Used Spijkstaal 305 Lh for sale (3,041)

Condition: new, overall weight: 2,700 kg, empty load weight: 820 kg, maximum load weight: 1,880 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50R13C, 3-S tipper from trailer manufacturer HAPERT model COBALT HM-2 2700kg 305x180x100. In our opinion, Cobalt tippers from Hapert are extremely stable, very well equipped and also have a fair price. The high loader car trailer is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the tipper trailer at a glance. It has an extremely sturdy steel frame, hot-dip galvanized in an immersion bath, 70 cm aluminium dropside attachment, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium dropside walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000 kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for Hapert three-way tipping trailers. Dsln Norx S Shjtf Sjkl Here you will find a grid attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Condition: used, Year of construction: 2014, load capacity: 1,000 kg, fork length: 1,150 mm, drive type: Elektro, Low lift truck Load center: 600 Technical condition: very good Dkjlnou D Rxkj Ntf Sjl Battery Volt: 24V Battery Ah: 24Ah Battery year of construction: 2022 Description: The device is partially repainted, has new maintenance, new batteries and receives a current UVV inspection before delivery.

Year of construction: 2019, Condition: new, Electrically heated continuous furnace, make VEI-Engineering Dolod Sg Hhjn Ntf Sekl type: DLNTO-EB 830-500 heat treatment: tempering temperature max. 500°C working temperature: 220-450°C clear dimensions (w x h): 800 x 210 mm heated length: 4.950 mm heating power: 2 x 30 kW fans: 2 x 5,5 kW Cooling water for 2 heat exchangers: inlet max. 2 bar PLC: Siemens S7

Condition: new, machine/vehicle number: 10041, Year of construction: 2014, load capacity: 1,300 kg, New device with on-site warranty Dkolnot E Nk Tj Ntf Sel

Condition: used, machine/vehicle number: 6392, Year of construction: 2013, operating hours: 2,325 h, load capacity: 1,200 kg, lifting height: 1,650 mm, fuel type: electric, mast type: standard, construction height: 1,230 mm, Equipment: cabin, sideshift, Int. no.: 6392 Device details: Year of construction : 2013 Lifting capacity : 1200 kg Lifting height : 1650 mm Read operating hours : 2325 h Mast type : Standard Mast height : 1230 mm Length/width/height : 2470 / 800 / 1180 mm Operating weight : 1318 kg ---- Equipment: * DGS made of Plexi Delnetw Ag Ts Ntf Sokl ---- Further equipment information: Load capacity 1200/2000kg ---- The operating hours are generally measured hours. We are happy to offer you suitable transportation. Another 250 - 300 forklift trucks, attachments and sweepers immediately available for you. Also for hire, of course! We are happy to buy your OLD. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak english This offer is subject to prior sale and errors excepted. In the dealer's store, the device is sold as-is, not refurbished. All information without guarantee, errors and changes excepted.

Condition: excellent (used), Year of construction: 2021, operating hours: 14,841 h, Functionality: fully functional, Control: Fanuc 32i Automation: FMB UNIROBOT GP7-5Pkhs Grinding spindle: Jäger HF spindle Chuck: MicroCentric 4-410-3-QC Max. Ø80 Chip conveyor: Knoll compact filter with hinged belt conveyor Year of manufacture: 2021 Hours: 14841h Hardinge GT27SP CNC lathe: Control: Fanuc 32i Axes: 2 (X and Z) Travel paths: From operating manual measured on tool top plate Z: 286mm / X: 607mm Spindle speed max.: 6000rpm Dimensions of the machine LxWxH: 1850 x 1750 x 1750 Weight: approx. 2100Kg MARPOSS measuring system with automated Dimension compensation Oil mist filter S400 on extendable stand 1525 - 2740mm Spindle cooling possible, currently out of service due to MircoCentric chuck FMB UNIROBOT GP7 Robot: YASKAWA GP7 Control: YASKAWA YRC1000 Jaws: 3 jaws double gripper system with integrated presser and blow-off unit Axes: 6 Machine No.: 11-210314 R 1889290 Year of manufacture: 2021 Dimensions of the robot cell LxWxH: 1850 x 900 x 2000 Weight of the robot cell: No exact details approx. 1000kg Turning station in the robot cell 5x workpiece pallets 400x600mm, side 1: 77 parts / side 2: 150 parts Knoll filter system KF110/570 with Knoll hinged belt conveyor type 320 S-1/50 Filter type: belt filter Serial number: 1513866 Year of manufacture: 2021 Tank volume: 570L Pressure: 5-30Bar Dimensions of the filter system LxWxH: 1800 x 900 x 1900 Weight: No information, estimated at approx. 500-700Kg. Grinding spindle: Jäger SF spindle Type: Z100-M536.03 K1,2S5GS Max. speed: 36,000 rpm Supply voltage: 3-phase 200V-480V AC 50/60hz Frequency converter installed in the control cabinet, operation via external control interface Grinding spindle holder RINECK grinding wheel holder Accessories / tools: 3x MAS-MEX20-GT27-1-S385H holder 3x MAS-MEX20 turn sleeve Doln Ntevnt Dtef Sekl 3x MAS-turn ring 2x hydraulic expansion for internal extractor 1x hydraulic expansion for rotary holder + rotary holder 1x MARPOSS probe with holder

Condition: new, overall weight: 2,700 kg, empty load weight: 820 kg, maximum load weight: 1,880 kg, loading space length: 3,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, tire size: 195/50r13c, *3-S-K* tipper with leaf grid from *trailer manufacturer* HAPERT model COBALT HM-2 2700kg 305x180x30. Dsln Neqv Eidotf Sekl In our opinion, *cobalt tippers* from *Hapert* are extremely stable, very well equipped and also have a fair price. The *car trailer* as a *high loader* is designed for durability. High-quality equipment comes as standard with this three-way tipper. The extensive standard equipment of the *tipper trailer* at a glance. A corrugated grid attachment, extremely stable steel frame hot-dip galvanized, electro-hydraulics with battery, removable illuminated control unit, double-walled anodized aluminium side walls, all walls are foldable and removable, easy-to-operate eccentric locks, low chassis with 195/50R13C tyres, lashing eyes with 1000kg load capacity, net hooks, steel plate on wooden floor, automatic support wheel and a reinforced V-drawbar. We offer useful accessories for *Hapert three-way tipping trailers*. Here you will find an inexpensive side wall attachment, tarpaulin with frame, emergency hand pump, ramps, rear supports, 100km/h approval, tool box, lashing straps and lock.

Condition: new, Year of construction: 2025, Functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 4,000 mm, inner dimension length: 6,000 mm, inner dimension height: 3,000 mm, filter area: 99 m², volume flow: 7 m³/h, Equipment: documentation/manual, lighting, Blasting house for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. Djln Ntfou A A Tke Sekl For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Year of construction: 2016, Condition: as good as new (ex-display), Axial fan condenser, air ccoler Manufacturer: Güntner Model: GCVC RD 035.1/12-42-0007305P Doln Njnbff Ajtf Sekl Year of c.: 2016 2 fans Volume: 4,6 l Comressed air: 32,5 bar

Condition: new, Year of construction: 2012, Hydraulic station unit from the renowned Rexroth brand. The unit has never been used and is in perfect condition. It is ready for immediate industrial implementation. Technical Specifications and Features: Delnju Td D No Ntf Sokl Manufacturer: Rexroth Year of Production: 2012 Model: ABRPT-00630540 Motor: ABB Motors: Model: QA200L4A Power: 30 kW Speed: 1475 RPM Voltage: 690V/400V Weight: 256 kg Hydraulic Pump: Rexroth A10VSO 71 DFR1/31R-PPA12N00: Controller: Hydac ETS 1700 Please include your price offers directly when reaching out to us.

Condition: new, overall weight: 2,000 kg, empty load weight: 530 kg, maximum load weight: 1,470 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, suspension: other, Year of construction: 2022, machine/vehicle number: Ki1666De, Product information "Debon rear tipper DK 155x305cm 2.0t|E-pump|Promotion" Tipper with e-pump The DK tipper trailer is an extremely practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and the rear tipper can be positioned particularly flexibly for unloading. The folding side walls are 30 centimetres high. With an unladen weight of 530 kilograms, the tipper trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is specially raised. The wooden floor plate of this reverse tipper is covered with a steel plate. The floor frame profile is equipped with six lashing brackets. Convenience is a top priority The loading area can be tilted backwards using an electric pump. An overrun brake prevents the towing vehicle from being pushed by the load when stopping or on slopes. All load-bearing steel frame parts are hot-dip galvanized. If required, a 60 centimeter high lattice extension can be supplied as an option. Special features Double-walled anodized aluminium side walls Deln Ntoi R Hvhef Sekl Rear tipper with electric pump + battery Heavy-duty jockey wheel Further equipment Removable drop sides, folding Stable screen-printed floor / sheet steel floor on the floor plate Axle and drawbar completely hot-dip galvanized 6 tie-down points in the floor 12 volt electrics, 13-pin plug with reversing light Frame welded and completely hot-dip galvanized. Other documents Vehicle registration certificate part 2 / Accessories available at extra cost - see below - If you would like to buy this trailer or have further trailer queries, please use our internal tipper trailer "No. 1666".

Condition: refurbished (used), Year of construction: 1991, Functionality: fully functional, punching force: 50 t, stroke distance: 60 mm, material thickness: 15 mm, punching diameter: 100 mm, punching pressure: 50 t, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to Dksln Ntfevdiduo Sol - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: new, overall weight: 3,000 kg, empty load weight: 770 kg, maximum load weight: 2,230 kg, loading space length: 3,050 mm, loading space width: 1,780 mm, loading space height: 850 mm, tire size: 185/60R12, Felge schwarz, Three-way tipper with attachment from the manufacturer ANSSEMS model KSX3000 305x178E Go-Getter. The standard equipment of the Anssems tipper includes a steel floor, swinging and removable corrugated grid attachment, lashing eyes on the outside of the frame and inside, black rims, black aluminum side walls, all folding and removable, LED lighting, storage box, electric hydraulics with battery and cable remote control, drive-on rail shaft (rails at extra charge), sturdy welded steel frame, support wheel and a V-drawbar. Dkoln Ntfeq Rfn Se Sjl We also offer accessories for Anssems tipper trailers with grid attachment such as flat tarpaulin, ramps, support set, lashing straps, net hooks, trailer net and anti-theft device.

Condition: new, Year of construction: 2025, Functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. Djlsu Hy Tpon Ntf Sekl 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 180.5 kW, AEG Thyristor, AEG Thyro-A, 2A 400-350 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3057 Year: 2012 Dimensions: 1020 x 530 x 2130 mm Weight: 200 kg Cabinet: 400 V; 3-phase; 50 Hz; 262 A; 180.5 kW Dslorbzygjn Ntf Sekl Power transmission system AEG Thyro-A 2A 400-350 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 350 A Cooled Power regulator Load supervision on analog outputs

Condition: used, Year of construction: 2023, front tire size: 600/70R30, rear tire size: 710/70R42, Equipment: compressed air brake, OLIVE GREEN METALLIC Armrest with hydraulic joystick SmartTouch Terminal / Deln Ntfot Srcrj Sskl

Condition: used, overall weight: 2,000 kg, empty load weight: 530 kg, maximum load weight: 1,470 kg, loading space length: 3,050 mm, loading space width: 1,550 mm, suspension: other, Year of construction: 2022, machine/vehicle number: Ki1667De, Product information "Debon rear tipper DK 155x305cm 2,0t|E-Pump|Grid|Action" Rear tipper DK 155x305cm 2,0t|E-Pump|Grid|Promotion The DK tipper trailer is an extremely practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and the rear tipper can be positioned particularly flexibly for unloading. The folding side walls are 30 centimetres high. With an unladen weight of 530 kilograms, the tipper trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is specially raised. The wooden floor plate of this reverse tipper is covered with a steel plate. The floor frame profile is equipped with six lashing brackets. Convenience is a top priority The loading area can be tilted backwards using an electric pump. An overrun brake prevents the towing vehicle from being pushed by the load when stopping or on slopes. All load-bearing steel frame parts are hot-dip galvanized. Special features Double-walled anodized aluminium drop sides Rear tipper with electric pump + battery Heavy-duty support wheel Mounted grid attachment Further equipment Drop sides Removable, folding Dkeln Ntei R Hv Nof Sol Stable screen-printed floor / sheet steel floor on the floor plate Axle and drawbar completely hot-dip galvanized 6 tie-down points in the floor 12 volt electrics, 13-pin plug with reversing light Frame welded and completely hot-dip galvanized. Other documents Vehicle registration certificate part 2 / Accessories available at extra cost - see below - If you would like to buy this trailer or have further trailer queries, please use our internal tipper trailer "No. 1667".

Condition: used, mileage: 622,000 km, first registration: 07/2018, Road tractor, XXL cab, Automatic transmission, Retarder, Stationary climate, ADR AT FL OX EXII EXIII, Km 622,000 Delspwg Hhsn Ntf Sskl

Condition: new, overall weight: 3,000 kg, empty load weight: 770 kg, maximum load weight: 2,230 kg, loading space length: 3,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/60R12, Felge schwarz, Three-way tipper from the manufacturer ANSSEMS model KSX3000 305x178E Go-Getter. Dkjln Ntfsq Rfnkj Sol The standard equipment of the Anssems tipper includes a steel floor, lashing eyes on the outside of the frame and inside, black rims, black aluminum drop sides all foldable and removable, LED lighting, storage box, electric hydraulics with battery and cable remote control, drive-on rail shaft (rails at an extra charge), sturdy welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems tipping trailers such as high tarpaulin, side wall attachment, grid attachment, wheel stopper, support set, lashing straps, nets and anti-theft devices.

Condition: new, Year of construction: 2025, Functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction Dsln Nju Ey Dletf Sskl

Condition: new, Year of construction: 2012, Electric power transmission cabinet, Electrical distribution cabinet, Electrical cabinet 600 kW, AEG Thyristor, AEG Thyro-A, 2A 400-495 HFRL1, Thyristor converter, Power controller, Electric power transmission cabinet for furnace, Used machine Manufacturer: Amarc srl Type: 120254; 3058 Year: 2012 Dimensions: 1800 x 515 x 2130 mm Weight: 400 kg Dslnsrby Uvj Ntf Sskl Cabinet: 400 V; 3-phase; 50 Hz; 868 A; 600 kW Power transmission system and distribution AEG Thyro-A 2A 400-495 HFRL1 (Thyristor) AEG Thyro-A: Thyristor 400 V 495 A Cooled Power regulator Load supervision on analog outputs

Condition: used, Year of construction: 2023, black metallic / Dkelnjrxtb Us Ntf Sjl

Condition: good (used), Year of construction: 2006, operating hours: 48,000 h, Functionality: fully functional, machine/vehicle number: A0230A1295, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, No minimum selling price - guaranteed knockdown to the highest bid! TECHNICAL DETAILS Make: TRUMPF Type: Trumatic L 3050 - 5 kW Year of manufacture: 2006 Working range X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Control system Type: Siemens Sinumerik 840 D Laser power Laser power: 5,000 W Max. Sheet thickness: Mild steel 25 mm Max. Sheet thickness: Stainless steel 20 mm Max. Sheet thickness: aluminum 12 mm Operating hours Operating hours: approx. 48,000 hours EQUIPMENT Closed machine frame with integrated laser unit Laser unit: TLF 5000 CO₂ laser, high-frequency excited, cooling unit, logbook function Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Gantry drive in combination with linear direct drives Laser power control HI-LAS high-pressure cutting Plasma sensor system (PMS) Fast processing with SprintLas ContourLas for the production of small holes Dksln Ntfsu R Sa Ae Sjl Programmable power cycles Microweld Programmable cutting gas pressure setting Laser cutting head with 5" lens and laser cutting head with 7.5" lens Quick-change cutting head device Automatic sheet outer edge detection Capacitive height control (DIAS) Process Control System (PCS) Position laser diode Automatic switch-off Work area lighting SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice Workshop programming ToPs 100 lite Safety and security Multi-beam light barriers Beam guidance completely encapsulated and ventilated with nitrogen Monitoring system Multi-chamber extraction and compact dust extractor Protective cabin Network connection BNC/RJ-45 network connection Electrical equipment Voltage: Three-phase current 400 V / 50 Hz EXTENDED EQUIPMENT Liftmaster included

Condition: new, Year of construction: 2025, Strahlhaus 16x5m with Jet car and flat funding base. Flat funding base, worm ditch, bucket elevators, magnetic separator, treatment, material bunker, blasting medium refill, ink jet pressure blower, filter system with cleaning. Lining the walls with 4mm fabric rubber. Dkjln Ntsdhlikef Ssl For questions about technical specifications, etc. contact us in writing or by telephone. Basis of the machines is the production at the site Großenlüder since 1971 Harth & Seifert - Georg Fischer - SAH and Seidl - Oliver Fritz GmbH & Co. KG with the long-time known contacts.

Condition: used, Year of construction: 2023, front tire size: 600/70R30, rear tire size: 710/70R42, Equipment: compressed air brake, BLACK METALLIC Rear wheel weight 250kg Armrest w. hydraulic joystick / ValtraGuide Submeter (Novatel) + TwinTrac leather driver's seat painted wheel weights / Deln Ntfett I Nro Sekl