Used Yuchai Yc15-8 for sale (14,681)

Year of construction: 2023, operating hours: 11 h, Condition: as good as new (ex-display), machine/vehicle number: MA0144_1922, Exhibit: Compressor Kaeser SX 8 (10 bar) with SIGMA CONTROL 2 Year of construction: 2023 Operating hours: 1 Bh Djloh Ey Rcoq U N Ufjkl Techn.Daten: Volume flow at 10 bar: 0.67 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Year of construction: 2021, Condition: new, modular drilling machine 8 automatic units Do: Go mad Model: Wu 3g 2C 3T Description: Producer GOMAD Benh7jc8jp Year of production 2021 Machine category Modular drilling machine location Gorzów Wlkp. Conditions of delivery OWN COLLECTION Shipping costs Client protection Dkelehara Dsq U N Ufel Start type to be agreed Description Remarks MODULAR MODULAR DRILL, TRAILER SLIDING BLADE, HALF-ADAPTATION WITH AIR PEDAL DRILL EQUIPMENT Year: 2021 THE NEW VERSATILE DRILLING MACHINE

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, MAG Mozart Zero H8 / Flat 8 (P7) round / flat wire enameling machine especially suitable for the production of copper wires Machine is as good as new! Production data (Cu) Diameter range: 1,500 - 2,500 mm / awg 14.5 - 10.0 Max. Production speed: 150 m/min Max. Input diameter: 5.50 mm Dslqjunyqio U N Ufskl Cross-section range: 0.80 - 8.00 mm² Nominal width range: 1.00 - 6.00 mm Nominal thickness range: 0.80 - 2.00 mm Speed range: 0 - 70.00 m/min Further information is available on request.

Condition: used, Year of construction: 1989, machine/vehicle number: 191, Prinzing RFZH-8 long seam pipe crimping machine Djleua Ernsq U N Ufokl effective length: 1020mm max. sheet thickness: 0.8mm steel Incl. wall mounting plate

Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: RT7000-0-08-0-0000-1, Hot runner controller RT7000 8-zone Type: RT7000-0-08-0-0000-1 Dkelq U N Uotz A Ecefel With color LCD and 7" touch control Outputs: 8x triac Inputs: 8x thermocouple Sensor plug: 1x HAN16A plug Heater plug: 1x HAN16A socket Sensor and heating separate Fieldbus: without Supply: 400VAC 3P 32 Display language in German and English For pin assignment, see enclosed documentation from page 15 onwards Dpbo8L INFO: New devices with a different number of zones available! If you are interested, we look forward to your inquiry!

Year of construction: 2000, Condition: excellent (used), A receiving conveyor with steel hinged plate belt. Was last fed with wheel loader and truck dump truck. Total length of construction: 9.6m Size of feeding hopper: 8,0 x 3,6m Width of conveyor at the bottom: 1,85 m max. width with drives: 3,2m width of conveyor belt: 1,3m Total height: 5,3m Belt speed: 0,05-0,29m/min. throughput line: 3 to 14 m³/min Gear motor belt SEW: 0,75 kW Speed: 0,2rpm Torque: 18000 Nm speed of reel shaft: 64 rpm Gear motor reel Flender: 7,5kW Dolq U Njiwxmbe Ufskl Total weight: approx. 20 tons With steep conveyor belt

Year of construction: 2018, operating hours: 0 h, Condition: as good as new (ex-display), new ALMIG GEAR 37 XP screw compressor Control: Aircontrol Basic Year: 2018 Specifications Type : GEAR XP 37 Operating pressure : 8 bar(ue) Delivery quantity, according to ISO 1217 Annex C : 6,30 m³/min Degree of protection / insulation class drive motor : IP 55/ISO F Nominal power drive motor : 37 kW Operating voltage / frequency : 400/50 V/Hz Dkolq Ujpyhmxj N Ufel Sound pressure level (DIN 45635 T.13) : 74 dB(A) Length : 1350 mm Width : 940 mm Height : 1680 mm Weight : 860 kg Compressed air connection : G 1 1/2" Visit our shop in Erlangen. We always have a large selection of new and used compressors in stock.

Condition: ready for operation (used), Year of construction: 1994, Operating voltage: 380V Frequency: 50Hz Weight: 7500 Current consumption: 172 A Year of manufacture: 1994 Calibration: Standard: 1350 x 2620 mm Cross-grinding: Dslq U N Uot Dk Siefekl Standard: 5400 x 150 mm Longitudinal grinding: Standard: 1350 x 2620 mm Machine dimensions Working width: 1300 mm

Condition: new, mileage: 20 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 4,332 mm, overall weight: 3,500 kg, empty load weight: 2,400 kg, maximum load weight: 1,100 kg, operation weight: 2,500 kg, first registration: 12/2024, next inspection (TÜV): 12/2026, loading space length: 4,200 mm, loading space width: 2,200 mm, loading space height: 2,300 mm, loading space volume: 18 m³, fuel tank capacity: 105 l, emission class: euro6, color: white, suspension: steel, tire size: 225/65 R16 C, number of seats: 3, Year of construction: 2024, fuel: diesel, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, second-hand vehicle warranty, soot filter, spoiler, summer tires, traction control, truck registration, EU vehicle with factory warranty. Tarpaulin vehicle Load compartment length - 4200 mm Load compartment width - 2200 mm Load compartment height - 2300 mm Sliding tarpaulin - left, Euro pallet spaces - 8, Payload approx. 1100 kg, Cruise control, start & stop, air conditioning, on-board computer, 105 liter tank, wooden floor, EFH, central locking with FB, indicators in exterior mirrors, Widened exterior mirrors, Dkslsibu U Dsq U N Ufjl Reinforced suspension, Spare wheel - Available in approx. 3-4 weeks. - Delivery, leasing or financing possible. - Contact us: Auto-Wardenga Irenäus Wardenga

Condition: new, fetra, trolley, steerable, 8 pieces for sale Trolley for easy and safe transportation of machines and other heavy objects. Sturdy welded steel construction, with handles made of round steel, powder-coated blue RAL 5007. With swivel support plate and drawbar. Support plate with anti-slip rubber pad. With 1 towing eye on the drawbar. Large steel castors, ball bearing mounted. Quantity: 8 pieces (can also be purchased individually) Technical details: Total load capacity: 12000 kg Overall length: 640 mm Total width: 566 mm Overall height: 115 mm Load surface length: 400 mm Loading area width: 220 mm Number of axles: 2 Number of castors: 8 Wheel size: 83 x 85 Release: Steel Dslq U Neuqap Ds Ufjkl Note: Drawbar length: 1075 mm Weight: 66 kg

Year of construction: 1971, Condition: good (used), 3-roll bending machine - Working length: 2550 mm - Largest sheet thickness: 8 mm (Cr-Ni) 10mm (Steel) - Upper roll diameter: 220 mm - Bottom roll diameter: 220 mm - Total length: 5100mm - Total height: 1250mm - 3 shaft stubs to accommodate profile tooling - Rollers are adjustable for conical bending - Machines in fully functional condition. - A frequency converter has been retrofitted to the machine for the infinitely variable speed adjustment of the roller speed. Dkjlq U Nol Axfzo Ufel You are welcome to try the machine at our factory! Defects: * Damage to the paintwork all around

