Used Job-Mann 101-30 Wl for sale (64,143)

Condition: used, fuel type: diesel, color: yellow, Year of construction: 2008, operating hours: 14,311 h, Year of manufacture: 2008 Field of application: Construction CE mark: yes Caterpillar 330 UHD-DL. Year: 2008. Hours: 13.211. CE machine. Central greasing system. Airconditioning. Seatheating. Hydr. Tippable cabin. Pads: 600 mm. UC: 80%. Widened UC. Normal boom with Oil quick OQ80 quick hitch. Demolition boom 21 meter working height with Oil quick OQ80 quick hitch. Nice Machine! German Machine! Deb Hlqhov Sr I Ss Neut ID NR: 100. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: ready for operation (used), Length of the folding shutters up to 3000 mm Width of the folding shutters up to 700 mm Vertical pressure adjustable up to 8000 kg Horizontal pressure 2500 kg Dueb Hlqoh Nui Noh Not

Condition: good (used), Year of construction: 2014, Functionality: fully functional, machine/vehicle number: LV1915, power: 11 kW (14.96 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: type plate available, Open Top verticale washer H1600 3-30mm Djb Hljvptp Sjqh Neut

Condition: good (used), CPU Mini Controller o.LWL 16MHz/256K RAM Nº HOMAG: 2-083-01-5071 Licht-Bus-Anschaltung 256kBFlash f.Mini Dob Hjk E Huajlqh Nsut Nº HOMAG: 2-083-01-5081 Card in working order on disassembly. No Warranty.

Condition: used, overall weight: 33,000 kg, maximum load weight: 26,920 kg, axle configuration: 3 axles, first registration: 07/1993, Year of construction: 1993, Equipment: ABS, 3-axle Kempf container chassis for 20"/30"/40" containers TYPE: SKM 34/3 VIN: 939820 Dsbov S N I Aj Hlqh Njut Chassis / Attachments: * Air suspension * 3 x BPW with drum brakes * Tires: 385/55R22.5 * Remaining tread: V~60% // M~60 // H~30% * Jost jack stands * Jost rear jack stands Body: * Container chassis for 20"/30"/40" containers Weights: * Total weight: 34,000 kg * Unladen weight: 7,080 kg * Payload: 26,920 kg Other: * German vehicle * Tipping cylinder present / not in operation ---- New general inspections / safety inspections or Weight reductions/increases are available upon request. We are happy to assist you with obtaining export/transfer license plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing and typographical errors, changes, prior sale, and errors excepted! ---- Who are we? Leible Commercial Vehicles is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Leible Commercial Vehicles' particular strength lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on our 11,000 square meter site. Our corporate philosophy is characterized by fairness and integrity. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you with organizing special transports. Day numbers / export license plates We are happy to assist you with obtaining export license plates/short-term license plates. Handling customs formalities We are happy to assist you with customs matters.

Year of construction: 2022, Condition: ready for operation (used), Functionality: fully functional, Deep-frying oil filter Vito 30, year of manufacture 2022, ideal for 1-3 deep-fat fryers up to 12 liters, the VITO 30 also filters microparticles up to 5 µm from the oil or fat, with oil tester and cellulose filter Dusb Hlqhsu Ivybo Njt

