Used Gesan Dps 80 for sale (52,768)

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Fgebu Hfwowigxfotsb Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), load capacity: 20,000 kg, net weight: 24,000 kg, Alle bewegingen zijn volledig gestuurde frequentie!! met hefmagneet van 16 ton capaciteit met digitale weegschaal Type: ZZKE Groep FEM 4M Demag neemt DH 2050 H27 ZV3 4/1 gekoelde elektrische kast (en bestand tegen water) Kraan kan gebruikt worden met of zonder operatorcabine. Deze cabine kan eenvoudig worden verwijderd en losgekoppeld met een elektrische stekker. Oorspronkelijke NIEUWE PRIJS bedroeg 350.000 euro Kind of: overhead travelling crane Span: 18 800 mm Tackle speed: 0 > 8 m/min Rotationspeed: 0 > 60 m/min Fgobu Hfwjv Rwf Hjtob Displacementspeed: 0 > 40 m/min Numbre of riggers: double rigger

Condition: used, Year of construction: 2002, installation height: 420 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, pressing force: 800 t, space requirement length: 16,000 mm, space requirement width: 4,000 mm, power: 165 kW (224.34 HP), controller manufacturer: SIEMENS, controller model: S5 115 U, lifting height: 205 mm, material thickness: 12 mm, ram stroke: 205 mm, table length: 900 mm, tool height: 420 mm, CONTROLS .. PLC SIEMENS S5 115 U SLIDE .. total force (nominal): 800 to .. stroke: 205 mm SLIDE (HYDR. PRESS) .. working velocity min.: 10 mm/s .. working velocity max.: 40 mm/s COUNTER RAM .. nominal force: 160 to TOOL DIMENSIONS .. lower table (left-right): 900 mm .. lower table (front-back): 900 mm .. shut height max.: 420 mm OVERALL SPECIFICATIONS (COIL LINES) .. sheet thickness max.: 12 mm DECOILER .. design: cradle Fjbu Hjwhkfasfwtogb ELECTRICAL SPECIFICATIONS .. total power consumption: 165 kW DIMENSIONS / WEIGHTS .. space requirements -left/right-: 16000 mm .. space requirements -front/back-: 4000 mm .. height above floor level: 4000 mm .. height under floor level: 2000 mm ATTACHMENTS -FINEBLANKING PRESS- .. autom. tool clamping device: yes .. light barrier: yes .. closed cabin: yes .. leveller unit: yes .. waste cutter: yes

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 5850 kg Control Unit Brand ENGEL Model n/a Injection Unit Screw diameter 18 mm Fsbu Howikbkefwtogb Stroke volume 25 cm³ Injection pressure 2200 bar Plasticising rate max 36 cm³/s Screw speed 450 r/min Nozzle pressure 28.3 kN Clamping Unit Clamping force 400 kN Opening stroke 338 mm Ejector force for / back 20.1 kN Media Pump drive power 15 kW This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), mileage: 456,398 km, power: 132 kW (179.47 HP), first registration: 03/2016, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 205/75R17,5, fuel: diesel, wheelbase: 3,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,310 mm, loading space length: 5,580 mm, loading space height: 2,400 mm, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - Short Cab - Tail Lift = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 2145 kg, Unladen weight: 5345 kg, Gross weight: 7490 kg, Total fuel capacity: 100 liters, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (Control Unit), Digital tachograph, Air conditioning, Color: White, Rear view camera, Engine power: 132 kW (177 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gears: 6, Power steering, ABS, ASR, Seats: 2, Tail Lift, Tail Lift type: Tailgate, Tail Lift load capacity: 1000 kg, Tail Lift manufacturer: DHOLANDIA, Tail Lift material: Aluminum, Tail lift size: 180x237 = Further information = Transmission Transmission: 6-speed, automatic Axle configuration Tire size: 205/75R17.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 6 mm; Right tire profile: 6 mm; Suspension: Leaf spring Axle 2: Twin tires; Left tire profile: 10 mm; Left tire profile: 10 mm; Right tire profile: 9 mm; Right tire profile: 10 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 774 x 240 x 347 cm Weight Curb weight: 5,345 kg Payload: 2,145 kg GVW: 7,490 kg Functional Tail lift: DHOLANDIA, tailgate, 1,000 kg Loading area height: 97 cm Fsbu Hfewf U Iaswtogb Interior Number of seats: 2 Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 3 Identification License plate number: 11-BHB-9 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing portfolio • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, mileage: 403,762 km, Year of construction: 2014, Serial number: YS2R6X4000210xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20020 Specifications: - 2014 model - EU approved until: 10.11.25 - 581 hp - 403.762 km - Automatic transmission - 6x4 Fgebu Hjwdu Ikefwteb - Euro 6 engine - Front suspension: steel - Rear suspension: steel - Tires (see pictures) - Ploughing rig - Ploughing plate - New batteries - Relief - Air conditioning/ac - Extra lights on the roof - Webasto - Heated mirrors - Ready for delivery Description: We have a 2014 model Scania R580 6x4 tipper truck for sale. The car has previously been on a silver agreement, but the owner has taken care of the service and maintenance himself since then. The battery on the car has recently been changed, and everything works as it should according to the owner. The car is ready for delivery and ready for immediate takeover. Km: 403762 HK: 581 Technical approved: Yes EU-approved until: 10.11.2025 Own weight: 14400 Total Weight: 30000 Payload: 15525 Width: 255 Length: 762 Euro: 6 Gearbox: Automatic

