Used Ciata 1500 for sale (7,325)

Condition: ready for operation (used), Year of construction: 2022, Professional version, laser power: 1500W, integrated pilot laser, wavelength (nm): 1075 ± 5, programmable slots: 9, W-LAN. The condition is as good as new. Crslqwfsrwzrue Tdeb

Condition: new, Year of construction: 2025, The device has 2 cooling systems: - Laser head cooling system Crolqwfsv Aipnj Tdob - Laser source cooling system Chiller designed for lasers up to 1500 W Designed for cooling tubes in laser plotters thanks to the use of a cooling unit. The chiller maintains the correct working temperature of the laser source, ensuring constant cutting or engraving quality throughout its use. Technical parameters Tank capacity 15L Max. water cycle 70L/min Water head lift 45m Cooling capacity 5.1kW Refrigerant R-410A Pin diameter 1/2" rp Power 220V (+-10%), 50Hz Weight 72kg Dimensions 700x470x890mm

Condition: used, Year of construction: 2020, Gear motor, electric motor, electric gear motor, stainless steel motor, stainless steel gear motor, stainless steel bevel gear motor, permanent magnet synchronous motor Crslqwf Tsrqinmedeb -Manufacturer: Bauer, adjustable stainless steel gear motor -Note: Frequency converter required -Type. SNFA5E09XA4-TF/VA-TM -Engine: speed 150-1500 rpm -Power: 1.1 kW -Hollow shaft: Ø 38 x 1750 mm -Protection class: IP65 -Dimensions: 645/200/H220 mm -Weight: 53 kg

Condition: used, Functionality: fully functional, “IFE SZ 1500 FS” for Sale Manufacturer: IFE Cslqwfsu Tktdj Tderb Type: SZ 1500 FS Mach. No.: 51 B084-10-1 Width: 1.500mm Year of Manufacture: 2005 Decks: 5 2 Pcs. Unbalance Motors and Springs included. Will be overhauled, sandblasted and painted.

Condition: not inspected (used), Year of construction: 2002, center height: 250 mm, turning length: 1,500 mm, Compass 250 x 1500 Year 2002 Celqsvt Nxkewf Tdsrb Not tested so I don't know the condition. Can be loaded onto a truck. Can be delivered at an additional cost.

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a Coljgvkdbsqwf Tdjrb diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Year of construction: 2007, Condition: ready for operation (used), Throughput: 300kg/m², max. working width: 1500mm, max. workpiece thickness: 20mm, min. workpiece dimensions X/Y: 50mm/50mm, number of brushes: 4, brush heads: 2, machine dimensions X/Y/Z: approx. 2800mm/1500mm/1500mm, weight: approx. 1800kg, operating hours: 51h. Documentation available. On-site inspection is possible. Celqwjudy S Dof Tdorb

Condition: excellent (used), Year of construction: 2015, operating hours: 4,830 h, Functionality: fully functional, machine/vehicle number: Dynamic 1500, type of input current: AC, working range: 3,000 mm, input voltage: 400 V, sheet thickness steel (max.): 10 mm, cutting current: 40 A, Stigal DYNAMIC 1500 plasma cutter, year of manufacture 2015, work table for cutting sheets up to 1500x3000mm. The set includes the Cutmaster A80 plasma unit designed for cutting black and galvanized steel sheets up to 10mm thick. Very good condition. The machine is used in continuous use to cut only thin galvanized steel sheets with thicknesses from 0.5mm to 1.0mm used in the production of prefabricated ventilation elements. Serviced by the STIGAL factory service on an ongoing basis every year, all necessary parts replaced according to the needs and recommendations of the manufacturer. All consumables came from the original distribution of the STIGAL manufacturer. The machine has been working in our company since new. The machine is in order and connected to all media. Interested parties are welcome to view and check it on site during operation. Crolqwovzlpnef Tdob The machine works on codes generated by CAM software, i.e. Lantek or Wrykrys. Additional photos and a video of the machine working are available for those interested after prior contact. Possibility to buy the cutter together with the dust collector visible in the photo. The given net price (the offer price applies only to the plasma cutter with the unit). The machine is available immediately.

Condition: used, Scissor lift table, scissor lift table, scissor lift platform, scissor lifting platform, single scissor lift table -Scissor lift table: with roller conveyor -Load capacity: 1500 kg -Platform: 3000 x 810 mm -Dimensions retracted: height 255 mm -Extended dimensions: height 955 mm -Roller conveyor: double, with belt brake, pneumatic -Rolls: diameter 40 x 335 mm -Drive: 2.3 kW Celqwfoupbdms Tdorb -Weight: 715 kg

Condition: good (used), Manufacturer: Stuckstette Size: 1.500 x 4.500mm Decks: 4 Frame: Not included Cjlqwf Tjg Snudjderb Included: – Electrical Motor – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,55 t The Professional 750 table article no. 4-280040.P 3000x1500x200 mm has a Cslqwfegvkc Es Tdjrb Hole arrangement in a 100 mm grid on the table top and a parallel one Hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has one Material thickness of approx. 24.5-27 mm and is made from high quality steelS355J2 + N manufactured. Grid lines at a distance of 100 mm make it easier for you to set up your Contraption. The welding tables are provided with a scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: ready for operation (used), Year of construction: 2002, Operating pressure double jacket/tubes: 10bar/6bar, material: stainless steel, operating temperature: 180°C, output: approx. 350kg/h, machine dimensions X/Y/Z: approx. 2100mm/1000mm/3700mm, weight: approx.1500kg. Documentation available. On-site inspection is possible. Crelqwouh Azvsf Tdjb

Condition: used, Year of construction: 2011, conveyor belt, belt conveyor, transport belt, belt conveyor -Manufacturer: Grenzebach, conveyor belt type ZFTSP -Speed: m/min -Conveyor belt length: 830 mm -Belt spacing: 3x 500 mm -Conveyor width: 1500 mm -Drive: SEW-Eurodrive 0.18 kW 1380/71 rpm -Dimensions: 1900/900/H2150 mm Crelqstrhmmewf Tdob -Weight: 219 kg

Condition: as good as new (ex-display), Manufacturer: Cyrus Size: 1500 x 1150 (1050)mm Unbalance Motor: 2 Pcs. Friedrich F 285-4-3.4 (1,4 kW / 1.460 RPM) With Stainless steel wear plate. Celqwfeiv Hyqo Tdorb

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Cjlqjgvkc Tjwf Tdsrb The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Year of construction: 1999, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Crjlqet E Trhewf Tdob

Year of construction: 1999, Condition: used, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric cable hoist -Cable pull: Type AS 2008-16 2/1 Celjtnlz Uoqwf Tdsrb -Load capacity: 1500 kg -Roll spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Main stroke/fine stroke: 8.0/2.0 m/min -Lifting height: approx. 9.0 m -Travel drive: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm -Weight: 226 kg

Year of construction: 2013, Condition: ready for operation (used), Film carriage: 2x manual via belt, column height: 2260mm, max. loading height including pallet: 2300mm, turntable diameter: 1500mm, turntable load capacity: 1500kg, turntable speed: 13.5rpm, turntable height: 76mm. Machine dimensions X/Y: 2600mm/1500mm, weight: approx. 330kg. Documentation available. On-site inspection is possible. Celqwf Tjuzlhboderb

Year of construction: 1999, Condition: used, Indoor crane, crane, electric rope hoist, hand trolley, roller trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Manufacturer: steel, crane chassis with electric cable pull -Cable: Type AS 2008-16 2/1 Celqwsq Tvpxsf Tdorb -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm -Weight: 251 kg

Year of construction: 2006, Condition: ready for operation (used), Output: 1.5t steam/h, max. nominal power: 1093kW/h, gas pressure: 50mbar, fuel: natural gas, including water container, two pumps, safety devices and steam dryer. Cslqwsf Tdcusf Tdorb

Year of construction: 2009, Condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor Crelqotlzgaewf Tdjb -Manufacturer: Grenzebach, roller conveyor type RFS stable design -Drive motor: 0.18 kW 76 rpm -Intermediate dimension: 1500 mm -Conveyor length: 1250 mm -Axle distance: 250 mm -Roll spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Number: 1x roller conveyor available -Dimensions: 1440/1700/H960 mm -Weight: 265 kg

Year of construction: 2015, Condition: ready for operation (used), Connected load: 300VA, weight: 170kg. Cjlqwsg Nt Ibof Tdorb

Year of construction: 2015, Condition: ready for operation (used), Connected load: 300VA, width: 1110mm, height: 2190mm. Croljg Nt Iisqwf Tdsb

Year of construction: 1996, Condition: ready for operation (used), Center distance: 1500mm, rotational speed: 3-2800/min, max. swing over bed/ slide: 500/ 290mm, controls: Monforts Control-System K, weight: 3.3t, with accessories, without tools. Crelqwf Tjip D Rhjdjb

Year of construction: 2015, Condition: ready for operation (used), Was used for the production and cooling of spreadable grease, with documentation, without accessories or spare parts, was maintained regularly, on-site inspection is possible. Celoq Rflzeqwf Tdsrb