Condition: used, fuel type: diesel, color: yellow, Year of construction: 2008, operating hours: 14,311 h, Year of manufacture: 2008 Field of application: Construction CE mark: yes Caterpillar 330 UHD-DL. Year: 2008. Hours: 13.211. CE machine. Central greasing system. Airconditioning. Seatheating. Hydr. Tippable cabin. Pads: 600 mm. UC: 80%. Widened UC. Normal boom with Oil quick OQ80 quick hitch. Demolition boom 21 meter working height with Oil quick OQ80 quick hitch. Nice Machine! German Machine! ID NR: 100. Dusbov Sr H Uj Hlqh Not The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed length W-axis: 800 mm, workpiece weight (max.): 12,000 kg, worktable width: 1,800 mm, worktable length: 1,800 mm, WHQ13.8-CNC/30 ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ PRODUCTION YEAR: 1980 ■ MODERNISATION AND OVERHAUL YEAR: 2005 (RETOS) ■ REPAIR YEAR: 2025 (RETOS) ■ CONDITION: USED, EXCELLENT ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ HEIDENHAIN iTNC530 control system + handwheel ■ SIEMENS motors and drives ■ CHZ13 - tool cooling - emulsion ■ ATC60 - automatic tool changer ■ operator platform SCOPE OF REPAIR 2025 Dobjvbfxpo Hlqh Nsut ■ Cleaning ■ Revision and machine geometry adjustment ■ Revision of machine functionality ■ Revision of electrical equipment ■ Revision of hydraulic and lubrication ■ Clearance adjustment and drive optimisation ■ Replacing of guideway wipers ■ Repair of machine telescopic covers ■ Replacing of counterweight cables ■ Repair of operator platform ■ Revision of tool cooling CHZ13 ■ Revision of automatic tool changer ATC60

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, overall weight: 11,500 kg, input current: 60 A, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, BSK-60/30 RE-S: loading, float cutting and Low-e grinding (5520Kg-75.84KVA-109.6A-400V-50Hz-8bar. VB-60: Laminated glass cutting up to 12/12 with booster option (3430Kg-26,30KVA-400V-50Hz-8bar) BTS-60/30: Unloading table Duobsvc D Aij Hlqh Nst

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, punching force: 30 t, total height: 1,800 mm, total width: 2,800 mm, total length: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness (max.): 6 mm, type of input current: three-phase, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,000 mm, punching diameter: 105 mm, workpiece weight (max.): 500 kg, overall weight: 4,000 kg, table width: 1,850 mm, table length: 4,480 mm, throat depth: 1,000 mm, stroke distance: 60 mm, table load: 500 kg, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, input voltage: 400 V, Equipment: safety light barrier, Euromac CX 1000/30 CNC Punching Machine Djbev Enubo Hlqh Nout Machine Type: CNC Punching Machine Year: 2000 Control: Euromac Eurowin Condition: Very Good Available: June 2025 Includes Large Selection of Tooling 4 Station Multi Tool Light Curtains Technical Specifications Punching Pressure: 30T Max Sheet Thickness: 6mm Throat Depth: 1000mm Working Range: 2000 x 1000mm Auto Repositioning: Yes Table Size: 4480 x 1850mm Max Table Load: 500kg Max Punch Diameter: 88.9mm Positioning Speed: 5-40mm/min Max Stroke Length: 60mm Number of Strokes: 180/min Motor Power: 4kW/5HP Machine Dimensions: 4000x2800x1800mm Weight: 4000kg

Condition: excellent (used), Here we offer a LDS Cooling Fan. LDS Fan Maximum Speed: 2900 RPM. Power supply 415V 3PH 50Hz Dsb Hen Arbpelqh Nout Type: V870 50Hz Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2019, Operating hours: 392 Strokes: 23402 Year of manufacture 2019 Technical data: Pressure: 130t Bending length: 3150 mm Column width: 2600 mm Thrust: 500 mm Deb Hlqov Av Uwsh Nout Distance table / ram: 445 mm Stroke: 250 mm Speed down: 150 mm/sec Speed bending: 0-10 mm/sec Speed up: 120 mm/sec Total power requirement: 15 kW Weight, approx.: 10400 kg Space requirement, approx.: 4000 x 1800 x 2900 mm Equipment: - Segmented upper tools - Segmented die - Touch screen - Control DELEM DA-66T - Controlled back stop (2 axes)

Condition: good (used), Year of construction: 2004, For sale EUROMAC punching machine BX 1000/30 Machine in good technical condition. Type: BX 1000/90 Manufacturer: EUROMAC Year of manufacture: 2004 Control system: Fabri Win Equipment: see photo Dob Hlqsv S Drcjh Neut The machine can be tested and is ready for collection in Bratislava.

