Used Hurlimann H-6130 for sale (24,101)

Condition: good (used), Year of construction: 1989, vacuum pump, rotary vane pump -Manufacturer: Becker, vacuum pump type VT 3.16 -Drive: kW / 1420 rpm voltage 380 volts Duob Hl Dorgtfreaust -Volume flow: 16 m³/h -Suction pressure: -850 mbar -Dimensions: 430/220/H280 mm -Weight: 23 kg

Condition: used, mileage: 10,761 km, power: 346 kW (470.43 HP), gearing type: automatic, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, first registration: 07/2023, next inspection (TÜV): 07/2025, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Standard warranty, extended liability for material defects 48 months max. 200,000km WITHOUT TRAILER SURCHARGE!!! Construction site package, trailer package, EBS, full brake assistant, steering brake, roll-away lock, 2 rotating beacons on FH, LED lighting, front rear view camera, ASR, emergency brake assistant, lane departure warning system, PTO gearbox-dependent, MAN Mediasystem Advanced Navi 7'', Navi map Europe+Russia, RIO BOX, smartphone integration, Rockinger SK5 towing hitch, broom and shovel holder, side deflector plates on skip side wall, longitudinal deflector plates on skip side wall. Longitudinal deflector plates on body side wall, protective roof screwed over the entire width of the body, PVC roll-up tarpaulin, 3x tarpaulin fastening with tensioning strap and ratchet on the side, Dob Hot Hn Awsl Daueut

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, Metallkraft AKM 220-4 H hydraulic notching machine, built in 2016 Well-maintained, very good condition. Maximum cutting pressure: 22 t Dsb Hl Daev Iy Ureuout Cutting range length: 200 mm Cutting range width: 200 mm Working table length: 700 mm Working table width: 600 mm Cutting capacity at 90° (material with tensile strength 400 N/mm²): 4 mm Cutting capacity at 90° (material with tensile strength 600 N/mm²): 2 mm Cutting angle: 90° Number of strokes: 50 /min Stroke adjustment: 4 mm Length (product) approx.: 830 mm Width/depth (product) approx.: 700 mm Height (product) approx.: 1050 mm Net weight approx.: 375 kg #8239

Condition: reconditioned (used), Functionality: fully functional, operating pressure: 160 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 214 kg, warranty duration: 6 months, HOT WATER WASHER KRANZLE THERM 1160 The device has new equipment, including a German brand R+M gun, stainless steel lance, steel braided hose and 25° power nozzle A durable brass head with new ceramic pistons and seals guarantee long and trouble-free operation A very efficient three-phase motor ensures stable operation even with long-term use Thanks to the operating parameters of 160 bar and 1160/h, the machine can be effectively used for heavy work in construction, logistics and agriculture Each device offered by us has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: KRANZLE THERM 1160 Supply voltage [V]: 400 Pressing capacity [l/h]: 1160 Working pressure [bar]: 160 Connection power [kW]: 6.4 Hose length [m]: 10 Weight [kg]: 214 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW pressure lance made of stainless steel NEW reinforced pressure hose in steel braid 10m Duebjv Stgve Hl Daust NEW power nozzle 25° Water filter and GEKa claw connectors - FREE KEY FEATURES: Open oil system - no operating time limit Very legible and intuitive control panel Simple construction and good access to individual elements under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 1992, Anleger - CMC Einsteckmaschine - Feeder - CMC Inserting machine RITMICA Universal H-200Year 1992 - Serial-No. H-200 2 Feeder for CMC Inserting Machine Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dujb Hl Daeh Ax Sneuet

Condition: used, mileage: 917,575 km, power: 309 kW (420.12 HP), first registration: 09/2007, fuel type: diesel, number of seats: 46, gearing type: automatic, emission class: euro5, color: red, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, sleeping cabin, KM reading according to speedometer Engine: Volvo Euronorm: 5 Gearbox: Automatic Seats: 44+1+1 sleeping seats with lap belts _____ Safety Retarder * Cruise control * Adaptive cruise control * ABS, ESP * Fog lights * Immobilizer * Xenon lights * Rear view camera * Multifunction steering wheel Passenger compartment Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Kitchen * Refrigerator * Central toilet Djb Hljquq Rxo Dauout * Leather head inserts * Tour guide microphone * Driver microphone Exterior Trailer coupling * Raising/lowering system * Power steering * Tachograph with card * Sun visor * Sleeping cabin * Electric exterior mirrors * Ski case eyelets * Central locking * Roof hatches, fans, roof vents Audio [&] Communication Navigation system * Radio, CD * TV/DVD Other German vehicle documents * Vehicle dimensions: length 12.30m, width 2.55m, height 3.61m * Hubcaps * Twin tires * Tires: front: 80%, rear: 40% * Our internal vehicle number: 9709 Errors excepted. Images and text may differ from the vehicle. Over 300 vehicles always on offer.

