Used Hurlimann H-358 Prestige for sale (24,263)

Condition: used, Year of construction: 1995, Universal CNC Milling Machine Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Speed range: Spindle speeds continuously adjustable within 3 switching steps: 20 to 6,300 rpm Tool holder: SK40 Tool changer Horizontal and vertical tool holder: ISO 40 DIN 2079 Hydromechanical tool clamping, clamping force (vertical): 10,000 N Hydromechanical tool clamping, clamping force (horizontal): 12,000 N Spindle diameter at the front bearing, horizontal / vertical: 75 / 55 mm Quill stroke vertical: 75 mm Renishaw 3D probe Individual feed motors for each axis – three-phase current (brushless) Feed range in X, Y, Z manual / program-controlled: 1 to 2000 / 10,000 mm/min. Feed force in all axes (at 80% duty cycle): 6,000 N Rapid traverse in all axes: 10 m/min. Angle table: 900 x 458 mm Universal clamping table, tilt range 15° from and 30° to the machine Tabletop swivel range +/- 25°: Ø 420 mm Tabletop swivel range +/- 30°: Ø 650 x 395 mm Table weight: 275 kg Maximum table load: 500 kg Number of T-slots: 7 T-slot spacing: 63 mm T-slot width: 14 H7 NC rotary table: Tabletop swivel range +/- 30°: Ø 500 mm Tabletop swivel range +/- 4°: Ø 650 mm Coolant tank: 170 liters Flow rate/pressure: 40 L/min. at 3 bar Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions LxWxH approx.: 2,950 x 2,200 x 2,300 mm Dob Hjv Rpr Sedwp Rout Information: If you tilt the vertical milling head from its zero position to a +/- angle position, e.g., to produce inclined surfaces or holes, the working range of the Y-axis is reduced from 450 mm to 410 mm. 080525

Condition: like new (used), operating hours: 83,500 h, machine/vehicle number: IntNr231113, IntNo. 231113 Goods tariff number 8457 10 10 00 Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-station plate changer and 4-station pallet station NC rotary table 360° Precision package Tool holders Steep taper: HST 100* DIN 69893 Form A Tool magazine positions chain: 1 x 90 & 1 x 90 Chip conveyor including belt filter from Knoll BILUTEC Air Technology – Filtration Systems Machine number: 28840003102 Year of manufacture: 2001 Control system: Siemens Sinumerik 840D Operating hours: approx. 83,500 h Specifications Technical data Main drive • Direct drive via liquid-cooled, variable-speed induction motor • Speed ranges, continuously programmable: o Operating mode: 0 to 6,000 rpm o Setup mode: 0 to 800 rpm o Manual Interventions: 0 to 5,000 rpm • Torque: o S1 – 100% duty cycle: max. 300 Nm (220 lb-ft) o S6 – 40% duty cycle: max. 440 Nm (322 lb-ft) • Power: o S1 – 100% duty cycle: 25 kW (33 hp) o S6 – 40% duty cycle: 37 kW (49 hp) Feed drive • 3-phase AC synchronous servo motors • Feed rate of the X/Y/Z axes: o Continuously programmable: 1 to 40,000 mm/min (0.04 to 1,575 in/min) o Rapid traverse: 40,000 mm/min (1,575 in/min) o Set-up mode: 1 to 2,000 mm/min (0.04 to 79 in/min) o Manual interventions: 1 to 5,000 mm/min (0.04 to 200 in/min) • Feed force: o X/Z axes (100% duty cycle): max. 15,000 N (3,372 lb) o Y-axis (100% duty cycle): max. 10,000 N (2,255 lb) Measuring system • Resolution, smallest input step: o X/Y/Z axes: 0.001 mm (0.0004 in) • Position tolerance (according to VDI/DGQ 3441): o Direct measurement of the X/Y/Z axes: 0.010 mm (0.004 in) o Direct measurement of the B-axis: 14 arc seconds Rotary table • Speed: max. 19 rpm • Clamping force of the pallet: 120,000 N (27,000 lb) • Tilting moment: max. 16,000 Nm (3,520 lb-ft) • Tangential moment: max. 4,800 Nm (3,523 lb-ft) Pallet • Quantity: 1 • Size: 500 x 630 mm (19.7 x 24.8 in) • Permissible load per pallet: o When using 1 pallet: max. 500 kg (1,102 lb) o When using 2 pallets: max. 900 kg (1,984 lb) • T-slots: o Quantity x width: 4 x 14 mm (0.16 x 0.55 in) • Guide slot: o Quantity x width: 1 x 14 mm (0.04 x 0.55 in) Working area • Travel range: o Tool diameter greater than 200 mm (7.87 in): o Tool diameter less than 200 mm (7.87 in): Duob Hdwewh R T Rsp Rst o Asymmetric travel range: o X-axis: 800 mm (31.5 in) o X-axis: mm (+19.7/-15.7 in)  Y-axis: 710 mm (27.9 in)  Z-axis: 710 mm (27.9 in)  B-axis: 360° Machine size: 4,600 x 2,400 x 2,700 mm Machine weight: 10,500 kg 1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg 1x Control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg 1x Chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg 2x Pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg 1x Euro pallet with hydraulic unit 1x Euro pallet with some accessories 1x Euro pallet with covers: L = 200 cm x W = 100 cm 1x Filter holder: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg 1x Tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg 1x rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg Delivery time at short notice upon request. The machine can be inspected by appointment. Subject to changes and errors in the technical specifications and information, as well as prior sale! Horizontal machining center Manufacturer: DMG Deckel Maho Type: DMC 80H hi-dyn. RS4 with 2-fold plate changer and

