Used Gesan Dps 200 for sale (41,528)

Condition: excellent (used), Here we offer a climatic test chamber. Air cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door disassembled: 1500 x 1940 x 925 mm test chamber: 720 x 690 x 560 mm door, clear width: 720 x 690 mm viewing window, heated: 500 x 600 mm Temperature range +5 to +100 C heating: 4,0 K /min Csbvddeiz Tqcorbsgt Cooling: 0.6 K /min Climate range +10 to +95 C Humidity range: 10 to 95 % r.H. Humidity difference, temporal: ≤ ± 3.0 Water connection humidifier: city water or distilled water 20l reservoir tank. Mains connection: 400 V 3/N/PE, AC, 50 Hz Power requirement max : 6,3 kW Weight : 500 Kg Type : 3416/16 Refrigerant : R134a For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Year of construction: 2015, operating hours: 3,572 h, fuel type: electric, mileage: 3,572 km, lifting capacity: 2,000 kg, net weight: 1,200 kg, This electric ride-on pallet truck from the brand ATLET is from 2015;The pallet truck has a capacity of 2,000 kg;Equipped with long forks of 1,600 mm;The pallet truck has a battery from 2015 with an external charger 3,572 hours on the counter;Make an appointment for a test drive or order the pallet truck in our webshop! Cgjbjvcfacevddrbot

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, A used Rautomead RMT 200 is for sale. Inspection on site is possible. More technical details are available upon request. Cgjbjv Rz Ekovddrbet

Condition: used, overall weight: 36,000 kg, maximum load weight: 27,570 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 2,708 mm, loading space volume: 92 m³, first registration: 12/2020, next inspection (TÜV): 01/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, KNAPEN K 200 moving floor +/- 92 cbm, "Cargo-Floor" floor with 21 boards 10 mm, service door front, stainless steel wear plate rear under moving floor, wear plates at the end of the floor boards and on the side wall 3000x2000, complete emptying (with running bulkhead), with cable winch, push-in and push-out function, KNAPEN radio remote control V2 (for floor, lift axle, working lights, hydraulic tailgate), loading pressure gauge, access and standing area at the front of the body, roller tarpaulin, bumper with towing eye, oil temperature safety device, 3x reinforced waste bows ALCOA Durabright, ABS front standing area on body, roller tarpaulin, bumper with towing eye, oil temperature safety device, oil cooler, 3x reinforced waste bows, ALCOA Durabright aluminum rims, ABS, EBS, SAF INTRA CD axle(s), disc brake system, 1. Axle - lift axle, rear steering axle, air suspension with lifting and lowering device, aluminum drop supports, LED work lights: on the seat posts, behind the last axle and in the body, 30-litre water tank, reversing camera, stainless steel storage box, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Csbovnp Uhsvddrbegt Please contact us!

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm Cebvovy Iklsddrbegt total power requirement 3 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Condition: good (used), Height 2300 Width 2700 mm Length 2200 mm Weight 5000 kg Voltage Electrical: 400V 50Hz 3N Installed Power 102 kw Main material Stainlees Steel Cutter Type Vacuum Bowl Cutter Cobvdsrn S Azsdrbegt Bowl made of Stainless steel Bowl capacity 200 l Knives amount 6 pc. Knife shaft revolutions 680-5050 rpm Bowl revolutions 4-16 rpm

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Cebvdsk Scxmodrbegt Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 1991, max. bar diameter: 42mm Chuck diameter: 40mm Cgobevy Uy Hevddrbot Diameter over cross slide: 160mm Speed range: 10-5000 rpm Turret with 12 stations (not driven) 12 Chip conveyor Bar loader FMB turbo 3000 max. bar length: 3m

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 2469-0719, total width: 980 mm, total length: 1,052 mm, total height: 964 mm, type of input current: three-phase, overall weight: 20 kg, Equipment specifically designed for cleaning engines, engine parts, and accessories. The Motor Clean range is designed to meet the needs not only of automotive repair shops but also of marine and cogeneration engines, the aeronautical industry, and engine grinding and remanufacturing workshops. The products in the Motor Clean range achieve high-quality cleaning, effectively removing all types of sediment: grease, oil, and carbon deposits. Immersion cleaning in an ultrasonic tank achieves high-quality cleaning on any part with hard-to-reach gaps and cavities. Csbvddsv Rnx Derbogt

