Used Gesan Dps 80 for sale (52,767)

Condition: good (used), electric motor, three-phase motor -Electric motor: type T 80B 2 AB3 -Power: 1.1 kW -Speed: 2820 rpm -Shaft: Ø 19 x 40 mm -Protection class: IP 54 -Dimensions: 285/155/H190 mm -Weight: 10.0 kg Foln Nrnjv Hzd Eofjgb

Condition: excellent (used), mileage: 35,445 km, power: 460 kW (625.43 HP), fuel type: diesel, color: blue, axle configuration: 8x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 5,250 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, differential lock, onboard computer, parking heater, sleeping cabin, spoiler, General information Cab: High sleeper cab Field of application: Freight transport Serial number: W1T96342010675949 Technical information Engine capacity: 15.569 cc GVW: 13.970 kg Drivetrain Make of engine: Daimler AG Axle configuration Axle 1: Tyre size: 385/65R22.5; Suspension: air suspension Axle 3: Tyre size: 315/80R22.5; Suspension: air suspension Axle 4: Tyre size: 315/80R22.5; Suspension: air suspension Interior Steering wheel placement: Left Condition Technical condition: very good Visual appearance: very good Other information Vehicle's outer dimensions: 8,177x2,55x3,854 Production country: DE Fifth wheel pressure: 13630 kg Foln Nrnewht Udefjgb Axle load: 13400 kg Additional information Please contact Matthias Eyckmans, Bart Apers or Jeroen Heindryckx for more information

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Fgjln Nrnewh Ttmjfjb Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, mileage: 158,098 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 04/2007, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, loading space volume: 36 m³, emission class: euro4, color: white, number of seats: 3, total length: 8,090 mm, total width: 2,550 mm, total height: 3,550 mm, Equipment: ABS, tail-lift, Plywood box body "SPIER", swing tailgate via tail lift, screen-printed floor, 7 lashing eyes per side, interior lighting, "MBB" tail lift type: 1000 RENTFX, max. load capacity 1000 kg, aluminum sign with hazard lights 1800 mm, ball-head trailer coupling, driving school version - dual controls, ABS, engine brake with constant throttle, cruise control, adjustable steering column mount, standard driver's seat, center seat with seat belt, storage box, square plastic fuel tank (approx. 100 liters), leaf spring suspension, vehicle can be covered with advertising and/or lettering. Fgjlnowibvls Nrnfsb Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us!

Condition: ready for operation (used), Baumüller DSG 56-S servo motor / Reis robot SN:20329580, used, normal signs of use, 100% functional, scope of delivery as per photos Fgsln Nretann Aonfeb

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2700 mm Measurements depth 4200 mm Measurements height 2650 mm Machine weight 11500 kg Fgjln Njwh A I Ternfeb Control Unit Brand MAZATROL Model PC-FUSION-CNC Movement X-Axis Movement 560 Y-Axis Movement 610 Z-Axis Movement 560 Additional Equipment Tool Capacity: 64 positions Maximum Tool Diameter: 150 mm /Maximum Tool Length: 375 mm/ Maximum Tool Weight: 12 kg This 4-axis Mazak FH-4800 horizontal machining center was manufactured in 2002. It offers robust and precise machining capabilities, ideal for a variety of applications. Consider the opportunity to buy this Mazak FH-4800 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Switchgear, control, UV light -Honeywell Keyboard Display Module German -unused: in original packaging -Number: 4x available Fgjlnod Ipnfs Nrnfsb -Price: per piece -Dimensions: 130/95/H50 mm -Weight: 300 g

Condition: excellent (used), mileage: 39,220 km, power: 460 kW (625.43 HP), fuel type: diesel, color: blue, axle configuration: 8x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 5,250 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, differential lock, onboard computer, parking heater, sleeping cabin, spoiler, General information Cab: High sleeper cab Field of application: Freight transport Serial number: W1T96342X10674260 Technical information Engine capacity: 15.569 cc GVW: 13.950 kg Drivetrain Make of engine: Daimler AG Axle configuration Fjlnjwht T Tj Nrnfogb Axle 1: Tyre size: 385/65R22.5; Suspension: air suspension Axle 3: Tyre size: 315/80R22.5; Suspension: air suspension Axle 4: Tyre size: 315/80R22.5; Suspension: air suspension Interior Steering wheel placement: Left Condition Technical condition: very good Visual appearance: very good Other information Vehicle's outer dimensions: 8,177x2,55x3,854 Production country: DE Fifth wheel pressure: 13630 kg Axle load: 13400 kg Additional information Please contact Matthias Eyckmans, Bart Apers or Jeroen Heindryckx for more information

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical positions X-axis: 1,350 mm Y-axis: 770 mm Z-axis: 1,330 mm NC rotary table: B-axis input and display resolution: 0.001° Clamping area: 800 x 800 mm Max. load: 2,000 kg Interference diameter: 1,600 mm Work spindle: Speed range: 20...6,000 rpm Tool holder: HSK 100 Fgslewig Ugen Nrnfjb Drive power at 60% duty cycle: 30 kW Torque at 60% duty cycle: 1,080 Nm Automatic tool changer stations: 240 Coolant system with fleece gravity filter and 80 bar pressure output RENISHAW measuring probe OMP60 Oil and emulsion mist extraction KNOLL chip conveyor Tool breakage detection

Condition: used, Year of construction: 1998, Functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM Feln Nrnjwgd Rgjfogb HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: used, Year of construction: 1971, Serial number: 37xxxx Please contact ATS Norway AS for more information Fgjln Njvgyafornfeb Please provide reference number upon request: 18875 Specifications: - 1971 model - Tires (see pictures) - Floors with doors (see pictures) - Comes with cabin (see pictures) - Scania 81 engine - Delivery by agreement Description: This Scania L80 is sold as a rep object. The owner has put a Scania 81 engine in it. It comes with the doors pictured. An extra cabin is included. Delivery by agreement. HK: 202 Own weight: 8475 Total Weight: 8800 Payload: 255 Width: 345 Length: 878

Condition: used, Functionality: fully functional, Year of construction: 2010, operating hours: 16,419 h, load capacity: 8,000 kg, lifting height: 6,000 mm, fuel type: electric, mast type: standard, construction height: 4,185 mm, fork carriage width: 1,600 mm, fork length: 2,400 mm, total length: 4,100 mm, drive type: Elektro, construction width: 2,000 mm, net weight: 12,846 kg, Electric 4-wheel forklift Load center of gravity: 900 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: pneumatic Fgeln Neu Rgqvsrnfob Front tires size: 8.25-15 Rear tires type: pneumatic Rear tires size: 8.25-15 Battery voltage: 80V Battery Ah: 1550Ah Battery year of manufacture: 2015 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts and side loaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase and financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle freely, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this ECF80-9 P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We would also be happy to exhibit your vehicle for commission sale. Side shift, fork positioner, Heating, full cabin, Camera

Condition: good (used), Gear motor, electric motor, three-phase motor -Manufacturer gearbox Lenze type: 12.602.10.1.5 -Manufacturer motor HEW type: EEXF80L/4 -Speeds: 24 rpm -Power: 0.75 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 1x motors available Fsln Nrodfglrenfegb -Price: per piece -Dimensions: 505/230/H170 mm -Weight: 23.3 kg/piece

Condition: good (used), power: 245 kW (333.11 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 5,243 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL180HEF0008019 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 38 km/h Empty weight: 29.700 kg Functional Lifting capacity: 8.710 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 9,98x3,96x3,58 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information Foln Nrjwhfwwsnfegb

Condition: used, Functionality: fully functional, turning length: 2,000 mm, turning diameter: 360 mm, spindle bore: 80 mm, Main drive Power 60% ED: 41 kW Speed range, 2-stage gearbox: 16-3150 min-1 Fjln Nswig Sljrnfegb Work spindle C-axis above separate servo motor Speed: 0.01-60 min-1 Torque, 60% ED: 315 Nm Coolant system with centrifugal pump

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, total length: 11,055 mm, total height: 4,140 mm, net weight: 45,000 kg, total depth: 6,320 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Fgjln Nov Sfmujrnfjb Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: used, Year of construction: 2008, Serial number: YS2R6X2000204xxxx Please contact ATS Norway AS for more information Fgjln Nsvg Azfjrnfjb Please provide reference number upon request: 19181 Specifications: - 2008 model - Km: Owner says it is between 800-900,000 - 6x2 - Zepro lift - Suspension: Air - Retarder - Turbo replaced in 2018 - Sandspreader - Tires (see pictures) - Extra lights - Damage to the right side - Damage under the truck (see picture) - AC/climate - Ready for delivery Description: 2008 Scania R480 rep. object. Owner says the truck has covered somewhere between 800,000 and 900,000 km. The turbo was changed on it after it overturned. The truck overturned on its side. It was started a month ago when they were going to remove the box. Is something hanging under the truck. Ready for delivery. HK: 480 Technical approved: no EU-approved until: 30.04.2018 Own weight: 14360 Total Weight: 27000 Payload: 12565 Width: 260 Length: 1128 Euro: 4

Condition: used, Year of construction: 2023, operating hours: 1,117 h, 2023 | Caterpillar M318 with variable angle boom with Oilquick OQ80 quickcoupler (without attachment) | Used Wheeled Excavator | 1117 hours 📍Location: Germany, Sindelfingen Foln Nrjwin Uhsnfogb 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 199000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 53 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good machine in working condition with small jobs to do. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "37866 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump,, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Bahco, hydraulic pump, hand pump, two-stage -Type: P80-2400F -Pressure range: up to 80 Mpa / 800 bar -Oil volume: 2,4 L -Number: 2 piece available Feln Nrnekuctnofogb -Price per piece -Dimensions : 620/160/H160 mm -Weight: 9,4 kg/pc.

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details x-travel 800 mm y-travel 500 mm z-travel 500 mm Control Siemens 828D total power requirement 25 kVA weight of the machine ca. 6,25 t dimensions of the machine ca. 3887 x 2256 x 2917 mm Additional information CNC control: Siemens 828 D Machine was put into operation in 2022. Milling spindle overhauled in December 2024. The Siemens main spindle motor was generally overhauled in April 2025. New price EUR 91.100,- Table -Table size (LxW) 900x520 mm -Working height (table/floor) 870 mm -T-slots, number 5 pieces -T-slots, width 16 mm -T-slots, distance 80/100 mm -max. Table load 450 kg Travel paths -X-axis 800 mm -Y-axis 500 mm -Z-axis 500 mm Spindle -tool holder DIN 69871 40 ISO -Spindle speeds 10000 rpm -Spindle motor 10.5/15.8 kW -Spindle torque 50.0/75.4 Nm -Distance spindle nose/table 100-600 mm Feed rates -X-axis 10 m/min -Y-axis 10 m/min -Z-axis 10 m/min -Rapid traverse X-axis 30 m/min -Rapid traverse Y-axis 30 m/min -Rapid traverse Z-axis 30 m/min Tool changer -Type Arm type -Tool stations 30 stations -Max. tool -0 75/125 mm -max. tool length 300 mm -max. tool weight 8kg Coolant system -Pump output 155 l/mm -Tank capacity 496 liters Chip flushing system -Pump motor 850 W -Pump output 130 l/min -Pump pressure 4 bar Drive performance - Main drive motor output 10.5/15.8 kW - X-axis drive 2.64 kW - Y-axis drive 2.64 kW - Z-axis drive 5.4 kW Connected load 25 kVA Machine dimensions -Length without chip conveyor 2652 mm -Length with chip conveyor 3887 mm -Depth/width 2256 mm -Height 2917 mm Machine weight 6,250 kg Equipment: -CNC control Siemens 828D including ShopMill with 10.4 display -Portable electronic handwheel -Cooling through the spindle (IKZ) 20 bar with built-in coolant tank and cartridge filter system 40 microns -10,000 rpm belt drive spindle ISO 40 Foln Nrewh Ndhsnfjgb -Precision spindle, dynamically calibrated -Automatic 30-way tool changer ISO 40 (double arm version) -Precision ground work table with 5 T-slots, size 16 -C3 precision ball screws, pre-tensioned in all 3 axes -Servo motor with direct drive for all axes -INA linear guides (roller guide) in all 3 axes -Automatic lubrication (oil) of the guides -Telescopic guide covers for all Axes -rear 4 bar chip flushing system -coolant system with integrated coolant tank and 4 cooling nozzles (3x water/1x air) -hinge - chip conveyor system with side discharge -full enclosure with roof and sliding doors with large window areas -light bar on the roof to display the machine status -work area lighting -side opening safety windows for easy machine cleaning -side, pivoting control panel -switch cabinet with heat exchanger -rigid thread cutting without compensating chuck (ragid tapping) -low voltage circuit -EMC and safety module -machine in accordance with CE -machine documentation / German-electronic

