Used Gesan Dps 60 for sale (53,837)

Year of construction: 2003, operating hours: 6,724 h, Condition: used, Functionality: fully functional, fuel type: diesel, lifting height: 3,550 mm, mast type: standard, construction height: 2,720 mm, drive type: Diesel, load capacity: 6,000 kg, Diesel forklift truck ISO class: ISO class 4 = 5,000 - 10,000 kg Duslimeu Rixvs U N Uot Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Heating, full cabin,

Condition: good (used), Year of construction: 2013, Functionality: fully functional, cooling capacity: 60.1 kW (81.71 HP), type of cooling: air, overall weight: 524 kg, total width: 1,010 mm, total length: 2,100 mm, total height: 1,600 mm, warranty duration: 6 months, Aircooled chiller YORK YLCA-60 60,1 kW Cooling capacity: 60,1 kW / 17,1 tons (12/7 — 35°C) Year of manufacture: 2013 Dolim U Novnmbxj Usut Refrigerant circuit: 1 pcs. Type of refrigerant: R410A Compressors: 2 pcs Copeland (scroll) Heat exchanger: Plate Hydraulic module: 1 pc. water pump (Wilo), buffer tank, expansion vessel Dimensions: 2,10 x 1,01 x 1,6 m Weight: 524 kg Condition: Good

Condition: excellent (used), fuel type: diesel, color: yellow, overall weight: 6,250 kg, maximum load weight: 2,500 kg, Year of construction: 2015, operating hours: 3,662 h, Equipment: all wheel drive, cabin, JCB 525-60 telehandler 2015 Extension 6 meters / lifting capacity 2500 kg Joystick Djlsulh Ukeim U N Usut Four swivel wheels 4x4 drive Work lights Hydraulic outlets Brought to you by The information included in the ad is for informational purposes only. Do not constitute an offer within the meaning of the Civil Code, referred to in Article 4 of the Act of 27. 07. 2002 on the special conditions of consumer sales. Agreeing on the terms, price, accessories, specifications takes place at the sale of machines. To confirm the availability of the offered machines, please contact us by phone.

Condition: used, total height: 200 mm, total width: 600 mm, total length: 800 mm, load capacity: 500 kg, 20,000 Trolleys 80 x 60 cm, 500 kg load capacity Used goods, good condition, see pictures Load capacity: 500 kg Own weight: 7.7 kg Length: 80 cm Width: 60 cm Height: 20 cm 2 fixed and 2 swivel castors Castor diameter 125mm Color black Material PP Dimensionally stable and robust Can be stacked on top of each other Doljtymgpoim U N Uout Negotiated price: € 12.00 net from stock Sales price: € 10.00 net from stock for orders of at least 100 pieces Sales price: € 9.00 net from stock for purchase of one truck (924 units) Also available 1500 roll pallets 120 x 80 cm! (Link) Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: new, Year of construction: 2023, Functionality: fully functional, motor manufacturer: FPT, frequency: 50 Hz, Manufacturer: PRAMAC Sound pressure level at 7m dB(A) : 64 Continuous power: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: FPT IVECO F 34 TCA Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 3400 cm³ Intake: Turbo/NK Speed: 1500 rpm Starter: 12V Engine control: Electronic Exhaust gas recirculation, particulate filter, catalytic converter, Djlimotq Hcco U N Ueut Consumption 3/4 load: 8.32 liters Consumption at full load: 13.99 liters Generator: MeccAlte ECP32-2M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) DEEP SEA ACP Digital control DGUV TYPE B Higher-level insulation monitor Sockets with Fi type B 1x 63A 400V /5P 1x 32A 400V /5P 1x 16A 400V /5P 1x Schuko Dimensions and weight: Length: 2,400 mm Width: 1,040 mm Height: 1,745 mm Weight, dry: 1,250 kg Fuel tank: 209 liters Sound insulation hood: RAL 9016 white Main battery switch Oil drip tray Fuel three-way valve WSP water-separating diesel filter Document holder Galvanized base frame with forklift pockets

