Used Ciata E-230 for sale (14,255)

Year of construction: 2024, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Cgjlijv Iqwdotdx Net Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: reconditioned (used), Year of construction: 2018, Functionality: fully functional, warranty duration: 6 months, DGUV certified until: 05/2027, year of last overhaul: 2025, Spiral kneader dough machine Turri model: ISFE 120 very robust technology! Mobile kneading machine with 2 brakes 2 LED timers, 2 gears, temperature display flour dust hood, Stainless steel boiler and spiral for max. 120 kg of dough, Boiler left/right running Connection: 400V, 13.5 Amp., 32A-CEE plug Dimensions: 790 x 1300 x 1300 mm, WxDxH Used machine overhauled with 6 month warranty Cgslitdopwfi Hjx Not More TOP bakery machines in stock!

Condition: good (used), mileage: 210,641 km, power: 172 kW (233.85 HP), first registration: 02/2020, fuel type: diesel, axle configuration: 4x2, fuel: diesel, wheelbase: 5,000 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 7,200 mm, loading space height: 2,500 mm, Year of construction: 2020, Equipment: tail-lift, Technical information Number of cylinders: 6 Engine displacement: 6,700 cc AdBlue system: Yes Fuel tank: 200 liters Maximum front axle load: 4480 kg Maximum rear axle load: 8480 kg Dimensions Dimensions (L x W): 910 x 255 cm Weights Empty weight: 5,880 kg Payload: 6,120 kg GVW: 12,000 kg Functional Tail lift: Dhollandia, tailgate, 1500 kg Loading area height: 100 cm Condition Technical condition: good Visual condition: good Further information Contact Martin Vos Vos, Martin Martin Vos or Martin Vos for more information. = Company information = Cgolitdxjwdaxzo Nst hello

Condition: new, Year of construction: 2023, operating hours: 26 h, power: 1 kW (1.36 HP), carrying capacity of cage: 363 kg, construction height: 2,200 mm, wheelbase: 1,800 mm, ground clearance: 130 mm, total length: 2,450 mm, front tire size: 15x5, rear tire size: 15x5, drive type: Elektro, construction width: 820 mm, net weight: 1,864 kg, working height: 8,130 mm, front tire type: Genie, rear tire type: Genie, - Geländerhöhe 1,10 m - Höhe der Fußleiste 15 cm - Max. Personen auf der Plattform (innen/außen) 2 / 1 1 - Verfahrbar bis max. Plattformhöhe 6,13 m 6,13 m - Fahrgeschwindigkeit – eingefahren 3,2 km/h - Fahrgeschwindigkeit – ausgefahren 0,8 km/h - Steigfähigkeit – eingefahren 25% - Wenderadius – innen/außen 0 / 2,29 m - Hub-/Senkzeit 32 / 26 sec - Neigungssensor-Aktivierung (Längsachse/Querachse) 3° / 1,5° - Nichtmarkierende Vollgummi-Reifen 38×13 cm Cslitdsvkh Tzsx Nsgt - Antriebsart 24 V DC (4×6 V 225 Ah) - Tankinhalt Hydrauliksystem (E-Drive) 15 L - Geräusch-/Schalldruckpegel (Boden) < 70 dBA - Geräusch-/Schalldruckpegel (Plattform) < 70 dBA - Vibration < 2,5 m/s - Hinten eingelassene Steckdose für Ladegerät - Stromkabel zur Plattform ohne Fehlerstromschutz - Stromkabel zur Plattform - Senk-, Neigungs- und Bewegungsalarm - Plattform mit Riffelblechboden - Doppel-LED-Blitzwarnleuchten - Elektronik Horn (Hupe) - Klappbares Geländer, Schwingtür in voller Geländerhöhe (GS-2046) - Klappbares Geländer, Schwingtür auf halber Geländerhöhe (GS-2032) - Befestigungspunkte für Auffanggurte - Schutzabdeckung für das Plattformbedienpult - Plattform-Lasterfassungssystem - Proportionale Fahr- und Hubsteuerung - Plattformausschub - SmartLink Zweizonen-Steuerung - Notablass zum Senken der Plattform - Mehrfachscheibenbremsen an zwei Rädern - Vorrichtung zum elektrischen Lösen der Bremsen - Staplertaschen - Vorrichtung zum manuellen Lösen der Bremsen - Vollintegriertes Diagnosesystem mit Batterieanzeige - Lochfahrschutz - Nichtmarkierende Vollgummi-Reifen - Tech Pro Link Anschluss - Verzurrpunkte und Kranösen