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm control: Heidenhain TNC 425 spindle taper ISO: SK 40 DIN 69871 quill stroke vertical: 75 mm distance between column - table edge: 190 (fest) vertikal mm spindle head swivable left - right: 90° Vertikal-Spindel ° distance between table/spindle: min./max.: 165/565 Vertikal-Spindel mm distance between table/spindle: min./max.: 165/565 Horizontal-Spindel mm turning speed range: 20 ... 4500 U/min tool changer with: 32 tools (Typ HTC 32) feed:: 1 ... 5000 mm/min Table dimensions: 850x440 mm table swivelabel +/-: nein = starr ° table load: 500 kg total power requirement: 15 kW weight approx.: 3500 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet LxWxH: 1,6 x 0,6 x 1,7 m Universal Milling and Drilling Machine Equipment: - cooling tank capacity 100 litres, flow rate 16 l/min - control panel with jib length arm Dob Hl Dju Nc T Rsaujut - hand wheel control unit - 8 pieces machine base The machine can be demonstrated under power. i.D. *

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO TURBOMIX FULL AUTOMATIC MOBILE CONCRETE BATCHING PLANTS are ideal solutions for the projects that require short term and a compacted settlement on a dedicated job site. Since all the equipment of a concrete plant is assembled on a single mobile chassis, the plant can be moved easily by only one truck. Productivity of TURBOMIX mobile concrete plants vary from 30 m3/h to 150 m3/h. FABO TURBOMIX series of mobile concrete batching plants have automatic control, static/dynamic Load Cell Weighing of aggregate materials and additives. Concrete plants have qualitative and strong concrete mixer, which provides high capacity homogeneous mixture. TECHNICAL SPECIFICATIONS: Model: TURBOMIX 110 Production capacity: 100 m3 Dimensions (length x width x height): 16300 x 3200 x 4500 mm Mixer type: Twinshaft – 2.2 m3 Aggregate bunker: 4x17 m3 Transfer conveyor: 6250 kg Cement weighing: 1300 kg Additives weighing: 40 kg Water weighing: 750 lt Total weight: 27550 kg Total motor power: 105 kW Cement silo is optional. Turbomix 110 consists of: • Aggregate Storage Hopper Duob Hl Daowai Dlsust • Aggregate Weighing Hopper • Aggregate Transfer Conveyor • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2008, Vacuum lifter Dusbjqxat Hj Hl Dauet VacuMaster Type:VM-ECO-500-H-1 Year 2008 in good condition .

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 1,000 mm, table length: 3,100 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY FROM STOCK 2025 MODEL NEW AND UNUSED 150 TONS H TYPE HYDRAULIC PRESS TECHNICAL SPECIFICATIONS TYPE STEEL CONSTRUCTION, 8 SLIDE H PRESS BODY TYPE BODY MATERIAL St52 – ERDEMİR CAPACITY (RAM) 150 TONS MOVABLE TABLE DIMENSIONS 3100 x 1000 mm FIXED TABLE TABLE DIMENSIONS 3100 x 1000 mm Dob Hl Djv Inrloausut PARALLELITY TOLERANCE 120 micron/mt. PERIPHERALITY TOLERANCE 60 micron/mt. STROKE (RAM) 600 mm MIN. INTERMEDIATE SPACE 100 mm MAX. INTERMEDIATE SPACE 700 mm WELDING STRESS REMOVAL Stress relief by vibration WELDING APPLICATION - EN ISO 15614-1/2017 welding application certificate accredited by TÜRK-AK and approved by WPQR and WPS. (Welding applications are supervised by “welding coordination engineers” certified according to EN ISO 14731) MAX. WORKING PRESSURE 250 Bar TOTAL MOTOR POWER 22 kW– IE3 MAIN PUMP 37 cm³ – PARKER MOVING TABLE FAST Descent Speed 140 mm/sec. MOVING TABLE SPINNING SPEED 14 mm/sec. MOVING TABLE RETURN SPEED 170 mm/sec. MAIN CYLINDER INNER DIAMETER Ø 160/120 mm – Ck45 – 3 pcs. ASSISTANT CYLINDER INNER DIAMETER Ø 90/70 mm – Ck45 APPROXIMATE HEIGHT OF PRESS 4000 mm APPROXIMATE WIDTH OF PRESS 3500 mm APPROXIMATE DEPTH OF PRESS 2000 mm LOWER TABLE HEIGHT FROM THE GROUND 1000 mm PRE-FILL VALVE NG 80 – 3 pcs. HYDRAULIC UNIT PARKER COOLING SYSTEM SUCTION – CIESSE ENGINE CLASS USED FOR THE UNIT IE3 LEVEL INDICATOR PARKER AIR FILTER PARKER – 10 MICRON PERMEABILITY RETURN FILTER PARKER – 25 MICRON PERMEABILITY OIL AND HEAT INDICATOR PARKER VALVES USED PARKER LUBRICATING STYLE AUTOMATIC – (ADJUSTABLE FROM THE SCREEN) RAM STROKE ADJUSTABLE FROM THE SCREEN RAM TONNAGE (PRESSURE) ADJUSTABLE FROM THE SCREEN SYSTEM ERROR INFORMATION CAN BE SEEN ON THE SCREEN PRESS STATUS INFORMATION SCREEN VISIBLE ON THE SCREEN MOULD MEMORY CAN BE ADJUSTED FROM THE SCREEN HYDRAULIC UNIT OIL TEMPERATURE INFORMATION CAN BE VISIBLE ON THE SCREEN LINEAR DISTANCE SCHEDULE NOVATECHNIK PLC APPLICATION DELTA TOUCHSCREEN PANEL DELTA 7 ‘’ SWITCH MATERIALS SIEMENS – SCHNEIDER APPROXIMATE WEIGHT 20 TONS

Condition: used, Year of construction: 2014, Functionality: fully functional, Info: 1 x 7 positions Max.: 2000 x 3300 glass Loading Field 3 x 340 mm (400) 4 x 230 mm (290) Transport dimensions: W 3005 x L 4200 mm Info: 1 x 6 positions Max.glass boxes: 3300 x 2000 Loading Field 2 x 330 mm 4 x 230 mm Loading height 2000 mm Floorspace Front W2600 x L4300 mm x H2800 mm Duob Hjv Ib I Tel Dauot

Condition: used, mileage: 36,256 km, power: 123 kW (167.23 HP), first registration: 03/1974, fuel type: diesel, number of seats: 21, gearing type: automatic, color: red, brakes: retarder, Equipment: ABS, air conditioning, onboard kitchen, parking heater, +++Very good condition+++++Classic car+++++H-registration+++++Kali trailer from 1959+++++Vehicle from 1974 Completely restored in the Neoplan factory in Ehrenhain+++++Club corner+++Engine: Daimler BenzKM reading according to speedometerGearbox: 6-speed manual Seats: 20+1 travel seating20 seats with club corner / 27 seats without club corner---- Djb Hlermlkrs Dauout Safety Fog lights Passenger compartment Air conditioning * Tables * Hoods * Coffee grinder * Club corner * Kitchen unit * Refrigerator Exterior Trailer coupling * Voltage converter * Tachograph with window * Sun visor * Driver's door * Electronic exterior mirrors * Roof hatches Audio and communication Radio / cassette Other Hubcaps * Vehicle dimensions: Length 6.75 m, width 2.40 m, height 2.81 m * Twin tires * Tires front approx. 70% ? Rear approx. 70% * Our internal vehicle number: 8046 Subject to errors. Images and text may differ from the vehicle. Over 300 vehicles always on offer.

Year of construction: 1991, Condition: used, Technical details: x-axis: 500 mm z-axis: 685 mm diameter: 300 mm air pressure - required: 5 bar tool table-turnable: 360° Tool table: Dm=745 mm tool diameter: ca. 290 mm total power requirement: 0,5 kW weight of the machine ca.: ca. 0,15 t space requirement of the machine approx.: 2,38x1,45x1,94 m Adjustment- and Measuring Device - measuring range z = 680mm - measuring range x = 500mm - pneumatical slide clamping - manual endless fine adjustment - turret rotating table - 220V/; 50/60Hz accessories: Dobeu N An Ij Hl Dausut - taper 1x SK40 and 2 x SK 45 + chisel holder and adapter - brochure Sold as is. EDP not connected - hard disk and software missing *

Condition: excellent (used), 14 head computer weigher in lie new condition. This was bought for a line that only ran for a few months, it is in almost as new condition still. Available as a line with GIC VPB4000 bagger. Djb Hl Dovtgdksauout

Year of construction: 1994, Condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 110 mm high Electrical connection values: 3 x 400 volts, 50 hertz Heating: electric, heating coils, semiconductor relay "on/off", 100 kW, capacity: approx. 200 kg / h Working temperature: max. 1100° C Heating zones: 6 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 450 mm Cooling zones: cooling zone 1 approx. 1.4 m, cooling zone 2 approx. 3.0 m, cooling zone 3 approx. 4.5 m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Dusb Hl Dov Ipcxoauot Protective gas: nitrogen N2, hydrogen H2 Dimensions: heated length (6 zones) approx. 3500 mm, furnace length approx. 4600 mm, feed table approx. 5280 mm, removal table approx. 1500 mm, total width approx. 1800 mm, total height approx. 2100 mm, total length approx. 23 m No gas table included.

Condition: used, mileage: 693,000 km, first registration: 07/1988, fuel type: diesel, number of seats: 58, gearing type: mechanical, axle configuration: 2 axles, color: white, brakes: retarder, Year of construction: 1988, fuel: diesel, Mercedes OM 422 engine Duob Hl Dajl D Emnjuet

Condition: used, mileage: 123,436 km, power: 110 kW (149.56 HP), fuel type: diesel, first registration: 07/2019, emission class: euro6, color: white, Year of construction: 2019, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, sliding door, traction control, ,, * More 1500 vehicles can be found on our homepage, leasing and financing also possible without down payment!\*Our prices are cash collection prices, i.e. additional work such as retrofitting a tow bar, second set of tires, customer service, warranty, carefree packages, etc., will be charged additionally.\*Despite the greatest care, advertising errors cannot be excluded and are therefore without guarantee! Input errors, prior sale and errors excepted. Equipment and consumption details are based on the VIN data query via the DAT SilverDAT system. The VIN details are not part of the purchase contract.\*Our new cars: Due to various manufacturer specifications, it is possible that these have already received a daily and short-term registration or will receive one before sale. Dsb Hov Rkvrol Dausut ... Subject to changes, prior sale and errors excepted

Year of construction: 2020, operating hours: 0 h, Condition: as good as new (ex-display), PTC CTR-H Hot water 95°C, steam 140°C/32bar and high pressure steam 150°C/200bar (only version 16l/min. and 350 bar) Trailer similar but no Dynajet, Oertzen, Falch, DIBO,.... - Single axle trailer on hot galvanized frame with support foot with wheel, parking brake, automatic reverse, parking feet, rear lights and reflectors, towing eye for 50 mm coupling, 13" tires and ABS. The following hot water models are available: CTR-H 21/200 | 21l/min. at 200bar | Engine: Kohler KDW702 12,6kW CTR-H 20/350 | 20l/min. at 350bar | Motor: Kohler KDW1003 19kW CTR-H 16/350 | 16l/min. at 350bar | Motor: Kohler KDW1003 19kW - Dimensions: 3.045 x 1.390 x 1.190 - Empty weight: approx. 400 kg - High pressure pump: Comet RW/TW Premium with integrated gearbox - HD reel: manual with max. 60 m. 1/2" or 80 m. 3/8" hose (included) - Water supply reel: manual with 35 m. 3/4" hose Duob Hl Djfdkaksaujt - Water tank: 200 l - 75 kW heating module - Options like warning light, autom. hose reel and accessories on request

Condition: used, Year of construction: 1996, Technical details: x-travel: 600 mm y-travel: 450 mm z-travel: 400 mm tool taper: IBAG SKI 25 control: Heidenhain TNC 425 quill stroke vertical: nicht bekannt mm turning speed range: 2400 - 24.000 U/min Dusb Hl Dou Nc Uheaust feed:: 1 ... 5000 m/min m/min table surface area: 850 x 440 mm table swivelabel +/-: starr ° table load: 500 kg tool holder / places: 32 places für IBAC SKI 25 weight approx.: 3600 kg dimension machine xH: 2,5 x 3,0 x 2,1 m dimensions electric cabinet: L:1550 X B:550 x H:1700 mm Universal Milling and Drilling Machine - with IBAG high frequency spindle type HF 100A-30/24 - milling spindle taper Tool taper IBAG SKI with IBAG tightening bolt - cooling tank, capacity 16 l/min and 100 litre capacity Accessories: - 3-D push-button Heimer - Vertical head Hermle - Tool holders according to availability i.D. *

