Used All-Kor Akb S180 for sale (56,100)

Condition: new, Metallkraft RB 54 mandrelless tube bending machine Cgsb Eefdr Saexni Rst NC-controlled, with large program memory. NC control for setting the bending angle. High quality, robust construction Up to 50 programs can be stored Fast tool change Purely motorized drive Automatically returns to starting position TECHNICAL DATA: Bending radius max. 125mm Bending angle max. 210 Bending speed(s) 2rpm Torque 2341Nm length (product) approx. 600mm width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending capacity tube material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending capacity tube material 650 N/mm² (Ø x wall thickness) 42 x 3mm Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Note: Substructure optionally available

Condition: excellent (used), Year of construction: 2014, Year of manufacture: 2014 Manufacturer: Challenger Type: Microcut MN 430 3-axis vertical machining center Control: FAGOR 8055 M i/A control Spindle: 8000 rpm Travels: X 760 mm, Y 430 mm, Z 390 mm Max. rapid traverse: 24 m/min TABLE AREA: Dimensions: 900 mm x 410 mm T-slots: 16 mm x 4 mm x 100 mm Max. payload: 350 kg TOOL CHANGER Max. tool length: 200 mm Max. tool diameter: 100 mm Max. tool diameter with free adjacent positions: 130 mm Max. tool weight: 8 kg Cgsb Exev Rbnfjni Rot Tool change time: 10 seconds Max. number of tools: 24 (upgrade from 16 to 24)

Condition: excellent (used), Industrial Washing Machines Ltd washing machine for Dolav Bins / Pallet Boxes Type: DC20 DOLAV WASHER Serial number: 634-DC20 A/135/02R Year of construction: 05/12/2005 Csb Esv T D Awsxni Rsgt Inside dimensions: 1500 mm x 750 mm x 1200 mm Total dimensions: 2300 mm x 2000 mm x 2500 mm. Heat source is steam or hot water supply

Condition: ready for operation (used), Allmatic NC 125 High-Pressure Vice Jaw width: 125mm Clamping width: 214mm With base plate for vertical work. Total length without base plate: 450mm Total length with base plate: 505mm Height: 145mm You are welcome to come by for a viewing. We are happy to arrange a cost-effective shipping service for you. You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description purposes. Cgobjwc At Ej Exni Rot Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm tool taper SK 40 Cjbot Tqw Do Exni Regt control HEIDENHAIN TNC 124 total power requirement 3 kW weight of the machine ca. 1550 kg dimensions of the machine ca. 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

Condition: excellent (used), Year of construction: 2017, ALZMETALL 5-axis CNC Vertical Machining Centre Cgobswb A A Rj Exni Rjt Type:GS600 E/5 Year:2017 Control:HEIDENHAIN TNC640 XYZ travel:460x600x400mm Spindle speed:18000rpm Spindle taper:HSK-A63 Toolchanger:76atc Rotary table:400x400mm A-axis:±140° C-axis:360° Max. table load:500kg Distance from spindle to table top:150-550mm Machine weight:6800kg Only 5800 working hours With Renishaw Reason for sale: Factory is considering automating production, and the automatic fms system is not compatible with the machine Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: new, Metallkraft PRM 60 FH Hydraulic Ring Bending Machine Can be used horizontally and vertically for profiles, pipes and solid material. Heavy welded steel construction Cob Esdairtexni Rogt Horizontal and vertical working possibility Hydraulic feed of the upper roller Digital display for infeed roller All 3 rolls driven and hardened Lateral straightening rolls, infinitely adjustable Separate control panel with foot control Special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials TECHNICAL DATA: Length (product) approx. 1000mm width/depth (product) ca. 1400mm height (product) approx. 1650mm Weight (net) approx. 950kg Bending capacity see data sheet Power drive motor 1,5kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 215mm Shaft diameter bottom 215mm roller diameter top 60mm roller diameter bottom 60mm Speed 4m/min Hydraulic pressure 16t SCOPE OF SUPPLY: Standard bending rolls mobile foot pedal for left-right rotation with emergency stop straightening rolls digital display for infeed roller Hint: Please specify material type to be processed when ordering! NC control Art. No. 3880163: Only possible ex works Optionally the machine can be equipped with bending rolls especially for your needs Also untypical sizes can be made on request

