Used Hurlimann H-6130 for sale (24,068)

Condition: excellent (used), Year of construction: 2018, operating hours: 4,618 h, lifting height: 5,400 mm, mast type: triplex, battery capacity: 465 Ah, battery voltage: 48 V, fork length: 1,150 mm, Field of application: Internal logistics Dkj Ia Sfsv U N Nlsmrol Lifting capacity: 1.400 kg Technical condition: very good Visual appearance: very good Serial number: 6560018 Please contact PEDRO GÓMEZ for more information

Condition: used, mileage: 160,563 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, first registration: 01/2005, emission class: euro3, color: white, brakes: retarder, number of seats: 11, Year of construction: 2005, Equipment: ABS, air conditioning, parking heater, Beautiful MB Vario 814D from government/state police ownership: De Ia Sfmsv U H Iferskl +++ Body thoroughly refurbished, and partial surfaces professionally repainted and preserved +++ Version as a bus (group vehicle) MR / high with full climate control, auxiliary heating, driver's airbag, ABS and differential lock on the rear axle, as well as a retarder. This is an electric, wear-free eddy current brake for speed adjustment. The body was professionally repaired by us in-house. Before the repair and painting work, the vehicle was disassembled. The side panels R and L were then half-repainted, the rear, the front fender, and the front panel were completely repainted. After the painting, permanently elastic seam sealants and cavity preservation were applied. We also thoroughly derusted the frame/chassis of this Vario and repainted it in several coats, then permanently preserved it with wax. We also performed a fresh inspection, including a change of engine oil and brake fluid, replaced all four batteries, and installed a new air dryer for the brake system. Furthermore, the plastic glazing in the driver's cab was replaced with real glass. Due to its good insulation properties, we left the plastic glazing in the rear of the vehicle installed. This MB Vario 814D offers an ideal basis for a spacious motorhome. We can also convert it into a So KFZ motorhome for you for an additional charge of €600. The vehicle will also receive a 220V external power supply with a residual current device (RCD) and two internal sockets. Here's some general information about the MB Vario 814D: The air conditioning and auxiliary heating are very effective: 1.) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heating is a hot water circulation system with convectors in the passenger compartment for draft-free heating. Top speed thanks to the long axle ratio: Top speed according to the documents: 120 km/h. A total of 11 seats. The passenger compartment seats are designed as recliners - with adjustable backrests and armrests. Furthermore, the left inner seats can be moved about 10 cm into the aisle for greater freedom of movement on the console. There are three effective roof hatches. Interior dimensions from driver's seat: 4000 x 1850 x 1900 mm (LxWxH) +++Subject to errors, changes, and prior sale.

Condition: used, Year of construction: 2008, Technical details: Ds Ia Sfmewdv Dterjkl x-travel: 630 mm y-travel: 630 mm z-travel: 630 mm spindle speed:: 16.000 U/min HSK-63 WZ pick-up 4 additional pallets without fixture Extensive overhaul with new spindle in 2023 Geometry check at the end of 2024 *

Condition: used, mileage: 481,300 km, power: 338 kW (459.55 HP), first registration: 01/2019, overall weight: 18,000 kg, fuel type: diesel, color: green, axle configuration: 4x4, empty load weight: 7,883 kg, tire size: 315/80 R22,5, fuel: diesel, wheelbase: 3,600 mm, gearing type: automatic, emission class: euro6, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cruise control, differential lock, navigation system, onboard computer, parking heater, traction control, Urea tank (AdBlue) Displacement 12,419 ccm Hydraulics (power take-off) Tipping hydraulics Distance warning system EBS ESP Light alloy rims Payload 10,117 kg Pritarder Leaf-air suspension Automatic air conditioning Sun visor 1 couch Rotating beacons Alcoa alloy wheels Air-suspended cab De Ior Ny Amoa Sfmrjkl Cool box Exhaust upwards Euro 6 C VIN no. 816358 Errors excepted

Condition: used, Functionality: fully functional, Year of construction: 2012, operating hours: 9,142 h, load capacity: 4,500 kg, lifting height: 4,525 mm, free lift: 1,564 mm, fuel type: diesel, mast type: triplex, construction height: 2,376 mm, fork carriage width: 1,350 mm, fork length: 1,700 mm, engine type: VW 4 Zylinder PD, drive type: Diesel, construction width: 1,350 mm, Diesel Forklift Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Hydrostatic / 2-Pedal Speed Class: 20 Condition: Reconditioned without warranty Technical Condition: Good Front Tire Type: Pneumatic Front Tire Size: 300-15 Front Tire Condition: 80 - 100% Rear Tire Type: Pneumatic Rear Tire Size: 250-15 Rear Tire Condition: 80 - 100% Description: Delivered with a new FEM 4.004 inspection including inspection booklet. If you have any further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to inquire about leasing and financing, as well as delivery at favorable conditions. Linde equipment can also be traded in – even without purchasing it from us. Reported operating hours were read as of the date listed. Subject to prior sale, changes and errors. Reach fork, sideshift, fork positioner, Durwen fork positioner with separate sideshift 3rd valve, 4th valve, rear work light, front work light, heating, German Road Traffic Licensing Regulations (StVZO), full cab, full free lift, safety light, exterior mirrors, seat heating, Dks Ia Sfev Ufd Eemrsl Comfort fabric seat, air suspension, seat heating, Bluespot rear, flashing light, radio

Condition: used, Year of construction: 2019, operating hours: 2,495 h, Snorkel 660SJ telescopic boom lift, built in 2019, with a working height of 22 meters! ----* Manufacturer: Snorkel * Type: 660SJ * Year of manufacture: 2019 * Operating hours: approx. 2,495 * Working height: approx. 22 meters * 4x4 all-wheel drive * Weight: approx. 12,409 kg * Deutz diesel engine * Good condition! * More pictures available upon request * Video available upon request Dks Ijv T E Unea Sfmrjl * Price: €25,900, net + 19% VAT ----For further questions, please call: For more questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information is provided without warranty and guarantee. Errors and prior sale reserved.

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK .: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg Dj Iev D Nvdja Sfmrekl

Condition: good (used), axle configuration: 3 axles, first registration: 12/2016, suspension: air, tire size: 205/65R17,5, color: other, Year of construction: 2016, Equipment: ABS, = More options and accessories = - EBS - Hydraulic system - Alloy wheels = Remarks = Number of axles: 3, Twin tires, Own weight: 6860 kg, Gross weight: 23800 kg, Alloy wheels, Suspension type: Full air, ABS, EBS, Hydraulic system, Max. number of cars: 3, Axle type: BPW = More information = Dke Ia Sjvrz T Defmrsl General information Cabin: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Gearbox Gearbox: Manual transmission Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; Tire profile left inside: 8 mm; Tire profile left outside: 8 mm; Tire profile right inside: 9 mm; Tire profile right outside: 8 mm Axle 2: Double tires; Tire profile left inside: 11 mm; Tire profile left outside: 10 mm; Tire profile right inside: 10 mm; Tire profile right outside: 9 mm Axle 3: Double tires; Tire profile left inside: 9 mm; Tire profile left outside: 10 mm; Tire profile right inside: 8 mm; Tire profile right outside: 8 mm Dimensions Dimensions (L x W x H): 1040 x 255 x 90 cm Weights Empty weight: 6,860 kg Payload: 16,940 kg GVW: 23,800 kg Functional Max. number of cars: 3 Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2024, machine/vehicle number: AES80, The line serves for the preparation of shredded cabbage intended for fermentation and for salads. This line may include following machines and equipment: box pallet tipper, unloading table, semi-automatic cabbage core drilling machine, cabbage shredding machine, conveyor for shredded cabbage , salt/spices Ds Ia Sfmep E Eluorskl dispenser, grated carrot dispenser (or other products like beets, grated paprika), additional functional conveyors for transportation.

Condition: used, Remote controlled tensioning wagon fully hydraulic. Track gauge 900 mm. Carriage height 400 mm. With auxiliary trolley. Cabin. Electric control cabinet. Model / Prism Chains driven. 4 years before decommissioning many new parts installed. Dke Iaemhgc As Sfmrjl Hydraulics, feed, collet etc.

Condition: new, Functionality: fully functional, power: 5.4 kW (7.34 HP), fuel type: diesel, color: yellow, overall weight: 195 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson vibratory plate DPU 3070 H, - NEW - ! Weight 195 kg, frequency 90 Hz, centrifugal force 30 kN, 700 mm working width, Hatz diesel engine 1B30 with 5.4 kW, Other sizes also available! Location of the machine warehouse D-46514 Schermbeck. Dkj Ia Sjv Tv N Nsfmrel

Condition: used, Hydraulic unit, whisper unit BOSCH REXROTH Hydraulic unit Type UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Factory no. R904100893 / 480933 10 Year of manufacture approx. 2010 Pressure output: 55 bar Delivery rate: 13 L/min. Tank capacity: approx. 20 liters Engine power: 1.5 kW Speed: 1440 rpm. Mains connection: 400 volts, 50 Hz - Unit was used for an operating pressure of approx. 80 bar - 1 hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, pressure max. 100 bar - 1 air-oil cooler, fan cooling by electric motor from the hydraulic pump - Hydraulic block BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 - 2 hydraulic pressure accumulators - 1 replaceable filter cartridge Dkj Ia Sov Ev Dqofmrel - 1 pressure sensor IFM, type TR7 430 - 1 oil sight glass - Hydraulic connections 2x 18L - Sold without oil content Space requirement L x W x H: 700 x 450 x 850 mm Weight: 105 kg very good condition

