Used Full-Track Ft432 for sale (19,840)

Condition: used, Year of construction: 2018, Overview The ALWID-KRONE-HV is a semi-automatic filling machine working with high vacuum. This model is suitable for filling still media into dimensionally stable containers. Many bottle shapes and sizes can be used, no format parts required. The filling level is set directly on the valve, so it remains constant regardless of the bottle volume. Vacuum level adjustable. Tech Specs: Filling points: 2 Filling valve diameter: 13 mm Suitable for filling highly viscous media Fields of application: food, beverage, pharmaceutical and chemical industry Cgs Iajl Hx Dbs Ux N Tot

Condition: used, Year of construction: 1998, Overview The bottling line is located at a German winery and is no longer in operation. It is available because the seller has purchased a larger plant. Bottled were 1l Schlegel bottles with MCA closure.  Plant in detail  Bottle cleaning  Manufacturer: SeitzEnzingerNoll Year of construction: 1988 Type: TAUCH + STELLA  Drying tunnel Manufacturer: SeitzEnzingerNoll Year of construction: 1987  Type: REGA1  Filler  Manufacturer: Sen compacta-h 12 bottle cells Few operating hours  Screw capper  Manufacturer: Adelski  Year of construction: 1998 Type: PP2001 S MCA capper Labeler Manufacturer: MAG  Year of construction: 2000  Sorting table  Transport Cgs Ijl Hx H Noa Ux N Tet

Condition: used, Year of construction: 2023, Overview  The Wild Goose Dual Lane EVO - EU 10 filling line is an automated can filling machine. The line features automatic lid placement, a CO₂ purge station and patented sealing and capping systems to reduce oxygen ingress.  Technical details  Output: 100 cans/min  Dimensions: 3317 mm length x 1041 mm width x 2769 mm height (height 2286 mm without lid tubes) Weight: approx. 635 kg Electrical power: Three-phase, 200V-240V, 18A at 208VAC, 50/60 Hz Compressed air requirement: Clean, dry compressed air at 6.2 bar and 650 l/min; requires air dryer and coalescence filter Lid placement: Automatic, with intelligent lid detection system Filling station: Automatic CO₂ flushing and filling Co Iaeu H R Nuj Ux N Tsgt

Condition: used, Year of construction: 2005, Overview This PET bottling line was used in a factory in Denmark. It was continuously used and maintained therefor the overall condition of the line is good. The line is in operating condition. Technical data Capacity: 12,800 bph at 2,0l Formats: Bottles: 0,5l 1,0l 1,5l 2,0l Cap: 28mm PCO 1881 Shrink only:6 pack for each botte format Pallet: Europallet and half pallet List of machines Blow moulder| KRONES | Contiform S8 | 2005 Preform kipper | KRONES | 2005 Preform alimentation and feeding | KRONES | 2005 Air conveyors | Krones | Airco | 2005 Rinser Filler Capper | Krones | Mecafill | 2005 Cap Alimentation | Gassner | 2005 Cap- Fill level inspection | KRONES | Checkmat 731 | 2005 Mixer | KRONES | MSF 24/2 | 2005 Flash Pasteurizer | KRONES | 2005 Labeller | KRONES | Multimodul with Contiroll station | 2005 Date coder | Inkjet | Excel 1701 | 2005 Bottle conveyors | Krones | Synco | 2005 Shrink Packer | KRONES | Variopac FS-30 | 2005 Date coder | Videojet | VJ1610 | 2009 Tray conveyors | KRONES| Multico | 2005 Handle applicator | Twinpack | MDE | 2007 Palletizer | KRONES | Pressant | 2005 Stretch Wrapper | Haloila | Octopus | 2005 Pallet labeller | Logopak | 920-II-PFRK | 2007 Pallet labeller | Logopak | VLP-210-II-F | 2008 Pallet conveyors | KRONES | Palco | 2005 Cs Ia Uxsuzphfj N Tsgt

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details Output 800 bph (at 0.33l) 750 bph (at 0.5l) 600 bph (with 1.0l) 400 bph (for 2.0l) 240 bph (with 5.0l party KEG) Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) Long tube filler with 6 filling points Fully automated filling process Single or double CO2 flushing Siemens S7 control system with touch panel Operating hours: 725 hours Cgo Ia Ueu I Hr Uox N Tst

Condition: used, Year of construction: 2003, Overview This 5 Gallon Water Bottling filler was built in 2003 with proven technology by American manufacturer Steelhead. The machine is already dismantled, in storage and can be viewed in person. Techn. Details Capacity: 600 bph Cgj Ietw Ip Toa Ux N Tjt

