Used Wacker Dps 3060 for sale (574)

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel E-Stand: 15 SN:C-WDU51955 , professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery according to photos Csb Ed Uji Edczolvogt

Condition: new, weight max. 0,25 t stroke 4000 mm Use as a stationary chain hoist painted in color RAL 5017 traffic blue Cjb Esh Un Hdjd Ulvegt Load capacity 250 kg Hook path 4000 mm Place of operation indoor operation Calculation basis FEM 9.901 Engine group 2m / M5 Operating voltage 3~50Hz 400V Direct control type of control Degree of protection IP55 Lifting, 2-stage (pole-switchable) 2 / 8 m/min Lifting power 0.09 / 0.35 kW Duty cycle 60% ED Circuits 360 c/h Standard equipment trolley electrics Solo trolley/hoist, ready-to-use, with power connector. Operation from the hallway using a pendant control The pendant control with 2-stage pushbuttons is attached to the chain hoist. Make: ABUS Length of control line, including pendant control: 3060 mm Control line calculation according to hook path overload protection Mechanical slip clutch as overload protection. The slip clutch is preset.

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, Lead Screw and Feed Rod Lathe Weiler Commodor Partially Overhauled Item number: 04-03-117 Manufacturer: Weiler Very good overall condition Machine partially overhauled Delivery time: on request – subject to prior sale Technical Details: Year of manufacture: approx. 1991 Dimensions (L x W x H): approx. 2200 x 1200 x 1800 mm Weight: approx. 1500 kg Digital Readout: 3-axis digital readout Sino New Capacity: Max. swing over bed: approx. Ø380 mm Max. swing over cross slide: approx. Ø190 mm Max. turning length: approx. 1000 mm Bar capacity: approx. Ø56 mm Spindle: Speed range: approx. 25–2000 rpm Spindle nose: A2-6 Drive power: approx. 4.0 kW Cgjb Ed Uljwf Dhpsvjt Automatic longitudinal and cross feeds: Feed range: approx. 0.011–0.80 mm/rev Thread Cutting Capabilities: Metric threads: 0.30–10 mm Inch threads: 80–2 3/4 TPI Diametral pitch threads: 80–5.5 DP Module threads: 0.2–5 Tailstock: Taper: MT4 Accessories: 3-axis digital readout SINO New 3-jaw chuck 200 mm New Quick-change toolholder size B + 1 insert Bed stop Work light New Coolant system New Complete documentation Emergency stop (E-Stop) Various chuck keys Machine feet Electrical chuck guard New Leadscrew and feed rod cover New Optional Accessories: Drill chuck Live center Collet chuck 173E Collet set 173E Additional quick-change toolholders Further accessories available on request. Price and further technical details available upon request.

Condition: good (used), mileage: 715,146 km, power: 355 kW (482.67 HP), first registration: 01/2018, fuel type: diesel, color: red, axle configuration: 4x2, tire size: 315/70R22,5, fuel: diesel, wheelbase: 3,800 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, parking heater, sleeping cabin, traction control, = Additional Options and Accessories = - Digital Tachograph - Tachograph (Control Unit) - Fixed - Sleeper Cab = Remarks = Number of axles: 2, Configuration: 4x2, Tare weight: 3060 kg, Gross weight: 19500 kg, Total fuel capacity: 845 liters, Fifth wheel height: 115 cm, Fifth wheel: Fixed, Number of locks: 1, Suspension type: Air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (Control Unit), Digital tachograph, Air conditioning, Auxiliary heating, Color: Red, Engine power: 355 kW (476 Hp), Euro: 6, Transmission type: AS-Tronic, Gears: 12, Power steering, ABS, ASR, Spare wheel, Spare wheel profile: 4 mm = Additional Information = Transmission Transmission: 12 gears, Automatic Axle Configuration Tire Size: 315/70R22.5 Brakes: Disc brakes Axle 1: Steered; Left tire profile: 6 mm; Right tire profile: 6 mm; Suspension: Leaf spring Axle 2: Dual tires; Left tire profile: 9 mm; Left tire profile: 9 mm; Right tire profile: 7 mm; Right tire profile: 9 mm Suspension: Air suspension Dimensions Dimensions (L x W x H): 626 x 255 x 354 cm Weight Unladen weight: 3,060 kg Payload: 16,440 kg Cgob Ejuxzyhsd Ulvet GVW: 19,500 kg Condition Technical condition: Good Visual condition: Good Damage: None Number of keys: 2 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, Year of construction: 2014, operating hours: 23,048 h, Functionality: fully functional, machine/vehicle number: 2600-102594, overall weight: 272 kg, load capacity: 20 kg, arm reach: 1,650 mm, This is an ABB IRB 2600-20/1.65 industrial robot Year of manufacture2014 We are also happy to offer you this robot refurbished! The robot includes the following options: RW Control module key RobotWare OS and English 644-2 German 709-x DeviceNet 709-1 Master/Slave Single 711-1 PROFIBUS DP m/s 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 614-1 FTP and NFS client 623-1 Multitasking Csb Estk R Dced Ulvogt

Condition: like new (used), Year of construction: 2024, Sheet width 3060 mm Sheet thickness 10 mm Backgauge - adjustable 1000 mm Cutting angle 1.5 ° Machine weight approx. 10500 kg Equipment/accessories: - CYBELEC Cybtouch touchscreen controller - NC controller for backgauge preselection, cutting gap adjustment, number of pieces, cutting length and material preselection - Sheet holding device - 1 side stop with scale, T-slot and tilting cam - 2 front support arms - Cutting line lighting - Cutting gap adjustment - Cutting length limiter - Hinged finger guard with limit switch Csb Ejvda Idjd Ulvegt - Motorized backgauge 1,000 mm travel - recirculating ball screws - Ball rollers in the table - foot switch

Condition: ready for operation (used), Siemens 6ES7318-3FL00-0AB0 Simatic CPU319F-3 PN/DP central processing unit SN: SC-K5MAB958, serial no. as per photo,used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Price please ask separately Csb Ed Ulsi Edtqjvogt

Condition: new, Year of construction: 2023, Unused, still in packaging SIMATIC S7-1500TF, CPU 1517TF-3 PN/DP, Central processing unit with work memory 3 MB for program and 8 MB for data, 1st interface: PROFINET IRT with 2-port switch, 2nd interface, Ethernet, 3rd interface, PROFIBUS, 2 ns bit performance, SIMATIC Memory Card required Cgob Ed Ulov Aannjvet We have 7 pieces in stock

Condition: ready for operation (used), Year of construction: 2008, ROVER A 3.30 K4 - CNC machining center Working area: X = 3060 mm; Y = 1260 mm; Z = 150 mm 9080345 Automatic lubrication system 6 ATS workpiece supports - L = 1200 mm - 18 module supports 6 stops with 115 mm stroke 6 stops with 15 mm stroke positioned 970 mm from the rear Side stops with 15 mm stroke, complete with pneumatic equipment Narrow part clamps 12 vacuum modules 132 x 146 x H48 mm 6 vacuum modules 132 x 75 x H48 mm Chip conveyor belt integrated into the machine bed Vacuum pump 250 m3/h Auxiliary vacuum system Flange for preparing a milling spindle for use with an angle unit 360° C-axis Drill head BH 21 L Turret tool magazine with 18 pockets Remote control functions CNC control XP600 Graphical operator interface BIESSEWORKS Air conditioning system Safety devices with two front safety mats and rear and side protective grilles 7350283| Division of the vacuum system into two independent work areas in X. Division of the pneumatic system into two work areas in X. 7300510| Chip conveyor belt integrated into the machine bed 50820 250 m3/h vacuum pump instead of the 90 m3/h pump WORK UNITS 7212013| 360° rotating work unit (C-axis) with gear drive, for machines with preparation 7212006| 12 KW (16.1 HP) electric spindle with HSK F63, air-cooled NC-Hops 4-axis machine license version 4 Ceb Edjwdnqxo Ulvsgt The tool shown is not included in the scope of delivery. Location: from customer location - Available: end of May 2025 -

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00367, arm reach: 3,060 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, payload: 185 kg, Refurbished FANUC R-2000iB/185L manufactured in 2011.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/185L Model Number: A05B-1329-B211 Csb Ejwc Uclod Ulvogt Year of Manufacture Robot: 2011.12 Warranty term (months): 12   Payload (kg): 185 Reach (mm): 3060 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1290   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.12 RCC Length (m): 14   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 12  

Condition: used, Year of construction: 2014, operating hours: 23,340 h, Functionality: fully functional, machine/vehicle number: 2600-102584, overall weight: 272 kg, load capacity: 20 kg, arm reach: 1,650 mm, This is an ABB IRB 2600-20/1.65 industrial robot Year of manufacture 2014 We are also happy to offer you this robot refurbished! The robot includes the following options: RW Control module key RobotWare OS and English 644-2 German 709-x DeviceNet 709-1 Master/Slave Single 711-1 PROFIBUS DP m/s Cob Eotk Rkled Ulvjgt 608-1 World Zones 611-1 Path Recovery 613-1 Collision Detection 614-1 FTP and NFS client 623-1 Multitasking

Condition: like new (used), Year of construction: 2024, DISPLAY MACHINE Cgeb Ejvbcwped Ulvet Pressure 200 t folding length 3060 mm stroke 350 mm throat 500 mm Equipment/accessories: - 7 axes: Y1, Y2, X1, R, Z1, Z2, X3 - X adjustment: 1000 mm plus 3 positions - ECO Energy Saving System: Hydraulic main motor runs continuously frequency-controlled, actually only when the press beam is moving. Approx. 80% energy saving, less wear, low oil heating - Cybelec Visitouch MX 3D - Fully dynamic active crowning - Hydraulic tool clamping for WILA punches - Hydraulic tool clamping for WILA dies

Condition: ready for operation (used), Rexroth MSK060C-0600-NN-S1-UP1-NNNN 3-phase synchronous PM motor, MNR: R911306055, SN 7260408026693, used, good condition, 100% functional, scope of delivery as per photos Cgsb Ed Uei D Nm Ajlvjt

Condition: used, TERMOTEK AG, P705-14974-6 Prisma Series DPSS Laser Chiller, Laser Cooling Model: P705-14974-6 Cgjb Eoc Ua R Aod Ulvjt Condition: Used

Condition: good (used), Slotting machine, slotting machine, high-speed planer, keywayseating machine, keyways slotting machine, keyways slotting tool, broaching machine, slotting machine, horizontal slotting machine, planing machine, high-power high-speed planer, metal planer/slotting machine Cgsb Edswck I Dj Ulvjt -Manufacturer: Klopp, horizontal slotting machine, power planer type DP AP -Stroke: 525 mm -Stroke rate: 16 - 164 1/min -Travel: X 500 mm Z 290 mm -Drive: 2.2 kW -Dimensions: 1810/1160/H1420 mm -Weight: 1130 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 224504 € 6 kW Wechseltisch 20 mm 15 mm 20 mm 10 mm 12 mm 3.048 x 1.530 mm 3060 mm 1530 mm 140 mm 3.048 x 1.524 mm 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm FIBER LASER HESSE HD-FO MADE BY DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The shuttle table is positioned at the front, making this system ideal for customers who do not have sufficient space for classic longitudinal positioning. Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Equipped according to CE guidelines Cebsvnv Syo Ed Ulvegt OPTION: suction unit with filter manually extendable table Further options as Durma cloud on request.

Condition: used, Year of construction: 1995, bore capacity in steel (diameter) 60 mm throat 400 mm bore stroke 240 mm 5 speeds 63 - 1250 U/min table-size 840 x 670 mm total power requirement 4 / 5,5 kW weight 1450 kg dimensions 1000 x 1400 x 2450 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore Cob Edswcg H Aj Ulvsgt * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central module E Stand 4 , software version V5.2.0 , serial no. according to photo as new, professionally tested, 100% functional, scope of supply according to photos Csb Ed Ulji Edt Hovogt

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 192788 € 3797.92 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 25,4 kW 3060 x 1525 mm 3060 mm 1525 mm 125 (275) mm 3048 x 1524 mm 240 kg/m² 2160 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/-0,05 mm 25 s FIBER LASER HESSE HD-FN MADE BY DURMA Cgob Edjvnv Nls Ulvot The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Equipped according to CE guidelines OPTION: exhaust unit with filters

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central module E Stand 3 , software version V5.3.0 , serial no. according to photo as new, professionally tested, 100% functional, scope of supply according to photos Csb Edoi Educs Ulvegt

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 201806 € 3868.78 € 4 kW Wechseltisch 20 mm 10 mm 12 mm 6 mm 10 mm Ceb Edovnv D Ne Ulvegt 27,5 kW 3060 x 1525 mm 3060 mm 1525 mm 125 (275) mm 3048 x 1524 mm 240 kg/m² 2160 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s FIBER LASER HESSE HD-FN MADE BY DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Equipped according to CE guidelines OPTION: Extraction with filter unit

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel E-Stand: 16 SN:C-W8L70663, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos Ceb Ed Ulsi Edcwevegt

Condition: ready for operation (used), Siemens 6AV6642-0DA01-1AX1 OP177B PN/DP T/K-6 CSTN SIMATIC Color Touch Panel E-Stand: 22 SN:C-F3E61224 , professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery according to photos Cobji Edcpo Ed Ulvjgt

Condition: ready for operation (used), Siemens 6ES7416-3FR05-0AB0 S7-400, CPU 416F-3 PN/DP central module E Stand 4 , software version V5.2.0 , serial no. according to photo as new, professionally tested, 100% functional, scope of supply according to photos Cgeb Edei Edt Re Ulvst

Condition: ready for operation (used), Rexroth MNR: 3 842 547 991 Motor 3842548302 SN:B17320370 + Shaft-mounted gearbox 3842503060 i= 15:1, used, good condition, 100% functional, scope of delivery as per photos Cgsb Ed Uewcahgelvst