Used Nilfisk-Alto Neptune 1-22 for sale (55,651)

Condition: used, mileage: 120,222 km, power: 92 kW (125.09 HP), overall weight: 8,600 kg, axle configuration: 2 axles, gearing type: mechanical, first registration: 08/1990, Equipment: crane, Very well maintained Unimog U1200 from a first owner, an Atlas 75.2 A4 (2005) crane with 4x hydraulic extensions, a maximum working height of 14 meters and a 5th and 6th control circuit (e.g. for grabs, shovels) plus a radio remote control. Atlas 75.2 A4 4x hydraulic extensions Working height 14 m Side extension 1.90 m - 3,600 kg 4.06 m - 1,650 kg 5.76 m - 1,080 kg 7.46 m - 780 kg 9.21 m - 600 kg 10.96 m - 500 kg Additional control circuit on the crane for e.g. rotary servo, gripper 4x support Floor control Radio remote control All-wheel drive with differential locks Trailer coupling Reversing gear 8 F + 8 R gears Air driver's seat Engine OM 366A 6 cylinder turbo 92 KW Registration as a self-propelled work machine possible Odometer reading 120,222 km Hour counter 10,504 BS The vehicle is from 1st hand Financing through our partner banks is possible, we are happy to help you. Fgjlinievtk Sloxpjb We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information on accessories is without guarantee. Subject to changes, prior sale or errors. We offer and strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: used, Year of construction: 2011, workpiece diameter 320 mm threading length 570 mm thread pitch 315 mm total power requirement 17 kW weight of the machine ca. 12 t dimensions of the machine ca. m Fgolinet Hxbdoixpsb

Condition: used, Technical details: diameter: 200 mm Weight: 4 kg Fjlinixevb Amqjpjgb

Condition: good (used), axle configuration: 3 axles, first registration: 11/2004, suspension: air, tire size: 245 70 17,5, Year of construction: 2004, Suspension: air suspension Rear axle 1: tire size: 245 70 17.5; double tires; tire profile left inside: 80%; tire profile left outside: 80%; tire profile right inside: 80%; tire profile right outside: 80% Rear axle 2: tire size: 245 70 17.5; double tires; tire profile left inside: 80%; tire profile left outside: 80%; tire profile right inside: 80%; tire profile right outside: 80% Rear axle 3: tire size: 245 70 17.5; double tires; tire profile left inside: 80%; tire profile left outside: 80%; tire profile right inside: 80%; Tire profile right outside: 80% Felinievn Eizexpogb Empty weight: 10,890 kg Technical condition: good Visual condition: good Contact Maarten Busser or Niels Busser for more information.

Condition: new, Functionality: fully functional, Ferwood Code: R22000688 - Manufacturer Code: 4-070-01-1355 - Condition: New - Functionality: Fully Functional - Compatible Machine: WEEKE AUTOMATIC DRILL - Weight: 1KG - Dimensions: 20X20X20 - If interested we offer overhaul service, please contact us. Felinisu H Akdexpsgb

Condition: excellent (used), working width 1300mm rotor with 4 brushes edge brush Fslsn I R Nfsinixpjgb outfeed brush variable regulated feeder variable regulated rotor speed variable regulated brushes speed elecrtic regulation of height

Condition: used, first registration: 12/2005, color: other, Year of construction: 2010, Please contact us for more information. Folinsvfdh Reixpjgb

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm Fgeliniet Hw D Rsxpjb max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, color: red, Year of construction: 1997, operating hours: 12,229 h, Field of application: Construction Empty weight: 36.000 kg Please contact Sales Department for more information Fslinisu I I R Ssxpegb

Condition: new, PM16-8J; Tr∆le® Manual Press, 1''-3SP - 1.490€ HT (+20% TVA Pour Privé) Features : Max. pressure 630 bars Felinjr Dcb Teixpjgb Weight: 25 kg Crimp diameter: 4-45 mm Crimping force: 100 tons Opening: +20 mm Opening without jaws: 59 mm Jaws included: 10,12, 14, 16, 19, 23,27, 31 , 39 (Porlemors) Capacity: 1" - 3 SP Dimensions: 330 x 400 x 280 mm Other equipment available on request. Machine sold by hydraulic professionals. Price : 1.490 € HT + delivery charges Hose, Piping, Bosch Rexroth, Parker, Eaton Vickers, Hydac, Manuli

Condition: good (used), Single-axle roller performance test bench MSR 500/1 car including cooling fan and extraction Power supply 3/N/PE 400 V 50 Hz Fuse gG 63 A Converter cabinet (W x H x D) 800 x 1000 x 400 mm Axle load 2500 kg Weight approx. 1300 kg Rotating mass per roller set approx. 280 kg Track min. 700 mm Track max. 2200 mm Roller diameter 504 mm Dimensions of roller set (L x W x H) 1095 x 3324 x 512 mm Compressed air max. 7 bar Test speed max. 300 km/h Wheel power (static) max. 260 kW (dynamic) peak > 1000 kW Traction max. 6 kN Measurement accuracy of wheel power measurement +/- 2% of the measured value Fslinjvndi Tjixpogb Roller elevation 5 mm

Year of construction: 2025, Condition: new, Functionality: fully functional, - 350 mm max. cutting height - 75-250 mm min/max Cutting width - 100 - 350 mm min/max logs - 18-80 mm side board Felohkh Npoinixpjgb - 1,8 - 6m Cutting length - 550 mm saw blade diameter - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Year of construction: 2010, Condition: used, Year of manufacture: Nov 2010 Fgjljvbg Ryeinixpeb New: No Serial number: N05H064172 Not tested. No guarantee. Please contact us if you can't find what you are looking for.

Condition: new, Year of construction: 2025, bending angle: 160 °, sheet thickness steel (max.): 1 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness copper (max.): 12 mm, working width: 1,250 mm, total length: 1,500 mm, overall weight: 100 kg, Timely delivery, trustworthy equipment ! Manual bending machine folding bench sheet metal bending machine with segments Foliniecgmf Roxpegb Prod Masz is a guarantee of reliability. Triple segmented bender SGR-1250/1.0mm Technical specifications: - maximum working width; 1250mm - Bending angle max. 160 degrees - Bending beam 15mm - max. sheet thickness (steel) 1.0mm, aluminum 1.2mm - Weight 105kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -degree scale - passage 55mm Total length: 1.6m Height: 45cm Price: 2,950 euros Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Year of construction: 1997, Condition: ready for operation (used), SICA SOCKETING MACHINE .1.T. 100-500 For KG-U PVC pipes, Felinevfyntsixpogb Pipe lengths: 0.5m, 1m, 2m, 5m, 6m Year of construction: 1997 1 socket per cycle Socket tools for: 250mm - 315mm - 400mm sewer pipe The socket machine is in good condition, ready for operation

Condition: used, Manufacturer: Ingvar Persson Pockets: 10 X 2 + 1 Log diameter: 10 - 65 cm Log length: 2,5 - 6 m Speed: Up to 60 m/min Log sorting line: - manufacturer: Ingvar Persson - pockets: 10 X 2 +1 - diameter: 10 - 65 cm Fgjlinixspungtjpob - length: 2,5 - 6 m - speed: up to 60 m/min - total length for line 85 m - double log deck 4+7 m electric drive - timber crane ( operation fro operators cabin with joystick) - step feeder hydraulic - log haul - measurement system: REMA 910 2D scanner - hydraulic kickers: 18,5 kw

Condition: excellent (used), Water chiller with refrigeration compressor Manufacturer HYFRA Type VWK 50/1 Refrigeration capacity 6.2 kW at 15 C ambient temperature Compressor capacity 2.6 kW Fjlinixjvl Ix Topjgb Weight: 190 kg

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm Fgjliegazmkjnixpsb weight of the machine ca. 1,1 t dimensions 3,0 x 1,5 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: excellent (used), Year of construction: 1970, A very well-preserved center grinding machine, make: KLEIN, type: ZSU-US/1, machine number: U4-70-091, year of manufacture: 1970. Fgjliniovrb U Uoxpeb we have transferred the machine to pallets for transport.

Condition: new, Brand new temperature control unit Heating and cooling technology company Item number: 10682 Total height 680mm Overall length 650mm Total width 350mm Operating temperature: 0 / 140 °C Fgolisut Uzyenixpob Voltage: 400V / 24VDC / 50Hz

Condition: reconditioned (used), Year of construction: 1996, operating hours: 28,135 h, Functionality: fully functional, pressing force: 60 t, total width: 1,240 mm, total length: 4,465 mm, total height: 2,750 mm, input voltage: 400 V, transport height: 2,750 mm, overall weight: 7,500 kg, year of last overhaul: 2024, filling opening width: 490 mm, filling opening length: 815 mm, How do you do? We are offering you a packaging press (can press) from the manufacturer Sandersleben Maschinen- und Anlagenbau GmbH, type SMA-2500/1, with 60 t pressing force, 31 kW connected load, built in 1996. The machine has only run for 28,135 operating hours. With a compaction capacity of approx. 790 kg/m³ (depending on the material), the press is particularly suitable for compacting used disposable packaging (cans) made of ferrous and non-ferrous metals such as aluminum as well as punching waste made of steel or aluminum sheet. The package dimensions are 600 x 300 mm, the length is variable from approx. 50 to 235 mm depending on the material. Fgslisuam R Eenixpsb The press has been overhauled. The following work was carried out: - Machine completely dismantled, cleaned, derusted, primed and repainted - Complete overhaul of the main hydraulic cylinder, new cylinder tube, new cylinder head, new gasket set. - Overhaul of the two cylinders from the counter pressure plate, gasket sets renewed - Knife set planned and ground - Residual emptying and cleaning of the hydraulic oil tank, new HPL 46 hydraulic oil filled and oil filter replaced - General maintenance work - Machine test We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,74 t dimensions 2,4 x 1,2 x 0,9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" Fgolsgazmgoinixpsb is made of high quality steel S355J2+N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17 - 19.0 mm. The holes have a diameter of 22 mm. Hole arrangement in a 100 mm grid on the table top, Side panels 150mm with parallel hole arrangement in a 50mm grid. Incl. basic foot equipment. Table height 850mm Price plus packaging and transport. Other dimensions available. The accessories shown are not included in the scope of delivery. Optionally available.

Condition: new, table length 2000 mm table width 1000 mm table height 850 mm Fjlinixegazmcjpsgb Vertikal stroke 50 mm weight of the machine ca. 0,74 t dimensions 2,0 x 1,0 x 0,9 m Product description - High quality steel S355J2+N + plasma nitriding - Material thickness approx. 17 – 19 mm - Bore Ø 22 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Height of side panel 150 mm - Hole spacing in side cheeks 50 mm - Including scaling on the surface - Construction reinforced with ribs - Grid lines enable precise setups - Special equipment for welding tables is available on request.

Condition: new, table length 1000 mm table width 1000 mm table height 850 mm Vertikal stroke 50 mm Fslinixogazl Uspogb weight of the machine ca. 0,3 t dimensions 1,0 x 1,0 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 17-19.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, Side walls 150mm with parallel hole arrangement in a 25 mm grid. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport. Other dimensions available.

Condition: new, number 57 Positionen 22 mm condition neu weight 66 kg Set 2 57 pieces, 22mm system, consisting of: Clamps: 6 x 220610.1 Clamps 4 x 220630.1 Prism 4 x 220645.1 Bolt: 18 x 220511 Folinjgazmreixpegb Magnetic bolt 4 x 220740 Stop: 6 x 220410.N Stop: 6 x 220420.N Stop: 2 x 220426.N Angle: 4 x 220110.N Angle: 2 x 220152.N Accessory set. 1 x 223999 Price plus packaging and transport.