Used Hurlimann H-362 for sale (24,373)

Condition: good (used), Year of construction: 2016, operating hours: 7,903 h, lifting height: 3,330 mm, fuel type: gas, mast type: duplex, power: 33 kW (44.87 HP), motor manufacturer: PSI, fork length: 1,200 mm, General information Field of application: Internal logistics Weights Empty weight: 2.290 kg Functional Lifting capacity: 1.600 kg Number of valves: 3 Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Dcebjv D Edws Em Tuhog Other information EPA Marked: yes Fork carriage: Sideshifter Additional information Please contact Bas Sindorf for more information

Condition: used, Year of construction: 1999, cutting diameter 300 mm Dceb Em Tuev Ehclohsg saw band length 4100 x 34 x 1,1 mm cutting width 300 mm cutting speed 10 - 130 m/min weight of the machine ca. 2,3 t dimensions of the machine ca. 2,5 x 2,0 x 1,75 m Hydraulic band saw machine with - Material feed 900mm - Emergency stop device

Year of construction: 2015, Condition: good (used), Output: 1200m3/h motor: 2.2 kW Dcjb Em Tuorlm Ebohsg

Condition: new, Year of construction: 2019, Functionality: fully functional, cooling capacity: 157.5 kW (214.14 HP), type of cooling: water, overall weight: 820 kg, total width: 1,000 mm, total length: 1,600 mm, total height: 1,950 mm, warranty duration: 6 months, heating capacity: 175 kW (237.93 HP), Watercooled chiller/Heat pump Climaveneta NX W Y H 0502 157.5 kW/175 kW Cooling capacity: 157.5 kW / 44.78 tons (12/7 — 35°C) Heating capacity: 175 kW / 49.76 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Dcjb Em Tujv Nkbxshjg Compressors: 2 pcs. Bitzer GSD80295VLB4-2 (scroll) Type of refrigerant: R454B Dimensions: 1.6x1x1.95 m Weight: 820 kg Working hours: 59/80 h. Condition: Outlet

Condition: ready for operation (used), AEG 1M 400-75 H Thyro-M Thyristor, serial no. according to photo,used, normal traces of use, 100% functional, scope of delivery according to photos Djb Em Tuei D Tufjhscg

Condition: good (used), Year of construction: 1996, CUTTING RANGE ..... MIN 10MM TO 75MM CUTTING LENGTH ..... 5-900 SINGLE STROKE -9999 REVERSE RUN CUTTING SPEED ..... 0 - 40 MM SEC. INFINITELY VARIABLE REVERSE 135MM/S MATERIAL FEED SPEED ..... MAX. 350 MM/S Dcsb Em Tuequuufjhsg TENSION FORCE ..... MAIN CLAMP 10500N

Condition: used, Year of construction: 2011, operating hours: 13,507 h, lifting height: 4,670 mm, fuel type: gas, mast type: duplex, power: 46 kW (62.54 HP), motor manufacturer: Mazda 4cil, fork length: 1,200 mm, color: other, General information Field of application: Internal logistics Weights Empty weight: 4.490 kg Dcsb Emev D Ec Hj Tuheg Functional Lifting capacity: 2.500 kg Maximum passing height: 303 cm Number of valves: 3 Condition General condition: average Technical condition: average Visual appearance: average Other information EPA Marked: yes Fork carriage: Fork spreading Additional information Please contact Bas Sindorf for more information

Condition: used, Year of construction: 1999, cutting diameter 360 mm saw band length 4420 x 34 x 1,1 mm cutting width 360 mm cutting speed 15 - 90 m/min 3,0 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2,35 x 2,3 x 1,75 m Hydraulic band saw machine with - Material feed 800mm - Motorized saw blade tension - Emergency stop device Deb Em Tov Ehcfeuhscg

Year of construction: 2019, operating hours: 3,412 h, Condition: used, Functionality: fully functional, fuel type: diesel, lifting height: 4,615 mm, free lift: 1,510 mm, mast type: triplex, construction height: 2,526 mm, fork carriage width: 1,350 mm, engine type: VW 4 Zylinder CR, drive type: Diesel, load capacity: 5,000 kg, construction width: 1,350 mm, Diesel forklift Dob Emov Eztkj Tuhscg Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Hydrostatic / 2-pedal Speed class: 20 Condition: Reconditioned without guarantee Technical condition: good Front tires type: Superelastic Front tires size: 300-15 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 250-15 NEW Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik We will be happy to enquire about leasing & financing as well as delivery at favourable conditions. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off as of the date of entry. Subject to prior sale, changes and errors. Reach fork, Attachments on request 3rd valve, 4th valve, rear work light, front work light, heating, soot filter, full cabin, full free lift, safety light, seat heating, Comfort seat seat heating, pressure switch

Condition: new, power: 55 kW (74.78 HP), gearing type: hydrostat, fuel type: diesel, color: other, lifting height: 6,000 mm, axle configuration: 4x4, Year of construction: 2024, Equipment: all wheel drive, Technical information Chassis type: rigid Drive: Wheel Make of engine: Kubota Top speed: 30 km/h Empty weight: 4.932 kg Functional Lifting capacity: 2.500 kg Other information Dob Em Tuerbgbgehecg Emission level: Stage V / Tier V Rental currency: EUR Production country: FR Additional information Please contact Jan De Lepeleer for more information

Condition: ready for operation (used), Robo Cylinder RCS-SM-A-150-H-600-X09 Actuator, slight damage to the housing see photo,, serial no. according to photo, used, strong traces of use, 100% functional, scope of delivery according to photos Dcjboi Ec Dis Em Tuhjg

Condition: good (used), axle configuration: 2 axles, first registration: 06/2008, suspension: air, tire size: 275 70 22.5, Year of construction: 2008, Equipment: tail-lift, = More options and accessories = Dob Emev Dw Sme Tuhecg - 2 floors - Diagonal corner - Large storage space - LED lighting - Air suspension - Push = More information = General information Purpose: Livestock farming Axle configuration Tyre size: 275 70 22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Double tires; Steered; Tire profile left inside: 80%; Tire profile left outside: 80%; Tire profile right inside: 80%; Tire profile right outside: 80% Rear axle: Double tires; Tire profile left inside: 80%; Tire profile left outside: 80%; Tire profile right inside: 80%; Tire profile right outside: 80% Functional Tail lift: Solid 1B6H2VOM, tailgate, 1500 kg Condition Technical condition: good Visual condition: good Financial information VAT/margin: VAT deductible More information Contact Bart Companjen, Giel Companjen, Frans Moran Santos, Bertus Companjen or kantoor, office, buro. for more information.

Condition: good (used), Year of construction: 2011, operating hours: 8,488 h, lifting height: 4,330 mm, fuel type: diesel, mast type: duplex, power: 38 kW (51.67 HP), motor manufacturer: Mazda 4cil, color: other, Field of application: Internal logistics Empty weight: 4.110 kg Lifting capacity: 2.500 kg Number of valves: 3 Djbjv D Ebpe Em Tuhjcg Technical condition: good Visual appearance: good Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: excellent (used), Lifting unit Make Römheld type H 51 R 52 3507 Lifting unit lifting force 4 kn 400 kilo Lifting path 300 mm The clamping device can be rotated 180 degrees in the horizontal axis. 4 x by 90 degrees in the vertical axis Dsb Em Tusih R Hbohscg

Year of construction: 2013, operating hours: 9,743 h, Condition: used, Functionality: fully functional, lifting height: 6,455 mm, free lift: 2,074 mm, mast type: triplex, construction height: 2,841 mm, fork length: 1,200 mm, fork carriage width: 1,150 mm, engine type: VW 4 Zylinder BEF, drive type: Treibgas, load capacity: 3,000 kg, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Double pedal Djbov Ezryo Em Tuhecg Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Front tires size: 27x10-12 Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires size: 23x9-10 Rear tires condition: 80 - 100% Description: Handed over with new FEM 4.004 test including test book If you have any further questions, please call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik Leasing & financing as well as delivery at favorable conditions. We will be happy to inquire for you. It is also possible to trade in Linde equipment - even without purchasing a device from us. The operating hours shown were read off at the time of the entry. Subject to prior sale, changes and errors. Fork clamp, side shift, fork positioner, Durwen fork clamp with separate side shift 3rd valve, 4th valve, rear work light, front work light, heating, STVZO, full cabin, full free lift, safety light,

Condition: used, mileage: 96,786 km, power: 75 kW (101.97 HP), fuel type: diesel, gearing type: mechanical, first registration: 11/1992, color: white, number of seats: 11, Equipment: ABS, air conditioning, parking heater, Ex-Federal Police authority vehicle with 11 seats, servo, ABS, 5 gears, roof air conditioning, hot water auxiliary heating with 2nd battery, front seats as swing seats from Isringhausen, sliding door on passenger side, rear door, rear step, storage compartments above, 2x roof hatch in passenger compartment, Vmax = approx. 116 km/h The body is in extremely good condition - it was completely refurbished by the authority a few years ago and then repainted from green to white, the frame and the sill plates were well preserved we have this car for sale: - new glazing in the driver's cab (windscreen, crank window and triangular window) in real glass - a fresh inspection with engine oil and brake fluid changes and greasing - maintenance of the auxiliary heating - various small parts replaced - HU/AU for delivery new with H-certificate a very nice vehicle, vehicle ready to drive with M+S tires ideal as a basis for a very robust Motorhome Interior dimensions from behind driver's seat LxWxH in mm: 4000 x 1850 x 1900 -Subject to changes, prior sale and errors- Dcob Em Tujv E T D Ijhjg *245*

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Djb Emei Eb Dro Tuhecg

Condition: used, Year of construction: 2015, Complete system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber and PVC hoses, tarpaulins, banners and other plastic materials with textile reinforcement. The system works with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Djb Eevx R N Ism Tuhscg Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. Missing top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Condition: used, Year of construction: 2014, operating hours: 2,158 h, load capacity: 8,000 kg, lifting height: 4,470 mm, free lift: 1,540 mm, mast type: triplex, power: 72 kW (97.89 HP), fork carriage width: 2,100 mm, ground clearance: 247 mm, front tire type: V:Solideal H: Orca, front tire size: 8.25-15, rear tire type: V:Solideal H: Orca, rear tire size: 300-15, total length: 6,380 mm, wheelbase: 2,600 mm, engine type: VW VW3,6l VR6, drive type: Gas, construction width: 2,250 mm, net weight: 13,270 kg, Gas forklift Linde H 80T/900/396 Djb Emevixwbs Tuhecg Drive Gas Year built 2014 Lifting height (mm) 4,470 Lifting weight (kg) 8,000

Condition: good (used), Year of construction: 2009, Functionality: unexamined, machine/vehicle number: 096106384, input voltage: 230 V, overall weight: 451 kg, frequency: 50 Hz, Edwards Helios-E Gas Abatement system in Excellent Condition! Description: system for Effective exhaust management of CVD processes for semiconductor processing. Manufacturer: Edwards Model: Helios-E Sr.no. 096106384 Manufactured 2009 Power: 1Ph, 230V, 50 Hz. Weight: 451 kg With documentation Dceb Emsv Diqne Tuhjg

Condition: excellent (used), Sell well preserved Helmerding eccentric press Very little used! Dcob Em Tjfdnw Houhog

Condition: new, Functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. Dcjboq Nfvue Em Tuhjg 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Dcjb Esi Eb Dnsm Tuhsg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 60,457 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Siemens SINUMERIK 840 D Powerline, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS X-axis: 600 mm Y-axis: 560 mm Z-axis: 560 mm Control: Siemens SINUMERIK 840 D Powerline Rapid traverse speed: 60 m/min Spindle system Speed range: 1 - 15,000 rpm Tool holder: HSK-A 63 Internal coolant supply: Form AD with vacuum rotation filter VRF 250/1250 Tool changer & magazine Tool magazine: Plate Capacity: 90 places NC rotary table & pallets NC rotary table: 360,000 x 0.001° Number of pallets: 2 Pallet size: 400 x 500 mm (similar to DIN 55201-A2) Cooling system & chip handling Cooling lubricant system: Tank capacity 500 L High pressure pump: 60 bar / 19 l/min (pressure levels adjustable via H addresses) Coolant temperature control: Yes Measuring probe: RENISHAW MP 10 MACHINE DETAILS Operating hours: 60,457 h Switch-on time: 120,080 h EQUIPMENT - Additional control panel at the loading station of the tool magazine with LCD display, 5 soft keys and numeric keypad - Drill breakage control (via laser) with basic software, if breakage is detected the machine stops. - Pallet changer with energy supply (hydraulic workpiece clamping) Dcsb Em Tsv E Ibnouhog - Pressure adjustment on the NC rotary table (50 - 240 bar) - High-pressure cooling with pressure increase to 60 bar - 3D path control - Speed increase through look-ahead technology & dynamic pre-control - Sludge cart for sludge removers - Special pallet similar to HDM with 50 mm hole grid and 2-way energy connection

Condition: ready for operation (used), H & B / S & F AVL 220 Electrical transmitter, measuring range 0-250 mbar, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Dcsb Em Tji Eac Neuhjg