Condition: used, mileage: 428,976 km, power: 168 kW (228.42 HP), first registration: 01/2007, fuel type: diesel, color: other, axle configuration: 6x2, fuel: diesel, wheelbase: 4,700 mm, gearing type: automatic, emission class: euro4, Year of construction: 2007, Equipment: air conditioning, cruise control, = Additional options and accessories = - Blind spot camera is mirror support - Power side-view mirror = Remarks = Structure Construction year: 2006 = More information = Technical information Cslitdxewdin Ss Nogt Number of cylinders: 5 Engine capacity: 8.867 cc Drivetrain Make of engine: SCANIA Axle configuration Front axle: Max. axle load: 7500 kg; Steering Rear axle 1: Lift axle; Max. axle load: 7500 kg; Steering Rear axle 2: Double wheels; Max. axle load: 11500 kg Measures Dimensions (LxW): 890 x 252 cm Weights Empty weight: 14.354 kg Carrying capacity: 12.146 kg GVW: 26.500 kg Max. towing weight: 50.000 kg Functional Make of bodywork: GESINK GPM III 20H25 GCB 1000 SPLIT Tipper: Back Interior Number of seats: 2 Identification Registration number: BS-RR-63 Serial number: XLEP6X20005160476

Condition: used, mileage: 25,000 km, power: 217 kW (295.04 HP), first registration: 08/2021, fuel type: diesel, color: white, axle configuration: 4x2, tire size: 315/80 R22.5, fuel: diesel, wheelbase: 4,750 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, traction control, = Additional options and accessories = - Rear view camera - Additive cruise control - Aluminium fuel tank - Leaf spring suspension - Central lubrication system - Central door locking - EBS - Electric windows - Hydraulic grab arm - Air suspension - Parabolic spring suspension - PTO - Radio/CD/Audio system - Power steering = Special features = DAF LF 290 FA with Fassi F120 B.2.23 E-Dynamic crane and TAM T12 container hook system crane data: Lifting capacity: 10.50 Tm. Calculated according to the standard: DIN12999: 2009 HC1 HD5/S2. Maximum hydraulic reach: 9.85 m. Foldable behind the cabin Swivel range: 410° Swivel torque: 17.7 KNH Hydraulic pressure: 340 bar. Cgoliewc T S Sstdx Not Hook system data: hook height: 143 cm equipped for containers with dimensions between 310cm and 480cm = More information = Drive Tank capacity: 340 litres Transmission Transmission: AS-tronic, 12 gears, Automatic Axle configuration Tyre size: 315/80 R22.5 Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: parabolic suspension Rear axle: Double-tired; Max. axle load: 12000 kg; Tyre profile left inner: 70%; Tyre profile left outside: 70%; Tyre profile right inside: 70%; Tyre profile right outside: 70%; Suspension: air suspension Dimensions Dimensions (LxWxH): 751 x 255 x 346 cm Functional Brand of body: TAM T12 Pump: Yes Financial information Price: On request Identification License plate: cwkr12

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Cgelitdov Dvhysx Not Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: used, mileage: 1,000 km, power: 80 kW (108.77 HP), fuel type: electric, gearing type: automatic, overall weight: 2,250 kg, first registration: 02/2018, loading space length: 2,040 mm, loading space width: 1,500 mm, loading space height: 1,358 mm, emission class: euro6, color: white, number of seats: 2, Equipment: ABS, air conditioning, central locking, * Power steering * Partition wall * Central locking Air conditioning: Automatic Safety: ABS Vehicle is in good condition! 3 units in stock: 2 2018, 1 2019, price from €12,500 net Financing available Cslowdchlsitdx Negt

Condition: used, Year of construction: 2018, machine/vehicle number: D-00384, overall weight: 1 kg, load capacity: 5 kg, arm reach: 50 mm, Robotiq Hand-E Gripper – Used (2018) The Robotiq Hand-E is a versatile and compact industrial gripper, designed for precision work in collaborative robot applications. This 2018 model has been gently used and is in good condition – ready for a second life in your production environment. Features: Year of construction: 2018 Condition: Used, technically fully functional Stroke: Up to 50 mm Maximum gripping force: 130 N Load capacity: Up to 5 kg (depending on application) Compatible with: UR e-series, plug & play Applications: Assembly, pick & place, machine tending, quality control Why choose this Hand-E gripper? The Robotiq Hand-E is particularly suitable for applications where precision, flexibility and safety are key. Thanks to its easy integration and robust design, it is ideal for both R&D environments and industrial production. Cgsljwc R T Hsitdx Net Includes: Gripper with jaws Connection cable to the robot head plug. Manual (digital)

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, cart length 3200mm guidance of cart on steel rods electric adjustment of the disc angle electrical blade height adjustment Blade angle adjustment from the control panel blade height adjustment from desktop right fence adjustable to size from the control panel cutting width 1120 mm maximum blade diameter 400 mm minimum blade diameter 250mm undercutter diameter 125mm power of main engine 5,5 KW power of undercutting motor 1kW rotation speed of main saw 3200/4200/5000 Cgjlisvbb Iaetdx Net RPM of undercutter 9000 year of production 1996 weight 1100kg overall dimensions 330x350x170 cm 380V power supply

Condition: used, Year of construction: 1994, Functionality: fully functional, material width: 250 mm, working width: 240 mm, roll diameter: 600 mm, 1 Printing units 5 VS 5 (flexo – fully rotary) 2 Dryer UV 1 HL / IR 5 3 Laminating station 1 fixed after DW 5 4 Die cutter rotary 2 from top 2 from bottom 1 6 Corona station 1 13 Material width [mm] min 80 max 250 14 Printing width [mm] min 0 Celiewd Ridetdx Njgt max 240 15 Cutting width [mm] min 0 max 240 17 Cylinder circumference [“] min 8“ max 15“ 18 Unwinder Ø [mm] 600 19 Laminating unit unwinder Ø [mm] 400 20 Grid rewinder Ø [mm] 600 21 Rewinder Ø [mm] 700 22 Note: The machine can be expanded with the coating and cutting station

Condition: good (used), axle configuration: 3 axles, wheelbase: 8,910 mm, first registration: 03/2013, suspension: air, color: white, tire size: 385/65, Year of construction: 2013, Equipment: tail-lift, Refrigeration unit brand: Thermo King = Further information = Axle configuration Tire size: 385/65 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9000 kg; Left tire profile: 45%; Right tire profile: 45% Rear axle 2: Max. axle load: 9000 kg; Left tire profile: 45%; Right tire profile: 45% Cgolitdxewc I Sts Not Rear axle 3: Max. axle load: 9000 kg; Left tire profile: 45%; Tire profile right: 45% Dimensions Dimensions (L x W): 1400 x 260 cm Weight Unladen weight: 8,874 kg Payload: 33,126 kg GVW: 42,000 kg Functional Tail lift: Zepro, 2,000 kg Refrigerated engine: diesel and electric (10,511 operating hours diesel; 984 electric) Maintenance, history, and condition General technical inspection (AMO): inspected until November 2025 Technical condition: good Visual condition: good Further information Contact Maarten Busser or Niels Busser for further information.

