Used Toplift-Staja Ts 1857 for sale (86,743)

Condition: excellent (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: approx. 53 m Fsbvrtov Sqlcjrqogb -Number: 4x wire rope available -Price: per roll -also other crane ropes: available -Transport dimensions: Ø 750 x 560 mm -Weight: 187 kg/piece

Condition: used, mileage: 244,195 km, power: 129 kW (175.39 HP), gearing type: mechanical, first registration: 02/2018, next inspection (TÜV): 01/2024, Equipment: had accident, tail-lift, Canter Fuso 9C18 Duonic Blue Tec * First registered: February 8, 2018 * Manual transmission * Estimated mileage: 244,195 km * 129 kW * 2998 cc * Unladen weight in kg: 5690 * Gross vehicle weight in kg: 7490 * Wheelbase: 4200 mm * Diesel OSB * Without refrigeration unit * Cruise control Fgebvrtrswc Hnteqsb * Radio * Tail lift * Not roadworthy * All information without guarantee

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Room volume: 3300 liters Data for temperature tests: Temperature range: -70°C to +150°C Spatial temperature deviation: ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the chamber: ± 0.8 - 1 K Temperature change rate (with test sample: approx. 20 kg aluminum/plastic) Heating in the range: -40°C to +90°C: 4 K/min linear Cooling in the range: +90°C to -40°C: 4 K/min linear Data for climate tests: Temperature range: +10 to +95°C Humidity range: 10% RH up to 95% RH Temperature fluctuation over time ± 0.2 to -0.5 K Fsbvrsvclugotrqogb Humidity fluctuation over time ± 1% RH to ± 3% RH Dew point range +5°C to +88°C Mechanical load data: Test chamber floor 150 kg Maximum chamber floor load 250 kg Test chamber dimensions: Width 2000 mm x Depth 1150 mm x Height 1510 mm External dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating data: Test chamber lighting: 12 V, 20 W halogen bulb Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated power 32 kW, Rated current 59 A External control via the RS 232 interface is also possible. Refrigerant: R404A / R23 Test chamber weight approx. 800 kg Machine set weight approx. 850 kg Weight: 1650 kg For your safety, please note the following information! The following procedures are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Condition Used Stock Number 413107 This listing is for a Malvern Instruments Multisizer APA2000 Particle Counter  Fgsbvewb Nv Rjrtrqjb

Condition: excellent (used), MITSUBISHI MV2400S Advance Type V2 Wire EDM – Year of construction: 2016 • CNC control: Mitsubishi Advance Type V2 • Axis travels: X = 600 mm, Y = 400 mm, Z = 310 mm • Additional axes: U = ±75 mm, V = ±75 mm • Maximum workpiece dimensions: 1050 x 820 x 305 mm • Maximum workpiece weight: 800 kg • Table dimensions: 880 x 530 mm • Wire diameter: 0.05 to 0.3 mm (standard 0.25 mm) • Wire feed speed: up to 420 mm²/min • Rapid feed speed: 13 m/min • Mechanical wire tension: 0.5 to 25 N • Maximum inclination angle: ±15° (with 150 mm plate thickness) • Filtering and dielectric system: • Processing tank volume: 740 litres • Filtering flow rate: 60 L/min • Filtering accuracy: 3 µm • Filters: 2 paper filters (4 optional) • Deioniser: 10 litres, with ion exchange resin • Dielectric liquid resistivity range: from 0.5 to 100 x 10⁴ Ωcm • Power supply: • 3 phases, 200/220V, 50/60 Hz • Compressed air required: 0.5 MPa • Machine dimensions (LxWxH): 2140 x 2320 x 2150 mm • Weight: 3500 kg • Notes: Machine in perfect working order, visible in operation on request Fobvewdrfyertrqegb

Condition: good (used), Year of construction: 2003, Functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, power: 4.3 kW (5.85 HP), nominal voltage: 400 V, high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: Fgjbvsrfyrpertrqeb length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Condition: excellent (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope Fobvrtrsvzp Sasqegb -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: 60 m -Quantity: 1x wire rope available -Shipping/Price: complete -also other crane ropes: available -Transport dimensions: Ø 820 x 620 mm -Weight: 196 kg

Condition: used, Year of construction: 2009, operating hours: 10,360 h, * Tilting bucket * Backhoe bucket * Dozer blade * Central lubrication system * Air conditioning * Power: 90 kW * Total weight: 16,000 kg Fgjbvrowcvucstrqob -----Internal vehicle number: 10890----Subject to errors and prior sale.

