Used Ciata P-100 Hem for sale (44,508)

Condition: excellent (used), Year of construction: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 injection unit: Screw diameter: 40 mm Injection weight: 228.4 g Injection pressure: 2100 bar Metering volume: 251 ccm Clamping unit: clamping force: 100 t tie bar distance: 420x420 mm size of clamping platens: 640x640 mm ejector: hydraulic clamping unit: toggle lever Delqyewcm I Tshiyscg Control system: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Control with hot runners x 12 Injection unit is wear resistant and resistant to corrosion Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pumps/motor: 18.5 kW Heating power: 12,1 kW Total power: 30.6 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 / Dcjlqyhjwhpcqjiyog

Year of construction: 1992, Condition: excellent (used), CNC drilling - milling machine Fehlmann Picomax 100 CNC Used machine (good) Control type NC Year of manufacture 1992 Operating hours n.a. Price 24.950 € net plus VAT Dimensions 3100x2200x2500 Weight 3000 kg Location Haiger Description Djlqyhiefk Tqpoyocg CNC tool milling machine of the brand Fehlmann suitable for prototype construction, single part production and subcontracting Travel : 850x435x590mm Control : Heidenhain TNC 360 Technical data Control NC Heidenhain TNC 360 table 1570x500mm Longitudinal travel (X,Y,Z axis) 850x435x590mm Tool changer no tool holder: SF 32 (Fehlmann) vertical spindle speeds: 50-7150 rpm Feed rates 2-8000mm/min Connection 50 Hz 3x 380V spindle motor 10,5KW Accessories : operating instructions, coolant system, etc.

Condition: new, Year of construction: 2025, Omach / Karbend benders Bp10 Bp20 Bp30 Bp40 Bp 100 Dcjlqefd Ib Deyhiyjg Available from stock

Condition: repair required (used), Year of construction: 2007, Functionality: unexamined, travel distance X-axis: 6,100 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 170 mm, controller model: Kvara, number of slots in tool magazine: 12, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine is currently partially operational. A number of parts need to be replaced/checked, such as the air lines. PLC is operational, possibly software reset required. 3-axis machine. All parts, mats, bulkheads and protective covers are present. Can be picked up immediately. Dcelqyhiewg Hw Nsysg Possibly also a similar 4-axis machine for sale. This is fully operational and can be picked up mid-October.

Condition: good (used), Crossbars: 1250*40*40 mm If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grating, rear wall grating, depth bars available. Delsh Izuhjqyhiyscg Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: excellent (used), Year of construction: 2005, Arburg 270C 300-100 with the Wittmann W621 robot Year of construction: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 41 g Injection pressure: 2240 bar Metering volume: 49 ccm Clamping unit: Clamping force: 30 t Distance between tie bars: 270x270 mm Size of the clamping platens: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control unit with hot runners Hardened injection unit - bimetal Robot Wittmann W621 Year of construction: 2004 5-axis robot: 3 axes are driven by servomotors (electric); axis B (rotation) and C Travel in axes: X-550, Y-1000, Z-1500 Touch control panel Robot with adapter Purchase of the robot for an additional charge Dimensions Weight: 2250 kg Dcolqyhjwcmg Njiyeg Length/width/height: 3.42x1.48x1.99 m Drive: Pump/motor: 7.5 kW Heating output: 6.3 kW Total output: 13.8 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Cheese vat / Pasteurizer / Process tank 100 liters. Used - 3.5 years old The Vat: Dslqyjwg Ellshiyscg - Completely stainless steel - Double jacket (bain-marie) + insulation - Must be operated without pressure - 100 liters - Butterfly valve, NW 50 - Agitator mounted on the lid and easily removed using a quick-change adapter. - Agitator rotates slowly; approximately 24 RPM - 400 volt / 8.4 kW heating (16 amp plug). Heating power can be halved with a switch (8.4 - 4.2 kW). Control: - Digital milk temperature display - PID controller / thermostat - Control system with one automatic program (heating - holding - cooling) and manual operation (manual heating and manual cooling with cold water) - Heats up to 90°C - Cooling with cold water. Water inlet with motor-controlled ball valve.