Condition: excellent (used), Year of construction: 1985, Column Drilling Machine ALZMETALL AX2 Cone: CM2 Spindle exit: 100 mm Rotation: from 200 to 500 RPM Table size: Length 370 mm x Width 350 mm Cgeb Exnijv Dirle Rot Year of construction: 1985 Maxi distance spindle nose/table: 480 mm Throat depth: 250 mm 2 R5247921 speeds motor Voltage: 380 V Width: 500 mm Depth: 900 mm Total height: 1700 mm Weight: approx 250 kg

Condition: excellent (used), Model: PHT 140 400 vibrating trough Cob Esv A Tzbjxni Rsgt A metal detector Height: 140 Width: 440 Power: 30kW

Condition: used, Year of construction: 2009, cutting diameter 290 mm dimensions of saw-band 3100 x 27 x 0,9 mm cutting width 320 mm cutting speed 20 - 100 m/min 290 mm stroke back stop 290 mm cross-slide 290 x 320 total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,7 x 1,0 x 1,5 m Band saw - semi-automatic - double miter Cgeb Exnowb Hzqji Rst - infinitely variable band speed

Condition: good (used), Functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Table surface, 880 x 670 mm--- throat depth: 385 mm--- Cgeb Eov S H Tcexni Rjt

Condition: good (used), Year of construction: 1998, CNC MACHINING CENTER ALZMETALL BAZ 15, Year of manufacture: 1998 Technical specifications: X: 600 mm Y: 400 mm Ceb Exsv Rnyzsni Rjgt Z: 600 mm Table: 750 x 450 mm Main spindle: 10,000 RPM Control: Siemens Sinumerik

Condition: new, Metallkraft PM 10 M punching machine with automatic operation and 10 t pressing force DESCRIPTION: For precise punching and cutting work due to powerful eccentric mechanism Two working modes selectable: Automatic mode: the machine performs 30 cuts per minute, saving time when processing workpieces with several identical punch cuts. Manual mode: The machine makes one cut after pressing the foot switch. Illuminated work area - Storage for punching and cutting tools in the base frame - Recesses in the base for easy transport with forklift truck - Tools must be ordered separately depending on the application, not included in the scope of delivery Dimensions and weights: Length (product) approx. 680mm Height (product) approx. 1400mm width/depth (product) approx. 430mm Weight (net) approx. 250kg Electrical data Power drive motor 2,2kW Type of current AC Supply voltage 400V Mains frequency 50Hz Phase(s) 3Ph Punching station Punching pressure 10t OTHER MODELS PLEASE REQUEST Cgjb Exnegplf Ssi Ret

Condition: good (used), Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Cgjbsi Tvv Ao Exni Rst Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg

Year of construction: 2016, Condition: used, Print Width: Up to 340 mm Maximum Print Speed: Up to 200 m/min Material Unwinder - Front loading - Transport device with tape tension measurement - Max roll diameter: 1000 mm - Pneumatic spindle - Controlled unwind tension via adjustable dancer - Adjustable unwind tension - End of roll detection - Joining table - Ultrasonic edge control - Mobile touch screen control panel - Centralized machine infrastructure control Corona Treatment - 1.5 kW generator - Pre-treatment head - Includes exhaust fume outlets Multi-process base unit - Robust construction with granite base - Accommodates two process stations - Two base platforms for flexo printing or die-cutting groups - Manual diagonal register adjustment for each station - Includes paper path extension in the last station for varnishing - Interface for connecting cooling water and compressed air - Includes decentralized control Flexo Printing Unit - Flexo printing unit with aluminum sleeve cylinder - Refrigerated counter-print cylinder - Direct servo drive for print and counter-print cylinders Rotary Screen Printing Unit - Dual servo drive for format length adjustment and correction Upper Rails for Multi-Process Unit - Upper rail without control interface, compatible with laminating devices and waste rewinders. UV Drying System (9 positions) - Continuous power control relative to machine speed Die-cutting unit Cgobswcc A He Exni Rot Rotary Die-Cutting with Front Loading (with cutting depth adjustment) Waste Rewinder Plus