Condition: used, Technical details: pressure: 80 t Dusb Hlqsu Nfnwsh Not dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m - Press with two ram with 30 t + 80 t - foot control - documentation *

Condition: like new (used), Functionality: fully functional, power: 34 kW (46.23 HP), color: yellow, Year of construction: 2018, CAT 305.5E2 Mini-Kompaktbagger Baujahr 2018 4,068 Betriebsstunden 34kW Total-Masse 5.260kg Dujb Hlqev Rv T Njh Net Schnellwechsel Planierschild 3x Baggerschaufeln GUTER ZUSTAND Exportnettopreis 35,500.00 Euros alle Angaben ohne Gewähr/Irrtum vorbehalten

Condition: used, Year of construction: 2000, Self-driving loading station with a revolving suction cup frame With its revolving double suction cup frame, the portal loading station PKL/SBL is able to automatically and precisely de-stack large size glass sheets. Dsb Hov Ibt Nslqh Neut

Condition: excellent (used), Here we offer a BIA multifunctional cabinet. BIA Multifunctional Cabinet Temperature range +15°C to +30°C and humidity Dujb Hlqhjfktnye Njt Refrigerant: R-404A 230V 50Hz 10A Type: C890TH For you as a buyer the following information for your safety! The following points are carried out at our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), mileage: 136,636 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 2,790 mm, first registration: 01/2021, loading space length: 1,570 mm, loading space width: 1,070 mm, loading space height: 1,010 mm, fuel tank capacity: 53 l, emission class: euro6, color: white, driver cabin: day cab, tire size: 205/60R16, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, cruise control, parking sensors, power assisted steering, sliding door, soot filter, traction control, Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Drivetrain AdBlue system: Yes Transmission Transmission: 8 gears, Automatic Axle configuration Tyre size: 205/60R16 Brakes: disc brakes Suspension: coil spring suspension Dusb Hlqov Hrz Ish Net Front axle: Max. axle load: 1200 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Max. axle load: 1400 kg; Tyre profile left: 60%; Tyre profile right: 60% Measures Dimensions (LxBxH): 440 x 185 x 188 cm Weights Empty weight: 1.650 kg Carrying capacity: 730 kg GVW: 2.380 kg Functional Cooling: -30 °C to 30 °C Make of bodywork: 1210-4 STANDBY 230V Cooling engine: engine driven Wall thickness: 10 mm Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: 527146 Other information Cool unit make: TONGA Video: Very nice and neat Peugeot Partner 1.5 HDI 130 HP 8-speed automatic Year of construction 2021 Refrigerated vehicle with standby 230V (day and night cooling) Goes from -30 / +30 degrees Celsius (can both cool and heat) Air conditioning / Cruise control / PDC front and rear 136000 KM Dealer maintained Vin number: VR3EFYHZRLN527146 Technically and optically in very good condition Cool unit brand: TONGA

Year of construction: 1991, Condition: ready for operation (used), Press force: 650kN, power: 18.5kW, plunger diameter: 190mm, column passage: 150mm, installation height: 450mm, ram stroke: 150mm. Table dimensions X/Y: 450mm/800mm, table thickness: 100mm, stroke adjustment: 100mm. Machine dimensions X/Y/Z: approx. 1500mm/2550mm/3650mm, weight: approx. 3000kg. The cylinder is leaking. Documentation available. On-site viewing is possible. Dsb Hlsv I Dcyoqh Neut

Condition: good (used), All stainless steel, programmable TIpper Tie Swopper 330 bowl cutter. Direct from closed UK meat factory. Dusb Hsrak Dkolqh Nst

