Condition: new, overall weight: 11,900 kg, empty load weight: 3,280 kg, maximum load weight: 8,620 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: steel, tire size: 245/70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fsb E Nuqowhnure Sspg

Condition: new, overall weight: 11,900 kg, empty load weight: 2,840 kg, maximum load weight: 9,060 kg, axle configuration: 2 axles, loading space length: 5,080 mm, loading space width: 2,420 mm, suspension: steel, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, central locking for side and rear side walls, automatic rear wall opening when tipping backwards, swinging and foldable side walls, side walls with spring relief, bridge floor made of 4 mm fine-grain steel, 4 pairs of strong lashing eyes sunk into the floor, 5-stage hard-chrome-plated three-way tipping cylinder, tipping angle: 50 degree tilt angle to the rear and 45 degree tilt angle to the side, continuously height-adjustable drawbar, geared support winch with load and fast gear at the front, contour marking according to ECE R 048 regulation, , --  Subject to printing errors, errors and changes, sample images --, more data at: !, more details: ! Fpsb Eewhnrwe Nuq Sjg