Condition: good (used), Functionality: fully functional, bending angle: 180 °, total length: 7,000 mm, total height: 1,500 mm, total width: 2,000 mm, overall weight: 7,500 kg, pipe diameter: 133 mm, wall thickness: 6 mm, shaft diameter: 82 mm, Pipe bender , max 130mm wall 6mm , very many accessories Cgob Exjucprdeni Rot

Condition: good (used), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tie rod cylinder Cgeb Exov N D H Uoni Ret -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, - 5 printing units (UV flexo printing) - Conventional doctor blades with dip roller - 1x die-cutting unit (magnetic cylinder die-cutting) - Knife unit for side cutting (shear knife) - BST web monitoring system - 1x corona pre-treatment unit - 2x Teknek (top + bottom) Material cleaning device - Maximum web width 280 mm - Sensotec control mark - Core diameter 76 mm Cob Exnieq Nmavo Rjgt - Max. Outside diameter 740 mm (infeed) - Max. Outer diameter 700 mm (outlet) Accessories: - 12 anilox rollers - Magnetic cylinder: Z96, Z98, Z118,

Condition: new, Metallkraft HPS 45 S Hydraulic sectional steel shear/hole punching machine (3819045). Combined machine with up to 5 processing stations and foot operation. DESCRIPTION - Punching station, flat steel shear, angle steel shear, section steel shear, from HPS 45S with notching station - DS-series with two working cylinders and two foot pedals for simultaneous working with punching station and section steel shear - Stepless adjustment of the stroke - Larger throat for punching station with 620 mm optional, from HPS 55DS available - Heavy and stable welded construction - From HPS 45S with notching knife as standard equipment - With powerful 400 volt motor - V-notching knife, oversized punching device and larger throat for punching station available on request - Two-stage foot pedal for inching operation - Standard with MUBEA holder for punch no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional (except HPS 40S) Advantages of punching compared to drilling: - High time saving - cycle times - No chips - No cooling Notice: All hydraulic section shears are supplied with oil Cjb Exnskzk Hvsi Rjgt TECHNICAL DATA Dimensions and weights length (product) approx.: 1500mm width/depth (product) approx.: 950mm Height (product) approx.: 1680mm Weight (net) approx.: 1400kg Notching station Notching station material thickness max.: 8mm Notching width max.: 35mm Notching depth max.: 75mm V-notching tools (accessories): 100 x 100 x 8mm Electrical data Power drive motor: 4kW Supply voltage: 400V Mains frequency: 50Hz Flat steel shear Flat steel shear material width x thickness max: 200 x 15mm Flat steel shear material width max x thickness: 300 x 12mm flat steel shear blade length: 316mm Flat steel shear angle cut 45° side length max. x thickness max: 80 x 10mm Flat steel shear working height: 955mm Punching station Punching pressure: 45t Punching station diameter x sheet thickness max: (steel 400 N/mm²)22 x 15mm Punching station diameter max. x sheet thickness: (steel 400 N/mm²)38 x 8mm Punching station throat: 175mm Punching station stroke max: 50mm Punching station stroke rate: 20/min Punching station working height: 955mm Steel bar shear Steel bar shear capacity round material: 30mm Steel bar shear capacity square material: 25mm Angle steel shear Angle steel cutter cutting capacity 90° L profile: 100 x 100 x 10mm Angle steel cutter cutting capacity 45° L profile: 70 x 6mm Angle steel shears cutting capacity U-I profile (accessory): 80 x 45mm Angle steel shears cutting capacity T profile (accessory): 40 x 5mm Angle steel shear working height: 1140mm SUPPLY - Punching station - Flat steel shears - Angle steel shear - Sectional steel shears with round and square blades - notching station - punch holder with bayonet lock - punch and die reducers no. 1, no. 2, no. 3, no. 30, no. 45 and no. 60 - Punch, flat steel cutter and notcher with adjustable stops - hook wrench - foot pedal - hydraulic oil Made in Turkey OTHER MODELS PLEASE REQUEST

