Used Isal Pb115 E for sale (5,968)

Condition: ready for operation (used), Siemens 6FM1706-3AA20 positioning/counting module WF706 E-Stand A / 3 SN11270 ,used, normal traces of use, 100% functional, scope of delivery according to photos Feln Ewtei I I D Eogopg

Condition: used, Electric dual screwdriving unit with automatic feed and pneumatic double stroke mounted on handling device, handling system, manipulator for screwdriving technology Screwdriving unit: BÖLLHOFF / BOSCH REXROTH type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E double screwdriving unit has a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are also fitted for complete automation. Screwdriver 1 consists of the following components: Rexroth type servomotor Rexroth type planetary gearbox Rexroth type encoder Rexroth type straight drive Screwdriver 2 consists of the following components: Rexroth type servo motor Rexroth type planetary gear Rexroth type Transducer Rexroth type Offset output Dimensions WxHxD: 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Screws last used: M6 x 15 mm Rexroth electric screwdriver unit Rexroth servo motor Type: EC302 SZ3 Material number: Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20000 rpm Current consumption: max. 7 A Weight: 0.8 kg Fpoln Ewtsfx Hyfogjg Rexroth gear unit Type: 3GE27 SZ3 Material no: Efficiency: 90% Reduction ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Transducer Rexroth Type: 2DMC012 SZ2 Material no: Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Rexroth straight drive Type: 2GA82 SZ2 1/4 "SQ Material no: Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4 "SQ Material no: Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Reduction ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex outreach: 250 to 650 mm Outreach Handyflex swung out: max. 860 mm Rotation radius at full extension: max. 360° Vertical guide column: Ø 30 mm Horizontal guide pillars: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions L x W x H: approx. 1150 x 650 x 1400 mm total weight: approx. 90 kg good condition Blue steel base plate is not included in the scope of delivery.

Condition: used, Year of construction: 2003, Total Permissable Mass: 17600kg Permissable Front Axle Load: 9000kg Folnjuf Hd Nj Ewtgjpg Permissable Rear Axle Load: 9800kg Engine Power :112kw Plough: Included

Condition: ready for operation (used), Technical characteristics Table width: 1200 mm Table depth : 800 mm Shaft diameter : 50 mm 4 rotation speeds : 3000, 4500, 6000 and 9000 RPM Pivoting micrometric guide Spindle clearance under table Foot brake Fjln Eotvc Akswtgjpg Foot-operated spindle lock One-piece cast-iron frame Power and Motors Voltage: 380 V Pluging: Three-phased Motor: 5.5 CV Overall dimensions

Condition: used, Year of construction: 2022, faceplate diameter 2.000 mm swing diameter 2.500 mm turning height 2.000 mm Control Fanuc 32i-A max. Torque 40.403 Nm cutting capacity max. 3.000 kgf max. workpiece weight 12.000 kg table: table diameter 2.000 mm table speeds 1,0 - 200 1/min power capacity - table 45/55 kW C - Axis: resolution 0,001 ° Working speed 0 - 900 °/min max. table speed 2,5 1/min turret slide: Shank diameter 32 mm spindle cone ISO 7/24 / No.50 Spindlespeed 30 - 3.000 min/-1 power capacity - Tool Spindle 18,5 / 22 kW max. Torque 280 Nm ram cross section 240 mm axis stroke: x-axis 1.500 mm z-axis 1.500 mm cross rail adjustment 1.000 mm Tool-Presetter: tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 50,0 kg draw bolt DIN 69872.50 feeds: rapid feed (X / Z) 10,0 m/min feed speeds max. 10.000 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 150 kVA Fpeln Ejttwmcswtgsg weight of the machine ca. 45,0 t dimensions of the machine ca. 9,00 x 7,00 x 8,00 m CNC - Vertical Turret Lathe HANKOOK - VTC 200 E - IMMEDIATELY available ex stock DE ! - price delivered, installed Germany / Europe

