Used Ciata 55 R for sale (26,546)

Year of construction: 2008, operating hours: 45,000 h, Condition: good (used), Used, oil-free, variable 55 kW screw compressor ALMIG LENTO 55 WK (water-cooled) The compressor is in good, neat condition. Year of construction: 2008 Operating hours: 45,000 operating hours Technical specifications Type: LENTO 55 WK Possible operating pressures of the system (continuously adjustable): 5 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C: at 5 bar min / max: 2.20 / 8.27 m³ / min at 6 bar min / max: 2.12 / 8.23 ​​m³ / min at 7 bar min / max: 2.04 / 8.19 m³ / min at 8 bar min / max: 1.97 / 8.15 m³ / min at 9 bar min / max: 1.89 / 7.70 m³ / min at 10 bar min / max: 1.81 / 7.35 m³ / min Rated power drive motor: 55 kW Degree of protection / insulation class of drive motor: IE 3 Protection / insulation class fan motor: IP 54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Cooling water requirement at 100% load Dob Elegkbfhez Rwjut (with inlet + 15 ° / delta t = 15 K): 55 l / min Cooling water supply (min / max): 5/35 ° C Cooling water outlet (max): 45 ° C Cooling water pressure (min / max): 4/10 bar Cooling water volume (min / max): 140 l / min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point refrigeration dryer 50% load: 3 ° C 100% load: 3 ° C Sound pressure level (DIN 45635 part 13) soundproofed, at 50% load: 64 dB (A) 100% load: 73 dB (A) Length: 2,300 mm Width: 1,400 mm Height: 1,560 mm Weight: 1,590 kg Compressed air connection: G 1 1/2 inches Visit our shop, we always have a large number of new and used compressors in stock.

Condition: good (used), Year of construction: 1998, power: 37 kW (50.31 HP), 2 pcs. chip fan from extraction system for wood chips Dujb Elzouvdpxs Rwet Details see picture are dismantled and immediately available

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, TECHNICAL DETAILS Sheet thickness: 8 mm Punching force: 220 kN Working area: 3,000 x 1,500 mm Control system: Siemens MACHINE DETAILS Machine weight: approx. 17,500 kg Dsb Elz Rsvi Iw Rjweut EQUIPMENT - Scraper alternating position control - Thread forming - Marking - fast beading - Slotting - Multishear - Multibend - Offset resetting - Roller tools - Set-up cassettes - Ball transfer table

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), Dob Elzenygvro Rwout 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: as good as new (ex-display), Year of construction: 2021, UZMA MG-R 2504 cutting length: 2560 mm cutting capacity steel: 4 mm Backgauge via control Return to center function Dusb Elz Rjignz Aswst Sheet upright Cutting line illumination CE

Condition: like new (used), Year of construction: 2023, operating hours: 5 h, Functionality: fully functional, machine/vehicle number: R23720DB6, overall weight: 1,090 kg, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB Plus A-Size, Fanuc Robot R-2000iC/210F - R-30iB Plus A Cabinet Robot Model A05B-1333-B205 Controller Model A05B-2610-B002 Year of manufacture robot: 07.2023 Input power voltage 380-415V Servo hand cable 4.5m (For 1 ax) Transport equipment R-2000iC/210F Mechanical unit Dummy connector for over travel No stopper for J1 axis Wrist flange (ISO) Scribe mark No bracket No dessout Djbot S Ipnj Elz Rwjut Mechanical unit cable with EE iPendant / English / Spot welding FROM64MB/SRAM3MB Backplane 2 slots Power supply unit Basic Dictionary (English) Option Dictionary (Chinese) Spot Tool+ Robot Software R-2000iC/210F Servo Gun Axis Digital Servo Function DeviceNet DAUGHTER board DN4 2 Servo Gun Option High Sensitive Collision Detec DeviceNet Interface Master & S Operators Panel (English/3 mod) 6 axes control C(H002) Discharge resistor A(1 element) Breaker 7.5KVA / Type E Trans/3 E-STOP unit (Standard, 7.5kVA) Teach pendant cable for iPendant Power transformer Type E 7.5KV Resistor Discharge Servo AMP c Operators Panel connection ca TP HOOK OPTION USB blind plate Fan unit A Aux. axis control with resisto Servo AMP (Alpha iSV 80) Brake Cable Tag (CRR65AB) CABLE TAG (AMP2L) ARP / ARM CABLE / STD / non-Flex / 7m Adapter Plate (60mm(AMP2)) R-2000iC / iD basic unit / stand Name plate R-2000iC Robot connection cable Non-flex Main board D(No vision, I/O Li) CPU card Standard (DRAM 1GB, I) Axes control card 12 axes Name plate R-30iB Plus Basic Software (Series 7DF3/V9.) Spare fuse Alfa iS 8 / 4000-B Taper/with D Servo AMP (Alpha isV 80) mount

