Used Job-Mann 200-35 for sale (62,401)

Condition: excellent (used), Year of construction: 2000, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Cgelrhsrrn U Tj N Hujt Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Working hours: 34.748

Condition: used, Hydraulic machine vise ARNO Jaw width: 200 mm Jaw height: 60 mm Celrjd Amwioh N Huogt Clamping force: 8 ton. Clamping range: 0 to 370 mm Opening: max 373 mm Guide rail height: 140 mm -2 socket pins adjustable clamping ranges -Swivel base Dimensions L x W x H: 900 x 400 x 210 mm Weight: 125 kg good condition

Condition: excellent (used), Year of construction: 2004, clamping force: 2 kN, screw diameter: 65 mm, BILLION 200 T injection molding machine Reference : Hercule H1300/200 Cgjlrhsu Iy D De N Hujt Year : 2004 Control type: DIXIT II Injection screw diameter: 65 mm 8 Mould heating zones 2 hydraulic cores 1 Pneumatic core 1 Blowgun

Condition: excellent (used), Functionality: fully functional, overall weight: 205 kg, Year of construction: 2008, total length: 1,200 mm, total width: 800 mm, total height: 2,000 mm, input voltage: 400 V, frequency: 60 Hz, machine/vehicle number: 10010, SOMOS Mann + Hummel blower station BGSE/M56D-S with filter. Cgolrh N Hetlwm Dsuot Year of manufacture 03/2008. Material no. 79-80-005-382. Becker vacuum pump, type SV 5 690/2 - 510, Year of manufacture 2007, Machine number 2209880. For further details see type plates. Packaging and loading included.

Condition: good (used), Good, used condition Few operating hours Cgslrh N Hjt Hxudeuot Motor: 11 kW Throughput up to a maximum of 200 kg / h Briquette: 150x60 mm

Condition: like new (used), Year of construction: 2017, Functionality: unexamined, total length: 890 mm, total width: 580 mm, total height: 352 mm, The MiR200 is an autonomous mobile robot (AMR) from Mobile Industrial Robots that is designed to transport loads of up to 200 kg. Incl. YJ LINK add-on module for circuit board magazines and charging station. Dimensions and weight: Length: 890 mm Width: 580 mm Height: 352 mm Ground clearance: 50 mm Weight (without load): 70 kg Colour: RAL 7011 Iron grey Payloads: Robot payload: 200 kg (maximum on a 5% gradient) Towing capacity: 500 kg (with MiRHook 200) Speed and performance factors: Range / maximum speed: 10 hours or 15 km Forward: 1.1 m/s (4 km/h) Backward: 0.3 m/s (1 km/h) Turning circle: 520 mm (around robot centre) Positioning accuracy: +/-50 mm to position +/-10 mm to docking mark Overcome tolerance for gaps and thresholds: 20 mm Product design lifetime: 5 Years Minimum width for corridors: 950 mm Space requirements and turning circle: Turning diameter at an obstacle/wall: Without load: 1.3 m Full load: 1.3 m (normal space requirements) Without load: 1.2 m Full load: 1.1 m (minimized space requirements) Power supply: Battery: Li-NMC, 24 V, 40 Ah External charger: Input voltage: 100-230 V AC, 50-60 Hz Output voltage: 24 V, max. 15 A Charging time: With cable: Up to 4.5 hours (0-80%: 3 hours) With charging station: Up to 3 hours (0-80%: 2 hours) Charging options: MiRCharge 24V, Cable Charger Environment: Ambient temperature range: +5 °C to +40 °C (humidity: 10-95%, not condensing) Protection class: IP20 Certifications: ESD certified, Cleanroom certified, ESD tested Noise level: 60-64 dBA (depending on floor conditions) Environment: For indoor use only Safety standards and approvals: Certifications: CE, EN1525, ANSI B56.5, ISO13849-1, EN61000-6-2 & EN61.000-6-4 Communication: WiFi: Dual band wireless (AC/G/N/B) Inputs and outputs: USB and Ethernet Bluetooth 4.0 LE: Range 10-20 m Cgslrh Nsvt Elae Huot Sensors: SICK safety laser scanner: S300 (front and rear) 360° optical protection: Around the robot 3D camera: Intel RealSense™ (detection of objects in the travel path 50-1800 mm above the ground) Ultrasonic sensors: 4 pieces Attachment module: Max. height from the ground: 1800 mm Center of gravity: Less than 900 mm above the ground

Condition: good (used), Internal article no.: 24080 Hydraulic machine vice Manufacturer: Hilma Jaw width: 200mm Max. clamping width: approx. 340mm Dimensions (LxWxH): 70x30x17cm Cjlrh N Hsuxbwgeusgt Weight: approx. 120Kg

Condition: used, Spot projection welding machine NIMAK type PMP 5 / 35 Spot welding machine, projection welding machine Make No. 88100 Year of construction approx. 1988 power at 50% ED 35 kVA throat 250 - 450 mm working stroke 40 mm electrode force 100 - 460 kp infinitely variable Electrode force at 6 bar 460 daN Operating air pressure 2 to 6 bar Electrode arm Ø 60 mm Electrode holder Ø 30 mm Insert electrodes cone MK 2 Ø 17.78 mm Arm distance 200 / 400 mm Adjustability of electrode holder 200 mm Connected load 83 KVA Mains connection 380 Volt, 50 Hz - 4-time control - stepless power adjustment Cslrh Nshubgzj Husgt - single points and series points - bouncing electrode guide - water cooled (without cooling unit) - electrical foot switch space requirement L x W x H 1200 x 650 x 1500 mm weight 300 kg good condition

Condition: refurbished (used), Year of construction: 2019, operating hours: 340 h, Functionality: fully functional, cutting length (max.): 3,400 mm, cutting width (max.): 1,400 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 155 mm, cutting height with scoring (max.): 155 mm, saw blade diameter: 450 mm, height adjustment type: electric, overall weight: 1,150 kg, extraction nozzle diameter: 120 mm, table height: 900 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 6,000 rpm, type of input current: three-phase, pivoting range: 46 °, power: 7.5 kW (10.20 HP), Equipment: motor brake, scorer, Technical data: ===== Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Saw blade retractable under table Ø 400 mm Saw blade swivel range from 0° - 46° Extraction nozzle Ø 120 mm / Ø 80 mm APA saw blade quick-clamping system Electric motor height and swivel adjustment via positioning control Double ball bearing circular saw shaft ensures absolutely smooth running Colrh N Hjvplu Heuogt Digital displays for degree setting, cutting height, speed and cutting width Push button switch with electric soft start (start/stop) Safety device can be swung away to both sides Electronic, wear-free motor brake Net weight approx. 1150 kg Extensions/additional equipment: ===== WIDTH STOP ELECTRIC MOTOR ADJUSTABLE FOR CUTTING WIDTH OF 1250 MM Dimension input on the control panel above via positioning control to 0.1 mm. Stop can be folded down in the parking position to clear a table surface. Safety cut-off bar in case of danger of crushing between width stop and trolley SWIVEL DEVICE for the cross slide including built-in length stop LENGTH STOP WITH DIGITAL DISPLAY ON EACH STOP FLAP Fully assembled, adjustable to 0.1 mm (3 digital displays) with battery operation, length max. 3300 mm THREE-PHASE MOTOR FOR THE MAIN SAW WITH 7.5 KW (10 HP) instead of 5.5 kW REMOTE LOCK WITH 50 MM GRID Blocking of the upper carriage in the loading position on the far right. This allows large panels to be easily aligned on the machine. PRE-SCORING UNIT AUTO-EPS 0.55 KW (0.75 HP) Electromotor positioning for side and height adjustment via LED display and memory function; when the pre-scoring saw is switched on, the unit automatically moves to the set position values; When switched off, the unit automatically moves under the table into a side parking position, so that saw blades larger than Ø 350 mm can be used without removing the scoring saw blades ADDITIONAL CORNER TABLE 750 X 940 MM FOR CUTTING WIDTH 1250 MM as an additional table support in addition to the standard table extension

Condition: good (used), This Fortuna type 35 bun divider rounder is suitable for dividing and forming dough pieces from 32 to 70 gram. The machine is automatic and moveable. Cgolrh N Hoh Tyf Douet

Year of construction: 1972, Condition: good (used), 23 rolls, Ø 16 mm Colrh N Hsbif Dysusgt strip width: 170 mm strip thickness: 0,2 - 1,3 mm

Condition: good (used), Wolfking SFG 850/200 Grinder Manufacturer: Wolfking Power Supply: 22 kW Head: 200 mm Hopper Capacity: 850 liter Capacity: +/- 6.000 kg/hour Cgolrh N Hjucdidsust Machine Dimensions LxWxH: 1.600x1.700x2.100 mm Machine Weight: 1.000 kg.

Condition: good (used), TECHNICAL INFORMATION: Grinding wheel dimensions (od x id x width): Ø508xØ304.8x204 mm Regulating wheel dimensions (od x id x width): Ø304.8xØ152.4x204 mm Manual plongeé Main engine power: 20 Kw Voltage: 380 V Cgolrh Nsrpnf Ro Hust Height: 1700 mm Length: 2000 mm Width: 1080 mm Weight: 4315Kg approx. machine + 60 Kg drawer

Condition: new, bending length: 3100sheet thickness: 35upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox Cgslrh Njd Ab Sts Hujt - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table  - oil coiler STD. - center support EURO 13.600,-- - side supports EURO 12.000,-- We have many references!

Condition: excellent (used), Vötsch Climate control cabinet VMT 07/35 -70 to + 180°C Cslohcm Rzjrh N Husgt

Year of construction: 2005, Condition: good (used), Demag Injection Moulding Machine Type: 200/580-840 Extra with robot Control: NC 4 Year: 2005 Clamping unit Clamping force t: 200 Opening stroke mm: 575 Distance between tie bars mm: 580x580 Installation height min/max mm: 340/690 Mould fixing platen size h x v: 860x860 Injection unit Screw size mm: 50 Injection shot weight in Polysterol gr: 400 Cjlrhjlpad Se N Husgt Injection volume cm³: 442 Injection pressure increased bar: 1946 Size and weight Dimension HxWxD m: 5.4x1.7x2.1 Total weight Kg: 8200 Additional information Robot Kerzüge 1

Year of construction: 1979, Condition: used, pressure 160 t distance between columns 850 mm stroke 400 mm ram surface 800x700 mm 300 mm pressure of ejector 20 t table surface area 800x700 mm Cgolrjlp Uz Roh N Huot total power requirement kW weight of the machine ca. 12 t dimensions of the machine ca. 1800x1800x4200 m

Year of construction: 1978, Condition: excellent (used), I sell the top router for copy milling Žičnica FPŽX 300/200, Made in Jugoslavia in Ljubljana, Slovenia. Colrh Nod Nzfcs Hujgt

Year of construction: 1987, Condition: good (used), Temperature chamber Temperature range: -70°C to +180°C Temperature change heating: 5.3 K / min Speed after cooling: 4.7 K / min Temperature deviation temporally in the middle of useful space: ±0.2K to ±0.5K Temperature homogeneity spatially related to setpoint: ±0.5K to ±1.5K Heat compensation: at +20°C approx. 350 W Power (kW): 1.5 / A 7.5 Sound pressure level: Approx. 55 dB (A) Cgjlrehtrq Tsh N Hujt Electric: Nominal voltage: 1 / N / PE AC230 V +/- 10% 50Hz Nominal output: Approx. 0.9 kW Nominal current: Approx. 6.0 A

Condition: new, sheet thickness: 33sheet length: 3100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) Cgslrh Ned Ab Rls Huet - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.400,-- - oil coiler    STD. - center support EURO 13.600,-- - side supports EURO 12.000,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: like new (used), Year of construction: 2004, machine/vehicle number: SN:N7383, For sale is a Nicholson A2/35" 5 arm air bellows (890mm). Cjlrh N Hjvmqpksuegt The machine is being sold completely overhauled and repainted. If you are interested, please contact us for further information.

Condition: excellent (used), Functionality: fully functional, Passing grinder OLIMPIA 200 with extraction Specifications: - condition - used - manufacturer - OLIMPIA - model - 200 - main motor 3.0 kW - max working width 200 mm - symmetrical tops with dimensions of 24 x 55 cm each - mechanical belt tensioning and oscillation - 1 sanding unit with viscera - built-in sawdust extraction - both tops adjustable - adjustable culageway at an angle of 12 x 60 cm - extraction stub - fi 80 mm - weight - about 250 kg - overall dimensions - 125 x 75 x 95 cm ( W x L x H ) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site. Colrh N Hsvgm T Seujgt - the price given in the auction does not include VAT

Condition: new, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: M100017546, rotational speed (min.): 1,490 rpm, rotational speed (max.): 1,500 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 770 A, type of input current: three-phase, overall weight: 2,500 kg, type of cooling: air, protection type (IP code): IP55, shaft diameter: 120 mm, 450 kW 355X B3 SCHORCH electric motor for KLEEMANN and other crushers. Motor unused, stored as a spare. After inspection for electrical measurements and test run. Crusher motor - reinforced. Large diameter shaft - 120mm and used large cylindrical roller bearing for radial loads. Cjlrhevaiulo N Husgt Electric motor for crusher, crusher motor - reinforced.

Year of construction: 2006, Condition: new, I sell 12 sets of new saw blades suitable for HOLZMA panel beam saw machines. Main saw blade FABA 600 x 5,8 / 4,0 x 60 Z 72 Cslrheg Dvutj N Huegt Scoring saw blade AKE 26 200 45H 200 x 4,8 - 5,8 x 45 Z=36 Price totally 1000 Euro. Available immediately.

Condition: new, Year of construction: 2014, Functionality: fully functional, machine/vehicle number: 20261401/1, rotational speed (min.): 1,488 rpm, rotational speed (max.): 1,500 rpm, input voltage: 400 V, input frequency: 50 Hz, input current: 540 A, type of input current: three-phase, overall weight: 1,600 kg, type of cooling: air, protection type (IP code): IP55, shaft diameter: 125 mm, 315 kW 355M B3 WIRTGEN GROUP (SCHORCH) electric motor for KLEEMANN and other crushers. Motor unused, stored as a spare. After inspection for electrical measurements and test run. Crusher motor - reinforced. Large diameter shaft - 125mm and used large cylindrical roller bearing for radial loads. Cgelovaipiorh N Hujt Electric motor for crusher, crusher motor - reinforced.