Condition: excellent (used), Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started by our service technicians before sale. Fjbswigwzsu Hfwtegb It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 9,500 kg, spindle speed (max.): 12,000 rpm, tool mount: 40 mm, 3-axis machining center Manufacturer: DMG Series: DMU-80P Year of manufacture: 1999 Control type: Heidenhain TNC-430 Switch-on hours: approx. 95,900 h Program run: approx. 28,100 h technical data: ----- - Travel X-Y-Z: 800 x 700 x 600 mm - Work table: 900 x 630 mm - Spindle max.: 12,000 rpm Fgsbjrqhbbou Hfwtjb - Swivel head H/V - Tool holder: SK40 - Tool magazine: 30x / chain - Coolant system - Central lubrication - SpäFö - Weight: approx. 9.2 t Accessories: ----- - Manuals - 3D workpiece probe TS-641 Remarks: ----- - FEB 2023: new spindle + kinematics - FEB 2023: new E-module 36kW - APR 2023: new AC servo inverter - DEZ 2015: General overhaul - Machine absolutely true to size!

Condition: good (used), Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : n° 4 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Fgjbu Hfworzqy Nsteb Compressed air 6/7 bar Machine weight kg 2900 Total weight kg 3400 (Machine + roller benches)

Condition: used, Year of construction: 2003, total height: 2,500 mm, total length: 3,500 mm, total width: 2,450 mm, Empty weight: 4.500 kg Price: On request Fjbu Hfwewgc Ikstjgb - Year: 2003 - Documentation available: No - CE mark available: Yes - Serial number: 208996 - Control: CNC - Motor power: 7.5kW - Travel Z: 510mm - Model: kslijper - Travel X: 800mm - Grinding diameter: 300mm - Travel Y: 600mm - Table length: 800mm - Magnet size: 610mm - Table width: 420mm - Transport dimensions: 3500mm x 2450mm x 2500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), mileage: 571,208 km, power: 279 kW (379.33 HP), first registration: 10/2001, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, driver cabin: sleeper cab, emission class: euro2, suspension: steel-air, Year of construction: 2001, Equipment: ABS, sleeping cabin, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Fgjbewf Nu Ieu Hfwtob Weights Empty weight: 7.080 kg Carrying capacity: 10.920 kg GVW: 18.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Pedro or Arie for more information

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Fgsbu Hfou Hanyewteb Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Fgjbujwigu To Hfwtjb Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, Year of construction: 2008, travel distance X-axis: 1,700 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,400 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 3,959 mm, table width: 1,000 mm, table length: 1,000 mm, overall weight: 30,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 37 W, space requirement length: 9,007 mm, space requirement width: 5,676 mm, CONTROLS .. CNC controls MAZATROL 640M WORKING RANGE -CUBIC- .. X-axis travel: 1700 mm .. Y-axis travel: 1400 mm .. Z-axis travel: 1400 mm TABLE .. table surface (left-right): 1000 mm .. table surface (front-back): 1000 mm .. workpiece load (max): 3000 kg SPINDLE / HEAD .. spindle revolutions (min): 35 /min .. spindle revolutions (max): 10000 /min .. drive power: 37 kW .. spindle torque: 525 Nm AXIS DRIVES .. rapid traverse: 40000 mm/min .. rapid traverse X: 40000 mm/min .. rapid traverse Y: 40000 mm/min .. rapid traverse Z: 40000 mm/min TOOL MAGAZINE .. magazin type: chain magazine .. number of positions: 160 .. tool diameter max.: 135 mm .. - with free neighbour positions: 260 mm .. tool length max.: 650 mm .. tool weight max.: 30 kg .. tool changing time: 6.9 s AUTOMATIC WORKLOAD EQUIPMENT .. store type: pallet changer .. number of store positions: 12 .. number of pallets: 12 ELECTRICAL SPECIFICATIONS .. mains power supply: 100 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 9007 mm .. space requirements -front/back-: 5676 mm .. total height: 3959 mm .. total weight approx.: 30000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: no .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes We are selling 2 Mazak FH-10800 built in 2008 and 2006, including pallet station. -Capacity for 12 pallets - Tool holder SK 50 (Din 69871 A) Fgjbuewhbufe Hfwtob -Hangs on central cooling, high pressure pump is included -Clamping cubes each 500x1000x1500 mm and 650x650x1500 mm

Year of construction: 2008, Condition: used, filling amount 180 l injection pressure 1,3 bar 700 l/min diameter 800 mm voltage 400 V frequency 50 Hz Fgjbu Hswgi Epjfwtjb dimensions ca. 1200x1300x1100 mm weight of the machine ca. 300 kg

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L705226, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) Fsbu Hfwovai Swotegb X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Steady rest

Condition: good (used), Year of construction: 2000, Hacksaw, KASTO, Type: PSB 280U, Year 2000 Cutting range: Round max.: 280 mm Flat max.: 280 mm x 160 mm Fobu Hfwowgnk Rjtsgb Square max.: 240 mm x 240 mm 2 motor speeds Transport weight approx. 500 kg. With miter cut, length stop, coolant system, machine documentation available. Machine in good technical and visual condition.

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 8300 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Fobu Hfwjwg Ibpetsgb Spindle speed range 36000 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 80 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 80 m/min Tools Max weight 1.5 kg Max tool diameter 25 mm Max tool length 150 mm Type of tool holder HSK-E50 This 3-axis +GF+ AgieCharmilles Mikron XSM 800 was manufactured in 2007. A vertical machining centre, it offers advanced capabilities for detailed and complex machining tasks. Consider the opportunity to buy this +GF+ AgieCharmilles Mikron XSM 800 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2006, Demag Ergotech Extra 200/580-840 with the Wittmann-Demag W723 robot / Very good technical condition Year of manufacture: 2006 Injection unit: Screw diameter: 50 mm Injection weight: 400 g Injection pressure: 1646 bar Dosing volume: 442 cc Clamping unit: Clamping force: 200 t Type distance: 580 x 580 mm Clamping platen size: 860 x 860 mm Ejector: hydraulic Clamping unit: toggle lever Control system: NC4 Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runners Injection unit hardened - bimetal Central lubrication Wittmann-Demag robot W723 Year of manufacture: 2007 5-axis robot: 3 axes are driven by servo motors (electric); axes A (rotation) and C are pneumatic Travel paths: X-550, Y-1200, Z-2000 Touch control panel Robot safety package Febu Howigtcjfwtegb Robot with adapter and protective housing Robot purchase for an additional charge Dimensions: Weight: 8200 kg Length/Width/Height: 5.60 x 1.70 x 2.10 m All machines offered are tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2004, Arburg 420C 800-250 with the Wittmann W721 robot Year of construction: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Injection pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Original mold crane Robot Wittmann W721 Year of manufacture: 2007 4-axis robot: 3 axes are driven by servomotors (electric); axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW Fobu Hfwswignmjtegb All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Fgjbu Hjwigngefwtsb Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2000, Arburg 370S 800-350 Year of manufacture: 2000 Injection unit: Screw diameter: 35 mm Injection weight: 117 g injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 80 t tie bar distance : 370x370 mm size of clamping platens: 570x570 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap Robot interface Hydraulic core pull x 2 Injection unit hardened - bimetal Built-in sorting flap Integrated lateral original Arburg sprue picker Dimensions: Weight: 3800 kg Length/width/height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating power: 10,2 kW Total power: 28,7 kW All offered machines are started by our service technicians before sale. Febswigm Neu Hfwtegb It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 Year of manufacture: 1999 injection unit: Screw diameter: 35 mm Injection weight: 121 g Injection pressure: 1820 bar Metering volume: 144 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm Fgjbu Hfwjwigm Astsb size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for medical industry - pure production conditions Euromap 12 Robot interface Core pull control injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Fjbu Hfwswigmvjtjgb Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2012, Arburg 680CB 400-170 / Vertical injection molding machine, tie-bar-less / Very good technical condition. Year of manufacture: 2012 Injection unit: Screw diameter: 25 mm injection weight: 54 g Injection pressure: 2500 bar Metering volume: 59 ccm Clamping unit : clamping force: 40 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Very good technical condition Fgobu Hewiggpofwtjb Vertical injection molding machine, tie-bar-less Euromap 67 Robot interface Air valve x 3 Hydraulic core puller x 3 Hot runner control x 12 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorized service Arburg Original Arburg mold crane Dimensions: Weight: 6500 kg Length/width/height: 1.97x1.69x3.40 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request