Used All-Kor Akb S70 for sale (56,166)

Condition: used, Year of construction: 1989, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine Kallfass KC5050/400Year 1983 - Serial-No. V 6.83.1891 Mobile on mobile frame After sealing - automatic transport into tunnel De Ia Srjinla To Aajcg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2021, Technical details: traction force: 1600 N (Zuglast: 3000 kg) N Number of working hours: ca. 5 h Tare weight: 300 kg dimensions LxWxH: 1,6 x 0,7 x 1,3 m Electric tow tractor - Tractor Anwendung z.B. ziehen von Wagen, Containern etc. bis zu einer Last von 3000 kg Traction drive: Electric 2x battery type PB, nominal capacity 96 Ah Travel speed with/without rated load: Climbing ability with load up to 15% 24 V Motor type MRP9D Pneumatic tires Wheels swivel at the front Operation via drive control drawbar with 2 manual switches and control panel (EMERGENCY button) Coupling with coupling pin Ø 35x200mm Accessories: Dcs Ia Sr Aou Nwigoaog 220V high-frequency charger Operating instructions Condition: as is, hardly used as is. *

Condition: good (used), Format 500x500mm Dce Ia Sjgt Unker Aaeg

Condition: good (used), Column drilling machine Do Iaslq D Ako Sr Aajcg Make ALZMETALL Type:AB 4 SJ ( year 1970 ) with coolant device, infinitely variable speed, with 2 gears. Drill hole in steel max: 40 mm Spindle mounting :MK 4 spindle speed : 80 -720 rpm Spindle stroke max : 150 mm feeds : 0.09 / 0,16 /0,28 mm/rev Table diameter : 560 mm Machine ready for use .

Condition: ready for operation (used), Year of construction: 1972, Functionality: fully functional, Steel and metal bandsaw machine / Brand: MÖSSNER REKORD / Type: SSF 801 / Year of construction: 1972 TECHNICAL DATA: - Roller diameter: 800 mm - Outreach: 785 mm Do Ia Sevx Huger Aascg - Maximum clearance height: 720 mm - Working table: can be swiveled on two sides Swivel range: right: approx. 45°, left approx. 10° - Band saw length: min. 5.650 mm, max. 5.800 mm - Saw band width: 10/20 mm - Cutting speed range, stepless: 15 - 940 m/min in 3 cutting speed ranges: I: 15 - 79 m/min II: 67 - 305 m/min III: 207 - 940 m/min IV Rapid speed: 4.000 m/min - Drive: 11kW - Power supply unit: 500 V, 50 Hz - Machine weight: approx. 2,3 tons - Space requirement (width x height x depth): approx. 1,6 x 2,9 x 1,9 m Additions / accessories: - Hot-knife cutting: For hot-knife cutting of steel sheets of any strength and hardness up to a cutting height of approx. 25 - 30 mm, the machine has a direct high gear with a cutting speed of 3.000 or optionally 4.000 m/min. - Band filing device - Belt grinding device - Circular cutting device: The circular cutting device is attached to the guide arm directly above the clamping plate. With its help, circular saw cuts from 40 - 290 mm radius can be made. - Choice of saw bands Minimum radii that can be cut: Radius: Band width: 6 mm 3 mm 10 mm 4 mm 17 mm 6 mm 30 mm 8 mm 45 mm 10 mm 140 mm 16 mm The number of teeth on the saw band depends on the types and thicknesses of the materials to be cut. Steel: 5 - 20 mm material thickness 14 Z" over 20 mm " 8 - 10 Z" under 5 mm " 18 - 22 Z" Gray cast iron: 5 - 20 mm " 10 - 14 Z" over 20 mm " 6 - 8 Z" Brass, copper, zinc: over 5 mm " 8 - 10 Z" under 5 mm " 10 - 14 Z" Aluminum and plastics: over 5 mm " 7 - 10 Z" Soft solder: 8 - 14 Z" - Saw guides The machine has two different saw guides: * 1 x precision saw band jaw guide with replaceable, carbide-tipped, ground and lapped guide inserts for 4, 6, 8 and 10 mm saw band width. * 1 set of guide rings for 20 mm wide saw blades for working with metals and plastics at higher cutting speeds and for hot cutting. There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: good (used), Year of construction: 1990, - Universal - toolroom milling machine -second hand- - KLOPP KORRADI - UW 10 CNC - yom 1990 Dco Ieh I Dqqsa Sr Aaeg - working range X x Y x Z = 600 x 350 x 400mm - stroke of pinole: 63mm - tool tapper ISO 40 - spindle speed 40 - 4000rpm. - control: HEIDENHAIN - TNC 355

Condition: good (used), Year of construction: 2011, Bandall BA 24 / 15-50 Banding machine One of the most recognizable wrapping machines in the world, the market leader. The device works in manual or automatic mode. Production version, for high loads. The machine is mounted on an independent structure, with wheels for transport. Work on Jumbo Rolls. After inserting the material, the machine wraps it around it, squeezes it and seals it, creating an elegant-looking package. Dcs Ia Setk Ikdsr Aaog It is perfect for packing business cards, leaflets, etc. Control via the LCD panel. Manufacturer: Bandall Model: BA 24 / 15-50 Year of production: 2011 Capacity: 36 cycles/min Belt Width: 50 mm Max. product dimensions (WxH): 320x155 mm Machine Dimensions (LxWxH): 1.000x600x1.500 mm Machine Weight: 100 kg.

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Dj Isu Nu Hiea Sr Aaecg Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Condition: good (used), Format: 500x500mm Dj Ia Srjgt Upls Aascg

Year of construction: 1970, Condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev Dcs Ia Sjmp Tp Hor Aaeg table size : 600X460 mm Machine is ready for use .

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20 h, Functionality: fully functional, Price upon request. AU 160 Universal Tool Grinder with integrated Haller UFS 155 Dce Iaov I Tbxj Sr Aaog Unrivaled manual tool grinding in tool grinding shops, maintenance departments in metalworking companies, training workshops, and anywhere automation would be too much. With the AU 160, a wide range of standard and special tools can be resharpened very economically and with great precision. Area of application: Grinding of milling tools, taps, reamers, stepped tools, turning tools, and other cutting tools made of HSS or carbide.

Condition: good (used), Year of construction: 2005, Functionality: fully functional, The following offer is offered in the order: 1 piece KALLFASS angle sealer combination Model Supercompact: MC 4040/400 This machine is the ideal unit for packaging small-format products in small to medium quantities. The MC 4040 works absolutely odor-free and you can achieve up to 15 cycles per minute. Dcs Iajvv N Nuj Sr Aaeg Other attributes of the machine are: - reliable pulse welding technology with Teflon-coated separating welding wire - time relay for preselecting the optimal welding and wear technology - basic heating for the welding wires to increase the cycle performance - robust design for industrial use - needle roller for venting the packages - max. film width 500 mm, diameter max. 300 mm - tunnel passage width 400 mm, height adjustable up to max. 150 mm - tunnel hood length 700 mm - V-adjustable, 3.5 - 16.5 m/min frequency-controlled - machine dimensions: L x W x H: 1980 x 1300 x 820 - heating fan continuously adjustable - rated power / rated current up to 400 V, 6 kW / 8.6 A The machine is used and in good condition. It can be inspected and tested by prior appointment. The machine is located in the Hanover region. The price is ex works, unpacked. No warranty or guarantee.

Condition: used, Year of construction: 1989, Functionality: fully functional, Available in 3 versions: 1 Electric pallet table De Ia Ssvwkwisr Aascg -Capacity: 1000kg -Lifting height: 77cm -380v 2 Electric pallet table -Capacity: 500kg -Lifting height: 77cm -380 V 3 -Electric pallet table -Capacity 1000kg -Lifting height 77cm -230V

Condition: used, Technical details: jaw width: 160 mm weight of the machine approx.: 13,5 kg span width: 208 mm De Iovc Dv Aoa Sr Aascg *

Condition: good (used), Table size: 610 x 610 mm Finish: 780mm Dcj Ia Soixtu Ner Aaog Adjustable table!

Condition: used, bore capacity in steel (diameter) 45 mm throat 350 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 560 mm total power requirement 3,4 kW weight 950 kg dimensions 1200 x 800 x 2300 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability Dce Ia Sevuz Tvor Aaeg * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: used, first registration: 04/2007, color: other, Year of construction: 2007, Axle 1: left 12 mm right 12 mm Axle 2: left 12 mm right 12 mm Axle 3: left mm right mm We have the possibility to stack trailers! De Ia Srsv E Iire Aajcg

Condition: used, Year of construction: 1968, Technical details: bore capacity in steel (diameter): 40 mm throat: 380 mm bore stroke: 240 mm spindle taper MT: MK 5 spindle speed:: n.b. U/min feed: 01 / 0,14 / 0,2 / 0,28 / 0,4 (manuell+automatisch) mm/U Distance spindle/table max.: 200 - 800 mm Dcj Iasvpfzyo Sr Aajg table clamping surface:: 540 x 730 mm table rotating: 360 ° drill table adjustment: 600 (manuell) mm column diameter: Ø 220 mm base plate surface area: B: 510 x L: 510 mm total power requirement: 4,0 kW weight of the machine ca.: 1300 kg dimension machine xH: 1,2 x 0,95 x 2,35 m Operation via control panel and/or foot switch Mechanical thread cutting incl. vice *

Condition: good (used), Manufacturer: LIEBISCH Dj Ia Sjpbv Dper Aajcg Type: 42016001 Test chamber : 1000 liters

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 40,0 mm throat 293 mm bore stroke 120 mm Dcs Ia Sevuz Nwor Aaeg morse taper 3 MK table: 514 x 360 mm turning speeds 80 - 1.125 U/min engine output 1,0 / 1,6 kW column diameter 115 mm thread M24 ST60 thread M30 GG20 feed 0,10 + 0,20 mm/U weight 270 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Thread cutting device * for thread cutting with a stop * max. 6 threads / min (thread cutting performance depends on the spindle speed) * Thread depth adjustable via depth stop * in the TFT - LCD display (3 tools). - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Paint: DD textured paint signal white RAL 9003, PANTONE 7545c, black - Machine oil first filling: oil bottle, loose delivery including special accessories: - 25. Coolant system B.

Condition: used, Technical details: Dce Ia Sreu Idk Uj Aaeg bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. *

Condition: used, Technical details: Dj Ieu Nlcuja Sr Aascg diameter: 250 mm passage: 80 mm width: 112 mm weight of the machine approx.: 19 kg 4- jaw chuck without flange - width of the main body 80mm - with external jaws - flange intake Ø 210 x 4 mm; mounting with 3x M12x30 mm screws, pitch circle Ø 230mm *

Condition: used, Year of construction: 1999, Technical details: bore capacity in steel (diameter): 32 mm throat: 293 mm bore stroke: 120 mm bore capacity in cast iron: Ø 38 mm spindle taper MT: MK 3 spindle throat: 293 mm spindle speed:: 160 - 2250 / seples U/min feed: 0,10 - 0,20 / manuell+automatisch mm/U Distance spindle/table max.: 55 - 642 mm table clamping surface:: 300 x 300 mm drill table adjustment: ja mm column diameter: 115 mm distance spindle center to floor plate:: 1207 mm total power requirement: 1,9 kW weight of the machine ca.: 280 kg dimension machine xH: 0,7 x 1,0 x 1,9 m Column drilling machine with infinitely variable speed adjustment and automatic feed. Tapping with changeover switchEquipment: RÖHM 3 - 16 mm chuck, operation by foot switch left/right Dj Ia Sjva Hmrjr Aaocg *

Condition: used, Technical details: diameter: 250 mm passage: 80 mm width: 112 mm weight of the machine approx.: 21 kg 4-Jaw Chuck without Flange Dco Ia Sju Nlchor Aaeg - width of the main body 79mm - with internal jaws - flange intake Ø 210 x 4 mm, mounting with 3x M12x30 mm screws, pitch circle Ø 230mm *

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW weight of the machine approx.: ca. 120 kg space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available i.D. Dce Ia Srsu Nw Sns Aaeg *