Condition: good (used), mileage: 265,000 km, Year of construction: 2015, Equipment: tail-lift, 2 axle 60ptt truck, set up with 4.45x2.25m body with rib, usable interior height 2.20m, roof cover and uncover, payload capacity 2000kg, 1000kg Dhollandia retractable tail lift, manual transmission, euro 5/B regulations. N.B. Please note that the vehicle description is to be considered indicative and may contain errors or inaccuracies. We therefore invite you to contact us to verify the exact correspondence of the data. Duelim Uoru D I Te N Uot

Condition: ready for operation (used), Year of construction: 1999, Engel ES 200/60HL ST Closing 60 TO Year 1999 Deliovlangem U N Ueut Scrow 30 mm Enlarged clamping plate 660x560

Condition: ready for operation (used), Refrigerant compressors system Bitzer Type: HSK 6461-60-40P (x3) Volume: 165 m3/h (x3) Cooling capacity for R404A: 426 kW at 0°C/40°C, 351 kW at -5°C/40°C, 287 kW at -10°C/40°C, 185 kW at -20°C/40°C Dimensions: 3550 x 1050 x 1880 mm Refrigerant tank in set Delijtqcqaom U N Ujut Items in magazine: 2 Reference number: Z77 Condition: Used in good condition

Condition: new, Functionality: fully functional, Kuka MG-12-58-60 Servo Motor. Dslim U Njturvre Ueut Model MG-12-58-60 Speed 6000 min Io 1.7 A Mo 1.17 Nm Un 600 VDC Pn 0.58 kW IP40 Good working condition. Please check out our other listings as well.

Condition: good (used), 20,000 Trolleys 80 x 60 cm, 500 kg load capacity Used goods, good condition, see pictures Load capacity: 500 kg Own weight: 7.7 kg Length: 80 cm Width: 60 cm Height: 22 cm 2 fixed and 2 swivel castors Color black Material PP Dimensionally stable and robust Can be stacked on top of each other Negotiated price: € 17.50 net from stock Sales price: € 13.50 net from stock for orders of at least 100 pieces Selling price: € 9.80 net from stock for purchase of one truck (924 units) Goods are in stock. Transportation and assembly possible on request. Inspection possible at any time by appointment. Further information on request. Duolimstxztbe U N Uot Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: as good as new (ex-display), Functionality: fully functional, BASIC FEATURES: Base and desk * steel structure with electric cabinet on the front of the machine * introduction to sanding belts on the left side of the machine * electrical adjustment of working thickness * main engine located inside the base ----- TECHNICAL DATA: 110 Version Working width mm 1,100 min./max. piece thickness mm 4-170 Sanding belt width mm 1,115 Length of sanding belt mm 2,150 Main engine power kW (HP) 11 (15) Conveyor belt motor power kW (HP) 0.45/0.8 (0.6/1.1) Conveyor belt speed m/min 4.5/9 ----- The price of the machine does not include: - Transportation - Unloading Doljqw Uz Ieim U N Uout - Assembly - Training - Processing tools - VAT

Condition: used, Year of construction: 1982, Technical details: honing diameter: 30-180 mm stroke: 600 mm throat: 370 mm Verticval Honingmachine - machined Cyliner Liner - out of OEM Line. Duslimorpcbmo U N Ujt *