Condition: used, Planing and moulding machine Weinig Unimat 22E for four-sided planing and profiling of wood with groove bed for short and curved workpieces, mobile spindle for falling widths, a set of processing tools and a long planing table. spindles: 6 spindle 1: Bottom (5.5 kW) spindle 2: Right (4 kW) spindle 3: Links (5.5 kW) spindle 4: Right (5.5 kW) Felnovdu Hho Ewtgopg spindle 5: Top (7.5 kW) spindle 6: Bottom (4 kW) Spindle speed: 6,000 rpm spindle diameter: 40 mm working width: 220 mm working height: 120 mm mobile spindle: Yes groove bed: Yes feed: 5.5 kW / / 6-36 m/min

Condition: new, Siemens 6ES5941-7UB11 central module E Stand 5 ,unused in original packaging, 100% functional, scope of delivery according to photos Fpoln Ewsi Edrdetgeg

Condition: used, High lift pallet truck, pedestrian stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Wide-track pallet truck Series. Year of construction 2014 Rated load capacity pedestrian stacker 1000 kg Load capacity special construction device GIESLER 200 kg Nominal lift height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Underride height of wheel arms 130 mm Operating voltage hydraulic unit 12 Volt Overall height 2160 mm Overall length 1650 mm Overall width 1860 / 1200 mm - Manual driving mode - Electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between the wheel arms) - 1 12 volt battery - separate charger 12 Volt, 15 Ampere - Steel fork carriage on the mast - Fork carriage special construction device GIESLER, load capacity 200 kg Feln Ewtshxvuwegopg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Stainless steel forks, complete length 770 mm to swivel plate - Forks cannot be lowered to the ground due to special construction device (approx. 170 to 250 mm depending on track width) Dead weight 485 kg as good as new condition

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 12,000 mm, turning diameter over bed slide: 900 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, rotational speed (max.): 900 rpm, TECHNICAL DETAILS Speed range: 1 - 900 rpm Gear stage 1 speed range: 1 - 230 rpm Gear stage 2 speed range: 4 - 900 rpm Tool turret: 12-way with driven tools (Sauter) Holder: VDI50 Processing data Max. workpiece weight: 6,000 kg Bed width: 600 mm Turning length: 12,000 mm Turning diameter over bed: 900 mm Swing diameter over face slide: 530 mm Face slide displacement: 590 mm Tailstock quill diameter: 140 mm Tailstock quill stroke: 300 mm Tailstock inner taper: 171 metric type Lathe tool dimensions: 40 x 40 mm Feed rate X / Z: 20,000 mm/min Rapid traverse speed: 10 rpm Max. torque: 8,000 Nm Spindle bore: 165 mm Spindle head according to DIN 55027: size 15 Front bearing diameter: 235 mm MACHINE DETAILS Length: 15,000 mm Width: 2,600 mm Height: 2,150 mm Fpslsvxin Njn Ewtgog EQUIPMENT - Power chuck SWM, KNCS-N 500 with quick jaw change - Tailstock, quill Ø140, MK6, electrically movable, hydraulically clamped - Various clamping jaws, tool holders and driven tools - 2 hydraulic SMW steady rests SR5, Ø45-310 mm - 1 small steady rest - 1 large steady rest up to Ø510 mm - 1 revolving steady rest - 1 boring bar holder Ø150 x 600 mm - chip conveyor - preparation for extraction

Condition: ready for operation (used), Technical characteristics Capacity : 230 x 120 mm Max. tool Ø 200 mm 5 shafts ATS control Composition : Fpoln Ewtsqxm S Sjgjg Lower planer 5.5 kW, bore 40 mm Right-hand spindle moulder 5.5 kW, 40 mm bore Left-hand spindle moulder 5.5 kW, 40 mm bore Top planer 5.5 kW, 40 mm bore Lower planer 5.5 kW, 40 mm bore Feeding speed : 5-35 m/min Infeed table length : 2000 mm Roller in table Pneumatic pressure Automatic table lubrication Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t Fpelotqmm Aen Ewtgjg dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: new, Year of construction: 2025, Angle Bar Bender manual Model 100 E German quality Capacity cold (St 37): steel up to 100x6 mm solid round 18 mm with length stop Feln Ewsfhdfvjtgopg with 2 Radius-toolings weight around 27 kg

Condition: ready for operation (used), HOLZ-HER / ELTE PE5.14 / 2 motor spindle SN:27.95 + Heuco PS 2000-E , the interference suppression capacitor is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos Fpolnjrrqrrj Ewtgog

Condition: used, Route trolley with 4 pieces Liftrunner- Route trolley STILL transport trolley, platform trolley Device type: Liftrunner Device designation: E-frame Unit number: 5T 0501 A 00046 Load capacity: max. 600 kg inner frame size: 1980 x 1050 mm Platform size to center brace: 890 x 1050 mm platform height bottom: ca.220 mm Platform height top: approx. 260 mm Total length per trolley without drawbar: 2250 mm Total width: 1170 mm Fpelnsmxrv Ss Ewtgog Total height: 260 mm (frame height without superstructures) - Route train consisting of 4 pieces Liftrunner route trolleys - each trolley has 2 platforms of approx. 890 x 1050 mm - 2 pieces hydraulic quick couplers per trolley - 2 single-acting hydraulic cylinders above the axle for lifting the superstructure - Vulkollan wheels Ø 140 x 55 mm - same track from the first to the last trolley through central axle - hydraulic lifting device, WITHOUT hydraulic power unit (hydraulic supply from towing vehicle) - without hydraulic hoses - without drawbar - Former use with half pallet roller (not included) Weight per trolley: 325 kg Transport dimensions in transport rack L x W x H: 2250 x 1200 x 1350 mm Complete weight 4 trolleys with stanchion frame: 1400 kg

Condition: used, mileage: 162,400 km, power: 302 kW (410.61 HP), first registration: 01/2010, overall weight: 31,000 kg, fuel type: diesel, color: orange, axle configuration: 3 axles, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, all wheel drive, parking heater, · ??Liebe Interessenten, ?? gerne können Sie uns über WhatsApp kontaktieren: ???. Für Anfragen außerhalb von Deutschland nutzen Sie bitte die internationale Rufnummer: · ? 6569??. Wir freuen uns auf Ihre Nachricht * LKW Iveco Trakker 410 E 5 * 6x4/2 Liftachse / Lenkachse * Winterdienstfahrzeug * Schloegl Winterdiensthydraulik * Anbauplatte vorne * Hydr Schnellwechsel vorne * Bedienpult im Fahrerhaus * Zusatzbeleuchtung * Anbauplatte seitlich * Hydr Schnellwechsel seitlich * Bedienpult im Fahrerhaus * Salzstreuerhydraulik * Kranhydraulikanschluss hinten * Radstand 3800 mm * Euro5 Fsln Esucmr Ujwtgspg * automatik Getriebe * Federung: Blatt/Luft/Luft * 2x Rundumlicht * Sonnenblende * Staubox * Duomatik, DL- Anschlüsse, AHK * AD Blue * Rückfahrcamera * Standheizung * Luftsitz * Multifunktionslenkrad * Differenzialsperren / Allrad * heizbare Frontscheibe * Radio CD , Dachluke, el FH , Spiegelheizung * Meiler Hilftsrahmen mit Kippzylinder * Reifen 385/65R22,5 ca. 60% * 315/80R22,5 ca. 70% * 385/65R22,5 ca. 80% * deutsches Fahrzeug * Behördenfahrzeug * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp 00496569

Condition: used, Year of construction: 2018, operating hours: 1,004 h, drive type: Elektro, Wheel loader Technical condition: good Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Fsln Ewtsu D Ruxsgopg Rear tires Condition: 80 - 100% Bulk material bucket, pallet forks

