Used Nilfisk-Alto Neptune 4-55 Fa for sale (80,373)

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 5 drillings clear width: approx. 2.700 mm Per agraffe: 5 drillings Cjdpfxjibzgxs Adusrk hole spacing: approx. 50 mm diameter holes: approx. 11 mm 01x Set screw material consisting of: 10x screws M10 10x nuts 10x washers

Condition: used, Year of construction: 1985, sheet width 2550 mm plate thickness 4 mm rear stop 1000 mm cutting angle 1,5 ° down holder 14 Stk total power requirement 6,5 kW weight 3400 kg dimensions of the machine ca. 3000 x 1500 x 2000 mm Features: - Electric rear stop 1000 mm - Electric cutting angle adjustment - 1x side stop 1250 mm - 3x front support arms - Front finger guard Credpjv Uq Snsfx Adujk - Foot switch

Condition: used, Year of construction: 2014, 1 piece panel saw, manufacturer Format 4, model Kappa 550, serial no. 604.03.086.14, year of manufacture 2014, XMotion control, aluminium sliding table approx. 3 m, swing arm, fence with digital readout, internal no. I440067 Credpexzny Sofx Adusk

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 17,320 mm, loading space width: 3,200 mm, loading space height: 400 mm, total length: 17,320 mm, total width: 3,200 mm, suspension: hydraulics, tire size: 245/70 R 17.5 | 143/131L (146/146F), color: beige, Year of construction: 2021, Colour: Yellow Loading capacity: 64,800 kg Main Features Manufacturer: Faymonville Model: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year of manufacture: 2021 Weights / Loading capacity King pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight (GVW): 84,200 kg Crodpfx Adovzaanouek Tare weight: 20,200 kg Payload capacity: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO braking system with EBS-E Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Overall length: 17,320 mm Loading platform length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Loading platform width: 2,750 mm / 3,200 mm Loading platform height: 400 mm Ground clearance: 150 mm King pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz Diesel power pack Hydraulically operated gooseneck Aluminium side boards on gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear bumper with lights King pin 3.5” Central greasing system with 2 BEKAMAX pumps = Further information = General information Year of construction: 2021 Axle configuration Tyre specification: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 1: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 2: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 3: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 4: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross permissible weight: 85,000 kg Functionality Loading platform height: 40 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request Further information Please contact Stefan Schaapveld for further details.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: R14101361 / E13Z40195 (Steuerung), overall weight: 1,270 kg, load capacity: 250 kg, arm reach: 2,655 mm, controller manufacturer: FANUC, controller model: R-30iB, input voltage: 400 V, FANUC industrial robot Robot R-2000iB 250F, Crjdpfoth Ntusx Adujk Year of construction 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Load capacity: 250 kg. Dimensions: Length 200 cm, width 110 cm, height 185 cm. Control cabinet: FANUC R-30iB. Complete with robot manipulator, connection cable, teach panel, control unit. (See type plates for further details). IPendant A05B-2255-C101#EGN We also offer accessories such as bases, spot-welding guns, rotary tables and much more. We are also happy to demonstrate the robot. Packaging and loading included.

Condition: used, Year of construction: 2012, operating hours: 12,291 h, functionality: fully functional, mileage: 54,898 km, power: 38 kW (51.67 HP), first registration: 09/2012, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, operation weight: 2,600 kg, empty load weight: 2,600 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, suspension: steel, loading space volume: 2 m³, Equipment: ABS, additional headlights, all wheel drive, hydraulics, Street Sweeper / Tool Carrier: + Nilfisk + City Ranger 3500 + First Registration: 07/09/2012 + 12,291 total operating hours; 54,898 total kilometers + 22,471 sweeping kilometers; 7,288 sweeping hours + 38 kW Perkins diesel engine + Hydrostatic drive (fast / slow), max speed: 38 km/h + Warning beacon + Auxiliary headlights + Rear-view / broom camera + Heated mirrors + Radio/CD + 2-seater Crsdpfx Asxwciyeduek + Water tank with pump + Independently swiveling brushes left/right + Front linkage + Rear hydraulics + Articulated steering + Permanent all-wheel drive + Hand throttle + 2 m³ stainless steel sweepings container, tiltable to the rear + Permissible total weight: 3,500 kg Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted; prior sale reserved!

Condition: used, functionality: fully functional, Year of construction: 1985, working width: 1,050 mm, sheet thickness steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, power: 7.5 kW (10.20 HP), overall weight: 2,300 kg, Capacity: 1050 x 4 mm. Backgauge: Motorized. 1000 mm. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Crodpoxr U Siofx Aduek Motor: 7,5 kW. Year: 1985 Country of origin: Denmark/Germany. Size (L x W x H): 1550 x 3050 x 1750 mm. Weight: 2300 kg. With squaring arm and 2 support arms. Very good condition. All our machines are tested and serviced before delivery.

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm Cedpfx Adoxrgv Teuerk plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: used, Hydr. guillotine shears SAFAN type VS 310 / 4 Machine. No. B7140 Year of construction 1984 Cutting length 3100 mm Cutting thickness 4 mm Back gauge 900 mm, accuracy +/- 0.5 mm Angle fence front left 2100 mm Hydraulic tank capacity approx. 120 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz - Motorized back gauge with positioning control and digital position display - Single stroke and continuous stroke with adjustable stroke pause - Cutting angle adjustment - Manual cutting gap adjustment - stepless cutting length adjustment - Cutting line lighting - 17 Hydraulic sheet hold-down device - Angle stop left with scale 2100 mm - 2 material support arms 1600 mm - 2 material support arms 615 mm - Electric foot switch - Fixed finger guard in front of the hold-down devices Csdpfx Adeumpq Neusrk Space requirement without sheet supports L x W x H 3850 x 2300 x 1680 mm Machine depth with sheet supports 3900 mm Weight 5.7 tons good condition

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Cedpshhc Ixefx Adusrk Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - mot. cutting angle adjustment - cutting gap adjustment by scaled adjusting screws - number of hydraulic hold-downs 14 pcs. - motorized backgauge with positioning stop 10 - 1000 mm - Stroke rate depending on cutting angle and cutting length 23 per/min - hydraulic drive 400 V / 7,5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - with: - pneum. supported sheet metal support - front angle stop + support arms - Electronic cutting depth adjustment - cutting line illumination - E-foot switch

Condition: good (used), Nilfisk BA551D Floor scrubber Crjdorrvv Uopfx Adujk Walk behind scrubber dryer, perfect for floor cleaning,

Year of construction: 2007, condition: used, Scrubbing machine, floor cleaning machine, mopping machine -Scrubbing machine with drive -Working width: 850 mm -Pract. Area performance: 2860 m2 / h Csdpjb A Hg Ejfx Adujrk -Charger -with drive -Special suction cup guarantees maximum suction power at low costs.

Condition: used, functionality: fully functional, Year of construction: 1989, working width: 1,250 mm, sheet thickness steel (max.): 4 mm, overall weight: 2,600 kg, Capacity: 1250 x 4 mm. Backgauge: Manual, 500 mm. Adjustable blade angle: Yes. Adjustable cutting length: Yes. Adjustable blade gap: Yes. Motor: 7,5 kW. Year: 1989 Country of origin: Denmark. Size (L x W x H): 1850 x 1600 x 1800 mm. Weight: 2600 kg. Cedpfx Adsxpf Hreusrk Special machine for thin plates. With new 500 mm. manual back gauge, pneumatic plate holddowns, plate seperator, adjustment of pressure on hold downs and 2 movable support arms with rulers and flipstops. All our machines are tested and serviced before delivery.

Condition: used, Year of construction: 1990, plate width 2503 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 15 - 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO TYP 85 total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2913 x 2250 x 1760 mm Features: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge Cedpfx Adsxabd Usuerk * with ELGO control unit - Manual cutting gap adjustment - Front support table including recessed grips - 1x sturdy side stop with scale and tilting cam - 2x sturdy front support arms - 1x freely movable foot switch - Front finger guard - Front emergency stop button - Operating instructions (PDF)

Condition: used, Hydraulic guillotine shears FASTI Type 509 - 25/4 Machine no. No. 5418 Year of construction 1991 Cutting length 2535 mm Crsdpet Apumofx Adujk Cutting thickness 4 mm Backgauge 5-1000 mm (controlled) Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 7.5 kW Mains connection 400 Volt, 50 Hz - Back gauge with positioning control ELGO ELECTRIC type 85 - Sheet holding device under the back gauge - Manual cutting gap adjustment with dial gauge display right and left - stepless cutting length adjustment - Hydraulic cutting angle adjustment via hand pump - front angle stop left 1300 mm - 14 sheet hold-down devices - electric foot switch - very solid and torsion-resistant welded construction - 1 set of original FASTI replacement blades (4 pieces, presumably new and unused) space requirement L x W x H 3100 x 2350 x 1700 mm weight 3500 kg good condition

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm Crodot Ucgaspfx Adujk - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: used, operating hours: 678 h, The Nilfisk BR755 is a ride-on scrubber dryer equipped with two disc brushes, designed for the efficient cleaning of medium to large surfaces. This machine combines high performance with user-friendly features, making cleaning tasks easier and more effective. User-Friendliness The BR755 features the intuitive OneTouch™ control panel, allowing all essential functions to be operated with ease. The ergonomically designed operator seat and adjustable steering wheel ensure comfort during extended cleaning sessions. Moreover, the high maneuverability allows for efficient navigation in tight spaces and around obstacles. Durability and Efficiency The integrated Ecoflex™ system offers full control over water and detergent consumption without compromising performance. This makes the BR755 both environmentally friendly and cost-efficient. In addition, the robust construction ensures a long service life and reliable operation in various environments. Other specifications: - Theoretical productivity: 4,500 m²/h Crsdpswzvc Dofx Adujk - Battery run time: 4.5 hours - Scrubbing width: 71 cm - Squeegee width: 94 cm - Clean water tank capacity: 106 liters - Recovery tank capacity: 106 liters - Number of disc brushes: 2 (Ø36 cm) - Power supply: 24V battery - Maximum speed: 6.3 km/h - Brush pressure: Adjustable between 40 and 96 kg - Traction drive: Front wheel - Sound level: 63.7 dB(A) - Weight (excl. batteries): 255 kg - Weight (incl. batteries): 415 kg - Dimensions (LxWxH): 152 x 74 x 123 cm With the Nilfisk BR755, you are investing in a powerful and versatile scrubber dryer that contributes to more efficient and thorough cleaning of your facilities.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/1991, * SAF axles Codpfowu Slnsx Aduerk * Drum brakes * 4 chambers * Own weight: 9,150 kg -----Internal vehicle number: 9535----Subject to errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2013, Water barrel: - suitable for Nilfisk City Ranger 3500 - 1000l - year of construction 2013 - Pump hydraulically driven 40bar; 91,3l/min - Hose on reel 10m - 250cm x 170cm x 195cm - Weight: 250kg Crjdpfxotulgfj Aduek - Rollable storage rack - separate control panel Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. Cjdoxaa I Sepfx Aduerk cutting angle 1.5 ° total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: used, overall weight: 575 kg, volume flow: 550 m³/h, power: 75 kW (101.97 HP), We offer for sale Grundfos pump Type TP 200-510/4 A-F-A-DBUE. The pump is used, in very good condition. Cedpfx Adswqnfvsujrk