Condition: used, Year of construction: 2021, Overview  This isobarometric filler was built in 2021 by the German manufacturer Markl. It can fill cans abd glass bottles. Together with this filler it comes a can seamer brand Lubeca and also manufactured in Germany. This filler is available because the seller is selling the complete equipment. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 8,000 bottles / hour (depending on format) Formats: bottle 330 ml, 750 ml, can 330 ml, 440 ml Counter-pressure filler Running direction: left - right Can seamer Lubeca LW504 (2022) included Ce Iot Rmhmja Ux N Tsgt

Condition: used, Year of construction: 2007, Overview  The Filling Line is located at a Spanish dairy and has so far filled dairy products into 1.0l and 1.5l containers made of PE-HD. The Filler has a capacity of 10,800 bph. The line is still installed and can be visited.  Machines overview  Bottle unscrambler Erecting of bottles before feeding into filler Manufacturer: LANFRANCHI Model: L2SR 14-1  Year of manufacture: 2008 Empty bottle turner Cleaning before filling by means of food grade air  Manufacturer: SIPAC Model: SPC281 Year of manufacture: 2008 Filling machine  Separation of the bottles, Filling of the bottles, Sealing of the bottle by heat, Ejection of bottles with wrong filling weight Manufacturer: SERAC Model: R36T36/1620 Year of construction: 2007 Aluminum cap punch  Punching of aluminum caps from metal tape rolls Manufacturer: Fords  Model: 320 MD Press  Year of manufacture: 2007 Leak tester  Testing the sealing tightness of the caps Manufacturer: WILCO R18 BS/V Model: Wilcomat Year of manufacture: 2009 Continuous sterilizer Sterilization by thermal treatment  Manufacturer: ACB Hydrolock Model: ACB S-350 Year of manufacture: 2014 Preheater/Cooler Heating or cooling of bottles by means of water cascades (4 heat exchangers to heat or cool the water)  Manufacturer: EZMA Model: - Year of manufacture: 2017  Capper Capping of bottles (with transport lift for caps)    Manufacturer: GYM Model: RA-6C Year of manufacture: 1994                    Labeler Hot gluing of pre-cut labels on the bottle Manufacturer: KRONES Model: Canmatic Year of construction: 1999 Shrink packer Grouping and shrinking of foil to protect the bottles  Manufacturer: OCME Model: VEGA S 50V Year of manufacture: 2001  Palletizer Grouping and stacking of bottles on pallet  Manufacturer: STORK  Model: SPE - 200 Year of manufacture: 2001 Pallet winder Wrapping of the pallet with foil  Manufacturer: OCTOPUS Model: 1600 BF Year of manufacture: 2001 Cgj Ia Uol Hx Hlox N Tot

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Cgs Ia Uxsl Hx Rpe N Tjt

Condition: used, Year of construction: 2008, Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Machine pitch 377 mm Diameter 360 mm Number of capping heads 3 Including feeder for the capping heads Cj Ia Ux Njmrpv Ds Tsgt

Condition: used, Year of construction: 2007, Overview The filler was built in 2007 by the German company Krones. The machine has been regularly serviced, is still assembled and can be inspected at any time. Technical details Output: 40,000 bph (200 ml) Formats: 200 ml glass bottle 237 ml glass bottle Closure: crown cap Direction of flow: clockwise Inlet/outlet height: 1,150 mm +- 50 mm Filling points: 96 Capping points: 15 Pitch circle diameter: 2,880 mm Pitch: 94 mm Control system: Siemens S7 Energy consumption: 15.17 kW Co Ia Uoqqz T Hsx N Tjgt

Condition: used, Year of construction: 2004, Overview The filler was manufactured in 2004. It was used in a brewery in France during the last years. The complete brewery was sold to a company in Belgium. The filler is not needed anymore and therefore for sale. It can be used for filling beer and soft drinks. The machine is disassembled and properly stored. Tech Specs: Capacity: 2500 b/h at a Volume of 0,75 l/b 3300 b/h at a Volume of 0,33 l/b 20 rinsing nozzles 20 filling valves 3 capping elements Formats: 0,33l; 0,75l Working direction: clockwise Cgs Ia Uxel Hxl Is N Tst

Condition: used, Year of construction: 2019, Overview The fill level inspection was built in 2019 by the German manufacturer Krones. The machine is currently not installed. Techn. details: Capacity: 50,000 bph Inspection via gamma ray emitter Krones Checkmat with push-off belt Cge Iajl Hxnij Ux N Tot

Condition: used, Year of construction: 2016, Overview  The atmospheric filler was manufactured in 2016 by the Italian manufacturer GAI and used in a Belgian brewery. Technical details  Capacity: 6,000 bottles/h Formats 330 ml Number of valves: 16 Cgo Ia Ux Neuhthys Tot

Condition: used, Year of construction: 2016, Overview  The MICROMAT M 1/1-F KeyKeg filling machine is a fully equipped solution designed to streamline and automate the filling process for 50-60 KeyKegs per hour. This machine comes with everything necessary for high-efficiency operations, including a complete CIP (Cleaning in Place) system, ensuring that the cleaning process is integrated and automated, maintaining optimal hygiene without the need for disassembly. Technical Data  Capacity: 50-60 KeyKegs per hour Dimensions:Depth: 1,300 mm Width: 800 mm Height: 2,200 mm ± 50 Working station height: 600 mm ± 50 Connections:Product: DN 25 Media: DN 25 Control air: Socket ¾" Electrical connections:Voltage: 230/400 V, 50 Hz / 480 V, 60 Hz Connection power: 1 kW (without tank pumps) Noise level: Below 85 dB A Key Features  Fully integrated CIP system: This allows for internal cleaning of the filling head and pipelines without manual intervention, ensuring hygiene and reducing downtime. Control system: Siemens S7 with a user-friendly interface. Robust construction: Stainless steel base frame and critical components. This machine is ready to use, offering all the equipment needed for fast and efficient KEG filling operations​ Co Ia Usu Hbk Aox N Togt

Condition: used, Year of construction: 2018, Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  Output: 4,000 bottles/hour (for 0.33-liter bottles) Type of closure: 26 mm crown cork Formats: 0.33L Filling stations: 18 Electrical specifications: Max. Voltage: 208-240 V Total current draw: 38.5 A Maximum motor current: 10.6 A Phase: 3-phase Frequency: 60 Hz Ce Ia Uxovpi Abs N Togt

Condition: used, Year of construction: 2022, Overview  The glass bottle filling line was manufactured in 2022 and in use in a brewery in Spain. As the owner is now shifting his production to a contract bottler due to increased volume, this line is for sale. Plant in detail  Robot depalletizer | Kuka (Nownology) | KUKA KR 470 PA | 2022  Capacity: 15,000 bph Weight: 470 kg  Isobarometric Filler | Nagema | 40/10 | 1990 Completely overhauled/modernised and also equipped with a new control system in 2022 Unused since overhauling  Capacity: 9000 bph on 330 ml Number of filling valves: 40 Number of capping elements: 10 Formats: 330 ml and 500 ml Products: beer and CSD Control: Siemens S7 with touch panel Fill level inspection | Heuft | --- | 2022 2x Labeller | ENOS | S5000 | 2022 for self adhesive labels Capacity: 5,000 bph Self-adhesive labels  Number of labelling stations: 3 Length: 2.850mm Width: 1.500mm Height: 2.000mm Weight: 450Kg Electr. connected load: 2 kW Wrap around packer | SMI | WP300 | ---  Modernized in 2022 (unused since then) Robot palletizer | Kuka (Nownology) | KR240PA | 2022  Capacity: 15,000 bph Weight: 240 kg 4 - 14 kg boxes Scope of delivery Conveyors  Cs Ia Ux Njmk I Dps Tsgt

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Cgs Iemnkhfoa Ux N Tjt

Condition: used, Year of construction: 2019, Overview  This canning machine “100FBEV” from British manufacturer, Innovus, was built in 2019. It has been well maintained with regular servicing and is in great condition.  Tech. Details  Capacity: 2000 cans per hour Number of filling heads: 6  Can formats:  330ml 440ml Can end spec: 200 + 202 Dimensions (Floor): 2500mm x 1300mm Machine weight: 600kg Added bonus of UK engineering support (cost at buyer expense)   Cj Ior A S E Aoa Ux N Togt

Condition: used, Year of construction: 2020, Overview    The Meheen M6 isobarometric filler from the American manufacturer Wild Goose was built in 2020. The machine was used very little.  Technical Details  Capacity: Up to 2.160 bottles per hour   Number of filling heads: 6   Last used formats: 0,33l Longneck   Possible bottle diameter: 5.3 cm - 7.6 cm  Dimensions (Floor): 1680 mm x 1070mm  Cgj Ia Uxor Hx Die N Tjt

Condition: used, Year of construction: 2013, Overview  This isobarometric filler was built in 2013 by the Slovenian manufacturer VIPOLL. This filler is available because it has been replaced by a larger machine. It has only a few operating hours and can be viewed in person at any time.   Technical Details  Capacity: 3,000 bottles / hour (according to manufacturer)  Formats: Currently set up for 330 ml longneck bottle  Counter-pressure filler with double pre-evacuation  Total operating hours: less than 1,000 hours  Running direction: right - left  Filling valves mechanical electropneumatic  Mechanical height adjustment  With color touch screen monitor  Dismantling and transfer took place in December 2023/January 2024  Optional (not included in the price): Bottle conveyor belts incl. loading and unloading table  Co Ia Ustm Hv Tjx N Tjgt

Condition: used, Year of construction: 2021, Overview The Wild Goose 4-row, glass bottle filling line was used 6 months only in a company in Finland. The line is equipped with rotary table to infeed and outfeed, rinsing machine for bottles, conveyor roller table, automatic bottle feeder for the bottles filling machine and the labeling machine. Producs: Full range of still and sparkling beverages including beer, seltzer, wine, ready-to-drink cocktails, cider, coffee, tea, kombucha, soda, cannabis drinks and more Components Machine type: Meheen M4 filling and capping machine Manufacturer: Wild Goose Year of manufacture: 2021 Machine type: labeling machine for self-adhesive label with ink jet for bottles (244) Manufacturer: Koneikko Year of manufacture: 2021 Technical Specifications Output: max. 1440 bph Lenght line: approx. 10 m, if the line is as a so-called single line bottle diameter: 5.3cm - 11.4 cm Single-phase 230V-AC, 50/60 Hz Cgs Ia Uotrh N Tox N Tjt

Condition: used, Year of construction: 2012, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling still water. The line has been regularly serviced and is in very good condition. All machines are from 2012 and have only about 20,000 operating hours. Output: 4,200 bph on 5,0l Formats: 2.5l and 5,0l Closure: 38mm plastic screw cap Label: hot glue List of machines Blow moulder | Sidel | SBO 3 Compact | 2012  Preform kipper || 2012  Preform hopper and feeder || 2012  Air conveyors | NTS || 2012  Rinser Filler Capper | Gallardo | 12-18-4 | 2012  Handle applicator | And & Or || 2012  Labeller | Makro | MHK23P UHM1L1 CE | 2012  Line distributor | Emebe || 2012  Shrink packer | KHS | Innopack Kisters SP | 2012  Handle applicator | Project AE | Progrip 550 | 2012  Cgj Iastr R Tks Ux N Tot

Condition: used, Year of construction: 2016, Overview This complete filling line for glass bottles is part of a brewery and used for filling beer in 330 ml glass bottles with crown caps. It consists of an automatic glass depalletizer, self-adhesive labeller, filling triblock and a carton packer. The entire equipment was installed in 2017 by Italian manufacturer Framax. All the equipment is still installed and can be viewed in person during production. Technical details  Production capacity: 2,400 bph (at 0,33l) Formats recently used: 0,33l Bottle diameter: 60mm, height is adjustable 26mm crown cap Packaging: 6x4 carton box Scope of delivery Automatic depalletizer | Framax | DEPAL SS-3000 | 2017 Automatic sheet removal Photocells for depalletizer Selfadhesive labeller | Framax | RLA-H06-S3-L3-D480 | 2016 3 stations for 3 labels (front, back, neck) Date/ batch printer Isobaric filler | Framax | Modulblock RFCI-16/16/1-DPS/C | 2016 Nominal capacity: 3.000 bph 16 Rinsing positions 16 Filling positions Single head capping unit for crown caps with cap feeding unit Double air pre-evacuation with CO2 Water spray device before capping, for reducing the amount of residual oxygen Automatic carton packer | Framax | CP-0700-1T | 2017 Box erecting and inserting machine With taping machine Accessories such as conveyors, cooling, pumps Cgj Istt Um Roa Ux N Tot

Condition: used, Year of construction: 2016, Overview  This labeller and atmospheric filler with capper were both manufactured in 2016. The filler is from Italian manufacturer Alfatek and the labeller is from Spanish manufacturer ENOS. The machines are for sale because the owner has switched his production to KEGs and therefore no longer needs it. The machines are installed and operative in the owner's factory, as shown in the photos. It can be visited and tested in person. Technical details  Filler & Capper | Alfatek | MBC 7/1 LP | 2016 Capacity: 1,000 bph with 0,75l 7-valve filling at 1 bar Filling with inert gas (such as CO2 or N2) to eliminate oxygen Crown capper with single-head adapters for 26 mm and 29 mm Certified as atmospheric Formats used: 0.33l, 0.5l, and 0.75 liters Dimensions of the filling machine: 180cm long 120cm wide 220cm high Labeller | Enos | Compatta | 2016 Capacity: 1,800 bph with shrinking head 1,200 bph with rolling head Automatic lot and expiry date printer by ZANASSI 3 label stations (Front, Back, Neck) Dimensions of the labeling machine: 200cm long 130cm wide 180cm high Cgj Ia Uxetzg Ihe N Tjt