Condition: new, Year of construction: 2024, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m Cgolisv Dvfrstdx Nst The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, High temperature resistant corrosion protection and temperature resistant special electrode Cgelitdjhhykijx Not Make Capilla Type 521 E HL diameter 2,5 mm length 350 mm Weight 5kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.10 E -Class: 8502 -Price: per piece -Number: 26 pieces -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece Colod Sp I Asitdx Nogt

Condition: used, Year of construction: 2010, operating hours: 32,374 h, Field of application: Forestry Power: 110 kW (150 HP) Empty weight: 16.900 kg Technical inspection expiration date: 2025 Auction item. Forwarder in working condition. Cslitdxewfpmqe Nsgt Sold as seen in the photos. Hydraulic pumps replaced 2 years ago.

Condition: ready for operation (used), Year of construction: 1995, BAD DUBEN Model PRX 32 E - CNC Used - in excellent condition Bad Duben: 2 The Cylindrical Thread Roller Brand: BAD DUBEN Model: PRX 32 E - CNC Type: Threading Machines, Thread Rollers, Cylindrical Die Condition: Used, good condition Serial no.: 17 Year: 1995 Max rolling pressure: 16 T Workpiece diameter: 6 - 24 mm. Thread Length: 200mm. Roller diameter: 195 mm. Max pitch: 3mm. Speed Range of roller splindles: 40-315 Diam: 210 mm. Weight: 4,500 kg. Cgjlitdov Imqyjx Net Visible c/o H.B.R. srl - Calolziocorte (LC) - Italy

Condition: used, mileage: 103,800 km, power: 220 kW (299.12 HP), fuel type: hybrid, gearing type: automatic, first registration: 10/2020, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, navigation system, second-hand vehicle warranty, soot filter, Optional extras: Acoustic glass front door windows, Tour assistance package, Audi connect (emergency call and assistance system), Audi smartphone interface, Electrically adjustable, heated and folding exterior mirrors, Bluetooth hands-free system with voice recognition (Audi Phone Box), Fabric headlining, black, Front and rear parking aid, optical (APS Plus), Driving assistance system: Occupant protection system (Audi pre sense basic), Front camera (windshield), Luggage compartment lid electr. (open + close), Interior mirror with automatic dimming, Digital instrument cluster (virtual cockpit), Front lumbar supports, electrically adjustable, Steering wheel (leather - 3-spoke) with multifunction plus, Multi-media interface MMI Navigation Plus with MMI Touch, Reversing camera, Seat cover/upholstery: Alcantara/leather, Heated front seats, Sound system DSP / Audi sound system, Front sports seats Further equipment:New price ¤ 54,546 BPM Rest Bpm Weight 2105 Displacement 1984 Power (299 hp / 220 kW) Vehicle tax ¤ 30 Airbag passenger side can be switched off, Airbag driver/passenger side, Audi Drive Select, AUX-IN connection, Exterior mirror convex, left, Exterior mirror convex, right, Exterior mirror body color, Indicator lights LED integrated in exterior mirror, Brake assist, Anodized roof rails, Dynamic chassis, Electric motor 35 kW (hybrid drive), Exterior package S line, Driving assistance system: Hill descent assist, Driving assistance system: City emergency braking function (Audi pre sense City), Front windscreen acoustic glass, Velour floor mats, Speed limiter system, LED rear lights, Hybrid, Hybrid 220 kW (engine 2.0 Ltr. - 185 kW TFSI), Interior: Micrometallic inlays silver, Isofix mounts for child seat, Body: 4-door, Child safety lock, manual, Comfort automatic air conditioning 3-zone, Head airbag system (Sideguard), Fuel tank: 54 ltr, Charging cable for public charging stations (e-tron), Charging cable with industrial plug (16 A / 400 V), Charging cable with Schuko plug, Automatic headlight range control, Light sensor (Coming Home, Leaving Home), LM rims, Rear center armrest with compartment, Model designation with new performance labeling, Multi-media interface MMI Basic Plus / MMI Radio Plus, Non-smoking package, Otto particulate filter (OPF), Electromechanical parking brake, Digital radio reception (DAB), Wheelbase 2819 mm, Tyre repair kit, Tyre monitoring display, Rear bench seat (plus) and/or backrest split, Low-emission in accordance with Euro 6d-TEMP emissions standard, Heatable windscreen washer nozzles, Front side airbag, Start/stop system, Uni paint finish, Green tinted heat-insulating glazing, Xenon headlights Plus (dipped and main beam), Keyless-Go central locking/start system Cgolieu Tamyotdx Njt

