Used Hurlimann H-656 Xa for sale (28,196)

Condition: good (used), power: 245 kW (333.11 HP), fuel type: diesel, color: yellow, Year of construction: 2015, operating hours: 5,243 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL180HEF0008019 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 38 km/h Empty weight: 29.700 kg Functional Lifting capacity: 8.710 kg Condition Technical condition: good Cgehxjwhfwwe A A Hrot Visual appearance: good Other information Front tyres / undercarriage remaining: 95 Rear tyres remaining : 95 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,98x3,96x3,58 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, mileage: 295,000 km, Year of construction: 2008, Serial number: WMA30SZZ38W12xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19323 Specifications truck: - 2008 model - About 295,000 km - Automatic transmission - Euro 4 engine - 480 Hp - Front suspension: Parabolic - Rear suspension: Air - Lift and turn on 4 axles - Tip - Fasteners in the box - Internal Width in the box: 2,416 m - Internal length in the box: 5,276 m - Tires (see pictures) - Plow surface plate - Extra hydraulics at the front - Plow rigged w/ joystick - Climate/ac - Radio - Diesel heater - Light - Service history - Ready for delivery Specifications 2620 HMF crane: - 2013 model - 26 T/M crane - 6 hydraulic extensions - 2 Outriggers - Scheme for grab - Grab is not included - Remote control - Ready for delivery Description: only one owner since new !! Cshsvg At Ujx A A Hrjgt The truck is fully equipped with a joystick inside. Plow plate included. (but not pictured) The crane has a reach of 17 meters and is set up for grab. Errors and omissions may occur. Ready for delivery. Km: 295000 HK: 480 Technical approved: Yes EU-approved until: 08.07.2025 Own weight: 17670 Total Weight: 35000 Payload: 17255 Width: 255 Length: 899 Euro: 4 Gearbox: Automatic

Condition: good (used), Smoke extraction hood with burner, gas furnace, laboratory furnace, kiln -Smoke extraction hood: with burner, without extraction fan -Interior: W/D/H 690/400/580 mm Cgehx A A Hjwhbgzorst -Accessories: see photos -Dimensions: 730/425/H1015 mm -Weight: 71 kg

Condition: good (used), mileage: 234,639 km, power: 220 kW (299.12 HP), first registration: 08/2019, fuel type: diesel, color: silver, axle configuration: 4x2, tire size: 285/70R19,5, fuel: diesel, wheelbase: 5,400 mm, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,490 mm, loading space length: 7,290 mm, loading space height: 2,620 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, trailer coupling, = More options and accessories = - Digital tachograph - Tachograph (control unit) - Short cabin - Tail lift = Remarks = Number of axles: 2, Configuration: 4x2, Own weight: 7140 kg, Gross weight: 15000 kg, Total tank capacity: 125 litres, Trailer coupling, Kingpin diameter: 40 DIN, Number of locks: 1, Suspension type: Air suspension, Cabin type: Short cabin, Cruise control, Tachograph (control unit), Digital tachograph, Air conditioning, Color: Silver, Metallic, Engine manufacturer: Mercedes, Engine power: 220 kW (295 Hp), Euro: 6, Gearbox type: Telligent, Gears: 6, Power steering, ABS, ASR, Tail lift, Tail lift design: Tailgate, Tail lift load capacity: 1500 kg, Tail lift manufacturer: B.A.R cargo lift, tail lift material: aluminum, tail lift size: 181 x 252, AIRBAG / ACTIVE BRAKE ASSIST / DIFF. SPER / TAILLIFT / HIGH PERFORMANCE ENGINE BRAKE / AHK = More information = Drivetrain Engine brand: MB Gearbox Gearbox: 6 gears, automatic Axle configuration Tire size: 285/70R19.5 Brakes: disc brakes Axle 1: steered; tire profile left: 9 mm; tire profile right: 10 mm; suspension: leaf spring Axle 2: twin tires; tire profile left inside: 12 mm; tire profile left outside: 12 mm; tire profile right inside: 11 mm; tire profile right outside: 11 mm; Suspension: air suspension Dimensions Cshx A A Hevck Irorogt Dimensions (L x W x H): 948 x 255 x 380 cm Weights Empty weight: 7,140 kg Payload: 7,860 kg GVW: 15,000 kg Functional Tail lift: B.A.R cargo lift, tailgate, 1500 kg Height of loading area: 114 cm Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2023, Item: A-10196-SS-horizontaltank-50m3 Capacity 50.000 L Exterior dimensions: L 8817 mm H 3200 mm Ø 2800 mm. Horisontal stainless steel tank Cgshx A Aeq Daf Ej Hrjt AISI 304. Newer used - NEW!

Condition: used, Year of construction: 1997, operating hours: 30,251 h, lifting height: 4,440 mm, fuel type: diesel, mast type: duplex, fork length: 1,170 mm, total height: 3,000 mm, total length: 3,100 mm, total width: 1,500 mm, color: other, Empty weight: 7.150 kg Lifting capacity: 4.500 kg Fork dimensions: 1.170 x 1.100 mm Cgshx A A Hswg Ai Isrot - Lifting capacity: 4500kg - Lifting height: 4440mm - Maximum fork width: 1100mm - Number of wheels: 4 Wheels - Overhead clearance: 3000mm - Attachment: Side-shift, 4th valve to fork carriage - Options: License Plate, Verwarming, Full cabin, Air tires, Work lights - Fork length: 1170mm - Free lift: 0mm - Mast: Duplex - Year: 1997 - Documentation available: No - CE mark available: Yes - Serial number: 352H02000345 - Operating hours: 30251 - Drive: Diesel - Transport dimensions: 3100mm x 1500mm x 3000mm (l x w x h) - Transport weight [kg]: 7150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Cehxowhf Hfe A A Hrjgt Weight: 43 kg Good condition

Condition: good (used), power: 309 kW (420.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 12,452 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL260HL00001089 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 39.000 kg Condition Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Cgehxswgnzvo A A Hrjt Rear tyres remaining : 70 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,47x2,4x3,72 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: good (used), Year of construction: 2012, Ref. -No.: 10537 Manufacturer: HELLER Type: H 4000 Year of construction: 2012 Type of control: CNC Control: FANUC 31i Storage location: Halberstadt Cshx A Ajwhdzbe Hrogt Country of origin: Germany X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 1.400 kg Max. Tool Length: 410 mm Max. Tool Diameter: 188 mm Max. Size Of Workpiece Lxwxh: 900 x 1000 mm Tool Taper: HSK 63A Tool Piece Magazine With: 489 Pcs./pcs. Spindle Speed: 16.000 RPM Max. Torque: 180 Nm Rapid Travel X/Y/Z: 90.000 mm / min pallet change time: 200 s Further information: These are 2x HELLER 4000 incl. FASTEMS SYSTEMS with 32 pallets. Machines are currently in production and can be viewed by appointment.

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, first registration: 08/2019, next inspection (TÜV): 01/2026, Year of construction: 2019, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, H&W (Vreden) AGRAR- Walkingfloor 70 cbm in full equipment First registered 08/ 2019, from 1st hand Dimensions i.L. (LxWxH) 12,000 x 2,480 x 2,323/ 2,566 mm (conical design) Fifth wheel height 1,250 to 1,300 mm Total height 3,950 mm SAF axles "Off-Road" with large disc brakes 430 mm WABCO trailer EBS with RSS stability program Chassis fine-grain steel, hot-dip galvanized Forced steering 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points set on the outside Tires 445/65 R 22.5 (also available with field tires/low-pressure tires) Cjhx A A Hjwhd Eyoregt Cargo floor AGRAR with 15-board system, reinforced version 10 mm RADIO remote control floor and rear wall flap Profile joints of the side walls completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic connections on the front wall and also on the support legs HYDRAULIC REAR WALL FLAP, controlled via the radio remote control PNEUMATIC PARTITION POSITIONER RENTING is the new BUYING, ALSO immediately available from us in full-service rental-----

Condition: good (used), Year of construction: 2006, Functionality: fully functional, controller manufacturer: SIEMENS, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: SIEMENS 840D Solution Line HV milling head can be used in horizontal and vertical positions X-axis: 1,350 mm Y-axis: 770 mm Z-axis: 1,330 mm NC rotary table: B-axis input and display resolution: 0.001° Cehx Aewg Duxo A Hrjgt Clamping area: 800 x 800 mm Max. load: 2,000 kg Interference diameter: 1,600 mm Work spindle: Speed range: 20...6,000 rpm Tool holder: HSK 100 Drive power at 60% duty cycle: 30 kW Torque at 60% duty cycle: 1,080 Nm Automatic tool changer stations: 240 Coolant system with fleece gravity filter and 80 bar pressure output RENISHAW measuring probe OMP60 Oil and emulsion mist extraction KNOLL chip conveyor Tool breakage detection

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth Cgohsg Akgtex A A Hrot tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Forkardt F315 J8 H lathe chuck - outer diameter 320mm,used, good condition, 100% working, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Cgjhx A A Houlqhmeret

Condition: used, Year of construction: 2017, Carrying capacity: 500 kg Number of suction pads: 8 With chain hoist: Yes Mounting flexible: Yes For panels: Yes Horizontal panel transport: Yes Conformity marking: CE mark Cgohjv Ei Shjx A A Hret

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Cohowf Dddex A A Hregt very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 2014, operating hours: 2,638 h, 2014 | Haulotte | Haulotte H 25 TPX (25.3 meters) | Used Telescopic Boom Lift | 2638 hours 📍Location: France, Illange 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 19200 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert Cgshxewf Aqce A A Hrjt 41 inspection points 34 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine needs maintenance ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "36687 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Condition: ready for operation (used), Year of construction: 1998, General Data Machine weight 20500 kg Main Drive Spindle motor power 400 V, 50 Hz Cgjhxswgf Erj A A Hrot This 4-axis HELLER MCS-H 250 was manufactured in 1998. A robust horizontal machining centre, it offers reliable performance for diverse machining needs. Consider the opportunity to buy this HELLER MCS-H 250 horizontal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2016, operating hours: 11,339 h, lifting height: 3,700 mm, fuel type: gas, mast type: duplex, fork length: 1,200 mm, total height: 2,600 mm, total length: 2,900 mm, total width: 1,250 mm, color: other, Empty weight: 5.020 kg Lifting capacity: 3.500 kg Fork dimensions: 1.200 x 1.150 mm - Lifting capacity: 3500kg - Lifting height: 3700mm - Maximum fork width: 1150mm - Number of wheels: 4 Wheels - Overhead clearance: 2600mm - Attachment: Fork positioner, Side-shift - Options: Work lights, Verwarming, Full cabin - Fork length: 1200mm - Free lift: 0mm - Mast: Duplex - Year: 2016 - Documentation available: No - CE mark available: Yes - Serial number: H2X393G03206 - Operating hours: 11339 - Drive: LPG Cgjhxowfpqve A A Hrot - Transport dimensions: 2900mm x 1250mm x 2600mm (l x w x h) - Transport weight [kg]: 5020kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Working dimension Z: 250 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool changer positions: 28 Linear tool changer: Yes Disc tool changer 18-fold: Yes Pickup change place: Yes Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Chip deflector: Yes Control: PC control Cgjhx A Aev Ezk Nj Hrst Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Cgjhx Ajwf A U Ue A Hrst very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm with electrical cabinet AVAILABLE AND READY TO WORK

Condition: ready for operation (used), Year of construction: 1997, operating hours: 63,800 h, General Data Cgjhxewgf Dze A A Hrot Machine weight 20500 kg Additional Equipment Rotary Indexing Table: Part Accuracy: ±3 arc seconds / Max. Clamping Weight: 800 daN (center) / Max. Tangential Torque: 20000 Nm (locked) / Max. Tilting Torque: 18000 Nm (locked) Rotary Indexing Table: Part Accuracy: ±3 arc seconds / Max. Clamping Weight: 800 daN (center) / Max. Tangential Torque: 20000 Nm (locked) / Max. Tilting Torque: 18000 Nm (locked) Main Spindle: Speed Range: 45-6000 rpm (infinitely variable) / Drive Power: 36 kW (from 500 rpm, 40 % ED) / Max. Torque: 688 Nm (40 % ED) / Feed Speed: Up to 24000 mm/min / Feed Forces: X/Y-axis 15000 N, Z-axis 20000 N This 4-axis HELLER MCS-H 250 was manufactured in 1997. A robust horizontal machining centre, it offers reliable performance for diverse machining needs. Ideal for those seeking advanced machining capabilities. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2013, operating hours: 12,399 h, lifting height: 4,670 mm, fuel type: gas, mast type: duplex, fork length: 1,150 mm, total height: 2,900 mm, total length: 2,000 mm, total width: 1,100 mm, color: other, Empty weight: 3.355 kg Lifting capacity: 2.000 kg Fork dimensions: 1.150 x 0 mm - Lifting capacity: 2000kg - Lifting height: 4670mm - Maximum fork width: 0mm - Number of wheels: 4 Wheels - Overhead clearance: 2900mm - Attachment: Side-shift - Options: Work lights, Camera - Fork length: 1150mm - Free lift: 0mm - Mast: Duplex - Year: 2013 - Documentation available: No - Operating hours: 12399 - Drive: LPG - Transport dimensions: 2000mm x 1100mm x 2900mm (l x w x h) - Transport weight [kg]: 3355kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Cjhx A A Hswfpmdjrsgt Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2022, Working dimension X: 3.300 mm Working dimension Y: 1.250 mm Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 12 Vertical drilling spindles: 18 Cgshx A A Hewg Smvsret Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in Y-direction, in X-direction Gantry machine: einseitig angetrieben Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Pendulum machining: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Handheld terminal: Yes Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 CREATE, PC office licence Conformity marking: CE mark, UKCA-Zeichen Total connection: 18 kW

Condition: ready for operation (used), Year of construction: 2000, operating hours: 65,550 h, General Data Machine weight 20500 kg Additional Equipment Pallet Changer: Pallet Size: 500 x 630 mm (DIN 55201-A1) / Fastening: 33 x M12 screws Tool Magazine: 3 cassette slots + 1 set-up slot / Tool Holder: SK 50 / Max Tool Diameter: 100 mm (occupied) / 270 mm (with free space) / Max Tool Length: 450 mm / Max Tool Weight: 25 daN This 4-axis HELLER MCS-H 250 was manufactured in 2000. Ideal for precision machining, this horizontal machining centre offers robust construction and reliability. Consider the opportunity to buy this HELLER MCS-H 250 horizontal machining centre. Contact us for further details regarding this machine. Cohswgf D Uex A A Hrjgt Application Types Milling

Condition: used, Year of construction: 2017, operating hours: 15,418 h, lifting height: 4,350 mm, fuel type: gas, fork length: 1,000 mm, total height: 210 mm, total length: 240 mm, total width: 120 mm, color: other, Empty weight: 3.820 kg Lifting capacity: 2.000 kg Fork dimensions: 1.000 x 950 mm - Lifting capacity: 2000kg - Lifting height: 4350mm - Maximum fork width: 950mm - Number of wheels: 4 Wheels - Overhead clearance: 2750mm - Attachment: Side-shift Cjhx A Ajwfpkpe Hregt - Fork length: 1000mm - Year: 2017 - Documentation available: No - Serial number: H2.0FT - Operating hours: 15418 - Drive: LPG - Transport dimensions: 240mm x 120mm x 210mm (l x w x h) - Transport weight [kg]: 3820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom