Used Pottinger Novacat 265 H Ed for sale (117,471)

Condition: ready for operation (used), 11x DRK 26 H from Erwin Stelzer Warburg agitators with emergency stop switch. 8x with propeller, 3x without propeller. Product data: 1 Kw 220/380V 5.9/3.4 AMP. 920 U.p.m. 2,7 HP 0,64 cos Insulation class E Shaft length 400mm Shaft diameter 30mm Total length 800mm Dsln Ugjfr Ianou Nekl blade diameter 240mm Connection: DN125

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, Functionality: fully functional, machine/vehicle number: 190332, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 Dkjln Ugegrzh Eou Nel 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, mileage: 2,362 km, power: 135 kW (183.55 HP), fuel type: electric, gearing type: other, axle configuration: 1 axle, first registration: 04/2024, next inspection (TÜV): 04/2026, color: white, driver cabin: other, suspension: other, brakes: other, mast type: standard, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, sliding door, truck registration, ... Subject to alterations, prior sale and errors excepted Deljq H Rq Asn Ugu Njkl

Condition: used, Year of construction: 2009, pressure 40 t stroke 4 - 100 mm no. of strokes 130 /min throat 230 mm dayligth 475 mm table surface area 650 x 460 mm hole in the table 205 x 165 mm table height over floor 710 - 950 mm table adjustable 240 mm ram surface 435 x 240 mm Dkelnjvzxpnj Ugu Njl ram adjustment 85 mm power requirement 5,0 kW Weight 2,6 t dimensions of the machine ca. 1,2 x 1,7 x 2,3 m x m x m permitted for manual loading according to the CE-norm with motor, pneumatic hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, motoric centralized lubrication, adjustable table, two-hand and foot operation

Condition: used, color: yellow, Year of construction: 2012, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 1.995 kg Dkoln Uowb A Tpsgu Nsl Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.700 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 820 m Transport dimensions (LxWxH): 6,2x1,6x2,16 Latest inspection: 2025-01-13 Production country: UK Additional information Please contact Vink Machinery for more information Niftylift 170 HE * 2012 * Battery and 230 Volt drive * 17 meter working height * 8.2 meter horizontal reach * 200 kg lifting capacity * 1995 kg own weight * Inspection until January 2026 * Including documents

Condition: excellent (used), Fully functional veneer press from Höfer Panels: 250x125cm Dksln Ugswh S Tlou Nsl Heating plates: 2x 7.5kW

Condition: ready for operation (used), 35x DRK 36 H from Erwin Stelzer Warburg Mixers with emergency stop switch. product data: 2 Kw 220/380V 10/5.8 AMP. 940 rpm. 2.7 HP 0,72 cos Insulation class E Dsln Ujfr H Ttjgu Nokl Wavelength 400mm shaft diameter 35mm Total length 840mm Wing diameter 320mm Flange diameter 300mm

Condition: like new (used), Year of construction: 2007, operating hours: 47,800 h, Functionality: fully functional, machine/vehicle number: 203241, Used injection molding machine - New screw with original Arburg Multilift H The machine has a complete history with all major repairs and component replacements such as the screw, cylinder, etc. (In addition, the annual oil and filter changes, etc., were of course performed.) See document for download Manufacturer: Arburg Type: 470C 1500-350 Dsljvhb Iyon Ugu Njkl Year of manufacture: December 2007 Machine No. 203241 Control: Selogica Operating hours: 47,800 h Continuous maintenance by manufacturer Clamping unit Clamping force: 1500 kN/150 tons Tie-bar spacing: 470 x 470 mm Mold clamping platens: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Injection volume: 145 cc Injection weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras Multilift H Handling interface Core puller - Available immediately from our Hanover warehouse, free on load or free to your door with freight reimbursement - Functionally tested (guaranteed functionality until first commissioning)

Condition: used, Year of construction: 2019, operating hours: 6,340 h, Equipment: ABS, Volvo L 70 C Wheel Loader The machine is in very good condition. - Quick coupler - Air conditioning - Scale - BSS - Reversible fan - Heated air seat Dkoln Uguev T Hxbj Nel - Rotating beacon - Central lubrication - Radio - AdBlue (Degreased Air Filter) - Diesel particulate filter - 20.5R25 tires - 15.5t - 6300 BS

Condition: used, Year of construction: 1989, Pressure 080 t throat 300 mm stroke 8 - 140 mm no. of strokes 60 / 90 /min distance table/ram, max. stroke up, adjustment up 420 mm table surface area 800 x 600 mm hole in the table 330 x 230 mm table adjustable 230 mm table height over floor 750 - 980 mm ram surface 600 x 240 mm ram adjustment 100 mm power capacity 4,5 / 6,9 kW Dsln Ugevuuavju Nekl Weight 5,5 t Dimensions (WxDxH) 1,4 x 2,5 x 2,6 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor with 2 speeds, hydraulic clutch/brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, manual central lubrication, two-hand and foot operation press can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 2011, Ref. no.: 17514 Hersteller: BILLION Type: H 80-50 Select Year of construction: 2011 Clamping unit Clamping force: 50 ton Opening stroke: 250 mm Distance between tie bars: 350 x 300 mm Mould height min.: 150 mm Djlnowgpw Se Ugu Nokl Mould height max.: 400 mm Platen size (h x v): 490 x 440 mm Injection unit Screw diameter: 25 mm Injection volume: 39 cm³ Shot weight: 35 g Injection pressure: 2040 bar Measurements and weight Dimensions: 3,7 x 1,4 x 1,8 m Machine weight: 3200 kg Additional information & extras Hot runner systems: 6 pcs.

