Used Pottinger Novacat 265 H Ed for sale (117,478)

Condition: used, Year of construction: 2010, operating hours: 17,000 h, lifting height: 4,520 mm, fuel type: diesel, mast type: duplex, fork length: 1,150 mm, total height: 2,890 mm, total length: 2,800 mm, total width: 1,180 mm, color: other, Empty weight: 3.705 kg Lifting capacity: 2.500 kg - Lifting capacity: 2500kg - Lifting height: 4520mm Delowckwroimwq Nekl - Number of wheels: 4 Wheels - Overhead clearance: 2890mm - Attachment: 4th valve to fork carriage, Side-shift - Options: Half cabin, Work lights - Fork length: 1150mm - Mast: Duplex - Year: 2010 - Documentation available: No - CE mark available: Yes - Operating hours: 17000 - Motor brand: Deutz - Drive: Diesel - Transport dimensions: 2800mm x 1180mm x 2890mm (l x w x h) - Transport weight [kg]: 3705kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: new, fuel type: diesel, color: yellow, first registration: 12/2022, Year of construction: 2022, operating hours: 1,800 h, Equipment: air conditioning, cabin, trailer coupling, Model year: 2023 Field of application: Construction General condition: very good Dkelimsv Hnc Ijwq Nel Technical condition: very good Visual appearance: very good Price: On request

Condition: not inspected (used), Year of construction: 2000, Functionality: unexamined, Straight-cut band saw, cutting capacity up to 450 mm wide Dolimwqjwhmpbj Nokl The machine was part-exchanged and reportedly worked until the customer's last use. "This is a used machine whose functionality has not been tested. The sale is made without any warranty."

Condition: new, Functionality: fully functional, power: 3.5 kW (4.76 HP), fuel type: diesel, color: yellow, overall weight: 160 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson DPU 2540 H vibratory plate compactor, - NEW - ! Weight 160 kg, Frequency 90 Hz, Centrifugal force 25 kN, 400 mm working width, Hatz 1B20 diesel engine with 3.5 kW, Dkolimewg Rx Rowq Njl Other sizes also available! Machine location: Warehouse, D-46514 Schermbeck.

Condition: good (used), mileage: 426,394 km, power: 265 kW (360.30 HP), first registration: 01/2010, fuel type: diesel, color: yellow, axle configuration: 6x4, fuel: diesel, wheelbase: 5,550 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, Year of construction: 2010, Equipment: ABS, air conditioning, crane, cruise control, trailer coupling, = Other options and accessories = - Electrically adjustable exterior mirrors - Speed limiter - Fog lights - Sunshade - Toolbox - Power take-off (PTO) - Tow bar = Other information = Technical information Number of cylinders: 6 Engine displacement: 10,518 cc Gearbox Gearbox: ZF, 16 gears, manual Axle configuration Front axle: Max. axle load: 9000 kg; Steered; Tire profile left: 60%; Tire profile right: 60%; Suspension: Leaf spring Rear axle 1: Twin tires; Max. axle load: 11500 kg; Tire profile left inside: 60%; Tire profile left outside: 60%; Tire profile right inside: 60%; Tire profile right outside: 60%; Suspension: Air suspension Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steered; Tire profile left: 60%; Tire profile right: 60%; Suspension: hydraulic suspension Dimensions Dimensions (L x W): 808 x 253 cm Dkslimwewg Avhsq Nol Weights Empty weight: 13,235 kg Payload: 14,765 kg GVW: 28,000 kg Functional Crane: Palfinger PK 12001 B Rotor and Graber, year of manufacture 2009, behind the cabin Brand of bodywork: HTS Container cable system/ 3 side tipper Pump: Yes Condition Technical condition: good Visual condition: good Damage: none More information Contact Gerrit Haverhoek for more information.

Condition: used, color: yellow, Year of construction: 2008, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 2.000 kg Functional Lifting capacity: 200 kg Working height: 1.720 cm Other information Delivery terms: EXW Max. horizontal reach: 870 m Dkjlswcd Sceimwq Njl Transport dimensions (LxWxH): 6,25x1,6x2,16 Production country: UK Additional information Please contact Vink Machinery for more information Niftylift 170 HE * 2008 * Battery and 230 Volt drive * 17 meter working height * 8.7 meter horizontal reach * 200 kg lifting capacity * 2000 kg own weight * Inspection until January 2026 * Including documents

Condition: used, Functionality: fully functional, machine/vehicle number: #1039, Year of construction: 2019, operating hours: 983 h, load capacity: 3,500 kg, lifting height: 12,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,420 mm, fork length: 1,200 mm, engine type: Deutz TD 3.6 L ( 75 PS ) Stage 5, drive type: Diesel, Diesel forklift Chassis number: #1039 Mast type: Telescopic Transmission: hydrostatic Technical condition: very good Sideshift, Djlswg Ng Teimwq Nekl 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, exterior mirrors, windshield wipers, 20 KM/H, CE certificate

Condition: used, Functionality: fully functional, Year of construction: 2023, operating hours: 302 h, load capacity: 5,000 kg, lifting height: 3,770 mm, free lift: 1,170 mm, fuel type: diesel, mast type: triplex, construction height: 2,220 mm, power: 55 kW (74.78 HP), fork length: 2,400 mm, engine type: 4-Zyl. Doosan-Diesel, drive type: Diesel, Diesel forklift Load centre of gravity: 600 Mast type: Triplex Gearbox: Hydrostatic Condition: As good as new Technical condition: very good Front tyres type: Superelastic Rear tyres type: Superelastic Description: AS GOOD AS NEW !!! with AIR CONDITION !!! NEW CONDITION !!! - with AIR-CONDITION !!! Side shift, 3rd valve, 4th valve, rear work light, front work light, full cabin, air conditioning, full free lift, CE certificate, safety light, Dkjlevmuqrsimwq Nsl

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Delimwewhvrrjq Nekl Includes control cabinet, joining module (including sensor as shown), and monitor

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 400 Rotor width (mm) 1000 Drive capacity (hp) 40 Rotor blades (pieces) 3(5) x 1 Stator knives (rows) 2 Hopper opening (mm) 490 x 990 Total length (mm) 1348 Length machine (mm) 1120 Dkelimwsp N Dv Hoq Njl Width total (mm) 1577 Width machine (mm) 1216 Height (mm) 1914

Year of construction: 2009, Condition: excellent (used), Pasteur 500l / h gas Delimwqegigryj Njkl overhauled automatic temperature control

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 milling machine / machining center Control: Sinumerik 840 D powerline spindle chuck: HSK-A63 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 630 mm table size Y: 630 mm max. workpiece weight: 800 kg tool changer: 180 - time input Power : 30 kW Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Chip conveyor Belt filter system Cooling unit Without pallet changer Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dkslswczqcjimwq Nsl Dynamic package

Condition: used, Functionality: fully functional, machine/vehicle number: 1702, Year of construction: 2024, load capacity: 8,000 kg, lifting height: 5,500 mm, free lift: 1,945 mm, fuel type: electric, mast type: triplex, construction height: 3,220 mm, engine type: Elektro/ Inkl., drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 1702 Mast type: Triplex Gearbox: Impulse control Technical condition: normal 3rd valve, 4th valve, rear working lights, front working lights, roof cover, heating, load protection grille, full cab, impulse control, safety light, interior mirror, exterior mirror, Dolowg I Uieimwq Nekl Load center of gravity at 900mm

Condition: used, Functionality: fully functional, Year of construction: 2019, operating hours: 1,592 h, load capacity: 5,000 kg, lifting height: 3,945 mm, free lift: 1,210 mm, fuel type: diesel, mast type: triplex, construction height: 2,159 mm, power: 55 kW (74.78 HP), fork length: 2,400 mm, engine type: 4-Zyl. VW-Diesel, drive type: Diesel, Diesel forklift Load center: 600 Mast type: Triplex Doljuahr Rjimwq Nokl Condition: Reconditioned with warranty Technical condition: very good Front tires type: Superelastic Rear tires type: Superelastic Description: TOP CONDITION !!! Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, STVZO, full cab, air conditioning, full free lift, CE certificate, non-creeping tires, interior mirror, LED,

Condition: new, power: 137 kW (186.27 HP), fuel type: diesel, color: yellow, first registration: 12/2019, Year of construction: 2019, operating hours: 12,353 h, Field of application: Construction Top speed: 50 km/h CE mark: yes General condition: good Djlimjv Hg Dkowq Nokl Technical condition: good Visual appearance: good Price: On request Please contact Erwin for more information

Year of construction: 2024, Condition: new, Functionality: fully functional, faceplate diameter: 650 mm, height (extended): 1,060 mm, height (retracted): 711 mm, height adjustment type: hydraulic, maximum load: 1,200 kg, welding current at 100% duty cycle: 300 A, The positioner can also be hired (also as a trial hire) Maximum load: 1.2 tonnes Rotation speed: infinitely variable approx. 0.07 - 1.6 rpm Face plate size: 650 mm diameter with T-slots Faceplate height (horizontal): 711-1,060 mm Hydraulically height-adjustable for more ergonomic working Control: wired manual control bulb and foot switch Subject to prior sale and hire Dkelimwsrkmngoq Njl

Condition: used, color: red, Hose diameter: 82 Hose length: 265 m Deliswgpn Demwq Nokl

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 milling machine / machining center Control: Sinumerik 840D powerline spindle chuck: HSK-A 63 spindle revolutions: 10000 rpm max. workpiece weight: 800 kg tool changer: 240 - time Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Belt filter system Cooling unit Rotoclear Dkjlimwowczp Eoq Nsl Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dynamic package

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure Dkolimwsvt Dwbjq Nsl - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, Year of construction: 1996, pressure 16 t stroke 4 - 70 mm no. of strokes 140 /min throat 200 mm dayligth 365 mm table surface area 420 x 390 mm hole in the table 160 x 120 mm Djlimwjwc U Iuoq Nskl table height over floor 650 - 840 mm table adjustable 190 mm ram surface 160 x 125 mm ram adjustment 80 mm power requirement 2,2 kW Weight 1,4 t dimensions (WxDxH) 1,0 x 1,6 x 2,0 m permitted for manual loading according to the CE-norm with motor, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, motorized central lubrication, two-hand operation

Condition: excellent (used), Lifting unit Make Römheld type H 51 R 52 3507 Lifting unit lifting force 4 kn 400 kilo Dolsih R Hbsimwq Nskl Lifting path 300 mm The clamping device can be rotated 180 degrees in the horizontal axis. 4 x by 90 degrees in the vertical axis

Condition: new, Functionality: fully functional, fuel type: diesel, overall weight: 13,500 kg, Year of construction: 2023, machine/vehicle number: VCE0L60HP00015582*, Volvo wheel loader type L60H newly purchased, not used !! Sale on behalf of customer !!! Djlimwqst Ecwys Nokl

Condition: used, mileage: 600,699 km, Year of construction: 1990, Serial number: YS2RH6X2Z0114xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19850 Specifications - 1990 model - 600,699 km - Not Eu-approved - Manual transmission - Repair item - Tires (see pictures) - 6x2 - Front suspension: steel - Rear suspension: steel - Bogie lift Dkelimwjv U Svhsq Nol - Hiab crane - 14 t/m Hiab - 2 Hydraulic extensions - 2 Manual extensions - Length on plan: 6,465 m - Ready for delivery Description: We have a 1990 Scania R143 H 6x2 Timber truck Repair item w/ 14t/m Hiab crane aggregate. The car is being sold as repair item as it is not Eu-approved and is therefore in uncertain condition. Both car and crane work, but some additional costs must be considered. Ready for delivery. Km: 600699 Technical approved: no Own weight: 10400 Total Weight: 27500 Payload: 17025 Width: 250 Length: 896 Gearbox: Manual

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 milling machine / machining center Control: Sinumerik 840D powerline spindle chuck: HSK-A63 Dkjlimowczpxowq Njl spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 630 mm table size Y: 630 mm max. workpiece weight: 800 kg tool changer: 180 - time input Power : 30 kW Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Chip conveyor Belt filter system Cooling unit Without pallet changer Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dynamic package

Condition: new, Functionality: fully functional, power: 5.4 kW (7.34 HP), fuel type: diesel, color: yellow, overall weight: 181 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson vibratory plate DPU 3050 H, - NEW - ! Weight 181 kg, frequency 90 Hz, centrifugal force 30 kN, 500 mm working width, Hatz diesel engine 1B30 with 5.4 kW, Dslimwqjwgw Rge Nokl Other sizes also available! Location of the machine warehouse D-46514 Schermbeck.