Condition: new, Functionality: fully functional, fuel type: diesel, Year of construction: 2025, Hydraulic drilling rig for drilling water wells, geophysical survey, and injection wells up to 200 m deep. Powerful, compact rig to solve serious problems! Any configuration is possible based on your drilling aim and budget. _____ ✅ TITAN series - self-propelled, on a tracked platform; ____ Dslevfcwkoim U N Usut 👉🏻The hydraulic drilling rig is used for drilling water wells up to 200 m deep, including inclined, geological surveys, drilling holes for installing fences, foundations, engineering surveys, screwing piles, carrying out construction work. The drilling rig is equipped with a drilling mud supply unit for flushing or compressed air supply for purging and air hammer operation. The installation is easily controlled using a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool. The installation can be equipped with - remote control panel; - hydraulic auxiliary winch; - hydraulic outriggers; - drilling pump; - casing table; - a descent/ascent overcoming system with an angle of up to 45 degrees (for the TITAN series on a tracked platform) _____ Specifications: 📌 OPERATING Max. initial diameter, mm - 300 Max drilling depth, m - 200 Dimensions, mm: - Length 4500 - Width 1600 - Height 2200 Mass, kg - 1800 📌 SWIVEL Type - Hydraulic oil motor with mounting group Rotative moment, (Нм) - 2000 (optionally till 4000) Rotation speed, (sev/min) - I gear 0-330 / II gear 0-165 MAST Pulling force, (kg) - up: 5000 / down: 2000 Carriage movement, (mm) - 1680, 2200 Speed, m/sec - 0,43; 0,42 📌HIGH-PRESSURE PUMP STATION Type - Diesel Power, 60 hp 📌 CHASSIS Type of crawlers - rubber-metal Width of crawler, mm - 260 Speed, km/h - 6 📌OPTION MODULE • Hydroclamp of drilling pipe optionally • Hydroclamp of casing pipe optionally • Hydraulic casing oscillator optionally • Mechanical outriggers optionally • Hydraulic outriggers optionally • Wrench optionally • Anchoring system optionally

Condition: ready for operation (used), Bitzer compressors unit Delim Ueinbn Uo N Usut Type: 2 x HSK 6461-60, 2 x HSK 7451-70 Volume: 2 x 165 m3/h, 2 x 192 m3/h Cooling capacity: 620 kW at 0°C/40°C, 520 kW at -5°C/40°C, 420 kW at -10°C/40°C Refrigerant: R404A Dimensions: 4300 x 1200 x 1500 mm Pieces in stock: 1 Reference number: Z39 Condition: Used in good condition We have a lot of refrigeration equipment. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: good (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 191514, TRSI 5500E ⌀500 + HM500-35-120 CALS 1300x5 + TC60 5000x350/2 E60 Crosscutting saw with integrated pusher for defect optimization TRSI 5500E CNC cross-cutting saw with defect reading and cutting optimizer for boards with a maximum weight of 70 kg. Optimization between defects is performed after the entire board has been read. A total of 128 cutting lists (16 widths and 8 qualities) can be programmed. Lists can work together and with independent parameters configured for each of them. The operator can prioritize the length, quantity or size of the workpieces. Two types of optimization are available: constant or alternating. Centering the cut piece among defects allows for higher quality by splitting the waste part. The worklist can be automatically changed if the combination of measures calculated on the board does not meet the set waste limits. Optimization simulator with or without a board (virtual simulation). Defects are detected using a camera that reads a luminescent mark made with a special chalk. The boards must not be wet. Pusher speed: programmable from 10 to 200 m/min using a brushless servo motor. Feed direction of the pusher is from right to left on a linear guide (rolling recirculation system) with a lubrication device. Pneumatic upward lifting of the pusher during the reverse stroke: 150 mm. Working stroke of the pusher from 500 to 3650 mm. Positioning accuracy of the pusher ± 0.3 mm/m. Boards must be straight with a constant width. The thickness of the boards must be constant. Automatic cutting control is controlled by a computer. Vertical alternating blade movement: pneumatic system with fully controlled stroke. HP 5.5 blade motor with automatic brake (optional HP 7.5). Cutting time: adjustable from 0.3 to 2 seconds. Minimum thickness of boards: 4 mm. Mowing height on the guide: 120 mm. Board width: minimum 40 - maximum 250 (300) mm. Supports for marking boards. Full protection and safety of the I.R. (infrared) optical barrier on the loading side. BLADE HM 500-35-120 Blade made of HM steel with alternating teeth (Widia). Dimensions: Ø 500 mm, aperture Ø 35 mm - Z=120. Tensioned, balanced and quiet for operation at a peripheral speed of 85 m/s. An optional side aligner is mounted under the blade guard after the blade to improve the straightness of the cuts. Duslisvgw Ugsm U N Ust CALS 1300 X 5 HORIZONTAL FEEDER BELTS WITH SEPARATOR Set of 5 motorized belts (5/8 pitch - 0.5 hp motor) for feeding and aligning edged boards (single or in packages) on the guide rails. SORTING BELT WITH CNC MOD. TC 60 5000X350 / 2 E60 COMPLETE WITH 2 EJECTORS