Condition: good (used), Year of construction: 1986, machine/vehicle number: 8618030, Offer 25182 Technical Data: - Max. working width: 2040 mm - Max. material thickness: 4 mm - Roller diameter each: 140 mm - Stroke: 70 mm - Rear roller and bottom roller adjustable for conical bending - Upper and lower rollers driven by motor - Working speed right + left: 6 m/min - Drive: 380 V / 6.2 kW - Space requirement approx.: W 3560 x H 1100 x D 870 mm - Weight approx.: 1700 kg - With: - asymmetrical roller arrangement - crown-turned naturally hardened rollers - manual adjustment of rear rollers - pre-bending - pivotable top roller Codpfewq It Tox Adusrk - electric foot switch for right and left rotation

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer, hydraulic unit from guillotine shears SafanTyp VS 255-4 -Hydraulic pump: Sauer Type 4 P 023 LM 929 -Motor: rotor 5.5 kW / 1450 rpm -Hole distance: 215/140/Ø12 mm -Individual components: see photos -Dimensions: 735/350/H300 mm Crjdpfsi Dudkjx Aduok -Weight: 88 kg

Condition: good (used), axle configuration: > 3 axles, first registration: 09/2021, total length: 13,700 mm, total width: 2,550 mm, total height: 3,650 mm, suspension: air, tire size: 205/65R17,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional options and accessories = - EBS = Notes = Number of axles: 4, twin tires, unladen weight: 13,000 kg, gross weight: 57,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: full air suspension, ABS, EBS, superstructure year: 2021, lowloader type: semi lowloader, loading area length: 925 cm, gooseneck length: 365 cm, ramp length: 300 cm, axle type: BPW, 4 axles, last 2 axles steering, 2 hydraulic ramps, extendable = Further information = General information Cab: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tyres; left inner tyre tread: 11 mm; left outer tyre tread: 10 mm; right inner tyre tread: 11 mm; right outer tyre tread: 11 mm Axle 2: Twin tyres; left inner tyre tread: 6 mm; left outer tyre tread: 10 mm; right inner tyre tread: 6 mm; right outer tyre tread: 5 mm Axle 3: Twin tyres; steering; left inner tyre tread: 10 mm; left outer tyre tread: 10 mm; right inner tyre tread: 8 mm; right outer tyre tread: 8 mm Axle 4: Twin tyres; steering; left inner tyre tread: 6 mm; left outer tyre tread: 7 mm; right inner tyre tread: 9 mm; right outer tyre tread: 12 mm Weights Empty weight: 13,000 kg Codpfx Ajv Uwa Esdujrk Payload: 44,000 kg Gross vehicle weight: 57,000 kg Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damages: none = Company information = Kleyn Trucks is one of the world's largest independent traders of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our inventory includes all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognisable quality • Good price • Proper business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged promptly • Expert technical services • The reassurance of "recognisable quality" • And more.... Please visit our website for special offers and the full inventory: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send us an enquiry via our website. Ask us directly about our European warranty package.

Condition: good (used), The scope of delivery includes: 01x stacking container, used Credpsnabqlefx Aduek Manufacturer: SSI Schäfer Material color: hot-dip galvanized Total width: approx. 850 mm (outside- outside) frame width: approx. 800 mm Usable width: approx. 770 mm Total height: approx. 670 mm (floor - OK crane eye) Frame height: approx. 605 mm Useful height: approx. 470 mm Underride height: approx. 105 mm Total depth: approx. 550 mm (outside - outside) Frame depth: approx. 500 mm Useful depth: approx. 490 mm Further technical data of the stacking container: Weight / pcs.: approx. 37,000 kg load: maximum 0,8 t stackable: yes (stacking factor: 1+5) crane eyes: 4 pieces diameter of crane eyes: approx. 36 mm Remark: The stacking containers may be bent. Furthermore, they may have dents or other damages. other damages. Usage: The stacking containers are suitable due to your robustness especially for the workshop or transport. Due to the catch corners and reinforced feet a safe stacking is given. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.