Condition: good (used), mileage: 197,840 km, power: 132 kW (179.47 HP), first registration: 03/2011, fuel type: diesel, color: grey, axle configuration: 4x2, tire size: 215/75R17,5, fuel: diesel, wheelbase: 4,200 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: ABS, air conditioning, cruise control, parking heater, = Additional Options and Accessories = - Digital Tachograph - Double Cab - Tachograph (Recording Device) = Remarks = Number of axles: 2, Configuration: 4x2, Payload: 1600 kg, Unladen weight: 5890 kg, Gross weight: 7490 kg, Total fuel capacity: 200 liters, Unbraked towing capacity: 750 kg, Braked center axle towing capacity: 3500 kg, Suspension type: Air suspension, Cab type: Double cab, Cruise control, Tachograph (Recording Device), Digital tachograph, Air conditioning, Auxiliary heating, Color: Gray, Engine manufacturer: M.A.N., Engine power: 132 kW (177 Hp), Fuel: Diesel, Euro: 5, Transmission type: Manual, Gears: 6, Clutch pedal, Power steering, ABS, Seats: 6 = Additional Information = Drivetrain Engine Brand: MAN Transmission Transmission: 6-speed, manual transmission Axle Configuration Tire Size: 215/75R17.5 Brakes: Disc brakes Foln Nrov Nguzonfegb Axle 1: Steered; Tire profile left: 10 mm; Tire profile right: 9 mm; Suspension: Leaf spring suspension Axle 2: Twin tires; Tire profile left inside: 10 mm; Tire profile left outside: 10 mm; Tire profile right inside: 9 mm; Tire profile right outside: 13 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 748 x 255 x 311 cm Weight Curb weight: 5,890 kg Payload: 1,600 kg GVW: 7,490 kg Interior Number of seats: 6 Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 1 Identification License plate: BZ-BL-05 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: ready for operation (used), Drukbuigmachine voor het buigen van buizen met en zonder doorn Buigen onder druk maakt het mogelijk om zeer kleine buigradiussen te produceren (minimale radius 1 x D). Hierdoor kunnen bijvoorbeeld ketelinstallaties met een hoger vermogen in kleinere afmetingen worden geproduceerd. Drukbuigen maakt ook het gebruik van zeer lange buizen mogelijk, omdat er geen doorn nodig is. De buislengtes kunnen achter de machine aan elkaar worden gelast en tot afgewerkte systemen worden gebogen, waardoor er geen paswerk nodig is. Bovendien garandeert drukbuigen de naleving van de voorgeschreven wanddiktetoleranties in de buisbochten volgens VGB. Vergeleken met conventioneel buigen met een doorn is de afname van de wanddikte aan de buitenzijde van de buis bij drukbuigen zonder doorn zeer gering. Bij gebruik van een buigdoorn maakt drukbuigen het mogelijk om bochten te maken uit dunwandige holle legeringsbuizen met zeer kleine buigradiussen (1 x D), omdat door drukbuigen de buitenwand van de bocht wordt ontlast Er zijn veel hulpmiddelen inbegrepen Drukbuigen of drukbuigen doornvrij koudbuigen Max dia tube x thickness: Ø 89 x 5 mm Fgoln Nrev Sfivenfsb Max bendingradius: 180° Back stop max tubelength: 6000 mm Bending die: yes

Condition: used, Year of construction: 2021, General information Field of application: Construction Serial number: M200044366 Weights Empty weight: 3.768 kg Functional Lifting capacity: 680 kg Working height: 1.000 cm Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Fgolnstvdlts Nrnfeb Tyre brand: Outrigger Transport dimensions (LxWxH): 3.53x1.76x2.46 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, power: 8 kW (10.88 HP), fuel type: diesel, Year of construction: 2019, Field of application: Construction Drive: Track Empty weight: 1.010 kg Make of engine: Yanmar Foln Nrnsuracyjfegb Serial number: WNCE0801LPAL03492 Tyre brand: - Transport dimensions (LxWxH): 2.64x0.75x2.25 Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: used, Year of construction: 2020, fuel type: diesel, power: 65 kW (88.38 HP), motor manufacturer: -, Field of application: Construction Empty weight: 83 kg Generator capacity: 8 kVA Serial number: T57F0019080055255 Transport dimensions (LxWxH): 0.68x0.55x0.55 Fgoln Nrotr Ivwenfsb Please contact Pfeifer Rentals & Sales B.V. for more information