Used Pottinger Novacat 265 H Ed for sale (117,609)

Condition: ready for operation (used), total height: 4,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), load capacity: 400,000 kg, net weight: 85,000 kg, total depth: 5,900 mm, Gantry straightening press400 ton For straightening shafts, steels castings, rolled products, open-die forgings, flat steel but also pressing in/out bearings, bushes, shrink rings,... 14 individual counter pressure cylinders in the table - 3 ton cap per cilinder - 100 mm stroke per cilinder - 300 kg/cm² Dcjln Towhrwkeqn Esg Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: good (used), mileage: 960,714 km, power: 382 kW (519.37 HP), first registration: 08/2017, fuel type: diesel, color: other, axle configuration: 4x2, tire size: 385/65R22,5, fuel: diesel, wheelbase: 3,750 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, parking heater, traction control, = Additional Options and Accessories = - 2nd Diesel Tank - Digital Tachograph - Tachograph (Control Unit) - Fixed - High Roof - Alloy Wheels - Parking Air Conditioning - Auxiliary Braking System = Remarks = Number of axles: 2, Configuration: 4x2, Tare Weight: 9073 kg, Gross Weight: 19000 kg, Total Tank Capacity: 1200 liters, 2nd Diesel Tank, Fifth Wheel Height: 116 cm, Fifth Wheel: Fixed, Number of Locks: 1, Alloy Wheels, Suspension Type: Full Air, Cabin Type: High Roof, Cruise Control, Tachograph (Control Unit), Digital Tachograph, Air Conditioning, Parking Air Conditioning, Auxiliary Heating, Color: Multicolored, Engine Power: 382 kW (512 Hp), Euro: 6, Transmission Type: Opti-Cruise, Gears: 12, Auxiliary Braking System, Retarder, Brand: Scania, Power steering, ABS, ASR, V8 = Further information = Transmission Transmission: 12-speed, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Left tire profile: 4 mm; Right tire profile: 5 mm Axle 2: Tire size: 315/70R22.5; Dual tires; Left tire profile inside: 3 mm; Left tire profile outside: 7 mm; Right tire profile inside: 4 mm Right outer tire tread: 7 mm Dimensions Dimensions (L x W x H): 606 x 255 x 398 cm Weight Curb weight: 9,073 kg Payload: 9,927 kg GVW: 19,000 kg Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing inventory of 1,200 used trucks, tractors, and trailers. Our selection includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing market • Recognizable quality • A good price • Competent sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Dolnswhuwtj Tqn Eecg Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: good (used), power: 273 kW (371.18 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 13,956 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL220HJ00002729 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 35.500 kg Dcolswhfw Rjn Tqn Eog Functional Lifting capacity: 10.080 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Tyre brand: Tianli Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,89x3,15x3,71 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 2003, operating hours: 5,291 h, 2003 | Haulotte | Haulotte H 21 Tx (21m) | Used Telescopic Boom Lift | 5291 hours Dsln Towh Dixsqn Eecg 📍Location: France, Les Chères 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 13000 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 36 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine has been around for years but works well. Maximum working height: 20.6 m ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "38040 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: used, Functionality: fully functional, machine/vehicle number: H2X392J00858, Year of construction: 2018, operating hours: 4,926 h, load capacity: 2,500 kg, lifting height: 5,510 mm, free lift: 1,420 mm, mast type: triplex, construction height: 2,430 mm, fork length: 2,400 mm, drive type: Treibgas, LPG forklift Fahrgestellnummer: H2X392J00858 Mast type: Triplex Djln Tqneuhxd Te Eecg Technical condition: good Description: Linde H 25 T-02 No.: M0580 Year of construction: 2018 Operating hours: 4,926 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We still have a large selection of other devices on site. Sideshift, 3rd valve,

Condition: used, Functionality: fully functional, Year of construction: 2022, operating hours: 330 h, load capacity: 2,000 kg, lifting height: 1,600 mm, free lift: 172 mm, fuel type: electric, mast type: standard, construction height: 1,335 mm, fork length: 1,200 mm, total length: 1,600 mm, drive type: Elektro, construction width: 790 mm, net weight: 1,350 kg, High lift truck Load center: 600 Mast type: Standard Technical condition: very good Front tires Type: Polyurethane Front tires Condition: 100% Rear tires Type: Polyurethane Dsln Tqeqynq Rsn Escg Rear tires Condition: 100% Battery Volt: 24V Battery Ah: 300Ah Battery year of manufacture: 2022 Description: Used unit reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). With power steering. Pulse control, initial lift, CE certificate,

Condition: ready for operation (used), passage width: 4,200 mm, net weight: 40,000 kg, This portalpress is suitable for the deformation/deforming of steel plates. For the width and thickness of the plates the general rule applies: 10 ton per mm platethickness. Has been fully reconditionned Cap: 600 Ton Max opening: 1600 mm stroke: 600 mm Table: 2000 x 1000 mm Between coloms: 4200 mm Closing speed: 55 mm/sec working speed: 10 mm/sec return speed: 130 mm/sec plate roll press - plate roller press - Plattenroll Presse - strechting - bending - joggling - flanging - Kesselboden - Fond elliptique / Fonds elliptiques / Dish-end forming press / Tankbödenherstellung / Kümpelpressen / Bördelmaschinen / Bodenrand-Sickenmaschinen Capacity: 600 Ton Max ram adjustment: 600 mm Drawningspeed: 55 mm/sec Workingspeed: 5 à 10 mm/sec Returningspeed: 130 mm/sec Max distance between table - ram: 1600 mm Dimensions of the table: 2000 x 1000 mm Dcjln Tewhr Dqsqn Esg Electric motor (power): 45 pk

Condition: excellent (used), Year of construction: 2016, pressure 400 t Dcoln Tqnsu N Iy Nj Eog chamfer lenght 6100 mm distance between columns 5050 mm stroke 600 mm distance between table / ram 870 mm throat 600 mm table width 300 mm closing speed 100 mm/sec working feed 11 mm/sec return speed 120 mm/sec total power requirement 37 kW weight of the machine ca. 45 t

Condition: good (used), power: 245 kW (333.11 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 5,243 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL180HEF0008019 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Dceln Tqnowhfwwo Eeg Top speed: 38 km/h Empty weight: 29.700 kg Functional Lifting capacity: 8.710 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 9,98x3,96x3,58 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), Smoke extraction hood with burner, gas furnace, laboratory furnace, kiln -Smoke extraction hood: with burner, without extraction fan -Interior: W/D/H 690/400/580 mm -Accessories: see photos -Dimensions: 730/425/H1015 mm Dceln Tjwhbgzsqn Eeg -Weight: 71 kg

Year of construction: 2005, Condition: like new (used), machine/vehicle number: Serienr. 1-04, 252, APV/SPX Homogenizer for milk capacity 25.000 L APV Type: R132Q-85,595 Dcsln Tqefg Tcajn Esg Serienr. 1-04, 252 From 2005 Capacity 25.000 l/h Low press 60 bar Good working condition

Condition: used, Functionality: fully functional, Year of construction: 2015, operating hours: 2,590 h, load capacity: 1,600 kg, lifting height: 8,500 mm, free lift: 2,900 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, fork length: 1,150 mm, total length: 2,450 mm, drive type: Elektro, construction width: 1,270 mm, net weight: 4,500 kg, Reach truck Load center of gravity: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tires type: polyurethane Front tires condition: 100% Rear tires type: polyurethane Dslneu Rgy Re Tqn Ejcg Rear tires condition: 100% Battery voltage: 48V Battery Ah: 775Ah Battery year of manufacture: 2023 Description: Used device reconditioned by Toyota including new inspection, new battery (!) and new approval according to FEM (ex UVV). Side shift, 3rd valve, impulse control, full free lift, CE certificate, Tipping cabin, lifting height indicator, scale

Condition: used, Year of construction: 1992, max. wheel diameter 160 mm gear width 710 mm max. module 4,5 min. module 0,5 milling spindle speeds (infinitely variable) 70 - 400 U/min Djln Tqnevz Edro Eecg centre distance 800 mm total power requirement 11 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,6 x 3,0 x 2,0 m 2-cut-cycle, shifting, very nice condition. Change gears, arbors.

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Dcjlnov Rpr Se Tqn Eeg Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: like new (used), operating hours: 83,500 h, machine/vehicle number: IntNr231113, IntNo. 231113 Goods tariff number 8457 10 10 00 Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-station plate changer and 4-station pallet station NC rotary table 360° Precision package Tool holders Steep taper: HST 100* DIN 69893 Form A Tool magazine positions chain: 1 x 90 & 1 x 90 Chip conveyor including belt filter from Knoll BILUTEC Air Technology – Filtration Systems Machine number: 28840003102 Year of manufacture: 2001 Control system: Siemens Sinumerik 840D Operating hours: approx. 83,500 h Specifications Technical data Main drive • Direct drive via liquid-cooled, variable-speed induction motor • Speed ranges, continuously programmable: o Operating mode: 0 to 6,000 rpm o Setup mode: 0 to 800 rpm o Manual Interventions: 0 to 5,000 rpm • Torque: o S1 – 100% duty cycle: max. 300 Nm (220 lb-ft) o S6 – 40% duty cycle: max. 440 Nm (322 lb-ft) • Power: o S1 – 100% duty cycle: 25 kW (33 hp) o S6 – 40% duty cycle: 37 kW (49 hp) Feed drive • 3-phase AC synchronous servo motors • Feed rate of the X/Y/Z axes: o Continuously programmable: 1 to 40,000 mm/min (0.04 to 1,575 in/min) o Rapid traverse: 40,000 mm/min (1,575 in/min) o Set-up mode: 1 to 2,000 mm/min (0.04 to 79 in/min) o Manual interventions: 1 to 5,000 mm/min (0.04 to 200 in/min) • Feed force: o X/Z axes (100% duty cycle): max. 15,000 N (3,372 lb) o Y-axis (100% duty cycle): max. 10,000 N (2,255 lb) Measuring system • Resolution, smallest input step: o X/Y/Z axes: 0.001 mm (0.0004 in) • Position tolerance (according to VDI/DGQ 3441): o Direct measurement of the X/Y/Z axes: 0.010 mm (0.004 in) o Direct measurement of the B-axis: 14 arc seconds Rotary table • Speed: max. 19 rpm • Clamping force of the pallet: 120,000 N (27,000 lb) • Tilting moment: max. 16,000 Nm (3,520 lb-ft) • Tangential moment: max. 4,800 Nm (3,523 lb-ft) Pallet • Quantity: 1 • Size: 500 x 630 mm (19.7 x 24.8 in) • Permissible load per pallet: o When using 1 pallet: max. 500 kg (1,102 lb) o When using 2 pallets: max. 900 kg (1,984 lb) • T-slots: o Quantity x width: 4 x 14 mm (0.16 x 0.55 in) • Guide slot: o Quantity x width: 1 x 14 mm (0.04 x 0.55 in) Working area • Travel range: o Tool diameter greater than 200 mm (7.87 in): o Tool diameter less than 200 mm (7.87 in): o Asymmetric travel range: o X-axis: 800 mm (31.5 in) o X-axis: mm (+19.7/-15.7 in)  Y-axis: 710 mm (27.9 in)  Z-axis: 710 mm (27.9 in)  B-axis: 360° Dolnjwh R T Re Tqn Eocg Machine size: 4,600 x 2,400 x 2,700 mm Machine weight: 10,500 kg 1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg 1x Control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg 1x Chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg 2x Pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg 1x Euro pallet with hydraulic unit 1x Euro pallet with some accessories 1x Euro pallet with covers: L = 200 cm x W = 100 cm 1x Filter holder: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg 1x Tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg 1x rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg Delivery time at short notice upon request. The machine can be inspected by appointment. Subject to changes and errors in the technical specifications and information, as well as prior sale! Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-fold plate changer and

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Clamping force 500 tons Dceln Tqnewhr I Nj Ejg Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Year of construction: 1997, operating hours: 30,251 h, lifting height: 4,440 mm, fuel type: diesel, mast type: duplex, fork length: 1,170 mm, total height: 3,000 mm, total length: 3,100 mm, total width: 1,500 mm, color: other, Empty weight: 7.150 kg Lifting capacity: 4.500 kg Fork dimensions: 1.170 x 1.100 mm - Lifting capacity: 4500kg - Lifting height: 4440mm - Maximum fork width: 1100mm - Number of wheels: 4 Wheels - Overhead clearance: 3000mm - Attachment: Side-shift, 4th valve to fork carriage - Options: License Plate, Verwarming, Full cabin, Air tires, Work lights - Fork length: 1170mm - Free lift: 0mm - Mast: Duplex - Year: 1997 - Documentation available: No - CE mark available: Yes - Serial number: 352H02000345 Deln Tqewg Ai Ijn Escg - Operating hours: 30251 - Drive: Diesel - Transport dimensions: 3100mm x 1500mm x 3000mm (l x w x h) - Transport weight [kg]: 7150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Functionality: fully functional, Year of construction: 2017, operating hours: 520 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,560 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork length: 1,200 mm, total length: 2,280 mm, drive type: Elektro, construction width: 1,195 mm, net weight: 5,200 kg, Electric 4-wheel forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tires Type: Superelastic Front tires Condition: 100% Rear tires Type: Superelastic Deln Tqnovdgfco Ejcg Rear tires Condition: 100% Battery Volt: 80V Battery Ah: 775Ah Battery manufacturer: Factory overhauled in 2023 Battery year of manufacture: 2023 Description: Used device reconditioned by Toyota incl. new inspection and new acceptance according to FEM (ex UVV). Incl. brand-new ELM fork positioner suspended with fork brackets with lower rollers, cap. 2500 kg at 500 mm, width 1150 mm, fork brackets ISO 2328 cl. 2, opening range Y0Y1 mm: 211-911 mm, sideshift valve type FD 24 3, color RAL 9005, suspension ISO 2328 cl. 2 Sideshift valve, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, impulse control, full free lift, CE certificate,

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Dolnewhf Hfs Tqn Eecg Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: good (used), Year of construction: 2003, Machining Center Manufacturer: Matsuura Type: H Plus 405 PC6 Year of Manufacture: 2003 CNC Control: Fanuc G-Tech 16i Dcoln Tqjltlx Njn Eeg Travel: X/Y/Z: 600 x 600 x 600 mm Table Size: 500 x 500 mm 6-Station Pallet Changer 120-Station Tool Magazine 4th Axis Knoll High-Pressure System Internal Coolant 70 bar 080525ä

Condition: used, Year of construction: 2015, Working dimension X: 3.090 mm Working dimension Y: 1.530 mm Working dimension Z: 85 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 11 Linear tool changer: Yes Vertical drilling spindles: 8 Gantry machine: beidseitig angetriebene Gantrymaschine Automatic central lubrication: Yes Machine table: Matrix table Tool charge measurement: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Safety device: Light barrier Control: PC control Handheld terminal: Yes Dceln Tqnowh Rnuo Ejg Software: FORMAT 4 WOOD FLASH Conformity marking: CE mark Total connection: 25 kW

Condition: good (used), power: 309 kW (420.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 12,452 h, Equipment: air conditioning, General information Field of application: Construction Dcslowgnzvsn Tqn Eeg Serial number: VCEL260HL00001089 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 39.000 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 70 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,47x2,4x3,72 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), Year of construction: 2012, Ref. -No.: 10537 Manufacturer: HELLER Type: H 4000 Year of construction: 2012 Type of control: CNC Control: FANUC 31i Storage location: Halberstadt Country of origin: Germany X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 1.400 kg Max. Tool Length: 410 mm Max. Tool Diameter: 188 mm Max. Size Of Workpiece Lxwxh: 900 x 1000 mm Tool Taper: HSK 63A Tool Piece Magazine With: 489 Pcs./pcs. Spindle Speed: 16.000 RPM Max. Torque: 180 Nm Rapid Travel X/Y/Z: 90.000 mm / min pallet change time: 200 s Dcjln Tqnewhdzbe Eog Further information: These are 2x HELLER 4000 incl. FASTEMS SYSTEMS with 32 pallets. Machines are currently in production and can be viewed by appointment.

Condition: used, Year of construction: 1990, fuel type: diesel, lifting capacity 2,5 Tonnen Doln Tqewhq Arsn Ejcg Luftreifen height of stroke 4400 mm 1200 mm defekt mindestens 3000 St

Year of construction: 2002, Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 20159   Specifications: Model year: 2002 Weight: 1110 kg Dimensions: 323 cm Ready for delivery Dcjln Tqnewdu A Ie Eeg Description: This is a 2002 GMI LDA 265 S plow in good condition . The plow is ready for delivery , so it can be put into use quickly.