Condition: new, Year of construction: 2024, Reinforcement machine FOX CNC 4-8 Vending machine for the production of stirrups from 4 to 8 mm from smooth and ribbed rod. Technical specification: ✅Dimensions: 2550×820×1630 mm ✅Weight: 950 kg ✅Bending : - From two circles at the same time: Ø4 to Ø6 mm - From one circle: Ø8 mm ✅Types of Rods: Smooth and ribbed ✅Bending angle: Maximum 180 degrees ✅Retail Length: - Maximum: 1000 mm - Minimum: 60 mm ✅Speed : - Material travel: up to 75 m/min - Bending: up to 120 degrees/s ✅Performance: Up to 1000 units/hour ✅Power of Engines: 12 kW ✅Energy consumption: 3 kW/h ✅Control: Color touch screen FOX CNC 4-8 stirrup bending machine – Benefits for your company: ✅Different Rod Diameters: The device supports bending from two coils simultaneously (from Ø4 to Ø6 mm) and from one circle (Ø8 mm), which allows you to work with a variety of materials and adapt to the needs of different projects. ✅Bending Different Types of Rods: The ability to bend both smooth and ribbed rods increases the range of applications of the machine. ✅Bending accuracy: The maximum bending angle of 180 degrees and the bending speed of up to 120 degrees/s ensure precise and fast forming of elements. ✅Production efficiency: The production capacity of up to 1000 pieces per hour significantly increases work efficiency and allows you to execute large orders in short time. ✅Low Energy Consumption: Energy consumption of 3 kW/h with a total engine power of 12 kW ensures economical operation of the device. Dkelq U Nennz A Ej Ufol ✅Optimization of Work: The ability to program different bending details and control via a color touch screen allow you to easily and quickly adapt the machine to your specific production needs. ✅High Quality: Made from high-quality materials, this device ensures long-lasting and trouble-free operation, minimizing maintenance and repair costs. ✅Security: Built-in safety systems provide additional protection for operators, allowing the machine to stop immediately in emergency situations. ✅Optimal Size: The dimensions of 2550×820×1630 mm and the weight of 950 kg make the device space-saving and easy to install even in limited space. ✅Ease of movement: The light weight makes it easy to transport and relocate the machine in the production plant.

Year of construction: 2021, operating hours: 0 h, Condition: new, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) Dkslqog N Tkfs U N Ufjl include dryer include Ecodrain include 2 Filters include 270 liter tank galvanized Year 2021 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT 8 XP 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 64 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Weight: 448 kg Compressed air connection: G 3/4 "

Year of construction: 2002, Condition: excellent (used), Functionality: fully functional, For sale 2 Katres Drying kilns with boiler 600 kw. One kiln is 7 m wide, second is 8 m wide. Fully opertional, good condition. Heating boiler is working with sawdust and chips. In set is all pumps and pipes. Dslq U N Uotpqqcefekl

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Dslq Ujq H H Ruo N Ufokl Technical data attached to the photos.

Condition: excellent (used), Functionality: fully functional, mileage: 220,000 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 2 axles, wheelbase: 4,200 mm, overall weight: 7,490 kg, empty load weight: 5,400 kg, maximum load weight: 2,050 kg, operation weight: 7,490 kg, first registration: 06/2019, next inspection (TÜV): 06/2025, loading space length: 6,100 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: steel-air, brakes: engine braking, tire size: 215/75 R 17,5, number of previous owners: 1, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, tail-lift, traction control, trailer coupling, MAN 8.190 TGL COMPLETE WITH SLIDING FRAME AND 10 Q.LI DAUTEL TAIL LIFT VERY GOOD MECHANICS AND BODYWORK Djlqevdc Sls U N Ufjkl

Condition: good (used), Year of construction: 2012, used in a good condition. refurbished Dkjlqjp Aukho U N Ufol

Year of construction: 2000, Condition: used, COMEC Clamping Machine mod. ST/8 2P-2500, year 2000 (CE) Dkelorkcr Hoq U N Ufsl Useful working dimensions cm. 250 x 250

Year of construction: 2022, Condition: as good as new (ex-display), 7.5 kW screw compressor Almig (10 bar) Type: BELT 8 XP Year of construction: 2022 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 990 liters / min Installed motor power: 7.5 kW Dkjlq U N Usiqypwjfel Protection class / insulation class drive motor: IP 55/ ISO F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 63 Compressed air connection: G 3/4 " Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 275 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, wheel width: 380 mm, TECHNICAL DESCRIPTION: Linear axes: – Radial slide (X-axis) – Tangential slide (Y-axis) – Axial slide (Z-axis) - Tailstock (Z4-axis) Rotary axes: – Milling head (A-axis) – Workpiece table (C-axis) – Swivel gripper for automatic workpiece change (E-axis) Spindle: – Milling cutter (S-Spindle) TECHNICAL DATA: – Control: SIEMENS SINUMERIK 840D Gear hob: – Largest permissible tip diameter: 130 mm – Greatest length (depending on milling arbor diameter): 220 mm - the max diameter of gear 380mm (depending of diameter of Hob) MACHINE Milling arbors: – Diameter: 40 mm – Acquisition cone: Steep cone ISO 40 Sledding trails: – Radial (X-axis): 185 mm – Tangential (Y-axis): 200 mm – Axial (Z-axis): 250 mm Dkjlq U Novdnm Us Ufel Largest milling head swivel angle: – Direction +A: 35° – Direction -A: 45° Workpiece table: – Outer diameter: 300 mm – Boron: 80 mm Speeds Rapid traverse/Feeds: – X-axis: 10.000 mm/min – Y and Z axis: 5.000 mm/min Drehzahlen: – Tool: 90 – 900 rpm – Workpiece table: 1 – 55 rpm Electrical equipment: – Operating voltage: 380/400 V – Supply voltage: 230 V – Control voltage: 24 V – Frequency: 60/50 Hz – Connected load of the machine: 48 kVA – Cable cross section: 25 mm2 – Protection: 100 A Overall dimensions of the machine: – Length/Width/Height: 6.435 x 4.930 x 3.210 mm – Machine weight approx: 11500 kg EQUIPMENT: – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace – Documentation Notes: Machine with Load conveyor Machine in excellent condition Complete maintenance 12/2024 Machine with Dialog Program