Year of construction: 2022, Condition: new, New speedcontroled screwcompressor ALMIG Variable XP 55 Year 2022 Hours: 0 h Technical specifications: type: Variable 55 Possible operating pressures of the system: 5 to 13 bar Quantity delivered at 5 bar : 3,20 to 10,52 m³/min at 6 bar : 3,19 to 10,40 m³/min at 7 bar : 3,18 to 10,30 m³/min at 8 bar : 3,16 to 9,60 m³/min at 9 bar : 3,15 to 8,41 m³/min at 10 bar : 3,13 to 8,40 m³/min at 11 bar : 3,07 to 7,62 m³/min at 12 bar : 3,03 to 7,60 m³/min at 13 bar : 2,99 to 7,19 m³/min Installed power: 55 kW Protection class / Insulation class Drive motor: IP55 / ISO F Operating voltage / frequency: 400 V / 50 Hz Sound pressure level (DIN 45635 T13) : 74 dB (A) Dsb Elzed Ncthe Rwsut Compressed air connection: G 2" Dimensions and weight Length : 2000 mm Width : 1250 mm Height : 1750 mm Weight : 1640 kg

Condition: good (used), Barberan for joining plywood with lamella, year of manufacture: 2000, additionally applied with glue feeder, the machine works in automatic, maximum width of gluing board 160 mm, any length Dueb Eovgg Suolz Rwjt

Condition: excellent (used), Year of construction: 2019, operating hours: 1,627 h, Functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 730 kg, warranty duration: 12 months, water tank capacity: 120 l, HAKO SCRUBMASTER B120 R TB750 SCRUBBERS NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A CHARGER 2019 year of production Machine mileage is 1627 hours 750mm cleaning head (TB750) equipped with two new medium-hardness disc brushes, enabling work on any surface. New polyurethane astringent rubbers, resistant to contact with oil liquids, greases and petroleum derivatives. New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 750 Suction width (mm): 950 Theoretical capacity (m²/h): 4800 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready for work (kg): 730 Dusb Elz Rst R Skyewet Climbing ability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW NEOS 24V 30A BALANCER NEW 380mm PPL 0.5 disc brushes Suction bar with new oil-resistant rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (750 mm) ensures high surface efficiency A very legible and intuitive control panel.

Condition: used, Automatic double cell loader without pit for use in a squaring-edging line Motorized panel introduction transfer Double automatic panel loading station Suction cup system for moving the panels Panel detacher Panels can also be worked in double rows Useful width of the panel 1300 mm Useful length of the panel 3200 mm Vacuum pump Motorized transfers for the introduction of panel stacks Dob Elzorzhfhj Rwjut Motorized adjustment by automatic numerical control of the horizontal suction cup support bars Programming and control system

Year of construction: 2017, Condition: as good as new (ex-display), Punch Durma P 55 Dusb Eem Ak R Aslz Rwjt Exhibition machine Type: Durma P55 Year of manufacture: 2017 Demonstration machine Strokes per min.: 37 Punching diameter max: Ø 40x10mm Ø 20x20mm stroke: 60mm strokes per min. at 20mm stroke: 37/min

Year of construction: 2023, Condition: new, SPANEX SHB RS 55-70 Briquetting press for sale briquette form-cylinder,70mm motor capacity-5,5kW Djb Espbbdvelz Rweut Production volume-90kg/1 hauer

Year of construction: 2022, operating hours: 2 h, Condition: new, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2022 technical spezifications: type: LENTO 55 WK Possible operating pressures of the system: Delivery quantity at minimum / maximum speed at 5 bar (ue) : 2,10 / 8,17 m³/min at 6 bar (ue) : 2,04 / 8,02 m³/min at 7 bar (ue) : 1,98 / 7,88 m³/min at 8 bar (ue) : 1,91 / 7,73 m³/min at 9 bar (ue) : 1,85 / 7,21 m³/min at 10 bar (ue) : 1,79 / 6,77 m³/min Installed power: 55 kW Protection class / Insulation class Drive motor: IP54 / H Operating voltage / frequency: 400/50 V / Hz Residual oil content: 0 mg / m³ Duob Elz Rjc Rt D Njwjt Sound pressure level (DIN 45635 T13) At 50% load: 69 dB (A) At 100% load: 75 dB (A) Compressed air connection: 1 1/2" Dimensions and weight Length : 2300 mm Width : 1400 mm Height : 2265 mm Weight : 1720 kg

Condition: used, Brand: FANUC Model: R-J2 FOR ARC MATE 120 i Condition: USED The panel is without cable and teach pendant. Shipping: NOT included to price Payment: 100% payment prior to collection / VAT is not included to price Dsb Ejmrqwgslz Rweut If you need other models and more robots, please contact us.

Condition: excellent (used), Year of construction: 2019, operating hours: 1,061 h, Functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 730 kg, warranty duration: 12 months, water tank capacity: 120 l, HAKO SCRUBMASTER B120 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) 2019 year of production Machine mileage is 1061 hours 750mm cleaning head (TB750) equipped with two new medium-hardness disc brushes, enabling work on any surface. New polyurethane astringent rubbers, resistant to contact with oil liquids, greases and petroleum derivatives. New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see Dujbjt Sd S Es Elz Rwjt TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 750 Suction width (mm): 950 Theoretical capacity (m²/h): 4800 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready for work (kg): 730 Climbing ability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 380mm PPL 0.5 disc brushes Suction bar with new oil-resistant rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very agile. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (750mm) ensures high surface efficiency A very legible and intuitive control panel

Condition: ready for operation (used), Functionality: fully functional, total width: 1,670 mm, total height: 2,050 mm, total length: 1,200 mm, working width: 900 mm, grinding width: 900 mm, overall weight: 1,300 kg, grinding height: 100 mm, type of input current: three-phase, GHERMANDI 950 R wide belt sander Specifications: - manufacturer- GHERMANDI - model- CLG1NT 950 - working width 900 mm - max working height 100 mm - 1 working unit - hard rubber calibrating roller with a diameter of 280 mm - main motor with power 9,0 kW - working speed of conveyor regulated by variator in the range ~ 4-20 m/min - electronic indicator of the thickness of the ground piece - electrical up/down adjustment - oscillation of the belt on the optics - conveyor in very good condition - original painting - extraction ports 150 and 120 mm - grinding belt size - 950 x 2000 mm - weight - approx. 1300 kg - overall dimensions 120 x 167 x 205 cm (L x W x H) Additional information: - good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale Deb Eou Av Ibjlz Rweut - possibility to turn on and check the device on site - the price given in the auction does not include VAT and transportation costs

Condition: used, load capacity: 1,600 kg, Cardboard clamp ISO class: ISO class 3 = 2.500 - 4.999 kg Technical condition: good Dueb Elz Ret S Nwaswst Description: ISO 3A (51 cm) Capacity 1600 kg Opening range 550-1960 mm Clamp length 950 mm Clamp height 1200 mm Width 950 mm ID OS918

Condition: excellent (used), Year of construction: 2016, ECOTROC ATK 55 adsorption dehumidifier Efficiency 10 m3/min Year of manufacture 2016 FULLY OPERATIONAL DEHUMIDIFIER. Dsbovfdn Rj Elz Rweut

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, outer diameter: 3,200 mm, rotational speed (max.): 172 rpm, The Rösler Long Radius system concept uniquely combines either throughfeed or batch processing with minimum space requirements. One pass is about 8.5 m long and the container is 3.2 m wide, so that even very long components can be ground or deburred without any problems. TECHNICAL DETAILS Speed: 172 rpm Grinding wheel: RSG 6/6 D Measuring surface: 105.60 m² Workpiece: Camshaft carrier Noise level: 89.5 dB Input width: 630 mm Output width: 350 mm Input height: 1480 mm Discharge height: 1450 mm Continuous flow system; R 400/9 LR Centrifuge: Z 800 K-HA Dsb Ejt Su E Njlz Rwsut MACHINE DETAILS Drive power vibrator: 22.0 kW Year of construction: 2005 Drive power centrifuge: 5.0 kW Year of construction: 2017 Supply voltage; 400 V, 50 Hz, 3Ph/N/PE Nominal power: 6.0 kW EQUIPMENT - Water treatment incl. centrifuge and automatic dosing system - Control cabinet for the machine control - Hand lever valve for the separating flap - Central lubrication system

Condition: excellent (used), The Thermo Scientific Heraeus Biofuge Primo R centrifuge enables high-throughput and low-throughput processing with optional rotors and accessories and a maximum speed of up to 15,000 rpm. This compact, high-performance refrigerated centrifuge provides efficient and flexible sample processing. The Primo R features automatic rotor recognition and unbalance detection with uniform temperature control. The Primo R is ideal for small medical laboratories, biochemical and molecular biology research, and routine analysis in industrial laboratories. Typical applications include sedimentation of cells (algae, yeast, bacteria, etc.), sedimentation of cell organelles and cell fragments, preparation of DNA samples and protein precipitates, blood and urine analysis, and centrifugation of standard test series in microliter tubes. This refrigerated centrifuge is equipped with a fixed angle and tiltable rotor. Technical specifications: Voltage: 220-240 V Current: 2.9 A Power: 490 W Maximum centrifuge speed: 15,000 rpm (adjustable in increments of 10) Minimum centrifuge speed: 300 rpm Maximum RFC Weight: 21855 g Temperature range: -9...40°C Noise level at maximum speed: < 60 dB Rotor recognition: automatic Unbalance recognition: electronic Safety features: lid lock and interlock Rotor specification 1: Number: 7591 Type: swinging bucket rotor Maximum speed: 4000 rpm Maximum RCF: 2585 g Maximum capacity: 4 x 100 mL Dujb Elet Eva Ijz Rwst

Condition: excellent (used), Year of construction: 2019, operating hours: 540 h, Functionality: fully functional, working width: 750 mm, area performance: 4,800 m²/h, overall weight: 730 kg, warranty duration: 12 months, water tank capacity: 120 l, HAKO SCRUBMASTER B120 R TB750 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) 2019 year of production Machine mileage is 540 hours 750mm cleaning head (TB750) equipped with two new medium-hardness disc brushes, enabling work on any surface. New polyurethane astringent rubbers, resistant to contact with oil liquids, greases and petroleum derivatives. New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable drain hose and a new suction hose The new suction turbine ensures high water suction power from the squeegee Each device offered by us has individually taken photos, you buy exactly the machine you see Dusb Elet Sdpkoz Rwet TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 750 Suction width (mm): 950 Theoretical capacity (m²/h): 4800 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready for work (kg): 730 Climbing ability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW 380mm PPL 0.5 disc brushes Suction bar with new oil-resistant rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very agile. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (750mm) ensures high surface efficiency A very legible and intuitive control panel

Condition: excellent (used), Year of construction: 1998, overall weight: 80 kg, No defects. Without defect. No defects, hidden defects as well. All functions work. Adjustable speed, adjustable temperature Speed- RPM depends on the equipment, mx 3500 / max 4500rpm Temperature- -5 / +40 Dueb Elzeq Iixco Rwet Transportation on a standard pallet; 1200x800mm Mass; 80kg Loading and packing is free. VAT is not included.

Year of construction: 2024, Condition: new, The Ball mill is ideal for grinding hard, brittle, hard-tough materials such as ceramics, clinker, building materials, glass, minerals, ores, minerals, silicon, slag and many more. Dob Eogchbmolz Rwjut

Condition: new, Year of construction: 2025, Functionality: fully functional, Equipment: documentation/manual, We produce the “R-PRO 25” Standing Seam Metal Roof Machine with the highest precision on the latest technology CNC processing machines. With the user-friendly, strong, durable and robust “R-PRO 25” Standing Seam Profiling Machine, you can perform your standing seam applications in a quality-oriented manner. Dob Elzohpuhto Rwsut As REIS STANDING SEAM TECHNOLOGIES; we always support our customers with spare parts on stock, from production to assambly, from sales to technical service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a R-PRO 25 standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO 25” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate 2 years of warranty Strong management. Loyal, highly trained team. "R-PRO 25" Features - Standard standing seam height 25 mm - Weight: 195 kg - You can transport with small cars - You can lift it to the roof easily - You can seperate it to four pieces for carrying easily (Standart) - Cabled remote controller (Standart) - Emergency stop button (Standart) - Forward and backward button (Standart) - Material width adjusment (250 mm – 700 mm) (Standart) - Wheels (Locking feature) (Standart) - Ribbing Attachments (Optional) - Dijital Encoder (Optional) - Circular Saw (Optional) Please contact us for more information and prices...

Condition: used, Functionality: fully functional, Year of construction: 2007, operating hours: 5,275 h, load capacity: 1,400 kg, lifting height: 7,255 mm, fuel type: electric, mast type: telescope, gearing type: automatic, battery capacity: 560 Ah, battery voltage: 48 V, fork carriage width: 80 mm, fork length: 1,150 mm, overall weight: 3,000 kg, color: orange, Equipment: cabin, head guard, lighting, The Linde R14 S is a powerful and reliable reach truck that is ideal for use in warehouses and logistics centers. With its high load capacity and impressive lifting height of over 7 meters, it offers maximum flexibility and efficiency, even in confined working areas. The ergonomic design ensures comfortable and safe operation. Perfect for warehouses, logistics centers and companies looking for a reliable forklift solution. The truck is in good condition and fully functional. Comprehensive maintenance was carried out efficiently about three months ago, so it is ready for immediate use. Model: Linde R14 S Year of manufacture: 2007 Dob Elzovc T Rce Rwsut Operating hours: 5275 hours Lifting capacity: 1400 Lifting height: 7225 mm Battery type: Lead battery 48V/ 560 Ah Condition: Used 💰 Price: 15550 📍 Location: Trieben