Used Bobcat S220 High Flow for sale (18)

Condition: not inspected (used), Year of construction: 1994, Operating hours: 41,564 h, Functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Jinbeyc Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: ready for operation (used), Year of construction: 2011, Additional Equipment Dynamic Waterjet XD FlowXpert Flow High-Pressure Pump Premium Catcher Tank - Stainless Steel Flow UltraPierce Laser Pointer Ur2Dtfzz8T Pure Water Cutting Documentation// Water Analysis Spare parts Operating instructions Programming software Approximately 750 kg of premium Garnet abrasive sand This waterjet cutting machine was manufactured in 2011. It features a FlowXpert high-pressure pump, dynamic Waterjet XD for 3D cutting, and a premium stainless steel catcher tank. Ideal for producing 2D and 3D parts with tight tolerances at high speeds. Includes a laser pointer and is prepared for an abrasive removal system. For more information about this waterjet cutting machine, please reach out to us. Application Types Cutting

Condition: used, Operating hours: 6,895 h, Functionality: fully functional, We are selling our Flow waterjet cutting system Gpfbdk Cutting area: 4x2m Pump: 6000bar 2 cutting heads (1 disconnected) lots of accessories (value approx. 20.000€) 2 cutting heads etc. This was put into operation by Flow in March. The major pump maintenance was carried out at the end of March (just under €40,000) and it has run for approx. 300 hours since then. Flow came back in August and replaced various seals and valves on the pump. All operation reports are available. Control system for automatic sand supply new New air conditioning units in control cabinet incl. software Please contact us for further information. Sold due to new acquisition. Crane + forklift available for loading.

Condition: like new (used), Year of construction: 2006, Operating hours: 4,342 h, Functionality: unexamined, Machine/vehicle number: 339 366, Year of construction: 2006 Working area: 3,600 x 2,000 mm With laser pointer and light barrier 1x sand silo 1x Flow sand mixing unit 1x water softener 1x collision sinks Box software incl. Regular maintenance C93Ex0I .

Condition: used, Functionality: fully functional, Good working condition. Please check out our other listings as well. Un9U7Xkdq9

Condition: good (used), Year of construction: 2000, Operating hours: 11,500 h, Functionality: fully functional, Machine/vehicle number: T-11-2000, Travel distance X-axis: 4,000 mm, Travel distance Y-axis: 2,000 mm, Travel distance Z-axis: 180 mm, Type of input current: three-phase, Input voltage: 400 V, Sheet thickness aluminum (max.): 150 mm, Operating pressure: 3,800 bar, Control cabinet height: 2,200 mm, Compressed air connection: 6 bar, Control cabinet width: 1,500 mm, Power: 37 kW (50.31 HP), Equipment: Safety Light Barrier, - Flow T11-2000 4x2 m used system - good condition Uhxjwrigjx - year of construction 11/2000 - Siemens S840 D - 1 cutting head Flow Paser 3 - Stainless steel cladding Flow with 20 new grating supports 1030 x 525 mm hot-dip galvanized - 1 ton of GMA abrasive sand Mesh 80 in 25 kg bags included - Abrasive conveying system Flow 2-chamber system - High-pressure pump Flow 7XS 60, electrically shifted, 60,000PSI, 3.8l/min, 37KW, 11,400 operating hours - 2 new heat exchangers, water-cooled, hydraulic pump generally overhauled for 2600 € - good condition - ready for demonstration by appointment in PLZ: D-47839 - 1 PC with Cambal CAD-CAM software - 1 PC with IGEMS Sweden CAD-CAM software / license - Dismantling, transport, assembly and training by MTWS GmbH for an additional charge - Without warranty - Available from 21.10.2024 Machine is sold without warranty and test cuts can be made on site.

Year of construction: 2011, Condition: good (used), The BD Accuri® C6 is a digital basic flow cytometer, which is equipped with a Blue (488nm) and a Red (640nm) lasers, two light scatter detectors (FSC and SSC), and four fluorescence detectors. The default configuration of the BD Accuri® C6 is similar to the FACSCalibur-2 (3-Blue 1-Red) with filters optimized for the detection of fluorochromes such as FITC, PE, PerCP, and APC. The Selectable Lasers Module allows operation of the system in two additional configurations (2-Blue 2-Red, and 4-Blue) and significantly expands the fluorochrome combinations that can be analyzed. BD Accuri® C6 is manufactured with standardized fluorescence performance so that users do not need to adjust detector voltages. Data is digitally collected over a 7-decade dynamic range (16 million channels of digital data), making all data available to users as needed. A unique low-pressure pumping system drives the fluidics. A sheath-focused core enables event rates of up to 10,000 events per second and a sample concentration of over 5 x 106 cells per mL. In addition, the system derives sample volume and can calculate absolute counts or sample concentration per microliter. The non-pressurized system of BD Accuri C6 supports any brand of sample tubes – 12 x 75 mm or smaller (including microcentrifuge tubes), made of polypropylene or polystyrene. BD Accuri® C6 CFlow SAMPLER supports the high throughput and fully automated acquisition from 48- and 96-well plates and deep-well plates. It is also supplied with a 24-tube rack for the walk-away acquisition of standard 12 x 75-mm tubes. Software version 1.026421 Vwiqpu