Condition: used, overall weight: 39,000 kg, maximum load weight: 30,700 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,600 mm, loading space volume: 87 m³, first registration: 03/2017, next inspection (TÜV): 10/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Sliding floor approx. 90 cbm, floor with 21 10 mm boards, stainless steel wear plate at the rear under the sliding floor, complete emptying (moving bulkhead), push-in/push-out function, cable remote control, foldable upper belt, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, foldable rear light protection, ABS, EBS, disc brake system, lifting axle, last axle steered, BPW support winches, SAF INTRA CD axle(s), reversing lights, air suspension with lifting/lowering device, Wabco Smart Board, 2-line trailer brake, 15-pin and ABS trailer socket, vehicle can be covered with advertising and/or labeled Cobvdevnmw Hjdrbjgt Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: excellent (used), Year of construction: 2019, Functionality: fully functional, fuel type: electric, Acrylic / Plexiglass Edge Milling and Polishing Machine Cgebvddjv Sm Tverbet Edge milling / polishing machine (SHOW ROOM - 0616728) with 2 mechanically synchronized conveyor belts. Automatic adjustment of the material thickness. Fast tool change, etc. incl. Tool for high gloss ST-NX-2 (119 822 922) max. Material thickness: 20 mm Cutting depth: 0.5 mm Motor power: 0.7 kW Feed: 0 ... 3 m / min Weight: 50 kg Elek. Connections: 230V - 50Hz The polishing machine has been used very rarely and is therefore offered for sale.

Condition: ready for operation (used), Year of construction: 2022, A Grünig sweeper for the front mounting plate of a carrier vehicle is available. Working width: 2000mm, dirt hopper volume: 305l, sweeping roller diameter: 605mm, water tank capacity: 100l, drive: hydraulic. Machine dimensions X/Y/Z: approx. 2200mm/1550mm/850mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Cgsbjv Rp Slevddrbst

Condition: excellent (used), Nabertherm Type: Q 200 Quenching bath Baths for quenching in oil or water as well as for cleaning and degreasing. Oil baths ensure uniform cooling of the workpieces and are fitted with lids, to immediately extinguish any ignition of the oil. An appropriate degreasing additive should be added to the water bath to clean the workpieces before tempering. Baths are supplied with batch carrier as well as inlet and outlet. Bath Q 200 Internal dimensions: Width 380 mm , Depth 340 mm , Height 450 mm External dimensions: Width 550 mm , Depth 550 mm , Height 900 mm Volume 190 liters quenching capacity 25 - 30 kg/h Max. batch weight 20 kg Heating element Q 200 Connected load 6 kW Supply voltage 400 V Condition: used Scope of delivery: (see picture) Cgobotq Hf Hjvddrbjt (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 24580 € 503.89 € 0.4 - 3.5 mm 200 mm 700 mm² 80 mm 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 4 gear rollers drive. Prevents the separation of the rollers during piloting operation for higher accuracy Remote service module EUCHNER hand wheel Option: Siemens Encoder € 9.110,-- Cgobvjvdlalsddrbjt (for higher accuracy and automatic slip comensation - espacially in case of higher feeding speed and thicker material)

Year of construction: 2015, Condition: used, Type: Mower Cgebvddroh Rnrbobst Applicable material: Hay Empty weight: 410 kg

Condition: excellent (used), Espec Type: Espec Model: TSA-303EL-W Water-cooled Cold chamber: -65° to 0°C Heating chamber: +50 to 200°C System: Two-zone test by damper switching Temperature fluctuation ±0.5°C Hot chamber: Temperature Heating time: Ambient temp. to +200°C within 15 min. Cooling chamber: Temperature pull-down time: ambient temp. to -70°C within 40 min. Temperature recovery: within 10 min. Internal dimensions (W x H x D mm): 970 x 460 x 670 External dimensions (W x H x D mm): 1870 x 1900 x 1770(1805) Power supply: 400 V AC 50Hz: 70 A Refrigerant: R449A 5 kg R23 2.0 kg Weight: approx. 1450 kg Year of construction 2018 Csbsvgw Uaevddrbogt The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: new, neu ca. 4 Monate ab Auftragse Italien 132500 € 2636.75 € 200 to 500 mm 1250x1000 mm 600 mm 25 mm/s 3,5 mm/s 7.5 kW 1550 mm 1300 mm 2700 mm 4-pillar guide ram guide round table and ram with T-slots 2 hand operation Siemens PLC manometer users manual OPTIONS: Light barrier € on Request Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € on Request Working hour counter € on Request Stroke counter € on Request Decompression valve € on Request Oil cooler with decompreission valve € on Request Pressur switch € Cgobvddou Sbnxerbjt on Request