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, fuel: electricity, overall weight: 67 kg, COLD WATER WASHER KARCHER HD 10/23-4S The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and adjustable nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 230bar and 1000l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply: 3 phases - 400 V - 50 Hz Pumping capacity (l/h): 1000 Working pressure (bar): 230 Maximum pressure (bar): 253 Connection power (kW): 7.8 Weight (kg): 67 Dimensions (length x width x height) (mm): 560 x 500 x 1090 Hose length (m): 10 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW adjustable nozzle Water filter and GEKa claw connectors - FREE Deln Ugujwh Saxs Nskl KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: refurbished (used), Year of construction: 1973, Functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Dksln Ugujtqf Dbj Njl Test books, tools, drawings available!

Condition: excellent (used), Functionality: fully functional, Year of construction: 2004, operating hours: 6,089 h, load capacity: 5,500 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 2,850 mm, motor manufacturer: Perkins, gearing type: automatic, fork length: 1,200 mm, tire condition: 70 %, front tire size: 300x15, rear tire size: 7,00-12, overall weight: 7,980 kg, empty load weight: 5,500 kg, total height: 2,850 mm, total length: 3,300 mm, total width: 1,400 mm, maximum load weight: 5,000 kg, fuel: diesel, Equipment: lighting, pallet forks, sideshift, Forkpositioner // Full cabin We sell forklifts after a full service. Prepared for the end user. We can arrange transport within Europe and around the world. ===== WhatsApp in English between 9.00 and 21.00 WhatsApp auf Deutsch zwischen 9 Uhr und 21 Uhr. WhatsApp en français entre 9 heures et 21 heures. WhatsApp in French language from 9:00 to 21:00. ===== We are a company specializing in 4-way forklifts, side loaders and counterbalance forklifts. We have qualified professionals with over 20 years of experience in the forklift and construction machinery industry. We have the best mechanics in the forklifts industry in Poland, we have many satisfied customers throughout Europe. We are also a manufacturer of EPAL EUR pallets and are known for our excellent quality and on-time delivery. Before delivery to the customer, we test the equipment and do a full service inspection. All necessary repairs are carried out. The customer receives the forklift ready to work. In Poland, at the customer's request, we can carry out the acceptance of the equipment by the State Office of Technical Inspection. The main mission of our company is to satisfy the customer and solve his logistical problems. We know how to prepare the machine well and make the customer satisfied and recommend us to other customers. Doln Ugowh Axrsu Nskl We invite you to contact us and make use of our services. You need a forklift supplier? Contact us

Condition: used, Year of construction: 2016, operating hours: 9,800 h, Equipment: all wheel drive, Volvo L 180 H wheel loader * Own weight 28.47 t * Tires 26.5 R25 L3 * Bucket width 3.2 m * Bucket capacity 4.6 m³ * Bucket capacity min. 4.6 m³ * Steering typeKL * Transport length 7.19 m * Transport width 2.96 m * Transport height 3.58 m * Driving speed 38 km/h * Dumping height max. 4.47 m * Outside turning radius 14.8 m * Lifting capacity 224.9 kN * SeriesL * vo * Engine typeD 13 J Deln Ugujvxzlgj Njkl * Engine power 246 kW * Displacement 12.8 l * Speed at max. torque 1000 rpm * Emission level Tier 4 f

Condition: used, Year of construction: 1999, material width 360 mm coil weight 3,0 t coil internal diameter 380 - 520 mm coil external diameter 1500 mm Dkeln Ugovut R Hou Nsl weight 1,4 t dimensions (WxDxH) 1,8 x 1,8 x 1,7 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate can be inspected in running condition in our warehouse

Condition: ready for operation (used), Year of construction: 2017, A Barberan roller coating machine is available. Nominal width: 1600mm, working width: 1450mm, working height: 1200mm, working height adjustment: +/-20mm, diameter of application, dosing and smoothing rollers: 248mm, heating cartridge output: 2x9.6kW, max. rolling temperature: 165°C, workpiece thickness range: 6mm-80mm, including a drum melting unit SM-Klebetechnik GX75. Documentation available. On-site inspection is possible. Doln Uowg Ez Tjgu Nekl

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 550 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 94 kg, warranty duration: 6 months, temperature: 155 °C, HOT WATER WASHER KARCHER HDS 558 C Eco The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient single-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 140bar and 550l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: HDS 558 C Eco Power supply (V): 230 Efficiency (l/h): 290-550 Pressure (bar): 30-140 Temperature max. (°C): 80/155 Connection power (kW): 3.2 Fuel tank (l): 16 Fuel consumption (kg/h): 3 Weight (kg): 94 Dimensions (length x width x height) (mm): 940 x 600 x 740 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Dkslswh Rnhsn Ugu Nsl Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make that the machine is user-friendly and easy to service The RM110 water softener tank prevents corrosion and scale build-up inside the heating coil and other pipes.

Condition: good (used), Year of construction: 1989, Functionality: fully functional, Vollmer automatic sharpener for sharpening carbide-tipped circular saw blades on the front and back in one setting, well-maintained and regularly serviced. Blade diameters from 80-810 mm. Wet grinding. Dslnowcxhxs Ugu Nskl Includes a very comprehensive spare parts package.

Condition: like new (used), Functionality: fully functional, Year of construction: 2021, Essentially consisting of: Feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening plant, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet installed in container, storage silo, dust atomization system Dkjlsq Tcmvjn Ugu Nol

Condition: good (used), Year of construction: 2009, Year of Manufacture: 2009 Total Impressions: 33 million Technical Specifications: Printing Units: 4 Color + Coating Maximum sheet size: 520 x 750 mm Minimum sheet size: 200 x 296 mm Maximum Printing Speed: 17,000 sheets/hour Features and Equipment: High Pile with inline coating Harris & Bruno HP ProDesk iS-3.0 Ghz, 4 GB, 2 Pcs Monitor, SCIS, Com Port Techkon Expresso 3.6, Hardware Dongle for Spectro Drive LaB measurement, CIP3 Station, SCCS, STP 2007 Automatic blanket washing Remote Control Console CIP 3 make ready SPC semi automatic plate changing Dkoljv E Hdhen Ugu Nel Automatic blanket wash.up device Automatic in rollers wash-up device Double diameter cylinders Alcohol dampening Baldwin refrigeration Powder sprayer IR dryer High pile delivery Extended delivery Availability: Location: Germany In production Available: Immediately

Condition: used, Year of construction: 1971, material width 300 mm coil weight 2,0 t material thickness 1,0 - 5,0 mm coil internal diameter 440 - 520 mm coil external diameter 1320 mm no. of straightening rolls 6 straightening roll diameter 70 mm number of draw-in rolls 2 diameter of draw-in rolls 70 mm power requirement 1,1 kW weight of decoiler 2,0 t dimensions decoiler (WxDxH) 2,0 x 2,0 x 1,7 mm weight of straightening machine 1,3 t Dkeln Uguevut Dto Nol dimensions straightener (WxDxH) 2,7 x 1,3 x 2,4 mm Straightening machine RM-S 300 with infinitely variable drive, pneumatic intermittent lifting, hydraulic inlet table, bending roll, alligator opening, coil loop control Decoiler H 2 with auxiliary drive, pneumatic snubber roll, hydraulic expansion, manually shiftable as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: excellent (used), 067 USED Spiral cooler 2400 pcs/h. TECHNICAL DATA: - max. capacity: 2400 pcs/h, - cooling time: 45-60 min, - number of levels: 16. SPIRAL/ROOM DIMENSIONS (in cm): - width 820, - length 1300, - height 430. Dkjlowd It Tjn Ugu Nsl EQUIPMENT: - conveyor belt feeding the spiral, - 2 cooling spirals with accessories, fans, ventilation ducts, housing, - conveyor belt transporting bread approx. 40-50 m., - control system. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 90 kg, warranty duration: 6 months, temperature: 155 °C, HOT WATER WASHER KARCHER HDS 697 Ci The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 160 bar and 700 l/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: MODEL: HDS 697 Ci Supply voltage [V]: 400 ~3 phases Pressing capacity [l/h]: 700 Working pressure [bar]: 160 Max. heating temperature [°C]: 85/150 Connection power [kW]: 4.5 Hose length [m]: 10 Fuel tank [l]: 15 Weight [kg]: 90 Dimensions (length x width x height): 1020 mm x 580 mm x 730 mm Dkolnowh Rb Us Ugu Nol EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m NEW 25° power nozzle Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very legible and intuitive control panel Simple design and good access to individual components under the housing makes the machine user-friendly and easy to service

Condition: repair required (used), Year of construction: 2017, high-pressure casting seat, used to make magnesium castings, which includes a group of devices, the most important of which are: 1. RAUCH heating furnace, year of manufacture 2016 x 2 2. REGLOPLAST heating and cooling device, man. 2017 x 2 3. SPECIMA SM 2 biaxial injector, year of manufacture 2017 x 2 4. Trimming press, man. 1986 (after reconstruction in 2017) x 2 5. KUKA robot, year of production 2017 x 2 6. BUHLER GDM-H-630-B injection molding machine, man. 1997, (after reconstruction in 2017) Deln Ugenmyqpeu Nekl 7. BUHLER GDM-H-400 8. 4 x Filters KMA