Condition: ready for operation (used), Year of construction: 2020, General Data Measurements width 2000 mm Measurements depth 4000 mm Measurements height 610 mm Control Unit Brand Flow Model FlowCUT Crybn77Tjs Movement X-Axis Movement 4000 mm Y-Axis Movement 2000 mm Additional Equipment HyperJet Pressure 6500 Bar Pump & Cooler Dynamic Waterjet XD 5 Axis Head with Height Sensor FlowXpert Programming Software Paser CF900 Abrasive Delivery System Ecoflow Abrasive Extraction System Sick Light Guards This Flow Mach 500-4020 Waterjet Cutting Machine was manufactured in 2020. It features a HyperJet Pressure 6500 Bar Pump & Cooler, Dynamic Waterjet XD 5 Axis Head with Height Sensor, and a Paser CF900 Abrasive Delivery System. With a bed size of 4000 x 2000mm and a maximum Z-axis travel of 610mm, the Flow Mach 500-4020 machine we have for sale is in excellent condition. Contact us for more information. Application Types Water Cutting

Condition: used, Year of construction: 2005, Operating hours: 4,493 h, Functionality: fully functional, Machine/vehicle number: WMC2, Working range: 20 mm, Input voltage: 380 V, Machine is operational in factory manuals and original spare parts available maintenance always by factory Italy placed new in 2005 for 310.000 € Declaration of conformity document available Intensifier pumps Dprxdb

Condition: used, Year of construction: 2009, Flow waterjet cutting system Type IFB 2-DWJ-ST 3620-SCC- P-UP-PW-50is-DCF-CS -LP-CLS Working area 3600x2000 mm Dynamic Waterjet Z-axis system High pressure pump model 50iS-60ESL also available as spare parts carrier in individual parts Dnjbsp

Condition: used, Functionality: fully functional, Flow Cabinet/Safety Cabinet. Good working condition. Please check out our other listings as well. Hu3Qyi0

Condition: excellent (used), Year of construction: 2020, Operating hours: 2,849 h, Functionality: fully functional, Machine/vehicle number: M542OCZX01, Working range: 4,000 mm, Travel distance X-axis: 4,000 mm, Travel distance Y-axis: 2,000 mm, Travel distance Z-axis: 610 mm, Type of input current: three-phase, Input voltage: 400 V, Table length: 4,000 mm, Table width: 2,000 mm, Pressure: 6.5 bar, Rapid traverse X-axis: 71,800 mm/min, Rapid traverse Y-axis: 71,800 mm/min, Operating pressure: 6,500 bar, Travel speed (max.): 71,800 mm/min, Equipment: Safety Light Barrier, Flow Mach 500-4020 Waterjet Machine Type: Waterjet Cutting Machine with 5 Axis Head Model No.: M500 4020 XD Year: 2020 Hours: 2849hrs Condition: Excellent Includes HyperJet Pressure 6500 Bar Pump & Cooler B9Farokteq Dynamic Waterjet XD 5 Axis Head with Height Sensor FlowXpert Programming Software Paser CF900 Abrasive Delivery System Ecoflow Abrasive Extraction System Sick Light Guards Technical Specifications Bed Size: 4000 x 2000mm Linear Positional Accuracy(from new): +/- 0.025mm Rapid Traverse: 17.8m/min Acceleration: 0.1g Repeatability: +/-0.020mm Ballbar Circularity(from new): +/- 0.0635mm Max Z Axis Travel: 610mm Software: FlowCUT

Condition: good (used), Year of construction: 2004, Record Scorpion Flow Wrapper Stainless Steel Touch Screen Control 140 packs /min Bmujhlajie Model Scorpion E Year 2004 4500mm infeed Overall length 6400mm ICE Printer Jaws 180mm l x 75mm H Video available on request

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material: 1.4408 stainless steel -without: drive -Connection: DN50 -Width: 152 mm -Nominal pressure: PN40 -Number: 1x valves available Mznqp -Price: per piece -Weight: 9.69 kg/piece

Condition: excellent (used), Year of construction: 2008, Operating hours: 664 h, Functionality: fully functional, Machine/vehicle number: 208-10724, Type of input current: three-phase, Machine is in use in the factory all spare parts and manuals are present maintenance always by machine builder Italy itself Cyov8Ccq0I European Union Declaration of Conformity ok Hyperjet

Condition: used, Year of construction: 2008, High-pressure pump from a complete water-steel cutting system Cdlnmslzhu

Condition: as good as new (ex-display), Year of construction: 2023, Short & sweet Base axis (X) : 1.3-2 mm Cantilever (Y) : 1.3-4 mm Accuracy : 0.06 mm Technical data Linear axis accuracy : ± 0.1 mm/m Maximum travel speed : 10 m/min Acceleration : 0.02 g Repeat accuracy : ± 0.06 mm Circularity : ± 0.1 mm Z-axis stroke : 180 mm Base axis (X) : 1.3 m, 3 m, 4 m Extension arm (Y) : 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce tapping aid1 Splash guard1 FlowTexturing (FTT) B80Zxheuin Abrasive de-sludging system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Clean water conversion kit * Required for FlowTexturing

Year of construction: 2013, Operating hours: 9,500 h, Condition: like new (used), Waterjet cutting machine FLOW Mach 4c, Cutting head DWJ-XD (+ -60 st.), Size 4000x2000mm, with 50I-S PUMP. Vtq7Ye