Used Gesan Dps 80 for sale (52,939)

Condition: reconditioned (used), machine/vehicle number: 27793, Year of construction: 2017, operating hours: 8,698 h, Friedmann Forklifts - Remade for Action Used industrial trucks from selected premium manufacturers fully serviced, tested and reconditioned by us in accordance with FEM-4.004 (UVV) specifications. Individual conversions of any kind possible on customer request. International transportation with suitable vehicles and customs clearance possible on request. See for yourself and visit us at our factory. Friedmann Forklifts - Quality promise Full functionality according to FEM-4.004 Maintained & tested (C5 test) battery for electrical appliances (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lifting frame, fork carriage, attachments and hydraulic system tested Steering axle tested for safety Bwsb E Ifzjug I Iljijl Driver's seat and seat belt as good as new New paintwork in original colors and original stickers Industrial truck data Manufacturer: Jungheinrich Type: Low lift truck with driver platform Drive type: Electric Load capacity: 1,200 kg Load center of gravity: 600 mm Year of construction: 2017 Operating hours: 8,698 Mast type: Duplex Lifting height: 2,500 mm Fork length: 1,150 mm Own weight: 980 kg + approx. 300 kg (battery) Battery Volt: 24 V Battery capacity test: 80% Charger Volt: 24 V (on request) Front & rear tires: Polyurethane

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Bjb E Ifewc Nvgozijwl Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: new, BETA 80-ZRS-32AT5-E-220-550-970-AK-4BL-1, HSB linear actuator - New Bweb Ejq S Stps Ifziol Model: BETA 80-ZRS-32AT5-E-220-550-970-AK-4BL-1 Condition: New

Condition: excellent (used), 1 x aluminium silo with long standing frame + filter house, ø 3,000 mm Bebjgig D Dj E Ifzijwl designed for a specific weight of 1.2 kg/ dm³ Manufacturer: Zeppelin capacity: approx. 80.000 ltr. diameter: approx. 3.000 mm total height: approx. 15.590 mm Weight: approx. 2.000 kg Specific weight: 1.2 Connections and joints: On the top floor: 1 x roof edge railing (ø 3,000 x 1,200 mm) 1 x folding dome with protective grating DN 600 1 x access ladder to the filter house 2 x crane eyes In the filter house: 1 x flange DN 100 for filling line 6 x air vent DN 600 with filter bag 3 x connection for control/measurement technology in the jacket: 1 x aeration grid (filter house) 1 x filling pipe DN 98 1 x access door Silo ends in a 60° cone NW 1500 with inspection opening. The standing frame is insulated on the inside. Silo has a single ladder with back protection (starting at a height of approx. 4 m).

Condition: excellent (used), first registration: 04/2008, color: grey, Year of construction: 2008, Equipment: ABS, = Further options and accessories = - Air suspension = Remarks = Iveco Eurocargo tractor own weight 3955kg Totall weight 7490 kg with Heinemann 2 axle Lowloader own weight 3500 kg Totallweight 14500 kg Euro5 engine Only 107907km German registration Valid Inspection till 6-2025 = Further information = General information Odometer reading: 107,907 km Cab: Day Technical information Power: 162 kW (220 HP) Fuel type: Diesel Gearbox: 6 gears, manual Dimensions Dimensions (L x W): 1080 x 255 cm Weights Empty weight: 3,500 kg Bobewg A Epe E Ifzijwl Payload: 11,000 kg GVW: 14,500 kg Environment Emission class: Euro 5 Maintenance, history and condition APK (technical main inspection): checked until 06.2025 Technical condition: very good Visual condition: very good Further information Contact Gerrit Haverhoek for more information.

Condition: used, Year of construction: 1997, machine/vehicle number: 24234, LVD folding machine for sale 800 kN 6200 daN Bwob E Ifewhd Rpjziol 03/1997 10.5 kW

Condition: reconditioned (used), machine/vehicle number: 28136, Year of construction: 2016, operating hours: 5,846 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric trucks (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Type: Jungheinrich ECE 225 - Order picker with wide forks (66 cm) Drive type: Electric Load capacity: 2,500 kg Year of manufacture: 2016 Operating hours: 5,846 Lift height: 122 mm Bob E Iewdp Sqsfziowl Overall height: 1,600 mm Fork length: 1000 mm Own weight: 980 kg Battery capacity C5: 80% (protocol included with delivery) Front tires: Polyurethane Rear tires: Polyurethane Charger: upon request

Condition: new, Oil tank capacity: 120Bending capacity: (Flaches Material) 320 x 15Bending capacity: (Runde Rohre) 114 x 8pressure: 80working speed: 10Return speed: 10motor: 10table area: 750 x 1425working height: 930length: 1430width: 750heigth: 1450weight approx.: 1700stroke: 285 UZMA hydraulic horizontal presses with multi-directional feature, pipe, flat bar, profiles, bars, such as all kinds of materials allows us to perform a large number of different operations such as bending, punching, straightening etc. With the fast die changing system, you can quickly bend materials like sheet, pipe, profile and rod with suitable molds without wasting time. Versatile operation feature and easy usage makes UZMA horizontal press machine an essential machine for metalworking shops Standard Accessories: - Steel frame & robust machine design  - Stroke adjustment by digital read out  - Manual or automatic working system  - Easy to change the die by quick change  - Durable construction of tools and tool guides made of high quality and hardened steel  Bsb E Ifzor I H Dceiswl - Foot pedal with digital display and emergency stop switch  - 1 set of pressbrake tooling

Condition: new, Year of construction: 2025, APPLICATIONS The Q-Series single-shaft shredders are suitable for processing almost all types of plastics. The machines shred production waste, pipes, car parts, blow-molded materials such as PET bottles, PE/PP bottles, containers or buckets. In addition, materials such as wood, paper, cardboard can be used shredded without any problems. GENERAL DESCRIPTION Q series is single shaft shredder with powerful hydraulic horizontal system in inclined position. The machine is very versatile and can be used to shred any kind of material, it is well suited for various industries. The rotors have a diameter of 400 mm and a width from 600 to 1700 mm driven by a gearbox drive with low speed and high torque. The hydraulic power unit is well integrated into the machine housing saves space and protects it from damage, but is still easily accessible or removable for maintenance. ADVANTAGES " The cutting crowns are concave ground square blades, producing high quality performance. Knives can be rotated as one side wears. Easily removable screen for quick access to the rotor" and screen replacement. Rotor diameter (mm) 400 Rotor width (mm) 860 Bwsb E Ijp N El Refziol Drive capacity (HP) 30 Rotor knives (pieces) 20 Stator knives (rows) 1 x 3 Hopper opening (mm) 1620 x 560 Total length (mm) 2690 Width total (mm) 1620 Width machine (mm) 930 Height (mm) 1876

Condition: new, Year of construction: 2025, Functionality: fully functional, warranty duration: 24 months, DGUV certified until: 06/2027, Planetary Mixer Model: Planeto 80 L Professional machine with robust technology! for best results! LED display 10 power levels and timer Safety guard/safety grid with protective circuit Mixer with tools: 1 whisk, 1 dough hook, 1 flat beater 1 80-liter stainless steel bowl Electric bowl lift DGUV V3 tested Connection: 400V, 4.5 kW, 16A-CEE plug Dimensions: 720 x 1050 x 1660 mm, W x D x H New machine 24-month warranty + spare parts service Optional: 1 bowl trolley Maintenance contract Instruction & commissioning with a master baker Service package Bwjbsu Amdae E Ifziel Leasing & rental service TOP quality and price in one machine! Your partner with added service!

Condition: excellent (used), mileage: 107,907 km, power: 162 kW (220.26 HP), first registration: 04/2008, fuel type: diesel, color: red, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, spoiler, = More options and accessories = - Roof spoiler - Speed limiter - Fog lights Bjb E Iewg A Eisfzijwl = Remarks = Iveco Eurocargo tractor own weight 3955kg Totall weight 7490 kg with Heinemann 2 axle Lowloader own weight 3500 kg Totallweight 14500 kg Euro5 engine Only 107907km German registration Valid Inspection till 6-2025 = More information = Gearbox: 6 gears, manual gearbox Empty weight: 3,955 kg Payload: 3,535 kg GVW: 7,490 kg APK (main technical inspection): inspected until 06.2025 Technical condition: very good Visual condition: very good Contact Gerrit Haverhoek for more information.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Bwjb E Ifzowcmb Hjisl Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), machine/vehicle number: 28135, Year of construction: 2016, operating hours: 7,907 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION Bwobewdp Sde E Ifziol WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric devices (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Type: ERD 220 - Rider-operated pallet stacker Drive type: Electric Capacity: 2,000 kg Lift height: 2,500 mm Load center: 600 mm Year of manufacture: 2016 Operating hours: 7,907 hours Mast type: Duplex Fork length: 1,200 mm Height: 1,680 mm Weight: 1,200 kg C5 Capacity Test: 24V 375Ah - 80% (test report included with delivery) Charger Voltage: 24 V (upon request) Front Tires: Polyurethane Rear Tires: Polyurethane

Condition: excellent (used), 4 x aluminium silo with long standing frame + filter house, ø 3,000 mm, designed for a specific weight of 0.6 - 1.0 kg/ dm³. Manufacturer: Zeppelin capacity: approx. 80.000 ltr. diameter: approx. 3.000 mm Beb E Ifjgh Dgbeziswl total height: approx. 16.000 mm Weight: approx. 2.000 kg Specific weight: 0.6 kg - 1.1 kg / dm³ Connections and joints: On the top floor: 1 x crane eye In the filter house: 1 x filter frame, approx. 900 x 1,000 mm with venting spigot 1 x manhole DN 600 3 x connection for control/measurement technology (incl. Silopilot, Min-Max detector and additional measuring probe) in the jacket: 1 x access door with lock to the filter house 1 x access door (cone) 1 x signal light Various openings for filling lines Silo ends in a 60° cone NW 1500 . The discharge of two silos takes place by means of a vibrating floor (see picture). 3 of the silos have a two-way ladder with back protection.

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Bjb E Ifswcmbteziewl Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: reconditioned (used), machine/vehicle number: 28134, Year of construction: 2006, operating hours: 5,474 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric trucks (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Bwjbewdp R Hj E Ifziel Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift Truck Data Manufacturer: Jungheinrich Type: Jungheinrich ETV 216 - Reach Truck Drive type: Electric Load capacity: 1,600 kg Year of manufacture: 2006 Operating hours: 5,474 Lift height: 7,100 mm Mast type: Triplex Overall height: 2,900 mm Fork length: 1,150 mm Own weight: 3,350 kg Battery capacity C5: 80% (report included with delivery) Attachments: Sideshifter Front tires: Polyurethane Rear tires: Polyurethane Charger: upon request

Condition: excellent (used), Year of construction: 1997, Boy 80 M Year of manufacture: 1997 Injection unit: Screw diameter: 36 mm Injection weight: 132 g Injection pressure: 2085 bar Metering volume: 147.6 ccm Clamping unit : clamping force: 80 t tie bar distance: 410x358 mm size of clamping platens: 680x555 mm ejector: hydraulic clamping unit: toggle lever Control system: Procan CT Bweb Eewcmbgj Ifzijl Additional equipment: * Dimensions: Weight: 3200 kg Length/width/height: 4.14x1.21x2.07 m Drive: Pumps/motor: 15 kW Heating power: 10,4 kW Total power: 25,4 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), machine/vehicle number: 28086, Year of construction: 2019, operating hours: 5,829 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric trucks (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Mast, fork carriage, attachments, and hydraulic system, including hoses, inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift Truck Data   Beb E Iowdp E Dofziowl Manufacturer: Jungheinrich Type: ERD 220 - Rider-Only High-Pallet Stacker Drive type: Electric Capacity: 2,000 kg Lift height: 2,010 mm Load center: 600 mm Year of manufacture: 2019 Operating hours: 5,829 hours Mast type: Duplex Fork length: 1,200 mm Height: 1,430 mm Weight: 1,200 kg C5 Capacity Test: 24V 375Ah - 80% (test report included with delivery) Front Tires: Polyurethane Rear Tires: Polyurethane

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 Bwsb E Ifzswcmb Teiol It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: reconditioned (used), machine/vehicle number: 27996, Year of construction: 2017, operating hours: 6,556 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric trucks (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected Bweb E Ifewdp Dyeziol As-new driver's seat and seat belt New paint in original colors and original stickers Forklift Truck Data Manufacturer: Jungheinrich Type: Jungheinrich ECE 320 - Order Picker Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2017 Operating hours: 6,556 Lift height: 870 mm Overall height: 1,600 mm mm Fork length: 2,400 mm Own weight: 1,250 kg Battery capacity C5: 80% (report included with delivery) Front tires: Polyurethane Rear tires: Polyurethane Charger: upon request

Condition: excellent (used), Year of construction: 2009, Sumitomo Demag IntElekt 50/370-80 / Electric machine Year of manufacture: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Injection pressure: 1580 bar Metering volume: 44 ccm Clamping unit: Clamping force: 50 t tie bar distance: 370x370 mm size of clamping platens: 520x570 mm ejector: electric clamping unit: toggle lever control: NC5 - touch screen Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface Air valve x 4 Control with hot runners Injection unit hardened - bimetal Central lubrication It is possible to change the screw diameter Dimensions: Bob E Ifzjwcmbyoiowl Weight: 4750 kg Length/width/height: 4.20x1.26x1.84 m Drive: Heating power: 5.7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: reconditioned (used), machine/vehicle number: 26082, Year of construction: 2017, operating hours: 5,147 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Beb Ejwdpy Io Ifziswl Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Serviced and tested (C5 test) battery for electric trucks (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift Truck Data Manufacturer: Jungheinrich Type: Jungheinrich ERE 225 - Electric Pallet Truck Drive type: Electric Capacity: 2,500 kg Year of manufacture: 2017 Operating hours: 5,147 Lift height: 122 mm Overall height: 1,400 mm Fork length: 2,150 mm Weight: 930 kg Battery capacity C5: 80% (report included with delivery) Front tires: Polyurethane Rear tires: Polyurethane Charger: upon request

Condition: used, Year of construction: 2012, Krauss Maffei KM 80-750 CX / Hybrid machine Year of construction: 2012 Injection unit: Screw diameter: 50 mm Injection weight: 343 g Injection pressure: 1892 bar Metering volume: 377 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Bwjbowcmcks E Ifziel Control: MC 5 - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 2 Control unit with hot runners x 6 Hardened injection unit - bimetal Injection unit of the machine is driven by a servo motor controlled by an inverter, electric filling and injection The machine was serviced in Germany Dimensions Weight: 5200 kg Length/width/height: 4.30x1.50x2.10 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: reconditioned (used), machine/vehicle number: 27871, Year of construction: 2018, operating hours: 1,443 h, FRIEDMANN FORKLFITS - REMADE FOR ACTION Bwsb Eou T Su Ne Ifzisl WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION AND KNOW-HOW. Used industrial trucks from selected premium manufacturers from us fully serviced, tested and and reconditioned according to FEM-4.004 (UVV) Specifications. Over 350 vehicles in stock Individual conversions of any kind possible on customer request. International transportation with suitable vehicles and customs clearance possible on request. See for yourself and visit us at our factory. Friedmann Forklifts - Our quality promise Full functionality according to FEM-4.004 Maintained & tested (C5 test) battery for electrical appliances (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lifting frame, fork carriage, attachments and hydraulic system, hoses tested Steering axle checked for safety Forks and lifting chains tested Driver's seat and seat belt as good as new New paintwork in original colors and original stickers Industrial truck data Manufacturer: Jungheinrich Type: Jungheinrich EJE C20 - Electric low lift pallet truck Drive type: Electric Load capacity: 2,000 kg Year of construction: 2018 Operating hours: 1.443 Lifting height: 750 mm Mast type: - Overall height: 1,300 mm Fork length: 1,150 mm Dead weight: 583 kg Load center of gravity: 600 mm Battery capacity C5: 80% (protocol is enclosed with the delivery) Attachments: - Special equipment: - Front tires: Polyurethane Rear tires: Polyurethane Charger: on request

Condition: good (used), machine/vehicle number: 26642, Year of construction: 2017, operating hours: 9,804 h, FRIEDMANN FORKLFITS – REMADE FOR ACTION WE ARE THERE FOR YOU. WITH COMMITMENT, PASSION, AND KNOW-HOW. Used industrial trucks from selected premium manufacturers are fully serviced, tested, and reconditioned by us according to FEM-4.004 (UVV) specifications. Over 350 vehicles in stock. Custom conversions of any kind are possible upon customer request. International transport with suitable vehicles and customs clearance is available upon request. See for yourself and visit us at our factory. Friedmann Forklifts - Our Quality Promise Full functionality according to FEM-4.004 Bwob E Ifzsug Iy Ieijl Serviced and tested (C5 test) battery for electric devices (min. 70% capacity) Serviceable tires according to FEM-4.004 (min. 70% tread depth) Lift mast, fork carriage, attachments, and hydraulic system and hoses inspected Steering axle safety tested Forks and lift chains inspected As-new driver's seat and seat belt New paint in original colors and original stickers Forklift truck specifications Manufacturer: Jungheinrich Type: Jungheinrich ERC 214 - Fixed-platform pallet stacker Drive type: Electric Capacity: 1,400 kg Year of manufacture: 2017 Operating hours: 9,804 Lift height: 2,900 mm Mast type: Duplex Height: 1,900 mm Fork length: 1,150 mm Terrain weight: 1,120 kg Load center: 500 mm Battery capacity C5: 80% (report included with delivery) Front tires: Polyurethane Rear tires: Polyurethane Charger: upon request