Condition: excellent (used), Here we offer you a Heraeus Vöstch dryer for coating materials. Maximum concentration of flammable substances of < 40 % of the lower explosion limit (LEL). Highest temperature of the heating surface above 750 °C Equipment description: Technical data: Interior (usable space) 0.216 m3 Inner dimensions: width 600 mm height 600 mm depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Loading / load capacity Roller conveyor total 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Recirculation air volume flow increased 33 m3/h Total steam space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Cgebohv Ru Sevddrbjt Over-temperature limit controller (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60Hz Rated current 12.0 A Rated power 6.0 kW Connected load 7.0 kW Weight: 275kg Type: LTU 60/60 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature chamber. Heraeus Vötsch temperature chamber LN2 cooled (liquid nitrogen) Temperature chamber is operated with liquid nitrogen (cooled down) Temperature range -60°C to +180°C Test chamber dimensions: Depth: 575 mm Width: 550 mm Height: 645 mm Outer dimensions. Depth: 1465 mm Width: 830 mm Height: 1740 mm Test chamber volume 200 liters Mains voltage: 400V ±6/10% 3/N 50Hz Rated power : 17KW Rated current : 29A Weight approx. 350 kg Type: HT 6020/S For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant Cgjbvjh Rd Idjddrbst 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Cobvddrjuv Ewrebegt Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: excellent (used), Here we offer you a plasma - discharge layering system. Plasma - discharge layering system solut Plasma plant for the decoating of DLC Vacuumrecipient 200 x 200 x 200 mm Microprocessor control for gas mixtures Cgobvdodz Achedrbet PC engine (industrial PC) and printer for process documentation Vacuum pump, Alcatel model ACP 28 Type: As 200 DLC Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Cgebvddrelat Aaebjt Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 75 mm Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Cgsbvsrm Rihsddrbot Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus Type: VT 6025 Heraeus Vacutherm vacuum drying oven Specification jacket heating VT 6025 Temperature (metric) 200 °C Dimensions, inside (W x D x H): 300 x 307 x 275 mm External dimensions (W x D x H): 480 x 450 x 600 mm Electrical requirements 230 V, 50/60 Hz Frequency 50/60 Hz Cgjbvdjrknagsdrbjt Capacity (metric) 25 l Heating jacket type without inert gas connection Voltage 230 V 1.3 kW, 5.9 A Weight: 58 kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), AdBlue refueling truck Cobvddjrp Enmsrbjgt Type: HT-Mobilus 200 AdBlue Whether in the automotive industry or directly in vehicle operation: with the MOBILUS-AdBlue, the safe refueling of your vehicles is possible in a safe and economically efficient manner. The MOBILUS AdBlue mobile refueling system complies with all relevant technical and legal regulations and is therefore often used in research and development projects. Convince yourself of the quality of this mobile urea refueling device. Technical data: Manufacturer: Rietbergwerke GmbH & C0. KG Type: HT-Mobilus 200 AdBlue Year of construction 2018 Technical data: Dimensions L x W x H: 142 x 73 x 135cm Empty weight: approx. 260kg Useful volume tank: approx. 175 liters Power supply: Connected load: 3.0KW Supply voltage: 400/230V / 50 HZ NPE Fuse protection: 16A Heating: Connected load: 4.0KW Supply voltage: 400V Delivery pump: Output: 0.75KW Supply voltage: 400V / 50 HZ Further technical data: Suction and circulation pump: Power: 0.4KW Supply voltage: 230V / 50 HZ Dispensing valve: Volume flow: max. 40l/min Operating pressure: 0.5 - 3.5 bar Control range: Volume flow: 3.5 l/min. - 45.0 l/min Temperature: 15°C - 45°C Frequency converter: 1,800 1/min BNC sockets: Output: 0 - 10V Operating temperature Operating temperature: max. 45°C Storage temperature: down to -30°C Materials Container: LDPE All other components in contact with the product: LDPE or stainless steel Transport trolley: Steel, powder-coated Seals / hoses: EPDM Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications) We will be happy to answer any further questions you may have on the phone.