Condition: as good as new (ex-display), Functionality: fully functional, mileage: 197,000 km, power: 140 kW (190.35 HP), first registration: 06/2019, overall weight: 7,490 kg, fuel type: diesel, color: white, axle configuration: 2 axles, operation weight: 7,490 kg, maximum load weight: 2,230 kg, empty load weight: 5,260 kg, tire size: 215/75 R17,5, next inspection (TÜV): 02/2025, fuel: diesel, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space width: 2,450 mm, loading space length: 6,100 mm, loading space height: 2,400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, onboard computer, spoiler, tail-lift, traction control, MAN 8.190 COMPLETE WITH VAN AND 10 Q.LI HINGED TAIL LIFT. EXCELLENT MECHANICS AND BODYWORK Delq Uovc Hcfe N Ufokl

Year of construction: 2021, Condition: excellent (used), used 7.5 kW screw compressor ALMIG with integrated refrigeration dryer and 270 liter compressed air tank and time-controlled steam trap and Controller Air Control mini Type: COMBI 8/270D Year of construction: 2021 Hours: 2600 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 1020 liters / min Installed motor power: 7.5 kW Protection class / insulation class drive motor: IP 55 /ISO F Operating voltage: 400V ~ 50 Hz Dkelq U Neiqym Hs Ufjl Sound pressure level (EN ISO 2151): dB (A) 64 Compressed air connection: G 3/4 " Length: 1180 mm Width: 770 mm Height: 1680 mm Weight: 460 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Year of construction: 2022, Condition: as good as new (ex-display), machine/vehicle number: MA0166, New 7,5 kW screw compressor ALMIG with integrated refrigeration dryer and time-controlled steam trap Type: COMBI 8 D Year of construction: 2022 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 1020 liters / min Installed motor power: 7,5 kW Dkelq U N Usiqymmefel Protection class / insulation class drive motor: IP 55 F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 64 Compressed air connection: G 3/4 " Length: 1180 mm Width: 770 mm Height: 1128 mm Weight: 345 kg Drive: V-belt drive Visit our shop. We always have a large selection of new and used compressors in stock!

Year of construction: 2021, Condition: as good as new (ex-display), Screw compressor ALMIG GEAR XP 75 - 8 bar (air cooled) Year 2021 / IMMEDIATELY AVAILABLE! Technical specifications Type: GEAR XP 75 Operating pressure: 8 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 12,80 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 75 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 76 dB (A) Length: 2180 mm Dsleigahhoq U N Ufekl Width: 1330 mm Height: 1850 mm Weight: 2025 kg Compressed air connection: G 2 "

Year of construction: 2018, operating hours: 1 h, Condition: new, machine/vehicle number: COMBI 8-10, Screw compressor ALMIG COMBI 8 with 10 bar (air cooled) Year 2018 / IMMEDIATELY AVAILABLE! Dkolq Uedr Dq Ij N Ufel Technical specifications Type: COMBI 8 Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1,02 m³ / min Degree of protection / insulation class Drive motor: IP 55 / F Rated power drive motor: 7.5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 64 dB (A) Length: 1180 mm Width: 770 mm Height: 1,128 mm Weight: 310 kg Compressed air connection: G 3/4 "