Condition: like new (used), Year of construction: 2013, operating hours: 400 h, Functionality: fully functional, machine/vehicle number: 01000643, total height: 2,680 mm, pressing force: 100 t, total width: 2,580 mm, total length: 4,535 mm, overall weight: 6,600 kg, bending length: 3,000 mm, working length: 3,000 mm, Equipment: safety light barrier, Exceptional machine with 400 hours of use Dcslowg Ammjqyhiyog barely used, like new condition, folding accessories worth 8,000 euros, + Digipro touchscreen for drawing parts.

Condition: new, Year of construction: 2025, Functionality: fully functional, load capacity: 100 kg, total height: 3,150 mm, total length: 3,000 mm, stroke distance: 1,800 mm, Magnetful Pneumatic Manipulator Dolqewhklmsyhiyscg Powerful, safe, and ergonomic handling solution for metal parts with magnetic surfaces Magnetful is a pneumatic manipulator designed for the safe, fast, and ergonomic handling of metal parts with magnetic surfaces, such as sheets, plates, pipes, and profiles. Combining pneumatic and magnetic gripping technology, it safely lifts, transports, and positions metal loads. Thanks to its modular design, which can be mounted on ceilings, columns, or rail systems, Magnetful can be easily integrated into various production areas. Magnetful is widely used in the metalworking, automotive, heavy industry, shipbuilding, foundries, mechanical engineering, and logistics sectors. It eliminates the need for manual lifting of metal loads, reduces work-related accidents, minimizes operator fatigue, and accelerates production processes. General Technical Specifications: Load capacity: Up to 100 kg (maximum) Operating air: Dry, filtered (40 µm), and oil-free air at a minimum pressure of 0.7/0.8 MPa Magnetic gripping system: Pneumatic magnetic gripping technology for the safe lifting of metal parts Maximum reach: 3000 mm Vertical movement: 1800 mm Air consumption: 50 nl/min Mounting options: Ceiling, column, or rail system Energy efficiency: High performance with low energy consumption Control type: Ergonomic control handle for precise operation Safety: CE-certified, durable design optimized for heavy loads Benefits Strong grip with magnetic gripping: Safely lifts and transports parts with magnetic surfaces such as metal sheets, pipes, plates, and sheets. Safe and ergonomic operation: Reduces operator fatigue, eliminates the need to manually lift heavy metal parts, and improves worker safety. Speed and precision: Lift metal loads quickly and with control, accelerating the transport process. Flexible mounting options: Can be integrated into ceiling, column, or rail systems. Low operating costs: Ensures long-term, safe use with low energy consumption and minimal maintenance requirements. Magnetful is a pneumatic manipulator that makes handling metal parts with magnetic surfaces safe and efficient in metalworking and heavy industry. Choose our Magnetful model to accelerate your production processes and increase worker safety! For more information, contact us!

Condition: used, axle configuration: 2 axles, first registration: 04/2019, color: other, Year of construction: 2019, Empty weight: 4.240 kg Dcjlqjwgwwteyhiyjg Axle 1: left 8 mm right 8 mm Axle 2: left 8 mm right 8 mm Axle 3: left mm right mm We have the possibility to stack trailers!

Condition: used, mileage: 642,000 km, power: 338 kW (459.55 HP), first registration: 10/2019, overall weight: 18,000 kg, fuel type: gas, color: red, axle configuration: 2 axles, next inspection (TÜV): 09/2023, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, soot filter, IVECO AS440 LNG TOLL-FREE Dcjlqyhjwhcrreiyjg 2x IMMEDIATELY AVAILABLE DOUBLE FUEL TANK AIR CONDITIONING SYSTEM COOLING BOX ENGINE BRAKE MULTI STEERING WHEEL MULTIMEDIA DISPLAY ADR CERTIFICATE FROM TUV NEW TUV CAN BE MADE IF REQUIRED WE ARRANGE CUSTOMS EXPORT AND CUSTOMS LICENSE PLATES FOR YOU TEST DRIVE POSSIBLE