Condition: excellent (used), Vötsch Type: VC 7330/S Water-cooled climate chamber Room volume: 3300 liters Data for temperature tests: Temperature range: -70°C to +180°C Spatial temperature deviation: ± 1 to ± 2 K (corresponds to temperature gradient) (2 to 4) Temperature fluctuation over time in the center of the usable space: ± 0.5 - 1 K Temperature change rate (according to IEC 60068-3-5) Heating: 1.5 K/min Cooling: 1.5 K/min Data for climate tests: Temperature range: +10 to +90°C Humidity range: 10% RH up to 98% RH Temperature fluctuation over time ± 0.2 to -0.5 K Humidity fluctuation over time ± 1% RH to ± 3% RH Dew point range +5°C to +89°C Mechanical load data: of the test chamber floor 150 kg Maximum chamber floor load 250 kg Dimensions of the test chamber: Width 2000 mm x Depth 1150 mm x Height 1510 mm External dimensions: Width 4000 mm x Depth 1450 mm x Height 2100 mm Operating data: Fjbvrou Au Eretrqegb Test chamber lighting: Halogen bulb 12 V, 20 W Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power 15 kW, Rated current 34 A External control via the RS 232 interface is of course possible. Refrigerant: R404A / R23 Weight: 1550 kg For your safety, the following information is provided as a buyer! The following steps are performed on our chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2006, volume flow: 80 m³/h, Flow rate 80 m3/h Febvrtrjwc T Rzjqegb Compressed and suction air 0.60/0.70 4.8 kW

Condition: used, mileage: 171,770 km, power: 92 kW (125.09 HP), first registration: 06/2004, fuel type: diesel, color: black, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, Year of construction: 2004, NUMBER PLATE: GS717AP Fgjbvrteuznrvjrqjb TITLE: MITSUBISHI CANTER 3.0 HOOK-AND-LOOP WITH FRONT LEAF AND REAR LEAF REF: 24C32 YEAR: 06/2004 HORSEPOWER: 125 DISPLACEMENT: 2977 EURO: 3 KM: 171770 GEARBOX: manual DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2500 TOWING: yes ORIGIN: abroad CABIN: short and low NO. OF SEATS: 3 LOAD CAPACITY: 1300 kg - TRACTOR: 3500 kg at full load - TRACTOR + TRAILER: 7000 kg at full load TYPE OF EQUIPMENT: hook lift MOD. SCARRABILE: PRISMAG 3 TON EXTENSION: no SWING: no ROLLER: no ADR: no ACCESSORIES: - hook height 90/92 cm - aisle width 88 cm - cases our ref. 24-U-30 and 24-U-35 MAX BODY WIDTH: 3.15 m + 0.14 m TOTAL LENGTH: 4.60 m TOTAL LENGTH WITH CONTAINER: 5.00 m REFURBISHED: yes OVERHAULED: 10/04/2024 TYRES: 100% NEW PRICE: €29,500.00 + VAT - including two 24-U-30 and 24-U-35 bodiesThe prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, Year of construction: 1998, volume flow: 300 m³/h, Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Fgebvret Uzqkstrqeb Operating pressure: 0.2 Bar Motor: 7.5 KW Capacity: 300 m3/h Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm

Condition: good (used), Year of construction: 2010, max. size 23 x 32 cm age 2010 banding device cross strapping computer control with monitor Fobveu S Agtertrqegb for paper and film band max. pile height 30 cm mobile sub-frame Delivery time: immediately

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 07D1M931, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, Economical production by combining high cutting speed with high precision and low wear. The MV-S series with non-contact and therefore wear-free direct tube drive opens a new chapter in EDM machining. Lower wire consumption and lower energy consumption provide economic benefits that pay off year after year. Reliable, human-free operation is ensured by patented wire threading, works around the clock. Table construction - movable Travel X (mm) - 400 Travel Y (mm) - 300 Travel Z (mm) - 220 Travel U/V (mm) - 120/120 Max. workpiece size (mm) - 810 x 700 x 200 Fsbvrewffx Astrqegb Max. cutting angle (degrees) - ±30°/ 87mm, ±15°/ 200 mm Wires used (mm) - 0.1-0.3 Machine weight (kg) - 2700

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 9809133, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 625 mm, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Type: 4-axis horizontal machining center Control: CNC Yasnac J300M Travel paths X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 625 mm Pallet system Pallet size: 500 × 500 mm Number of pallets: 2 Pallet indexing angle: 0.001° Tool changer Tool positions: 120 Tool interface: ISO 40 Spindle Spindle speed: 15,000 rpm Cooling: Internal cooling through spindle Feed rates Rapid traverse: 24 m/min Working feed: 1 – 10,000 mm/min Fsbvrtswc R E Nsrqjgb MACHINE DETAILS Power supply: 380 V / 50 Hz / 67 kVA Machine weight: 11.5 t EQUIPMENT - Twin pallet system - Yasnac J300M CNC control system - Internal spindle cooling - Large tool changer (120 positions) - ISO 40 tool holder

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2002, operating hours: 6,100 h, The excavator is currently on one of our construction sites in Schlüchtern and can be viewed there. It has been in reliable use there for almost 4 weeks. A KOMATSU PW170 ES mobile excavator with around 6100 operating hours is for sale here. As we only need one tracked excavator in the future, the mobile excavator is being sold. The Komatsu can be tested on site on the railing. All functions are available. Only the light switch on the steering wheel is broken but it works! Fsbvrewc Itqjtrqogb The digging and clearing bucket is not included in the delivery. A bucket (see picture 1) is included.

Condition: excellent (used), Vötsch Type: VCS³ 7027-10 Vötsch Climatic Test Chamber, Water-Cooled With a temperature change rate of 10 K/min Temperature test data: Temperature range -72°C to +180°C Temperature deviation over time in the center of the work space ± 0.3 K to ± 0.5 K Temperature deviation over space ± 0.5 K to ± 2.0 K Temperature change rate Heating: 10 K/min Cooling: 14.5 K/min Climatic test data: Temperature range +10°C to +95°C (Extended climatic range: 2°C/95% RH, controlled for a maximum of 2 hours) Temperature deviation over time in the center of the work space ± 0.2 K to ± 0.3 K Temperature deviation over space ± 0.5 K to ± 1.0 K Humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters Side opening 50 mm Side opening 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on-site: 63 A slow-blow Refrigerant R404A/R-23 Weight approx. 835 kg For your safety, please note the following information as a buyer! Febsv R Ty Tevrtrqjgb The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: like new (used), Functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Fgobvrtrevbdyfeqob Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: new, Year of construction: 2024, 1290 is a professional laser cutter for serious manufacturing. This model features a lifting table, giving you additional product options. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 LT can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. The lifting table function allows lowering the working area up to 16 mm, so the rotary device may be installed to diversify your production. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 LT characteristics Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Fgjbjiim T Aevrtrqeb Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2005, Functionality: fully functional, overall weight: 250 kg, volume flow: 300 m³/h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Vacuum pump, Rietschle SMV 300m3/h, 0.2bar /ct1928/ Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Operating pressure: 200Mbar Motor: 7.5 KW Capacity: 300 m3/h Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm Fgobvrtret A Ukasqsb

Condition: new, Year of construction: 2024, That’s a double-productive CNC laser machine. There's no magic, just two laser heads. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Two laser heads function simultaneously at a minimum distance of 130 mm apart. Each has its own 100-120W laser tube, making it possible to work at fast rates. Wattsan 1610 works with wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. Wattsan 1610 Duos LT characteristics Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1600 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1750 x 810 mm Fobvrteh Ucxderqogb Weight: 457 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), Year of construction: 2007, volume flow: 42 m³/h, power: 1.5 kW (2.04 HP), Rietschle VLT 40 vacuum pump 42m3/h 150mbar ELMO Rietschle vacuum pump PICO 40m3/h for sale year of construction 2007 Mains voltage: 230/400 V 50 Hz 5.2/3 A IP55 Total: 1,5 kW Fjbvrtjrhwprerqjgb Speed: 1420 rpm Weight: 52 kg Air delivery: 42/50 m3/h

Condition: excellent (used), Year of construction: 2007, gardner Denver VLT 40 oil-free vacuum pump, 150 mbar, 1.5 kW / Made by Gardner Denver Type: VLT 40 (01) Year of production: 2007 Power: 1.5 kW Speed: 1420 rpm Fobeh I T Rasvrtrqogb Weight: 52 kg Air transport: 42/50 m3 / h Max vacuum: 150 mbar IP55

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, throat depth: 180 mm, pressing force: 5 t, table width: 450 mm, table length: 320 mm, operating speed: 300 mm/s, overall weight: 270 kg, type of input current: three-phase, oil tank capacity: 9 l, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Fjbovbdpyovrtrqsgb Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: used, Plastic grid conveyor belt, paddle application belt Easy-to-install curved application track, small space-consuming conveyor belt. Height: 2000 mm Distance between arches: 2260 mm Belt width: 195 mm Track width: 195 mm Engine: Febsugl Trovrtrqjgb Lens EN60034 Power: 0.37 kW Current: 0.95-1.6 A Rotation: 1410 r/min Output speed: 56.3 r/min IP55