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cgelitdsv Dvkzjx Net Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), mileage: 531,287 km, power: 172 kW (233.85 HP), first registration: 02/2018, fuel type: diesel, color: white, axle configuration: 4x2, fuel: diesel, wheelbase: 3,900 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space width: 2,190 mm, loading space length: 5,440 mm, loading space height: 2,130 mm, Year of construction: 2018, Equipment: ABS, air conditioning, cruise control, onboard computer, spoiler, traction control, = Additional Options and Accessories = - Armrest - Steering Wheel Audio Controls - AUX Port - Outside Temperature Display - Cup Holder - Roof Spoiler - Tachometer - EBS - Electric Windows - Heated Electric Mirrors - ESP - Extra Lighting - Driver's Seat Height Adjustment - Remote Central Locking - Low Noise - Speed Limiter - Tinted Glass - Rear Doors - Height-Adjustable Steering Wheel - Folding Exterior Mirrors - Air Conditioning - Center Armrest - Multifunction Steering Wheel - Radio/CD Player - Reversing Camera - Full Service History - Side Door - Power Steering - Sunshade - Ignition Interrupter - Tachograph - USB Port = Remarks = Refrigerator Brand: Konvekta = Further Information = Technical Information Number of Cylinders: 6 Celitowc Dr Nsdx Nogt Engine Displacement: 6,700 cc AdBlue system: Yes Fuel tank: 500 liters Transmission: 6-speed, automatic Maximum front axle load: 4480 kg Maximum rear axle load: 8480 kg Dimensions Dimensions (L x W x H): 750 x 235 x 345 cm Weights Curb weight: 5,770 kg Payload: 6,220 kg GVW: 11,990 kg Functional Cooling: 5°C to -20°C Loading area height: 100 cm Cooling engine: Diesel and electric Wall thickness: 7 mm Maintenance General technical inspection (MOT): New MOT upon delivery History Booklets: Present Condition Technical condition: Good Visual condition: Good Damage: None = Company information = Nidro cars Holland is located in the center of the country and is the right address for the purchase of your car, van or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: LOOK FOR OUR ENTIRE STOCK AT All trade is possible with us! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, total height: 3,000 mm, back gauge travel distance R-axis: 150 mm, pressing force: 200 t, total width: 1,950 mm, total length: 5,300 mm, throat depth: 1,000 mm, overall weight: 17,000 kg, operating speed: 90 mm/s, distance between stands: 4,200 mm, table height: 1,000 mm, bending length: 4,060 mm, warranty duration: 6 months, Equipment: safety light barrier, SAFANDARLEY E-Brake press brakes have an electric drive. Lenze servomotors controlled by inverters from the same company allow for fast and reliable operation of the system. Additionally, the machine consumes electricity mainly when the slider goes down. Cjlovpqpisitdx Njgt The slider returns using the force resulting from the spring package on both sides of the machine. When the machine is not in use, it does not consume electricity because there is no pump in the system as in hydraulic presses. Electricity consumption is estimated at 70% lower than in conventional hydraulic presses. Servo-electric press brake SAFANDARLEY model E-Brake Pressure 3000 kN (300 tons) Slider stroke 300 mm Opening Q=690 mm Upper beam exit speed 90 mm/s Upper beam accuracy +/- 0.01 mm CNC controlled axes: Y1-Y2 - upper beam control with the possibility of using skews X - bumper beam exit (gives the dimension of the bent element). Very high positioning accuracy. delta X - independent bumper finger used for skewing R - bumper beam top/bottom, stroke 200mm Z1-Z2 - bumper fingers sliding along the bending line (speed 2000mm/s) Max bumper finger speed 350mm/s Max bumper finger range (third reference point range in X axis) 1000mm R axis bumper range 200mm Connected power 22kW (controlled by inverter) Weight 17,000kg Machine width 5,300 mm Machine depth 1,950 mm Machine height 2,810 mm Power supply 3/N/PE 50Hz – 400/230V Servo-electric drive (without hydraulic system) Drive transmission by means of belts

Condition: good (used), Year of construction: 1997, 1 used cycle lathe Brand Weiler Type E 35 Year of construction 1997 With 2-axis Siemens Sinumerik 805 Spindle bore: 54 mm Center distance: 950 mm Turn-over over bed: 410 mm Speed range: 4 – 3000 rpm With the following accessories: Multifix tool holder with various inserts Chuck guard 3-jaw chuck 250 mm Chip collection tray Chip protection wall with lighting Cgolitdsv T Rrlox Njt Coolant system

Condition: used, mileage: 230,000 km, power: 353 kW (479.95 HP), first registration: 03/2022, fuel type: diesel, axle configuration: 4x2, fuel: diesel, wheelbase: 4,000 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, differential lock, navigation system, parking heater, sleeping cabin, spoiler, = Additional Options and Accessories = - Aluminum Fuel Tank - Roof Spoiler - Dual Fuel Tank - Electric Windows - Remote Central Locking - Speed Limiter - Refrigerator - Fog Lights - Radio/CD Player - Sleeper Cabin - Side Skirts - Stability Control - Auxiliary Heating - Xenon Headlights - Central Locking = Additional Information = Technical Information Number of Cylinders: 6 Engine Capacity: 12,902 cc Maximum Front Axle Load: 8,000 kg Rear Axle: Differential Lock; Max. axle load: 11,500 kg Dimensions Dimensions (L x W): 652 x 254 cm Colitdxowcw Tmo Nsgt Weights Unladen weight: 8,136 kg Payload: 12,364 kg GVW: 20,500 kg Functional Cargo space capacity: 1,180 l Further information Contact Bastien Begemann or Corné Visser for further information.

Condition: excellent (used), lifting height: 16,000 mm, Year of construction: 2025, General information Field of application: Construction Weights Empty weight: 2.850 kg Functional Mast length: 1.600 cm Length of jib: 4,3 m Lifting capacity: 3.000 kg Colitdjwczbhex Nsgt Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 200 kg Hook height horizontal jib: 925 cm Delivery terms: EXW Transport dimensions (LxWxH): 2,98x0,77x1,88 Rental currency: EUR Production country: NL Min boom length: 200 cm Additional information Please contact Sales Department for more information

Condition: excellent (used), lifting height: 5,700 mm, Year of construction: 2025, operating hours: 22 h, General information Field of application: Construction Weights Empty weight: 800 kg Functional Mast length: 440 cm Length of jib: 1 m Lifting capacity: 800 kg Cgslitdxewczbbs Not Condition Technical condition: very good Visual appearance: very good Other information Tyre brand: Rupsen Maximum lifting capacity at end of jib: 130 kg Hook height horizontal jib: 460 cm Hook height luffed jib: 560 cm Delivery terms: EXW Transport dimensions (LxWxH): 0,0017x0,0007x0,00136 Rental currency: EUR Production country: NL Min boom length: 100 cm Additional information Please contact Sales Department for more information