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Metering volume: 54 ccm Clamping unit: Clamping force: 100 t tie bar distance: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Dslqyhswcm Sloiyscg Tie-bar-less machine with two vertical injection units, with turntable. Air valve x 6 Hydraulic core puller x 2 Control system with hot runners x 12 Infrared protection curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized service Engel in Germany Dimensions: Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Propulsion: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, mileage: 403,430 km, power: 110 kW (149.56 HP), first registration: 06/2002, color: other, axle configuration: 4x2, tire size: 215/75R17.5, wheelbase: 3,100 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, Year of construction: 2002, Equipment: ABS, = Other options and accessories = - Electric windows - Spare wheel - Headlights - Toolbox = More information = Tire size: 215/75R17.5 Brakes: Disc brakes Dslqyhijwgrnyeyscg Front axle: Steered; Tire profile left: 5%; Tire profile right: 5%; Suspension: Leaf spring Rear axle: Dual tires; Tire profile left inside: 15%; Tire profile left outside: 15%; Tire profile right inside: 15%; Tire profile right outside: 15%; Suspension: Air suspension Curb weight: 4,360 kg Payload: 4,140 kg GVW: 8,500 kg Dimensions (L x W x H): 620 x 230 x 300 cm Damage: none

Condition: new, Universal bending machine UB-100 Eccentric quick clamping Readable bending angle up to 120 degrees Weight 35 kg Standard accessories: Infinitely adjustable bending stop Eccentric quick release Angle stop Deljga T Hvsqyhiyscg Lever and bending jig Material stop Cold bending: - Flat steel 100 x 5 mm - Square steel 16 x 16 mm - Round steel 18 mm - Angle steel 60 x 8 mm Hot bending: - Flat steel 100 x 15 mm - Square steel 30 x 30 mm - Circular steel 30 mm - Angle steel 100 x 12 mm

Year of construction: 2002, Condition: excellent (used), JEWA Flexo Rotonir SM52: M.No.: 02010-0017 Dcjlqyed Nd T Ujhiyeg BALDWIN: Typ: FK-1-500 // Serien No.: 151166 // Art.- No: 150.01.0001

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 400 Rotor width (mm) 1000 Drive capacity (hp) 40 Rotor blades (pieces) 3(5) x 1 Stator knives (rows) 2 Hopper opening (mm) 490 x 990 Total length (mm) 1348 Length machine (mm) 1120 Width total (mm) 1577 Djlep N Dv Hoqyhiyjcg Width machine (mm) 1216 Height (mm) 1914

Year of construction: 2006, Condition: used, Functionality: fully functional, Dimensions approx. 18 x 20 x 28 cm Dolqjwhxncoyhiyjcg

Condition: excellent (used), Year of construction: 2012, Arburg 375V 500-100 / Vertical injection molding machine with rotary table Year of construction: 2012 Injection unit: Screw diameter: 20 mm Injection weight: 29 g Injection pressure: 2500 bar Metering volume: 31 ccm Dcelqyjwcmlfshiysg Clamping unit: Clamping force: 50 t Distance between tie bars: 0x0 mm Size of the clamping platens: 504x424 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: Very good technical condition Tie-bar-less machine Operating hours: 30,000 h in automatic mode Hydraulic core pull x 1 Control unit with hot runners x 6 Hardened injection unit - bimetal Turntable diameter: 900 mm Very precise turntable, driven by a servo motor, controlled by an inverter Self-closing nozzle Built-in quality control system Infrared safety curtains Dimensions: Weight: 3380 kg Length/width/height: 2.52x1.47x3.25 m Drive: Pump/motor: 18 kW Heating output: 4.9 kW Total output: 22.9 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: used, mileage: 1,162,477 km, first registration: 10/2010, color: other, axle configuration: 6x2, tire size: 315/70 R22.5, wheelbase: 5,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: other, Year of construction: 2010, Equipment: ABS, cruise control, spoiler, tail-lift, = Additional Options and Accessories = - CD Player - Roof Spoiler - Electric Door Mirrors - Electric Windows - Spare Key - Speed Limiter - Aluminum Fuel Tank - Power Take-Off - Headlights - Stability Control - Standard Air Conditioning Dcjlswgrf Eoqyhiyeg - Visor - AC Power - Toolbox - Xenon Headlights - Central Locking = Additional Information = Axle Configuration Tire Size: 315/70 R22.5 Axle Brand: Other Brakes: Disc Brakes Front Axle: Steered; Left Tire Profile: 11 mm; Right Tire Profile: 13 mm; Suspension: Leaf Spring Rear Axle 1: Twin Tires; Left Tire Profile: 9 mm; Left Tire Profile: 8 mm; Right Tire Profile: 10 mm; Right Tire Profile: 7 mm; Suspension: Leaf Spring Rear Axle 2: Left Tire Profile: 5 mm; Tire tread (right): 6 mm; Suspension: Air suspension Dimensions Dimensions (L x W x H): 1060 x 255 x 400 cm Weight Curb weight: 11,090 kg Payload: 14,910 kg GVW: 26,000 kg Condition Damage: None