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) Dsbehbyr Sj Hlqh Nout i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Year of construction: 2011, Condition: excellent (used), Here we offer you CTS temperature test chamber. Control-32 bit controller LCD control panel Digital display of set and actual values Deboihb Amj Hlqh Nout Numerical input of the setpoints Error messages in plain text Interface RS 232 Free switching channels for on-site test material control Temperature tests: temperature range -30°C to +80°C temperature deviation ±0,3 K temporally Temperature change rate heating 2 K/min Cooling 1.5 K/min to -10°C Heat radiation approx. 1000 W at +20°C approx. 200 W at -25°C Data for gas supply: Temperature range: -25°C to +55°C Temperature deviation: ±0.25 K to the test space Temperature change rate measured on average at a gas flow of 10 Nm³/h: at least as fast as the test chamber Data for the gas return: Temperature range: +18°C to +30°C Temperature deviation: ±0.25 K to the test chamber Nitrogen inerting with residual oxygen monitoring With nitrogen inerting, the test chamber is first purged with the large purge volume N2 until the oxygen content is less than 3%. After that, the system switches to a base load (approx. 10% of the large flush volume). is switched over. The nitrogen flow rate of the base load is measured with a flow meter, displayed and monitored by a limit switch. and monitored by means of a limit switch. The O2 monitoring system continuously extracts from the test chamber via a flashback arrestor gas from the test chamber via a flame arrester and passes it over an O2 sensor that monitors the residual oxygen content of the extracted air. The gas is then returned to the test chamber via a second flashback arrestor. test chamber. The exhaust pump is monitored by a volumetric flow meter. Further details can be found can be found in the Dräger operating instructions in the appendix. The gas device is currently out of service! The technical data refer to an ambient temperature of +25 °C, Nominal voltage 400V , without test material, without irradiation and without additional equipment. Dimensions: Test volume 950 liters Test chamber dimensions height approx. 700 mm / width approx. 900 mm depth approx. 1500 mm External dimensions height approx. 2400 mm / width approx. 1270 mm depth approx. 3125 mm Operating data: Electrical connection 400V+6/-10 %, 3/N,50 Hz rated power 21,6 kW rated current: 36,5 A Protection class IP 54 condensate drain pressureless R 1/2" female thread Sound pressure level < 62 dB(A) (according to DIN EN ISO 3744 measured at 1m distance from front) weight: approx. 1500 kg, control cabinet approx. 300 kg external refrigeration unit refrigerant R404A / R23 Type: T-30/950 Ex/I For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), PLC type HOMATIC Duob Hlqhsd H D Ifs Net No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 2 Drilling heads for each horizontal unit (2 x Kw 1,5) No. 11 Splindles for each horizontal drilling head Max. working width (mm) 3000 Min. working width (mm) 250 No. 7 Bottom vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 7 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes

Condition: excellent (used), Weiss temperature chamber Here we offer Weiss temperature chamber. Converted to R452a Weiss temperature chamber air cooled Temperature range: from - 30°C to 180°C Temperature change rate cooling 1,6 K/min Temperature change rate heating 2,1 K/min Test chamber dimensions: Width 550 mm x depth 750 mm x height 800 mm Housing dimensions: Width 800 mm x depth 1500 mm x heights 1800 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4,9 kW Rated current 9 A Refrigerant: R452a Weight: 515 kg Type: WT1-340/30 For you as a buyer the following information for safety! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Dob Hlqhjic Rgfo Njut

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 100 Working width (min/max) mm 240 / 3000 Numerical Control /Software Power Control PC 22 Adjustable feeding speed (m/min) 10 - 50 Working line (work units support tables), adjustment by N.C. Deb Hlqhjd Nul Hs Njut SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 6,6 (NC adjustment) Hogging Units 2 x Kw 11 (KD 10 - NC adjustment) Pre-Milling unit 2 x Kw 6,6 (NC adjustment) 0°-90° EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 (PUR Glue: Option) Band Pressure zone (N.C. adjustment) "C" Edge coils supporting horizontal unit (No. 2 reels) SERVO motor edge feeding Snipping (end-cutting) unit HK 13 (2 x Kw 0,8) SERVO-motors (max 50 m/min) Rough Trimming unit 2 x Kw 0,55 + Fine Trimming unit (2 x Kw 0,4) for aluminium tape Fine Trimming unit (Multi-profile, by N.C.) MF 21 (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 23 (2 x Kw 0,4) max working speed 35 m/min (mm 100 H) Profile edge scraping unit (Multi-profile, by N.C.) MN 21 Glue scraping unit FA10 / PN20 Milling grooving unit 1 x Kw 4,5 (0°-90°) + Free space