Used Hurlimann 909 Xt for sale (27,868)

Condition: as good as new (ex-display), High vacuum extraction system for welding torches and soldering stations. IFA approved: tested in accordance with the W3 standard. Ideal for welding fume extraction directly at the source (torch extraction) and as a soldering station extraction system thanks to its high vacuum performance. Easy to operate thanks to the intelligent SPS control. Speed adjustment from 30 to 100%. High extraction power thanks to a continuous duty motor controlled by a frequency converter. Technical parameters of the device in the last photo. Fgj Ia Usvc U Rwe Sifjb The device is in very good condition (new, never used)

Condition: new, Functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) Fgo Ia U Serg Ebcsifeb - Winder / haul-off - Control system

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, Functionality: fully functional, total length: 2,700 mm, type of input current: three-phase, input voltage: 400 V, I offer a new machine for large format thermoplastic solutions for 3D printing. Fs Iourvzrea U Sifjgb Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: ready for operation (used), Year of construction: 2012, A Durst textile printer including Klieverik calender is available. 1) Large format textile printing machine Durst Rhotex 320 for sublimation prints, year of construction: 2012, print type: inkjet, max. print width: 3200mm, max. media thickness: 2mm, resolution: 600dpi, print speed: 65m²/h, colors: CMYK. Machine dimensions X/Y/Z: approx. 6800mm/1700mm/2000mm, weight: approx. 4500kg, printed area: approx. 385000m². Including dye sublimation and workstation. Two print heads must be replaced. 2) Transfer calender Klieverik GTC81-3400, year of construction: 2009, working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Including low-voltage winder, year of construction: 2019, documentation available. On-site inspection is possible. Only package sale possible. Fo Iev Tct Ioa U Sifogb

Condition: used, Functionality: fully functional, Textile Tunnel Dryer. Fgj Iov U D Ucea U Sifeb Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder BH45-30D with barrier screw and mixing section. Fge Ieuxa Abja U Sifeb 45mm extruder with 30L/D screw length The extruder is equipped with a new control system function-tested Several extruders of the same type available !

Condition: like new (used), Year of construction: 2021, type of input current: three-phase, filter area: 798 m², negative pressure: 4,300 Pa, overall weight: 21,000 kg, suction capacity: 105,000 m³/h, Central dust removal system, sawdust extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. The filter is pneumatically cleaned with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various technological processes. The device is like new - never used. Nestro JET 11557 self-cleaning bag filter Year of production - 2021 Filtration area - 798 m2 built-in 5 pcs. of fans with a power of 30 kW each Device efficiency - 105,000 m3/h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 21,000 kg The system meets ATEX requirements. The device is already dismantled for transport. Fs Ia U Sov E Hxloifegb Technical documentation available.

Condition: new, Year of construction: 2017, operating hours: 1 h, Functionality: fully functional, suction capacity: 1,450 m³/h, New extraction system to be sold due to company closure. Fge Ia Usv T I H Ts Sifsb

Condition: used, Year of construction: 2005, - Manufacturer Venjakob - Roller transport system - Feed speed continuously adjustable - Roller spacing 85 mm - Roller diameter 60 mm - Rollers rubberized Fge Iajvun Dus U Sifjb - Length 1,000 mm - Width 2,000 mm - Color RAL 400 / 50 - Location, in stock

Condition: new, Year of construction: 2025, Suction nozzle diameter: 200mm maximum vVolume flow: 3200 m³/h nominal volume flow: 2262 m³/h Fgo Ia U Siek Utq Ijfsb volume flow monitoring: pressure difference display Negative pressure: 2250 pa Filter area: 16 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 65 db Chaff bag volume: 320 l Filter cleaning: mororic Engine power: 4 kW machine length: 2340 mm Machine width: 880 mm Machine height: 2190 mm Weight: 385 kg

Condition: used, Year of construction: 2021, In this offer you purchase a used digital on demand textile printing system "Kornit Storm HD6" Object of sale: Fj Iaetr Dv Ts U Sifogb 1 x Kornit Storm HD6 incl. Chiossi E Cavazzuti Duo 1200 drying tunnel You will receive a tested and fully functional system Further information will follow Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 2008, operating hours: 200 h, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 2008 160 MA, This machine is suitable for extruding suitable ceramic, pasty masses using suitable tools. Fs Ia Usvyfzuo Sifjgb Further information on the system structure and technical data can be found in the extract from the operating instructions.

Condition: like new (used), Year of construction: 2021, type of input current: three-phase, filter area: 1,848 m², negative pressure: 4,300 Pa, overall weight: 16,000 kg, suction capacity: 63,000 m³/h, Central dust removal system, extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. Filters cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various types of technological processes. The device is like new - never used. Self-cleaning cartridge filter JET 11520 year of production - 2021 Filtration area - 1848 m2 built-in 3 fans of 30 kW each Device efficiency - 63,000 m3 / h Max vacuum - 4300 Pa Fo Ia U Sov E Hmioifogb Auger + ATEX rotary lock EX explosion-proof flaps Weight - 16000 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available.

Condition: used, Paint mist extraction, water irrigated system - Producer Reinox - Type WW 25/22 - Width 2.600 mm - Height 1.700 mm (2.250) mm - Depth 1.640 mm - Required space 2,75 x 2.45x1,65m mm - With irrigated exhaust system - With water circulating pump - Motor power 4,2 kW - Exhaust pipe 2 x 350 mm - With switch cabinet Fo Ijumvtqea U Sifegb - In stainless steel - Voltage / HZ 400 / 500 - Location on stock - Voltage fluctuation max. +/- 5 %

Condition: new, Year of construction: 2025, Suction nozzle diameter: 160mm maximum volume flow: 2000 m³/h nominal volume flow: 1448 m³/h volume flow monitoring: pressure difference display Negative pressure: 3000 pa Filter area: 10,5 m² Residual dust content: less than 0.1 mg/m³ Fgs Ijk Utq Sja U Sifsb Sound pressure level: 64 db Chaff bag volume: 160 l Filter cleaning: mororic Engine power: 3 kW machine length: 1800 mm Machine width: 820 mm Machine height: 2220 mm Weight: 320 kg

Condition: used, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning patron filter, pneumatic, vacuum. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side which reduces the risk of explosion to a minimum. In some cases, source exhausts and hoods are not a good option, for example, if metal parts are too large to be covered by exhaust arms, as in the shipbuilding and transportation manufacturing industries, or if welders are constantly moving between workstations. Plymovent has therefore developed a general filtration system that can control welding fumes in large facilities: Plymovent SCS Fge Ia Uovca R Ao Sifjb Installation of the system is easy because you don't need any pipes/channels. Not only does it save duct costs, but it is also a very flexible solution for facilities with multiple welding processes constantly changing locations. Brand: Plymovent / Euromate Model: SCS Cartridge filter cartridges - 2 pcs Filtration area of 150 m2 Sound-absorbing fan with noise suppressor with a power of 7.5 Kw. Built-in frequency converter. Capacity up to 9000 m3/h Filtration efficiency - 99.8% Dirt container - 100 liters Silencer included stock no.: 0819

Condition: new, Year of construction: 2025, Suction nozzle diameter: 250mm Maximum volume flow: 5000 m³/h Nominal volume flow: 3534 m³/h Volume flow monitoring: Pressure difference display Filter area: 25.4 m² Residual dust content: less than 0.1 mg/m³ Sound pressure level: 70 db Scavenging bag volume: 480 l Filter cleaning: mororic Motor power: 5.5 kW Extinguishing device: yes Machine length: 3510 mm Fs Ia U Sjpfat Ejifjgb Machine width: 880 mm Machine height: 2545 mm Weight: 850 kg

Condition: used, Year of construction: 2007, Functionality: fully functional, overall weight: 135 kg, suction capacity: 1,000 m³/h, negative pressure: 2,900 Pa, Welding fume extractor, dust extractor, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding and all kinds of dry dust. Cartridge filter element. Filter cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. Year of production - 2007 Fge Iaeu U Axze U Sifjb Fan power 1.5 Kw. Efficiency 1000 m3/h. Vacuum 2900 Pa Stock no. - 0926

Condition: new, Year of construction: 2025, Suction nozzle diameter: 160mm Maximum volume flow: 2000 m³/h Nominal volume flow: 1448 m³/h Volume flow monitoring: pressure difference display Negative pressure: 3000 pa Filter area: 10.5 m² Residual dust content: less than 0.1 mg/m³ Fj Iaov Drqwo U Sifjgb Sound pressure level: 64 db Chip bag volume: 160 l Filter cleaning: pneumatic Motor power: 3 kW Machine length: 1800 mm Machine width: 820 mm Machine height: 2220 mm Weight: 320 kg

Condition: like new (used), Year of construction: 2021, filter area: 1,568 m², suction capacity: 42,000 m³/h, Central dust removal system, extractor, dust extraction, self-cleaning, vacuum filter by NESTRO. Fs Ia U Sov Ewmgsifegb Filters cleaned pneumatically with compressed air pulses during operation, which ensures high efficiency of the device. For all types of dry dust in various types of technological processes. The device is like new - never used. Self-cleaning cartridge filter JET 11520 year of production - 2021 Filtration area - 1568 m2 built-in 2 fans of 30 kW each Device efficiency - 42,000 m3/h Max vacuum - 4300 Pa Auger + ATEX rotary lock EX explosion-proof flaps Weight - 12,500 kg The system meets ATEX requirements. The device is already dismantled for transport. Technical documentation available.

Condition: good (used), Year of construction: 1998, filter area: 84 m², suction capacity: 2,000 m³/h, Dust extraction, welding fume extraction, cartridge filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Fge Ia U Siettkgxofjb The filter is cleaned pneumatically by impulses of compressed air during operation, which makes the device highly efficient. Fan on the clean side, which reduces the risk of explosion to a minimum. Built-in 4 Kw fan Capacity of 2000 m3/h Filtration area 84 m2 Cartridge filter cartridges - 4 pieces. Inlet diameter 200 mm Length - 1.80 m width - 1.10 m height - 1.80 m

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Extraction arm with a range of 3 m Capacity 1600 m3/h Fj Ia U Setpui Ioifsgb Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: excellent (used), Year of construction: 2003, operating hours: 2,000 h, suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extractor, patron filter self-cleaning, pneumatic, vacuum for plasma, laser, sandblasting, soda blasting, shot blasting and all kinds of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2003 Operating hours: 2000 Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: Sound-insulated fan of 4 Kw. Capacity 5000 m3/h Vacuum pressure 3000 Pa Fgj Iaettuims U Sifjb Inlet diameter : 315 mm Filtration area: 50 m2 spark pre-catcher control cabinet Possibility to order new filter cartridges tailored to the customer's needs stock no.:0846

Condition: good (used), Sawdust extractor,dust extraction,self-cleaning filter,vacuum ALKO FU RG Filter cleaned pneumatically with compressed air pulses during operation, thus high efficiency of the device. 5,5 Kw fan Capacity 5940 m3/h Filtration area 30m2 Vacuum 3000 Pa Air return with ventilation ducts and summer/winter flap Noise attenuator Manifold with pneumatic gates for connection with machines Control cabinet with technical documentation. Customs sluice Additional 3 kw transport fan for transporting sawdust from the customs sluice Inlet 4 x 250 mm Dimensions: height - 4.35m Fe Ia U Seip Nqkoifsgb Width - 1.45m x 1.45m

Condition: good (used), Dust collector, extractor, self-cleaning vacuum filter, absorber, dust collector for extraction of graphite dust, metal dust, mineral dust, hard fibers, combustible, hazardous, toxic substances and effective collection of process dust, sandblasting, sodding, grinding, polishing and all kinds of dry dust. The dust extractor has explosion class ST1 and ST2 The vacuum fan is located behind the filter on the clean side which reduces the risk of explosion to a minimum. Pocket filter insert - multi-pocket 11 Kw fan in sound absorbing housing Fo Ia U Sisg Rhfbsfegb Capacity 3500m3/h Negative pressure 7000 Pa Filtration area 24 m2 Automatic filter cleaning by electric motor. The extractor has been working on graphite processing.