Condition: used, Year of construction: 2012, grinding diameter max. 320 mm grinding length 1.500 mm centre height 160 mm Control Touch Jones & Shipman between centers max. 100 kg table: Traverse Z-Axis 1.645 mm traversing speed 0,0001 - 12 m/min swivable +5 / -5 ° x-axis: Traverse X-Axis 260 mm traversing speed 0,0001 - 6 m/min grinding head: grinding wheel motor 7,5 kW cutting speed 45 m/s Grinding wheel Ø x width x bore 450 x 50 x 203,2 mm Tailstock: Swivel range -15 / +90 ° turning speed range 0 - 660 U/min Torque 27 Nm tool adaptor MK 3 Fpjln Eetqmrpjwtgsg total power requirement kW weight of the machine ca. 8,5 t dimensions of the machine ca. 5,5 x 2,5 x 2,0 m Cylindrical Grinding Machine JONES & SHIPMAN - Suprema Easy 1500 E - Replacement grinding wheel flange - Multi-grain diamond (for circumferential and lateral dressing, 10mm, 1 carat) - Tailstock with micro adjustment (max. adjustment range +-0.05mm) - Pneumatic quill retraction - Two-jaw bezel (range 8-75 mm)

Condition: ready for operation (used), Year of construction: 2013, Functionality: fully functional, PivaPunch punching center PCC 125-e - in very good condition with few operating hours. Fpolnjvxr Tzs Ewtgjg System consisting of coil car, decoiler, straightening machine, loop pit with hydr. transfer tables, automatic punching machine, scrap removal system, exit conveyor, sheet turning unit, stacking system and Siemens system control. Technical data: Coil weight: 10,000 kg Coil inner diameter: 508 mm Coil outer diameter: 1,600 mm Material thickness: 0.5 - 1.5 mm Material width: 60 - 1,250 mm Tensile strength: max. 400 N/mm2 Product dimensions: max. 2,500 mm long For detailed technical specifications see PDF.

Condition: ready for operation (used), Siemens 6FX1120-6BA01 PLC-CPU E-Stand: H / 05 SN:493 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Fjln Ewtjp Ehduogopg

Condition: excellent (used), Year of construction: 2014, operating hours: 63 h, Functionality: fully functional, fuel type: electric, operation weight: 346 kg, fuel: electricity, IPC GANSOW 1010E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1010 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 5600 Sweeping speed (km/h): 7 Tank capacity (l): 65 Filter surface (m²): 4 Dimensions L x W x H (mm) 1500 mm x 970 mm x 1200 mm Weight of the machine ready to work (kg) ~ 346 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER NEW roller brush NEW side brushes Fpoln Ewtjv Aa Afogog NEW roller rubber guards 65l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1010 E sweeper is a perfect machine for effective, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: used, Year of construction: 2004, operating hours: 1,780 h, Work platform/lifting platform JLG E 300 AJP electric telescopic platform, built in 2004, fully functional, batteries need to be replaced!! New batteries can be installed!! Feln Eevxx H Uowtgepg The price is calculated with new batteries!!

Condition: new, Year of construction: 1984, saw blade diameter 400 mm capacity 90 degrees: round 135 mm capacity 90 degrees: square 130 mm 200 x 80 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 1,8 x 1,95 m Automatic circular saw with - Feed roller conveyor 1500 - Roller conveyor with stop 1000mm Fpeln Ewovu Hcvotgjg

Condition: used, Field of application: Construction Empty weight: 749 kg Felnovtwcqe Ewtgopg Make of engine: Electrical Working pressure: 5 - 12 bar Please contact Sales Department for more information

Condition: ready for operation (used), Siemens 6FX1124-0BA02 Board Dualport E-Stand: D SN:333 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Fsln Ewep Rkknjtgjpg

Condition: ready for operation (used), Maho double gripper for MAHO MH 600 E including accessories, see photos, used, normal signs of wear, 100% functional, scope of delivery as per photos Fjln Ewjrv Ta Rotgjpg