Condition: used, 60 running meters of Bito P5 pallet racking Used goods in very good condition, see pictures. Height 4,5 m Delim U Njtucp Nj Uout depth 110 cm, galvanized Field load 16000kg Beam length 3.6 m blue Beam with load / compartment 4000 kg Negotiated price: € 3.950,-- net ex stock Offer consists of: + 17 pre-assembled frames, depth 110 cm, height 4.5 m + 64 beams, length 3.6 m, 4000 kg load per compartment +128 pcs. suspension locks + 68 concrete anchors Used corner protectors available immediately, surcharge per piece 15,- € net! Further accessories such as clamping plates, inlay grids etc. on request. Load-bearing plates, documents etc. are a matter of course. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: S80001419, Excellent condition paper press DIXI 60S made in Germany only one left, the price does not include transportation or any extra costs. Duoljvd A Uaeim U N Ujt

Year of construction: 2013, Condition: used, Functionality: fully functional, machine/vehicle number: 270769-02-01, Technical Specifications: Brand:GWK Model: TECO CW 60 Year of Construction: 2013 Serial Number: 270769-02-01 Operation-Voltage: 400-415/24V/50Hz Rated Current/Max: 15.3A/25A Electrical Connection Power: 5.7kW Cooling Capacity: 10kW Delim Ust Tdxho N Ujut Max Circulating Temperature: 25°C Condition: Used, Currently out of operation Available Documentation: Technical Specifications Circuit Diagram

Condition: new, Functionality: fully functional, fuel type: diesel, Year of construction: 2025, Hydraulic drilling rig for drilling water wells, geophysical survey, and injection wells up to 200 m deep. Powerful, compact rig to solve serious problems! Any configuration is possible based on your drilling aim and budget. _____ ✅ TRAILER series - mounted on a single-axle or two-axle trailer. _____ 👉🏻The hydraulic drilling rig is used for drilling water wells up to 200 m deep, including inclined, geological surveys, drilling holes for installing fences, foundations, engineering surveys, screwing piles, carrying out construction work. The drilling rig is equipped with a drilling mud supply unit for flushing or compressed air supply for purging and air hammer operation. The drilling rig is easily controlled using a 2-flow hydraulic system, which allows you to independently adjust the force on the face and rotation of the tool. The installation can be equipped with - hydraulic auxiliary winch; - hydraulic outriggers; - drilling pump; - casing table. _____ Specifications: 📌 OPERATING Max. initial diameter, mm - 300 Max drilling depth, m - 200 Dimensions, mm: - Length 3700 - Width 1350 - Height 1800 Mass, kg - 1700 📌 SWIVEL Type - Hydraulic oil motor with mounting group Rotative moment, (Нм) - 2000 (optionally till 4000) Rotation speed, (sev/min) - I gear 0-330 / II gear 0-165 MAST Pulling force, (kg) - up: 5000 / down: 2000 Carriage movement, (mm) - 1680, 2200 Speed, m/sec - 0,43; 0,42 Dujlim Usvr S Dts N Ust 📌HIGH-PRESSURE PUMP STATION Type - Diesel Power, 60 hp 📌 CHASSIS Truck (trailer) Width of crawler, mm - 260 Speed, km/h - 6 📌OPTION MODULE • Hydroclamp of drilling pipe optionally • Hydroclamp of casing pipe optionally • Hydraulic casing oscillator optionally • Mechanical outriggers optionally • Hydraulic outriggers optionally • Wrench optionally • Anchoring system optionally

Condition: excellent (used), Year of construction: 2014, operating hours: 25,553 h, Functionality: fully functional, machine/vehicle number: M14 20780, total width: 2,680 mm, total length: 2,120 mm, total height: 2,420 mm, spindle speed (min.): 200 rpm, spindle speed (max.): 1,200 rpm, overall weight: 6,500 kg, rotational speed (max.): 1,200 rpm, rotational speed (min.): 200 rpm, grinding diameter: 200 mm, grinding spindle motor power: 15 W, feed length X-axis: 740 mm, feed length Y-axis: 250 mm, feed length Z-axis: 740 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, power: 15 kW (20.39 HP), Our machine is actively working. Djlimsuxnrwj U N Uout

Year of construction: 2024, Condition: new, Functionality: fully functional, The Crushing System consists of 3 main machines and their equipment. The fact that all machines and equipment are on a chassis facilitates the use and control of the plant. The enclosure case around the chassis eliminates all possible hazards. The rotor is driven by V-belts and manually fed with a conveyor belt; the cooling process in the crushing chamber is carried out by the machine itself with a pneumatic fan system. Dujlstuugteim U N Uot All of the blades in the crushing chamber are 2379 Bohler brand and have bidirectional sharpening feature.

Condition: like new (used), 60 running meters tire rack Nedcon New & used, see pictures. Height 3 m Depth 50 cm Beam length 3.7 m Beam with load/shelf 1000 kg Frame blue Beam painted blue Negotiable price: € 5.250,-- net ex stock Dslsi Hl T Ieim U N Uout Offer consists of: + 16 pcs. frames pre-assembled, depth 50 cm, height 3 m + 90 pcs. beams, length 3,7 m, 1000 kg load/slot + 180 pcs. suspension locks + 64 pcs. concrete anchors Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: ready for operation (used), passage width: 1,000 mm, load capacity: 6,000,000 kg, Ideal for automotive parts, deepdraw parts in limited numbers: simple tooling automatic feed in out table 2 hydraulic cilinders each with a diameter of 1000 mm used as rubber die press, but can also be used for various other deformation processes max workpiece height: 250 mm Dolim Uowhr A Te N Ueut Gummikissenziehpresse - Presse à caoutchouc - Elasto forming presx - Elastomer press Dimensions of the table: 3000 x 800 mm

Condition: used, Stacking Crate 6422 - Used Delim U Nswg Ex Es Usut Manufacturer: Stucki Color: Green Material: Polypropylene Closed handle External dimensions: 600x400x220 mm (LxWxH) Inner dimensions: approx. 564x366x202 mm (LxWxH) Volume: 42 liters Load capacity: max. 30 kg Base with drainage holes

Condition: ready for operation (used), passage width: 4,200 mm, net weight: 40,000 kg, This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Has been fully reconditionned Cap: 600 Ton Max opening: 1600 mm stroke: 600 mm Table: 2000 x 1000 mm Between coloms: 4200 mm Closing speed: 55 mm/sec working speed: 10 mm/sec return speed: 130 mm/sec plate roll press - plate roller press - Plattenroll Presse - strechting - bending - joggling - flanging - Kesselboden - Fond elliptique / Fonds elliptiques / Dish-end forming press / Tankbödenherstellung / Kümpelpressen / Bördelmaschinen / Bodenrand-Sickenmaschinen Capacity: 600 Ton Max ram adjustment: 600 mm Drawningspeed: 55 mm/sec Workingspeed: 5 à 10 mm/sec Duslimjwhr Dqj U N Uet Returningspeed: 130 mm/sec Max distance between table - ram: 1600 mm Dimensions of the table: 2000 x 1000 mm Electric motor (power): 45 pk