Used All-Kor Akb S220 for sale (56,026)

Condition: new, overall weight: 3,500 kg, empty load weight: 1,450 kg, maximum load weight: 2,050 kg, loading space length: 4,900 mm, loading space width: 2,070 mm, loading space height: 2,300 mm, tire size: 185r14c, *ChevalLiberte model MAXI4 4 horse trailer with inclined loading. *Front exit, walk-in tack room, sloping loading, aluminum walls* and *aluminum floor* combined in a rot-proof* aluminum horse trailer*. * *Aluminum horse transporter for up to four horses with excellent driving characteristics thanks to the Pullman 2 chassis! The comfort chassis of the aluminum horse trailer was developed by Cheval Liberte. *The entry height of 45 cm, independent suspension, trailing arms, coil springs and shock absorbers ensure excellent driving comfort. Safe loading of the horses thanks to a flat ramp, which can also be set up as a door, reduces the risk of injury when loading. In addition, pallets can be loaded easily and the trailer is easier to clean thanks to the folding door system. Thanks to the *diagonal position* of the *horses* and the *front exit* in this *horse transport trailer*, you always lead your horses forwards. The adjustable *partition walls* with *head grids* separate and secure the horses. Each *partition* is adjustable and telescopic so that different sized *horses* can also be accommodated. An adjustable side ventilation flap with lifting aids provides fresh air on the showground. A very large *accessible tack room* offers enough space for saddles and changing. The *four-horse trailer is equipped with an inclined position, partition walls with head grille, front exit,* walk-in *saddle compartment*, *poly hood* available in various colors, *aluminum walls*, *aluminum floor*, *entry door*, *hatch* and *door system*, *Pullman chassis-2*, *100km/h*, *interior light*, *automatic support wheel*, *sliding window*, *spare wheel*, hay rack on the left on the ceiling, two roof vents in the hay rack, *stable frame, V-drawbar* and so on. *Inexpensive horse trailer accessories such as additional *tie bar*, *two-wing door instead of ramp*, *feed bucket*, *drawbar hood, anti-theft device* and *scratch mats* are also available. --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! Djb Hc Asipktysx Nout for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: used, mileage: 164,000 km, power: 235 kW (319.51 HP), first registration: 02/2013, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x2, maximum load weight: 10,310 kg, empty load weight: 15,690 kg, wheelbase: 4,000 mm, brakes: engine braking, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 4, Equipment: ABS, air conditioning, cabin, central locking, cruise control, onboard computer, power assisted steering, soot filter, * German vehicle * Rare as 4 seater * Condition see photos * Body from premium manufacturer Haller with C-Trace Ident System * Cost savings through automatic registered emptying of waste containers and optimization of logistical processes * Haller type M21 x2C * Waste collection container with press * Collection container volume 21 m³ Dobsvhpv Es Hc Ax Nsut * Zoeller filling * Type Delta 2301 Premium * Suitable for all containers from 80-1,300 liters * L-comfort cab with 4 seats and low entry * Air conditioning * Auxiliary heating * Seat heating * leaf air suspension + lifting and lowering * Liftable trailing steering axle * Central lubrication system * Engine brake * Differential lock * Multifunction steering wheel * Cruise control * Reversing camera * Comfort driver's seat, air suspension * Hands-free system * Heated electric mirrors * Electric windows * Sun visor * Wheelbase: 4,000+1,350 mm * max. gross vehicle weight: 26,000 kg * Unladen weight: 15,690 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: reconditioned (used), HEIDELBERG KORD, size 46/64 cm, long cab, overhauled, fully carterized, up to standard. Dusb Hc Aoqaggzsx Net

Condition: ready for operation (used), machine/vehicle number: 3148, Centre height: 125 mm Duob Hcsl Ra T Nj Ax Net Spindle bore: 36 mm Speed range: 700/1100/1200 rpm Drive motor: 380 V, approx. 0.6 kW Space requirement: 1100 x 700 x 1250 mm

Condition: new, Reglaj Attachment( Ballast Leveling Bucket) Designed to improve sub-rail stability, our Reglaj Attachment is used for ballast leveling operations. Deb Hcev Spfzo Ax Njut For more detailed information, please feel free to contact us.

Condition: ready for operation (used), Condition Used Stock Number 413086 This listing is for a Sartorius Stedim Palletank Cubical Jacketed-Mix 200L Storage Tank. The unit is in full working condition and is ready for immediate release. Unit is supplied with x2 Sartorius 200L STD Plastic Palletank and dolly. The Sartorius Stedim Palletank Cubical Jacketed-Mix 200L is a high-performance storage and mixing solution designed for biopharmaceutical applications. Engineered for compatibility with Sartorius single-use mixing systems, this temperature-controlled stainless steel tank provides efficient liquid handling, precise temperature control, and optimized mixing performance. Key Features:Jacketed Temperature Control – Ensures precise heating or cooling for sensitive bioprocess applications.200L Capacity – Ideal for medium-scale liquid storage and mixing in GMP onomic Design – Front doors allow for easy bag installation and port gates facilitate tubing and sensor egrated Pro Mixer Compatibility – Railed port enables quick coupling of the mobile Pro Mixer drive unit in under a imized Draining System – Sloped bottom board ensures high product recovery without manual bag ghing Function Option – Allows for precise volume control, preventing aggregate formation and ensuring product ual Inspection Windows – Side windows enable real-time process monitoring during face Finish Options – Available in Bead Blast or ASME #4 brushed finish for enhanced corrosion resistance and cleanability. Specifications: Model: Palletank Cubical Jacketed-Mix 200L Capacity: 200 Liters Material: Stainless Steel Jacket Type: Temperature-Controlled Jacket Mixing Type: Integrated Pro Mixer Compatibility Drainage System Sloped Bottom for High Recovery Application Storage Mixing for Bioprocessing Compliance GMP, Biopharma Standards Dob Hjvyvt Uoc Ax Nsut Benefits:Precise Temperature Control – Maintains optimal conditions for biologics and cell culture icient Mixing – Designed for homogeneous blending of process liquids, buffers, and anced Process Control – Weighing and volume control prevent aggregate y Integration – Compatible with Sartorius Flexsafe® Bags Biostat® onomic User-Friendly – Front door access and port gates for seamless tubing and sensor able Hygienic – Stainless steel GMP-compliant construction with highly cleanable surfaces. Applications: Biopharmaceutical Manufacturing Cell Culture Media Preparation Buffer Reagent Storage Vaccine Protein Processing

Condition: defective spare-parts repository (used), overall weight: 36,000 kg, empty load weight: 5,960 kg, axle configuration: 3 axles, wheelbase: 1,310 mm, loading space length: 8,700 mm, loading space width: 2,350 mm, loading space height: 2,000 mm, loading space volume: 40 m³, first registration: 08/2018, next inspection (TÜV): 02/2026, tire size: 385/65 R22,5, Equipment: ABS, Color RAL 2002 blood orange Disc brake EBS Payload 30,040 kg Air lift suspension Floor 7 mm - walls 5 mm BPW axles Plastic floor Lifting and lowering device Foldable underrun protection Dob Hc Axsv Efwye Njut Grain pusher Platform Alcoa alloy wheels ACCIDENT VEHICLE Errors excepted

Year of construction: 2012, Condition: good (used), Functionality: fully functional, For sale is a CFT compact filter technic top-mounted dust extraction system, type HKAF 12-30 The system is fully functional and ready for use immediately after connection All documentation for the system available thanks to CFT Digital Contact details can be passed on after purchase. Technical data: Year of construction: 2012 Length: 2476 mm Width: 1277 mm Height: 2330 mm Weight: 600 kg Exhaust air flow rate: 28 m3/min Filter elements: 12 pieces Filter area: 30 m² Filter material PMB 600*500 Dsb Horfcpmjc Ax Njut Shock valves: 4 pieces Rotary cycle control unit: 12 cycles Compressed air parameters: 4.5 bar Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2015, Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph The Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph, model Rekord 14000 TC, provides an advanced technical solution for applying and fastening 4-wire cages on bottles of sparkling wine. Moreover, this machine ensures high productivity and precision, making it particularly suitable for high-volume bottling lines. Technical Features The wirehooder features an automated rotary system that handles up to 14,000 bottles per hour (bph). Consequently, this high-speed capability optimizes production lines, maintaining a steady flow of bottles and minimizing downtime. Robino & Galandrino, a leader in bottling machinery, designed and manufactured this model in 2015, ensuring it delivers reliability and durability for intensive use. Additionally, the rotary system guarantees uniformity and reduces operational inefficiencies. Functional Specifications of the Robino & Galandrino wirehooder The Rekord 14000 TC model operates with 12 application heads, each designed to distribute and fasten 4-wire cages precisely. Furthermore, the system applies the wire cage securely, keeping the cork firmly in place. It also supports bottles of sparkling wine, meeting strict technical and quality requirements. Dobevuru De Hc Ax Neut In terms of integration, the machine operates clockwise (left to right), allowing seamless incorporation into most existing bottling lines. For this reason, many producers find it highly adaptable to various production setups. Safety and Condition The machine integrates advanced safety features that protect operators and reduce the likelihood of mechanical failures. As a result, this equipment ensures not only reliability but also peace of mind during operation. The equipment remains in storage, ready for immediate deployment into a production line. Applications The Used Automatic Rotary Wirehooder Robino & Galandrino Rekord 14000 bph meets the demands of sparkling wine and champagne producers who require high-performance equipment. Therefore, its high-speed operation enables wineries or industrial facilities to handle significant bottle volumes efficiently. In particular, its technical capabilities cater to high-demand production environments. Operational Advantages The machine achieves high productivity, processing up to 14,000 bottles per hour. The 12 application heads ensure precise and uniform fastening of wire cages. The clockwise configuration integrates easily into existing production setups. The integrated safety features enhance operator protection and equipment reliability. Bottle diameter from 55 mm to 125 mm Conclusion This Robino & Galandrino wirehooder delivers reliable and high-performance functionality for bottling operations. Moreover, its technical features and precision make it an excellent choice for producers seeking to optimize their bottling lines. Consequently, this machine addresses the need for efficiency, safety, and adaptability. Therefore, it represents a long-term investment for any production facility aiming to enhance its operational output. Ultimately, the Rekord 14000 TC wirehooder proves itself as a top-tier choice in the bottling industry.

Condition: good (used), Year of construction: 1999, operating hours: 95,239 h, Functionality: fully functional, machine/vehicle number: 173937, clamping force: 2,000 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, total length: 5,100 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,630 kg, Equipment: documentation/manual, The machine ran perfectly until the last day before the new machine was delivered to us. The machine is therefore in good used condition. Due to a lack of space in the injection molding shop, the machine is being sold and is no longer powered. The pump / injection unit / clamping unit are sealed. The machine manual is available Videos of the machine are available Dujb Hcov D Nxls Ax Net Pump operating hours: 95239 Automatic operating hours: 86082 Repairs from recent years: Filter replaced annually 05/2024 Fan in the control cabinet replaced 07/2023 New valve for Y201 and Y210 nozzle forward/backward 02/2023 New keypad installed. Field with motor and heater 12/2022 Ejector sealed. Injection unit sealed including new piston

Condition: excellent (used), mileage: 398,000 km, power: 441 kW (599.59 HP), first registration: 08/2010, fuel type: diesel, color: beige, axle configuration: 8x6, tire size: 385/65R22,5, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2010, Equipment: sleeping cabin, = Additional Options and Accessories = - Leaf Spring Suspension - Air Suspension - Radio/CD Player - Sleeping Cabin - Sunshade - Toolbox - Power Take-Off (PTO) Dsb Heuu Hb Ijc Ax Nout = Remarks = Transmission: Manual Transmission Number of Transmissions: 16 Transmission Model: ZT 440 Torque Converter Color: Red Load Capacity: 375,000 kg Manufacturer: Mercedes Benz Type: Actros MP 3 / 4160 8x4 SLT VIN: WDB9301821L470692 First Reg. 08/19/2010 Odometer: Approx. 398,000 km Engine: V8 / 600 HP / Euro 5 Transmission: Manual ZF Transmission / Low – High Range + Split 16 Gear with Clutch Pedal 8x6x4 Axle 1: Steel suspension / 9000 Kg / Tires 385/65R22.5 Axle 2: Air suspension / 8000 kg / Tires 385/65R22.5 Axle 3: Steel suspension /13,000 Kg / Hub Reduction / Tires 315/80R22.5 Axle 4: Steel suspension / 13,000 kg / Hub Reduction / Tires 315/80R22.5 GVW: 41,000 kg GCW: 5th Wheel Use / 250,000 kg Pull Coupler Use / 375,000 kg Additional information: Push Front Coupler Rear Rockinger RO56E coupler Jost JSK 38 5th wheel mounted on a sliding frame Toolboxes fitted behind the cabin ZF Retarder ZF 440 Torque Converter PTO + Hydraulic Pump Counterweight box loaded with 15 tons of steel for extra rear axle pressure Tractor Fuel Tank Volume 1,000 liters = Further information = Drivetrain Fuel tank: 1,000 liters Transmission Transmission: Manual ZF Transmission / Low – High Range + Split 16 Gear with Clutch Pedal, 16 gears, manual transmission Axle configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 9,000 kg; Steered; Suspension: Leaf springs Rear axle 1: Tire size: 385/65R22.5; Max. axle load: 8000 kg; Reduction: Outer planetary axles; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13000 kg; Reduction: Outer planetary axles; Suspension: Leaf springs Rear axle 3: Tire size: 315/80R22.5; Twin tires; Max. axle load: 13000 kg; Reduction: Outer planetary axles; Suspension: Leaf springs Dimensions Width: 255 cm Weights Curb weight: 15,920 kg Payload: 250,000 kg GVW: 41,000 kg Condition Technical condition: very good Visual condition: very good Further information Contact Stefan Schaapveld for further information.

Condition: used, axle configuration: 3 axles, wheelbase: 8,960 mm, first registration: 12/2016, suspension: air, Year of construction: 2016, Equipment: ABS, = Other options and accessories = - EBS - Air suspension = More information = Suspension: Air suspension Empty weight: 6,890 kg Payload: 34,110 kg GVW: 41,000 kg Dimensions (L x W x H): 1386 x 255 x 400 cm License plate: OP83NL Contact Emad Al Shogran for more information. Vehicle number: Trailer. 08 Krone Edscha /3 x axles PBW / Accident !!! .: WKESD00000738858 Edscha PBW Empty weight: 6890 Total weight: 41000 Dusbevrt Akj Hc Ax Net Internal dimensions Length: 13.64mm Width: 2.49mm Height: 2.77mm = Company information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: refurbished (used), Year of construction: 2006, AGIECUT Challenge V2, Year of manufacture 2006 Travel paths: X= 350 mm, Y= 250 mm, Z= 256 mm Travel paths U/V axis: +/- 70 mm Maximum conicity: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200/450 kg (in bath / without bath) Deb Hcjvrcm Ss Ax Neut Achieveable surface quality: Ra: 0.2 µm Average contour tolerance Tkm +/- 2-3 µm Available wire diameters: 0.15 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup AGIEVISION 5 control AGIE IPG-V generator Dimensions (length x width x height): 2215 x 2215 x 2220 mm Net weight: 3600 kg The machine is cleaned, overhauled and tested by us after receipt of the order. After completion, we will provide you with training on your machine in-house. We will then prepare the machine for transport. We can also offer you the following as an option: - Transport - Commissioning - Cooling unit - CAM software

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical posts. 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Dusbjg Hzxio Hc Ax Net Double belt speed (40/80 m/min.).

Condition: excellent (used), Year of construction: 2005, Arburg ALLROUNDER 720 S 3200-2100 injection molding machine Year of manufacture: 2005 Closing unit Closing force: 3600 kN (increased at the factory) Clamping force: 130 kN Opening force: 100 / 800 kN Max. opening stroke: 700 mm Minimum mold height: 300 mm Max. distance between clamping plates: 1000-1400 mm Clearance between columns: 720 x 720 mm Dimensions of mold clamping plates: 1040 x 1040 mm Max. weight of the moving mold half: 3300 kg Ejector force: 100 kN Ejector stroke: 250 mm Hydraulics, drive, other Hydraulic pump drive power: 55 kW Total installed power: 88.9 kW Control cabinet Safety standard: DIN EN 60204 Socket set: 1 x 16 A Injection unit Screw diameter: 70 mm Screw working length (L/D): 20 Cylinder capacity: max. 280 cm³ Injection volume: max. 1078 cm³ Injection weight (PS): max. 984 g Injection pressure: max. 2000 bar Screw speed: max. 51 rpm Dueb Hc Aev Etacsx Net Screw torque: max. 2247 Nm Nozzle pressure force: max. 90 kN Nozzle stroke: max. 600 mm Installed power of cylinder heaters: 6 x 4500 + 3300 W Installed power of nozzle heaters: 1000 W Machine dimensions and weight Net weight: 17000 kg Electric power supply: Motor + heaters: 125 A Heaters: 50 A Additional options Servo control technology with 2 control pumps Interface for robot system (according to EUROMAP 67, 50-pin) Electric axis control Interface for mold temperature control Interface for V24 printer Interface for PC keyboard ARBURG AES energy saving system Software package "Additional monitoring functions" Software package "Additional machine movements" Software package "Production control" Machine optimization / user support package Software package "Quality assurance" Documentation package

Condition: good (used), Year of construction: 2016, Functionality: fully functional, type of input current: three-phase, nominal voltage: 415 V, frequency: 50 Hz, nominal current: 38 A, nominal frequency: 50 Hz, nominal power: 20 kW (27.19 HP), nominal power (apparent): 20 kVA, primary voltage: 380 V, secondary voltage: 380 V, Equipment: type plate available, Computer room UPS in very good condition (discontinued) Riello UPS MST 20 S2 20kW / 20kVA Input : 380-415V 3W+N+PE 50/60Hz Dob Hc Asvzlk Sex Nsut Output : 380/400/415V 3W+N+PE 50/60Hz

Condition: used, Year of construction: 1996, 6-row maize drill / single grain drill / Dusb Hcsqrrrve Ax Net

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, table swivel +6/-3.5 degrees, Deb Hcjtudfdj Ax Nout workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Djbsixt I Hj Hc Ax Nsut Speed controlled. Space-saving. Inexpensive. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: new, With the model ZIMMER Z125/R we offer a small and handy metal band saw for professional use: Infinitely variable speed regulation Saw arm swivels up to 60° to the right Band guide with 8 ball bearings Djb Hcjg Im Syj Ax Nsut Very smooth running Weight 19kg Inclusive 1 saw band (1.440 x 13 x 0,65) Technical data: Motor power 230V / 1,0kW Cutting speed 30 - 80 m/min. Saw band dimensions 1.440 x 13 x 0,65 mm weight 19 kg Order number Z125/R Cutting data Round material Square Rectangle 0° 125 80 80 mm 45° right 125 x 125 80 x 80 50 x 50 mm 60° right 130 x 125 80 x 80 80 x 80 mm

Condition: new, gearing type: other, fuel type: gasoline, color: red, emission class: none, suspension: other, driver cabin: other, Equipment: crane, - 3x attachment from 2700 EUR plus VAT - Timber grapple for truck loader cranes complete incl. rotator, mounting plate etc. - Price EUR 2700 plus VAT - Immediately available from Bad Salzuflen, collection or shipment by forwarding agent possible - Opening width 77- 1300mm - 92 kg weight - max. 250 bar pressure - Dimensions A:1300 W:326 H1:625 H2:444 D: 77 mm - Subject to errors and prior sale - - Scrap grab / scrap spider for truck loading cranes complete incl. rotator, mounting plate etc. - Price EUR 3300 plus VAT - Immediately available from Bad Salzuflen, collection or shipment by forwarding agent possible - Opening width 1180 mm - 95 kg weight Dusb Hc Axst Idxqo Njt - max. 250 bar pressure - Dimensions A: 735 B:1060 C:1180 D:600 E:435mm - Subject to errors and prior sale - - Clamshell bucket for truck loading cranes up to approx. 1.6m/t and excavators up to approx. 5t. Purchase price incl. rotator mounting plate etc. - Price EUR 2900 plus VAT. - Immediately available from Bad Salzuflen, collection or shipment by forwarding agent possible - 125 liter capacity - 120 kg weight - max. 200 bar pressure - Opening 1200mm - (B) Outer dimension open 1200mm - (C) Outer width 450mm - (A) Outside dimension closed 840mm - (D) Height open 523mm - (C) Height closed 660mm - Subject to errors and prior sale ... VAT shown, crane, new, consumption: 0.0/0.0/0.0 l/100 km (combined/in/out)

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: PO201200633, Anko, used dough sheet making machine, model: ABS-220, serial number: PO201200633, MFG: 2012-08, made in Taiwan, 380 V, 3 Ph, 50 Hz, 2.25 kW, sheet roller width: 220 mm, thickness dough: 4 - 12 mm; plastic dough belt can be ajusted, belt width: 250 mm, total dimensions: 1850 mm x 1020 mm x 1520 mm. With add-on equipment and mechanism, it can also produce noodles The Anko ABS-220 is an automatic dough sheeter, part of a broader range of equipment designed for heavy-duty use in food production. This particular model is suitable for various baking and pastry applications, emphasizing efficiency and consistent performance. It features automatic functionalities, likely including precise roller adjustments and easy cleaning capabilities, making it a practical choice for enhancing production lines in professional environments. The ABS-220 model fits within a context of tools aimed at simplifying and speeding up the preparation processes in commercial kitchens and bakeries. Dsb Hc Axsvwg Nnj Nsut Price 19.900 Euro + VAT, FCA Oradea, Romania Video: Irrtum, Anderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch/Beszélünk magyarul/Nous parlons français/Vorbim romana.

Condition: used, Functionality: fully functional, machine/vehicle number: 910xxxxx, Year of construction: 2014, operating hours: 6,271 h, load capacity: 1,000 kg, lifting height: 6,500 mm, free lift: 2,058 mm, fuel type: electric, mast type: triplex, construction height: 2,700 mm, fork length: 1,150 mm, total length: 1,640 mm, drive type: Elektro, construction width: 1,120 mm, net weight: 3,302 kg, Reach truck Dusb Hevzuu Hoc Ax Nst Chassis number: 910xxxxx Load centre of gravity: 600 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Gearbox: AC-Impuls Condition: Reconditioned without guarantee Technical condition: very good Front tyres type: Polyurethane Front tyres size: load rollers polyurethane single Front tyres condition: 80 - 100% Rear tyres type: Polyurethane Rear tyres size: drive wheel polyurethane Rear tyres condition: 80 - 100% Battery voltage: 48V Battery Ah: 620Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2014 Description: serviced, technically and visually refurbished, all wheels are replaced, UVV approved, without warranty/liability for material defects Side shift, integrated 3rd valve, pulse control, full free lift, safety light, joystick, multi-pilot, discharge monitor, hour counter, battery (01/2014) with Aquamatik, external charger suitable, fabric seat, all wheels are replaced

Condition: used, mileage: 704,552 km, power: 187 kW (254.25 HP), first registration: 12/2013, fuel type: diesel, number of seats: 43, gearing type: automatic, next inspection (TÜV): 03/2025, emission class: euro6, color: white, Year of construction: 2013, Equipment: ABS,

Condition: used, overall weight: 38,500 kg, empty load weight: 5,000 kg, maximum load weight: 33,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,549 mm, first registration: 09/2019, suspension: air, color: black, tire size: 385.65 r 22.5, Year of construction: 2019, machine/vehicle number: 3, Equipment: ABS, serious extendable container porrtacontainer semi-trailers, year 2019, 3 saf disc axles with 1st liftable, front and rear double extension extendable chassis by joining the extensions with central beam, transports containers from : 1 x 20 flush post 1 x 20 flush post over neck, 1 x 30, 1 x 40, 1 x 45, hi cube and swap bodies from 6.0m to 13.60m, ship hooks , ADR complete, n°3 equal units available except sold-CONCESSIONARY INTERDRIVE SRL-PARMA Dusbjqvl Sfo Hc Ax Njt