Condition: used, overall weight: 34,000 kg, empty load weight: 8,510 kg, maximum load weight: 25,490 kg, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, loading space volume: 87 m³, first registration: 06/2017, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, Schmitz deep-freeze trailer Thermo King SLXe 300 refrigeration - Refrigeration unit: Thermo King SLXe 300 - Only 954 hours Djb Hlov Ifrcs Daueut - 13.40 x 2.50 x 2.60m - Power connection - Disc brakes - Schmitz axles - Flower width - Pallet box - Aluminium floor - FRC - Tyres: 385/65/22.5 Very good condition! Net export price!   Schmitz deep-freeze trailer Thermo King SLXe 300 refrigeration - Refrigeration unit: Thermo King SLXe 300 - 13.40 x 2.50 x 2.60m - Power connection - Disc brakes - Schmitz axles - Flower width - Pallet box - Aluminium floor - FRC - Tyres: 385/65/22.5 Very good condition! Net export price!   Schmitz semi-trailer refrigerator Thermo King SLXe 300 Refrigeration - Refrigerator group: Thermo King SLXe 300 - 13.40 x 2.50 x 2.60m - Electric connection - Disc brakes - Schmitz wipers - Flower width - Pallet box - Aluminum deck - FRC - Tires: 385/65/22.5 Very good condition! Net export price!   Yourtrucks Group The Yourtrucks Group maintains business relationships around the world. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our advertisements, as this is independent of the place of use.   Yourtrucks GmbH compiles the content of this website with the greatest care and ensures that it is regularly updated. This information is to be viewed as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Changes, errors, typos and advance sales reserved.   Only our general terms and conditions apply.     Languages - We speak english - On parle francais - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: excellent (used), Year of construction: 2000, Two pallets 300 x 300, X 650 mm, Y 560 mm, Z 560 mm, 120-12.000Rpm, BT 40 Big Plus, 60 pos ATC, cooling through spindle, Fanuc 16iM. Dueb Hl Dorxcdueaust

Condition: good (used), Year of construction: 2002, total length: 2,000 mm, total width: 1,200 mm, total height: 1,200 mm, overall weight: 750 kg, input voltage: 400 V, power: 705 kW (958.53 HP), CFS Ecocut 175 H Emulsifier The GEA EcoCut 175 is a compact yet robust emulsifier designed for small to medium-sized productions. It can be used to prepare raw materials such as pork skin emulsion as well as for final emulsions. With the choice of either a single- or double knife set, it can produce coarse as well as superfine emulsions. Produces fine and coarse emulsions Produces pork skin emulsions Excellent emulsion quality in batch production Single- and double-knife Pump or hopper fed Brand: CFS Model: Ecocut 175 H Year: 2002 Capacity: 4.000-6.000 kg/h (depends on product and knife set used) Hopper Capacity: 150 L Dujb Hl Djqpd Aqsauot Feeding Method: Hopper or pump Cutting Head Diameter: 175 mm Knife Speed: 2.950 RPM Power: 3PH / 400V / 50Hz / 70,5kW Machine Dimensions (LxWxH): 2.000x1.200x1.200 mm Machine Weight: 750 kg.

Year of construction: 2008, Condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 140 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 185 kVA Heating: electric, heating coils, thyristor control "on/off", heating output approx. 174 kW, output > 400 kg br. Working temperature: max. 1150° C Heating zones: 6 Belt construction: Mesh belt made of high-heat-resistant steel, width approx. 450 mm Belt speed: Adjustable from approx. 100-900 mm / minute Heating muffle: Heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 4m Dusb Hl Daev Igcpsust Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: Nitrogen N2, Hydrogen H2 Dimensions: Working height approx. 1060 mm, heated length (6 zones) approx. 5800 mm, furnace length approx. 6600 mm, feed table approx. 10000 mm, removal table approx. 2000 mm, total width approx. 1900 mm, total length approx. 38 m, total height approx. 2100 mm

Condition: used, Year of construction: 1966, Technical details: bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 (40/50/63/160+200 o.Funktion) U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m This radial drilling machine has an electric sliding table! Further features: - Distance from spindle center to stand: 360 - 2000mm - Distance from drill chuck to table top: 1270mm - Distance from spindle to base plate: 1220 - 4520mm - Drilling capacity in St 60: 63mm at feed rate 0.32 - Drilling capacity in GG 22: 80mm at feed rate 0.5 Debsu Id Dbj Hl Daueut - Horizontal travel of the drilling head: 1640mm - Vertical travel of the drill head: 980mm - Distance from spindle nose to base plate: 430-1770mm Equipment: - Coolant pump (out of function) - Support stand - 1 electrically driven sliding table 1250 x 1000mm type TI 18 with digital display (interface to the machine) - incl. machine vice Not all revolutions are currently selectable. i.D. *

Year of construction: 2007, Condition: used, Technical details: saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control Dusb Hl Dasu Nimqsuet for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *