Used All-Kor Akb S100 for sale (56,286)

Condition: ready for operation (used), Year of construction: 1989, Functionality: unexamined, machine/vehicle number: 1441, spindle speed (max.): 3,000 rpm, spindle speed (min.): 200 rpm, total height: 1,500 mm, total width: 560 mm, total length: 800 mm, table width: 240 mm, table length: 250 mm, overall weight: 250 kg, With 2 grooves, including frequency converter for stepless speed use. Cslnev Iqqdo Idlujrb

Condition: new, Year of construction: 2025, TECHNICAL DATA Pressing force 30t Crelsi Amnpen Idluob max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: good (used), Technical specifications for the pallet racking system: Rack system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 17,040 mm Number of bays per rack row: 6 Number of levels plus floor level: 6 Technical data for volume: Pallet spaces per bay: 21 Number of pallet spaces per row: 189 Total number of pallet spaces: 189 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 1,100 kg Scope of delivery includes: 10x pallet rack uprights, used Material color: Sendzimir galvanized Upright type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 12,000 mm Depth: 1,050 mm 108x pallet rack crossbeams, used Material color: RAL 5010 Gentian Blue Box profile: 160 x 50 mm Crossbeam type: TRV1-270-160-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,400 kg, with evenly distributed load Note: The functionality of the trusses is guaranteed despite the holes. SSI project with heat shields that were screwed in according to the manufacturer's instructions! Crjlnjwax Iyj Idlusb 216x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental lifting 40x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Version: Carbon steel, galvanized Approved for: Cracked concrete 20x leveling plates, used Version: complete Galvanized for leveling shelf supports that are installed on uneven floors 1x Load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: ready for operation (used), Condition Used Stock Number 47543 Cjlnjuz I E Ae Idlusrb This listing is for 1 of 2 Thermo Scientific Sorvall RC12BP+ Floor Centrifuge Sorvall RC 12BP Plus Centrifuge System specifications: Centrifuge Specifications Maximum speed: 4,700 rpm Maximum RCF: 7,340 xg Maximum capacity: 12 L, 6 x 2000 mL Nalgene Bio-bottles, 12-500 mL quad blood bags Drive: High-performance induction Imbalance detector: 50 gram tolerance Accel/decel profiles: 11 Run time: 1 min. - 99 min 59 sec., continuous operation Temperature control range: -10 to +40 °C Dimensions (H x W x D): 1178 x 800 x 905 mm (46.3 x 31.5 x 35.6 in) Weight 470 kg (1,036 lbs) Control: Microprocessor Programmability: 15 programs Functions: Centri-Log traceability software, ACE, Step-mode runs, slow start/stop Safety features:  Automatic lid lock, imbalance detection, armored guard ring, security key switch 

Condition: used, USA/M5142, Alloy Products pressure vessel 12.7 bar 38°C Cjln Ijq S Tp Ijdlusrb Model: USA/M5142 Type: USA/M5142 Condition: Used

Condition: used, Functionality: fully functional, mileage: 63,800 km, power: 194.17 kW (264.00 HP), first registration: 12/1999, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, fuel: diesel, wheelbase: 3,900 mm, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, suspension: steel, Equipment: ABS, additional headlights, all wheel drive, differential lock, fog lights, hydraulics, parking heater, trailer coupling, MAN 14.264 Fire brigade HLF 20/16 with ALU superstructure and 2-stage built-in pump 24/8 make MAGIRUS Celn Iskmqwhodlujrb max. delivery rate 2400 l/min, electrically retractable fast attack reel with 50 m pressure hose 1660l water tank, light mast with electric light bridge can be folded away to the side, automatic gearbox Hänsch roof warning beam with branch protection, original MARTIN fanfare system, front flashing lights, gallery 6 surrounding lights , Traverse boxes behind rear axle , Fog lights , 230V power supply Aluminum drawers and heavy-duty pull-outs for loading , aluminum roof box , launcher piping and Leader Vector monitor , Triblitz rear flasher , breathing apparatus holder in crew cab , new red/yellow rear warning decals , repainting , rear mount for one-man reel Delivery of the HLF with load on request ! new acceptances if required for an additional charge..... Price basis EXPORT PRICE !

Condition: like new (used), Functionality: fully functional, Year of construction: 2022, operating hours: 5 h, overall weight: 33 kg, total height: 1,300 mm, total length: 1,200 mm, total width: 500 mm, input voltage: 230 V, compressed air connection: 6 bar, type of input current: AC, Dobot Robotics CR10 Cobot Module Van Made Builds custom handling/packing machines & lines for customers all over the world. We build industrial machines, but we also build and install modules with cobots. A case packer, palletizer or handling machine for example. Coln Idjv N Iwqelusrb The now offered Dobot Robotics CR10 on a Stainless Steel frame, can be used for many applications. We can add the right tool, software and integrate it into your facility. Let us know what you are looking for and we will take a look at the possibilities. Framing, HMI and hardware of the offered module is brand new, the Cobot itself has been used for internal tests and for some fairs. It hasnt made any production hours yet. Looking for something else? Take a look at our website to find out what we are capable of. From Case Erector & sealers (Lantech), Conveyors, to Case Packers and Palletizers. Van Made helps you to automate your process in the most compact, efficient and flexible way!

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm Celn Iog U Uv Rodluerb 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: good (used), Technical specifications for the pallet racking system: Rack system: SSI Schäfer Type: PR 600 Technical specifications for installation: Number of rack rows: 1 Length per rack row: 17,040 mm Number of bays per rack row: 6 Number of levels plus floor level: 6 Technical data for volume: Pallet spaces per bay: 21 Number of pallet spaces per row: 126 Total number of pallet spaces: 126 Assuming: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height including pallet: n.d. Weight per pallet (max.): approx. 1,100 kg Scope of delivery includes: 7x pallet rack uprights, used Material color: Sendzimir galvanized Upright type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal braces, upright protectors, and base plates The uprights are pre-assembled (screwed framework) Height: 12,000 mm Depth: 1,100 mm 72x pallet rack crossbeams, used Material color: RAL 5010 Gentian Blue Box profile: 120 x 50 mm Crossbeam type: TRV1-270-125-30 CE Clear width: 2,700 mm Hooks: 5 HK (hooks) Max. load per pair of crossbeams: 3,300 kg with evenly distributed load Note: The functionality of the trusses is guaranteed despite the holes. SSI project with heat shields that were screwed in according to the manufacturer's instructions! 144x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental lifting 28x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 14x leveling plates, used Design: Complete Galvanized for leveling shelf supports that are installed on uneven floors 1x Load plate with information on bay and compartment loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contact person in our company: Mr. Andre Evening Crslnjwaw H Ij Idlueb Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, A complete glulam production line is for sale. The system consists of components from System TM, feeding, finger jointing technology NKT, automation HIT (multi-level storage, transport, patching station, feeding, lamella planer and Kallesoe, etc.), REX planing machines, pre-planer, lamella planer, and finishing planer. Celn Ijwgcchsdlujrb Kallesoe high-frequency press. The extraction system can also be installed. Pictures to follow.

Condition: used, Functionality: unexamined, For details see type plate Crelnov Rdq Ae Idlujb

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Creln Idlowbqf Hjueb Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: new, Year of construction: 2025, For sawing tubes and solid materials made of stainless and tool steelTwo band speeds by means of pole-changing motorRobust gear with hardened and ground shaftPrecise and robust band guides with adjustable carbide platesLonger service life of the saw band due to saw arm inclination of 25°Efficient coolant application to the saw band guidesElectromechanical monitoring of the saw band tension, In case of deviations, a microswitch switches off the machine chip clearing brush for optimum cleaning and maintenance of the saw band function of the semi-automatic machine:Automatic workpiece clamping after the start of the cutting cycleExecution of the saw cut at the selected band speedAutonomous stop of the lowering movement and of the saw band in the lower end positionAutonomous return movement of the saw arm to its upper end positionOperator only has to move the material automaticallyEquipment:Two band speedsCut-off buttonCoolant systemChips clearance brushSaw band tension monitoringSwivelling control panelLength approx.1860 mmWidth/Depth approx.1045 mmHeight approx.1750 mmWeight approx.405 kgPower consumptionPower consumption1.5 kWElectrical dataConnection voltage400 VMachine dataSaw blade speed(s)20 - 100 m/minSpeed steplessSaw blade length2720 mmSaw blade width27 mmSaw blade thickness0,9 mmSaw blade 60 - -45 °Cutting ranges0° round (tube) Celod Hx Uqjn Idluorb

Condition: excellent (used), Year of construction: 1988, Alzmetall AB 30/R-1000 radial drilling machine with 3,0 kW motor Manufacturer: Alzmetall Type: AB 30/R-1000 Condition: used, very good Year of manufacture: 1988 Drilling capacity steel E335 (St 60) 40 mm Drilling capacity cast iron EN-GJL-200 50 mm Thread cutting (St60)* M 30 Thread cutting in cast iron (EN-GJL-200)* M 42 Short spindle MK 4 / MT 4 Stroke motor 0.75 kW 4 feeds 0.15-0.2-0.3-0.36 mm/rev Spindle stroke 160 mm* throat 1000 mm Drive Manual gearbox Motor: n = 1500 min-1 3.0 kw kW 12 Spindle speeds 56 / 80 / 112 / 160 / 224 315 / 450 / 630 / 900 / 1250 / 1800 / 2500 Standard equipment - Electromagnetic feed clutch with overload protection and electric handle cross switching - Clockwise rotation through contactor control - incl. motor protection switch for drive and lift motor - Base plate with T-slots - Protection class IP 54 Special equipment. - Machine light - Thread cutting device - Coolant system - Electrically controlled free-cutting device Cslnswbqfaj Idlusrb - Drilling depth fine adjustment and fixed stop - 2 x cube table 630 x 800 x 500 - Central clamping for drilling slide and boom mechanical and for column pneumatic

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Cjln Iewbqd Njdlusrb Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: good (used), Year of construction: 2011, Functionality: fully functional, ALZMETALL AX 4 / SV Pillar Drill 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: Used Year of Manufacture: 2011 Drilling Capacity: Steel E335 (St 60) 55 mm Thread Cutting: Steel E335 (St 60) M 42 Cast Iron EN-GJL-200 M 56 Short Spindle MT 4 Spindle Stroke 140 mm Usable Throat 300 mm Column Diameter 145 mm Machine Table, Usable Support 615 x 430 mm Spindle-Table Distance min./max. 150/735 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Feed rate 0.1 + 0.3 mm/rev Celjwbqd Asn Idlusrb Machine height: approx. 1850 mm Net weight: approx. 380 kg Infinitely variable drive Motor: 1500 rpm Power: 3.0 kW Spindle speed: 70-2400 rpm Standard equipment: Main switch with lockable motor protection switch Mushroom push button (latching) for emergency stop Infinitely variable speed adjustment Digital speed display Feed overload protection Protection class: IP 54 Spindle protection with electrical protection Available options: – 12. Machine light – 20.1 Thread cutting device – 24. Coolant system in the base – 37.1 Digital drilling depth indicator – 50.6 Drilling depth fine adjustment 0.1 mm – Combination table – Original documentation

Condition: as good as new (ex-display), Year of construction: 2025, Functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Csln Iowbqdpjdlujrb Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Csln Ijwbqclodluorb Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Colnswbqb Is Idlusrb Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: new, Functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Crsln Idewbqbzelusb Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, Alzmetall Alzstar 40/S pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/S Condition: new Drilling capacity steel E335 (St 60) 40 mm Short spindle MK 3 Spindle stroke 120 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 117/701 mm Feed manual Machine height without options approx. 1840 mm Crsln Iswbqbnsdlueb Net weight approx. 270 kg Spindle speed rpm 160-2250

Condition: new, Year of construction: 2023, Alzmetall Alztronic i16 table drilling machine 5" touch display Condition: new Call us and ask us about special discounts or send us your request by email with your contact information and we will get back to you. 5" or 7" display with scratch-resistant glass surface - Optimal readability for the operator - Simple and uniform operator guidance using pictograms - Manual input of spindle speed - target value - Speed display - actual value - Integrated drilling depth display with touch zero point transfer (drilling start) - Virtual drilling depth scale in the display - Machine status displays and warnings in the display (safety)• Main switch, lockable - Right and left rotation through contactor control - Control voltage 24 V - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Spindle braking function - ALZTRONIC only (safety) - Adjustable display timeout Standard Equipment: -AC motor 230 V, 50 Hz -Infinitely variable speed adjustment -Reversing switch for right-left rotation -Spindle protection with electrical protection -On/off button with lockable emergency stop flap -Connection plug, cable length 3m -Paint: structural paint light gray RAL 7035, anthracite RAL 7016, white aluminum RAL 9006 Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thread 190 mm Column diameter 65 mm Manual feed Drill head height adjustment by handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Crelewbqbben Idlusb Optional: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table For self-collection. Forklift available. Shipping also possible. Errors, changes and prior sale reserved. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, ALZMETALL Alztronic 16 table drilling machine Condition: new Availability: Immediately from the Offenburg warehouse Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thrust 190 mm Column diameter 65 mm Manual feed Drill head height adjustment via handwheel Net weight approx. 83 kg Coln Idlswbqa Reuorb Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional special equipment: - Digital drilling depth indicator - Machine light Optional accessories: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display Colnjwbqa Dj Idluorb - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, ALZMETALL AX 3/SV pillar drilling machine (2017) Manufacturer: Alzmetall Type: AX 3/SV pillar drilling machine Year of manufacture: 2017 Condition: used Drilling capacity 40 mm Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height 1840 mm Net weight approx. 270 kg Drive continuously variable Spindle speed rpm 160-1125 rpm Standard equipment Celn Idjwbqaqolusrb Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Digital speed display Protection class IP 54 Spindle protection with electrical fuse Special options: – Digital drilling depth display – Combination drilling table Scope of delivery: – Documentation – Drill chuck