Condition: excellent (used), Format (cm): 32x52 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures) Dcolqyhieh Eik Heyeg

Year of construction: 2025, Condition: new, APPLICATIONS The S-Series granulators are mainly used as large central granulators for In-house recycling applications for processing large thick-walled parts in one stage or as a second-stage granulator after a shredder to achieve higher results or throughput rates GENERAL DESCRIPTION The high-performance S-Series granulators offer widths from 600 to 1000 mm with diameters of 400 and 560 mm. The all-welded heavy steel construction is designed to withstand the most demanding and universal applications. Rotor bearings, blades brackets and rotor shaft are oversized. The standard V-cut ensures a high quality grind with a very low percentage of fines in the starting material. The removable third stator blade (optional) acts as a deflection wedge and allows the machine to be quickly adapted to different application scenarios. Other standard equipment also includes easily adjustable blades from the outside, reducing the risk of contamination. S-SERIES - HIGH PERFORMANCE GRANULATORS ADVANTAGES: "The easily removable deflector wedge acts as a third stator blade and can be used to adjust the aggressiveness of the rotor at the first cut point. The V-Cut technology produces a high quality regrind, with simultaneous reducing energy consumption and noise. The high performance bearings are separated from the cutting chamber to prevent lubricant ingress and bearing failure to prevent material contamination. "Both rotor and stator knives are externally adjusted. Rotor diameter (mm) 560 Rotor width (mm) 1000 Drive capacity (HP) 100 Dcelqyhep N D Tyeiyog Rotor knives (pieces) 5 x 2 stator knives (rows) 2 + 1 Hopper opening (mm) 1000 x 650 Total length (mm) 2310 Length machine (mm) 2200 Width total (mm) 1800 Width machine (mm) 1330 Height (mm) 3770

Condition: excellent (used), Year of construction: 1998, Arburg 270C 500-100 Year of manufacture: 1998 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2500 bar Metering volume: 31 ccm Clamping unit : clamping force: 50 t tie bar distance: 270x270 mm size of clamping platens: 446x446 mm Ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Operating hours: approx. 50,000 h Euromap 12 Robot interface Hydraulic core pull x 1 Delqyhiowcmkboyjcg Control system with hot runners Injection unit hardened - bimetal The machine has an additional control panel - control by remote control The machine has been regularly serviced by the authorized service Arburg Dimensions: Weight: 2200 kg Length/width/height: 3.42x1.48x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,3 kW Total power: 21,3 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Format (cm): 32x46 All existing tools will be included with the device Dolqyhioh Eikmoyecg for punching and perforating as well as holders of these tools (see pictures)

Year of construction: 1982, Condition: excellent (used), machine/vehicle number: 676411N, WITH N&P UNIT (numbering & perforating) Counter (m): 45 Dcoleivz E Toqyhiysg Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000