Condition: used, Year of construction: 2015, Working dimension X: 3.740 mm Working dimension Y: 1.570 mm Working dimension Z: 250 mm Independent Z-axes: 2 Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Main motor power: 10 kW Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool clamping system: HSK-F63 Tool changer positions: 34 Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Positioning aid: Yes Laser setup aid: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Control: PC control Conformity marking: CE mark Dujb Hswidzwsdwp Rjt Total connection: 29 kW

Condition: good (used), Functionality: fully functional, Oerlikon Leybold Vacuum GmbH Vacuum Pump, WSU 2001 H PFPE Model: WSU2001HPFPE Condition: Used Dueb Hdwpswic Nas Rst General: Connection flange: DN 160 PN6 Speed (50/60 Hz): 3000 / 3600 rpm Maximum permissible pressure drop: 50 mbar Nominal pumping speed (50 Hz): 2050 m3 h-1 PFPE: with perfluorinated polyether

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,674 h, Control Unit Model CC300 microcomputer Brand ENGEL Injection Unit Screw diameter 45mm Clamping Unit Duob Hdjwhr I Njwp Ret Clamping force 500 tons Additional Equipment Tool heating: 32 control circuits, max. heating output 60 kW Vacuum compressed air circuits: With Venturi nozzle and pressure switch Solenoid air valves: 2/2-way, R1/2 inch Autoprotect injection monitoring: Self-learning system for mold protection Advanced material package: For thermoplastics up to 350°C, max. reinforcement level 30% This Engel Duo 740 H / 740 M / 500 WPX combi M injection moulding machine was manufactured in 2019. It features a two-plate compact design, minimal footprint, and intelligent servo-hydraulics for reduced energy consumption. The machine includes a CC300 microcomputer control system with a 21.5" full HD touch screen and advanced material package suitable for thermoplastics up to 350°C. For more information about this injection moulding machine, please reach out to us. Application Types Injection Moulding

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dujbjwhf Hfs Hdwp Rot Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition

Condition: good (used), Year of construction: 2003, Machining Center Manufacturer: Matsuura Type: H Plus 405 PC6 Year of Manufacture: 2003 CNC Control: Fanuc G-Tech 16i Travel: X/Y/Z: 600 x 600 x 600 mm Table Size: 500 x 500 mm 6-Station Pallet Changer Dusbeltlx Ns Hdwp Ret 120-Station Tool Magazine 4th Axis Knoll High-Pressure System Internal Coolant 70 bar 080525ä

Condition: good (used), power: 309 kW (420.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 12,452 h, Equipment: air conditioning, General information Field of application: Construction Serial number: VCEL260HL00001089 Technical information Chassis type: articulated AdBlue system: Yes Make of engine: D13J Top speed: 36 km/h Empty weight: 39.000 kg Condition Debswgnzve Hdwp Rsut Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 70 Output of the auxiliary hydraulics: 252 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,47x2,4x3,72 Production country: SE Additional information Please contact Antoon Schroder, Dennis van Loon or Jeroen Rijk for more information

Condition: used, Year of construction: 2015, Working dimension X: 3.090 mm Working dimension Y: 1.530 mm Working dimension Z: 85 mm Number of milling spindles: 1 Main motor power: 10 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 11 Linear tool changer: Yes Vertical drilling spindles: 8 Gantry machine: beidseitig angetriebene Gantrymaschine Automatic central lubrication: Yes Machine table: Matrix table Tool charge measurement: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Djbswh Rnuo Hdwp Rjut Safety device: Light barrier Control: PC control Handheld terminal: Yes Software: FORMAT 4 WOOD FLASH Conformity marking: CE mark Total connection: 25 kW

Condition: used, Year of construction: 1990, fuel type: diesel, lifting capacity 2,5 Tonnen Luftreifen height of stroke 4400 mm 1200 mm Djb Howhq Arodwp Reut defekt mindestens 3000 St

Condition: excellent (used), Year of construction: 1997, Schliesing 400 MX Weight without accessories 2000 kg Engine power 37 kW Duoboini U Ts Hdwp Rst capacity 16 m³/h passage 200 mm

Condition: excellent (used), Year of construction: 2008, MESPACK type H-180-FE powdered sugar bagging machine Year 2008 Filling in 2 stages 1 filler fills half, 2 filler fills other half Capacity: 50 bags per minute. Cartoning machine OTOR SYSTEMS type FCR 214 Capacity: 5 cartons of 10 bags per minute Year 2011 Duob Hdwjtn Rarsp Ret

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, first registration: 08/2019, next inspection (TÜV): 01/2026, Year of construction: 2019, total width: 2,550 mm, total height: 3,950 mm, Equipment: ABS, H&W (Vreden) AGRAR- Walkingfloor 70 cbm in full equipment First registered 08/ 2019, from 1st hand Dob Hdwpjwhd Eye Rout Dimensions i.L. (LxWxH) 12,000 x 2,480 x 2,323/ 2,566 mm (conical design) Fifth wheel height 1,250 to 1,300 mm Total height 3,950 mm SAF axles "Off-Road" with large disc brakes 430 mm WABCO trailer EBS with RSS stability program Chassis fine-grain steel, hot-dip galvanized Forced steering 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points set on the outside Tires 445/65 R 22.5 (also available with field tires/low-pressure tires) Cargo floor AGRAR with 15-board system, reinforced version 10 mm RADIO remote control floor and rear wall flap Profile joints of the side walls completely welded from the inside (grain version) 2x reinforced crossbars Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Hydraulic connections on the front wall and also on the support legs HYDRAULIC REAR WALL FLAP, controlled via the radio remote control PNEUMATIC PARTITION POSITIONER RENTING is the new BUYING, ALSO immediately available from us in full-service rental-----

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Dsb Hdjvu Tthowp Rsut Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Condition: new, Reihansl RSH-3.6 / 600 KZ pump SN: 358-11-95, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dujb Hdwpoi D Nbfe Rjt

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 Dueb Hog Akgtjdwp Rot +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Countersink make Sassex 90 degrees diameter 65 mm27 mm smallest hole to be countersunk MK 4Type H 3 52.1-65Ges.length 284 mm Duob Hdjd St Nwowp Ret

Condition: used, Year of construction: 2017, Carrying capacity: 500 kg Dob Hdwev Ei Shop Rout Number of suction pads: 8 With chain hoist: Yes Mounting flexible: Yes For panels: Yes Horizontal panel transport: Yes Conformity marking: CE mark

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Duob Hjwf Dddjdwp Ret very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 1982, Spindle diameter 160 mm Axes X 3000 mm Y 2500 mm Z 1600 mm W 1250 mm Spindle revolutions 800 rpm Machine dimensions 5900 x 12440 mm x 7620 mm Machine weight 68 000 kg Including rotary table E 20 Dueb Hdjwhpxrjwp Rst

Condition: ready for operation (used), Forkardt F315 J8 H lathe chuck - outer diameter 320mm,used, good condition, 100% working, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dueb Houlqhmsdwp Ret

Condition: used, Year of construction: 2014, operating hours: 2,638 h, 2014 | Haulotte | Haulotte H 25 TPX (25.3 meters) | Used Telescopic Boom Lift | 2638 hours 📍Location: France, Illange 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 19200 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 34 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine needs maintenance ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "36687 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation Deb Hjwf Aqcsdwp Rjut

Condition: used, Year of construction: 2017, Working dimension X: 3.000 mm Working dimension Y: 1.550 mm Working dimension Z: 250 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Rotation speed max: 24.000 rpm 4th axis: Yes 5th axis: 5-axes spindle Tool changer positions: 28 Dusbev Ezk No Hdwp Ret Linear tool changer: Yes Disc tool changer 18-fold: Yes Pickup change place: Yes Vertical drilling spindles: 12 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Number of consoles: 6 Pneumatic pipe connectors: an den Konsolen Vacuum pump: Yes Safety device: Safety mat Chip conveyor: Yes Interface for .dxf data: Yes Automatic lubrication: Yes Chip deflector: Yes Control: PC control Software: FORMAT 4 WOOD FLASH, MICROSOFT WINDOWS 7 Total connection: 19 kW

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm with electrical cabinet Dob Hdewf A U Uewp Rsut AVAILABLE AND READY TO WORK

Condition: used, Year of construction: 2022, Working dimension X: 3.300 mm Working dimension Y: 1.250 mm Deb Hdwpswg Smvo Rjut Working dimension Z: 150 mm Number of milling spindles: 1 Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes Tool clamping system: HSK-F63 Tool changer positions: 12 Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in Y-direction, in X-direction Gantry machine: einseitig angetrieben Machine table: Pod and rail table Two rows of stops: Yes Workpiece support aids: Yes Number of consoles: 6 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Bumper Pendulum machining: Yes Interface for .dxf data: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Handheld terminal: Yes Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, FORMAT 4 F4 CREATE, PC office licence Conformity marking: CE mark, UKCA-Zeichen Total connection: 18 kW