Condition: used, Industrial crane, yard crane, mobile crane, and machine-lifting crane VALLA Type V-Kart 55-E Chassis No. 7373, built in 1983 The crane has electrical problems with the drive control; sometimes the crane won't reverse. The best solution is probably a replacement or upgrade to a new drive control. Maximum load: 5.5 tons. At 1 meter outreach Hook height max. 5 meters without mechanical extension Hook height max. 7 meters with mechanical extension Load capacity: 1 meter outreach 5500 kg (without extension) 2 meter outreach 4000 kg 3 meter outreach 2000 kg 4.6 meter outreach 1050 kg 5.6 meter outreach 0.85 kg Hydraulic extension: 2 m Mechanical extension: 2.6 m - Telescopic boom with 2 hydraulic telescopic sections and a mechanical extension with extension - Can be moved with full load - 24-volt electric drive, driven steering axle with 2 electric motors - 24-volt automatic charger - Retraction width between the front wheels 90 cm - Hydraulic steering - Overhead guard - 4286 operating hours read Length without extension 3000 mm Exterior width at front: 1730 mm Exterior width at rear: 1350 mm Height: 2170 mm Cgob Eoucapyjxni Ret Total weight: approx. 6 tons The crane has electrical problems with the drive control; sometimes the crane won't reverse. The best solution is probably a replacement or upgrade to a new drive control. Price is quoted as is

Condition: ready for operation (used), machine/vehicle number: 532-96103, Half automatic band saw with a cutting range upto 280 mm diameter. Saw length 4318 mm Cgeb Exnjiwlmcji Rst

Condition: used, I-beam length: 4500 mm Total height: 3350 mm Csbev Tm Dqj Exni Rsgt Usable working length: 4000 mm Hook height: 2300 mm Distance between legs: 2900 mm

Condition: good (used), Brake roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: brake roller -Diameter roll: 90 mm Cgsb Exnjq Tvqgei Rst -Transport width: 840 mm -Shaft: Recording Ø20 mm / Ø20 x 12 mm see photos -Quantity: 29x transport rollers available -Price per piece -Total dimensions: Ø 90 x 870mm -Weight: 6.3kg/piece

Condition: new, Metallkraft PRM 40 FH ring bending machine Can be used horizontally and vertically for profiles and tubes with foot operation. Heavy cast construction Hardened bending rollers Shafts made of special steel, hardened and ground Lateral straightening rolls, infinitely adjustable All 3 rolls driven by gears Horizontal and vertical working position Suitable for particularly small bending diameters Cgeb Exnscf D Rbji Rjt Suitable for particularly small bending diameters due to orbitally adjustable lower rolls Mobile control panel with two digital displays for the infeed rolls Straightening rolls suitable for bending angle iron as standard special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials Device for twisting bars Spiral bending tool TECHNICAL DATA: Length (product) approx. 1050mm width/depth (product) approx. 500mm height (product) approx. 1250mm Weight (net) approx. 350kg Bending power see data sheet Power drive motor 1,1kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 35mm Shaft diameter bottom 35mm roller diameter top 137mm roller diameter down 137mm Speed 7m/min SCOPE OF DELIVERY: Standard bending rolls digital displays for infeed rolls mobile control panel straightening rolls substructure

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: Cjb Ejkzk Exexni Regt - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS