Used Job-Mann 200-35 for sale (62,402)

Condition: used, Year of construction: 2022, operating hours: 164 h, load capacity: 3,500 kg, lifting height: 6,700 mm, free lift: 2,160 mm, mast type: triplex, power: 17 kW (23.11 HP), fork carriage width: 1,150 mm, ground clearance: 110 mm, front tire type: Trelleborg, front tire size: 315/45-12, rear tire type: Trelleborg, rear tire size: 18x7-8, total length: 4,850 mm, wheelbase: 1,800 mm, drive type: Elektro, construction width: 1,420 mm, net weight: 4,561 kg, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen - Integrierte Ablagen und Getränkehalter - Anzeige- und Bedieneinheit mit Display, Funktionstasten und Menüführung (spritzwassergeschützt) - MSG 65 Grammer Sitz mit Kunstlederbezug - Haltegriff am Schutzdach vorn und hinten - Mehrhebelbedienung - 3 festgelegte und 2 frei konfigurierbare Fahrprogramme, Energiesparmodus Blue-Q, Sprintmodus für höchste Umschlagleistung auf Knopfdruck - Anzeige des Energieverbrauchs und der verbleibenden Fahrzeit bei aktuellem Batterieladestand - Lithium-Ionen-Batterie 1:1 austauschbar - Automatische Feststellbremse - Curve Speed Control - Intelligente Sitzgurtkontrolle mit Logik-Prüfung Cjbvovdxnpjapzfegt

Condition: used, Year of construction: 2006, pressure 175 t chamfer lenght 3550 mm distance between columns 3050 mm throat 405 mm stroke 400 mm ram stroke speed 140 mm/sec working feed 10 mm/sec return speed 180 mm/sec work height max. 900 mm oil volume 350 l Control CYBELEC ModEva 10S total power requirement 25,5 kW weight of the machine ca. 13800 kg dimensions 5980 x 3590 x 3220 mm Furnishing: - DELEM CNC control DA65 Cgjbvapzswgn Dqefot - controlled axes: Y1 + Y2 + X + R - Electric crowning device WILA, controlled via CNC - Electric back stop, travel range 600 mm - hydr. Upper tool holder WILA - hydr. WILA lower tool holder - front laser protection device FIESSLER - 5x manually adjustable stop fingers, foldable - 2x front support arms “sliding system” - side + back protection device - Hand and foot controls - Operation manual ?

Condition: used, Year of construction: 2016, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 660 mm, controller manufacturer: MAZATROL, table width: 750 mm, table length: 1,740 mm, spindle speed (max.): 10,000 rpm, distance table center to spindle nose: 820 mm, CONTROLS .. CNC controls MAZATROL WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 1500 mm .. Y-axis travel: 800 mm .. Z-axis travel: 660 mm .. distance spindle nose - table surface (max.): 820 mm TABLE .. table surface (left-right): 1740 mm .. table surface (front-back): 750 mm .. workpiece load (max): 2500 kg SPINDLE / HEAD .. spindle revolutions (min): 35 /min .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 50 TOOL MAGAZINE .. number of positions: 30 .. tool diameter max.: 125 mm .. - with free neighbour positions: 210 mm .. tool length max.: 380 mm .. tool weight max.: 20 kg Cgsbvaewhlm Espzfet AUTOMATIC WORKLOAD EQUIPMENT .. number of store positions: 2 ELECTRICAL SPECIFICATIONS .. mains power supply: 74 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS .. chip conveyor: yes .. coolant unit: no .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Machine comes without coolant system but with a high-pressure pump. The magnetic plates are not included but can be purchased if you are interested.

Condition: excellent (used), RENISHAW Measuring System Package: ACR1 ⇒ Automatic changeover system for up to 8 probe modules. ACC2-2 ⇒ Communication between the CMM controller and the ACR1 changeover system. IS1-2 ⇒ Fully automated system for using multiple sensor types connected in parallel. Cgjbvapzowg Du Eefet PI7-2 ⇒ Signal processing from the TP7M strain gauge probe and standard touch probes. PI 200 ⇒ Interface for TP200 and standard touch probes. TP200 (x2) ⇒ Probe module with strain gauge technology for high accuracy. TP7M (x4) ⇒ 25 mm diameter strain gauge probe with auto-mount. + MITUTOYO ⇒ Calibration ball Ø 19.9819 mm ceramic, with M8 thread

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Csbvasd Ih H Nopzfsgt Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Condition: ready for operation (used), Year of construction: 2010, operating hours: 17,000 h, Control Unit Brand MAZATROL Model Matrix Voice Adviser Cebvewg Ic Heapzfsgt Main Drive Spindle speed range 5000 rpm Spindle motor power 22 kW Number of axis 5 Movement X-Axis Movement 580 mm Y-Axis Movement 1045 mm Z-Axis Movement 160 mm Tools Number of index 80 Type of tool holder Capto C6 Media Chip conveyor Yes Additional Equipment High-pressure cooling through the spindle, 15 bar Automatic door Robot interface 1 pc. 3-jaw chuck Kitagawa BB08 1 3-jaw chuck Kitagawa B208 This 5-axis Mazak Integer 200-IV S x 1000 turn-mill centre was manufactured in 2010. Ideal for complex machining tasks, it offers versatility and precision in both turning and milling operations. Consider the opportunity to buy this Mazak Integer 200-IV S x 1000 turn-mill centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2021, Cutting length: 3.800 mm Pusher stroke: 3.800 mm Number of grippers: 6 Feedrate max: 120 m/min Continuously variable feed: Yes Saw blade projection: 65 mm Saw blade diameter max: 320 mm Main motor power: 7,5 kW Scoring saw: Yes, Motoric adjustment Labelling: manually HOMAG PICA II 103: Yes For sensible workpieces: Clamping pressure adjustable Stop side: Right side HOLZMA Central side aligner: Yes Control: HOMAG CADMATIC 5, HOMAG POWER CONTROL Software: HOMAG tapio ready Conformity marking: CE mark Space requirement Length: 6,65 m Cgjbvjwab Tfsapzfjt Space requirement Width: 5,87 m Space requirement Height: 1,95 m

Condition: used, Year of construction: 2011, working length 2600 mm plate thickness max. 7 mm pre-bending max. 6 mm roll diam. bottom roll 200 mm bending diameter min 300 mm bending speed 5 m/min - dk engine output 5,5 kW dimensions ca. 4500 x 1350 x 1300 mm Swing-out upper beam Digital display Steel construction body (St-52) Induction-hardened rollers Bending driven by electric motor Up and down drive of the lower roll by electric motor Main motor with brake Conical bending device Movable control panel and foot pedal separate from the machine CE conformity Digital display for the rear roller Cebvapzowgfkzsfogt Good general condition, bending rollers without scoring

Condition: used, Year of construction: 2000, table width: 850 mm, table length: 1,450 mm, installation height: 420 mm, overall weight: 24,000 kg, pressing force: 200 t, ram stroke: 200 mm, lifting height: 200 mm, worktable length: 1,450 mm, tool height: 420 mm, PRESS DESIGN .. frame design: C-frame, double sided PRESS FORCES .. total force (nominal): 200 to PRESS TABLE .. table surface (left-right): 1450 mm .. table surface (front-back): 850 mm SLIDE .. slide force: 200 to .. table surface (left-right): 850 mm .. table surface (front-back): 630 mm .. stroke: 200 mm SLIDE (MECHAN. PRESS) .. slide adjustment: 110 mm .. stroke rate (min.): 30 /min .. stroke rate (max.): 55 /min Cebvapjwhf Amozfegt TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 420 mm DIMENSIONS / WEIGHTS .. total weight approx.: 24000 kg ATTACHMENTS (PRESSES) .. light barrier: yes

Condition: ready for operation (used), GMN TSE 75 cdu x 200/30000 high speed spindle, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Cjbvei Eaa Reapzfsgt

Condition: ready for operation (used), Year of construction: 2010, General Data Machine weight 2500 kg Control Unit Brand KRAUSS MAFFEI Cebvapzewg Iafofegt Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 200 N This Krauss Maffei 200-750 CX was manufactured in 2010. A hydraulic injection moulding machine, it represents a solid choice for your production needs. Consider the opportunity to buy this Krauss Maffei 200-750 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2022, Working dimension X: 3.050 mm Working dimension Y: 850 mm Working dimension Z: 56 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 4 Pickup tool changer: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Vertical working surface: Yes Machine table: Feed-through technology Special workpiece clamping system: clamp gripper Barcode reader: Yes Safety device: enclosed cabin HOMAG ecoPlus: Yes Control: HOMAG POWER CONTROL, Homag powerTouch Control cabinet cooling: Yes Cgjbvjwab Sujapzfet UPS - Uninterruptible Power Supply: Yes Software: HOMAG WOODWOP 8.0, HOMAG MMR BASIC, woodScan HOMAG Plausibility check: Yes HOMAG tapio ready: Yes Workpiece length dependent machining: Yes Conformity marking: CE mark

Condition: used, Year of construction: 2006, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 585 mm, controller manufacturer: MAZAK, controller model: MAZATROL 640 M, total height: 3,546 mm, table width: 750 mm, table length: 1,740 mm, overall weight: 13,100 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 26 W, space requirement length: 5,150 mm, space requirement width: 3,274 mm, CONTROLS .. CNC controls MAZAK MAZATROL 640 M WORKING RANGE -CUBIC- .. X-axis travel: 1500 mm .. Y-axis travel: 800 mm .. Z-axis travel: 585 mm TABLE .. table surface (left-right): 1740 mm .. table surface (front-back): 750 mm .. workpiece load (max): 1600 kg SPINDLE / HEAD .. spindle type: vertical .. spindle revolutions (max): 10000 /min .. drive power: 26 kW .. spindle torque: 529 Nm AXIS DRIVES .. rapid traverse: 18000 mm/min Cebvjwhfhceapzfegt TOOL MAGAZINE .. number of positions: 120 ELECTRICAL SPECIFICATIONS .. mains power supply: 59 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5150 mm .. space requirements -front/back-: 3274 mm .. total height: 3546 mm .. total weight approx.: 13100 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: no The system comes without a cooling system as it is connected to a central cooling system. High pressure pump is included. Tool holder SK 50 (Din 69871 A)

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-58645 L1 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Cjbvapol Eckvszfsgt

Condition: ready for operation (used), Year of construction: 2017, operating hours: 12,750 h, General Data Measurements width 2300 mm Csbvaewg Ic Tjpzfjgt Measurements depth 2600 mm Measurements height 1400 mm Machine weight 4450 kg Control Unit Brand ENGEL Model CC300 Injection Unit Screw diameter 15 mm Clamping Unit Clamping force 350 kN Opening stroke 400 mm Max open daylight 590 mm Mould height min 190 mm Size of mold platens 780 x 400 mm Ejector stroke 100 mm Ejector force for / back 20.1 kN This ENGEL insert 60V-35 single XS ecodrive Injection moulding machine was manufactured in the year 2017 in Austria and has 12750 production hours. It is equipped with an Engel CC300 control unit. The machine has a clamping force of 350 kN. 3 units are available. Application Types Injection Moulding

Condition: used, Year of construction: 2004, turning length: 850 mm, turning diameter: 600 mm, spindle speed (max.): 4,500 rpm, total height: 2,500 mm, overall weight: 11,000 kg, bar passage: 82 mm, bar diameter: 82 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, machining diameter: 600 mm, number of spindles: 2, space requirement length: 6,000 mm, space requirement width: 2,300 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK 840 D BASIC FUNCTIONS .. number of spindles: 2 .. number of x/z slides: 2 .. number of turrets: 2 .. live positions: yes .. number of c-axes: 2 WORKING RANGE TURNING .. swing diameter (max): 600 mm .. turning diameter (max): 290 mm .. bar diameter (max): 82 mm .. worpiece length max.: 850 mm MAIN SPINDLE .. spindle revolutions (max): 4500 /min .. spindle bore diameter: 65 mm .. c-axis: optional COUNTER SPINDLE .. spindle revolutions (max): 4500 /min .. c-axis: yes X/Z SLIDE .. tool fixture: Turret ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6000 mm .. space requirements -front/back-: 2300 mm .. total height: 2500 mm Cjbvapzev Uv Egsfegt .. total weight approx.: 11000 kg

Condition: new, Heidenhain ROD 260 6000 01-03 angle measuring device, . 331 881-35 , SN:10330464 , unused with signs of storage, 100% functional, scope of delivery as per photos Cebsi Eavzevapzfsgt

Condition: new, Datalogic Matrix 200 213-101 / WVGA-FAR-25P-ES Compact 2D Imager, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos Cjbji D Un Hjvapzfsgt

Condition: ready for operation (used), Seidel 66WKS-M310/35-V4 - 66WKS-M310 / 35-V4 servo amplifier 8.9 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cgjbvapei Ec R Njzfot

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-52-99546 L 3x148V 21 kVA,used, good condition, 100% functional, scope of supply acc. photos Cgebvasl Eckrepzfet

Condition: ready for operation (used), Unitek 406 TVD-200-16 / TVD6-200-16 K Compact Transistor Regulator SN:005389, used, normal signs of use, 100% functional, scope of delivery as per photos Csbvapovtivpszfjgt

Condition: ready for operation (used), Seidel 66WKS-M310/35-V4 - 66WKS-M310 / 35-V4 servo amplifier 8.9 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cgebvsi Ec R Teapzfjt

Condition: ready for operation (used), Seidel VW66WKS-CE310/35-V4 - VW66WKS-CE310 / 35-V4 servo amplifier 8.9 kVA, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Cgobvapzji Ec Tkofot

Condition: ready for operation (used), Seidel 20K-200/100-B converter SN: 52-59933 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Cobvapzel Eckyjfjgt

Condition: ready for operation (used), GMN TSE 75 cdu x 200 high speed spindle, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Cgjbei Eaa Hevapzfot