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls Dke Ia Sfov D Nutemrol -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: good (used), axle configuration: 3 axles, first registration: 10/2016, suspension: air, tire size: 205/65R17,5, color: other, Year of construction: 2016, Equipment: ABS, = More options and accessories = - EBS - Hydraulic system - Alloy wheels = Remarks = Number of axles: 3, Twin tires, Own weight: 6860 kg, Gross weight: 23800 kg, Alloy wheels, Suspension type: Full air, ABS, EBS, Hydraulic system, Max. number of cars: 3, Axle type: BPW = More information = General information Cabin: Day License plate: KLEYN1 Drivetrain Fuel type: Diesel Gearbox Gearbox: Manual transmission Axle configuration Tire size: 205/65R17.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; Tire profile left inside: 8 mm; Tire profile left outside: 9 mm; Tire profile right inside: 6 mm; Tire profile right outside: 5 mm Axle 2: Double tires; Tire profile left inside: 8 mm; Tire profile left outside: 8 mm; Tire profile right inside: 7 mm; Tire profile right outside: 9 mm Axle 3: Double tires; Tire profile left inside: 3 mm; Tire profile left outside: 3 mm; Tire profile right inside: 7 mm; Tire profile right outside: 6 mm Dimensions Dimensions (L x W x H): 1040 x 255 x 83 cm Weights Empty weight: 6,860 kg Payload: 16,940 kg GVW: 23,800 kg Functional Max. number of cars: 3 Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support Dj Ia Sfmovrz Twsrskl • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Year of construction: 2019, operating hours: 0 h, Condition: new, machine/vehicle number: Al160, Compact size, high productivity food processing machine: Cabbage Shredder is productive, compact size commercial cabbage shredding machine that is intended for cabbage shredding, slicing, grating as well as beets, carrots grating, julienne cutting. High productivity 500-1000 kg/h, high-quality materials as food grade stainless steel AISI 304. Made for small and middle size producing companies. General Features: Dke Iajdwfdqe Sfmrjl • Productivity 500-1000 kg/h; • High quality, longlasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask;

Condition: excellent (used), Year of construction: 2021, operating hours: 415 h, lifting height: 4,850 mm, fuel type: diesel, mast type: triplex, power: 85 kW (115.57 HP), motor manufacturer: Deutz, total height: 3,000 mm, total length: 6,400 mm, total width: 2,240 mm, color: other, Year of manufacture: 2021 Torque: 609 Nm Number of cylinders: 4 Empty weight: 14.480 kg Engine type: Deutz TCD 4.1 L4 Lifting capacity: 8.000 kg CE mark: yes Technical condition: very good Dke Ia Sov Tdp Dsfmrjl Visual appearance: very good Drivetrain Internship / Tier: Stage V / Tier IV final General Country of production: Germany Condition CE type: CE Demo forklift with only 415 Hours, Triplex mast with freelift, Kaup forkpositioner and shift, airconditioning, forks 2400 mm

Condition: used, mileage: 449,980 km, power: 338 kW (459.55 HP), first registration: 04/2019, overall weight: 18,000 kg, fuel type: diesel, color: green, axle configuration: 4x4, empty load weight: 7,928 kg, tire size: 385/65 R22,5 - 315/80 R22,5, wheelbase: 3,600 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, additional headlights, all wheel drive, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, traction control, Urea tank (AdBlue) Displacement 12,419 ccm Hydraulics (power take-off) Tipping hydraulics Distance warning system EBS ESP Light alloy rims Payload 10,072 kg Pritarder Automatic air conditioning Sun visor 1 couch Rotating beacons Alcoa alloy wheels Air-suspended cab Cool box Exhaust upwards Euro 6 C Dj Ia Sfmouc T Suorskl VIN no. 828644

Condition: used, Year of construction: 2017, overall weight: 375 kg, total length: 675 mm, total width: 805 mm, total height: 1,290 mm, TECHNICAL SPECIFICATIONS - Modular nitrogen generator for wine applications - Model : TERA M020 - Output pressure : 12 bar.g max - Max air pressure : 12.5 bar.g - Filtration : 0.01 µm - Oil: < 0.01 ppm De Ia Sov Uk E Ijfmrskl - Dew point under pressure : - 44 °C - Power supply : 230 V / 50 Hz - Power rating : 100 W - Protection rating : IP55 - Ambient temperature -10° C / + 50° C - Connections - Inlet: 3/4 - 1/2’ outlet - Reference : 007357 DIMENSIONS - Length : 675 mm - Depth : 805 mm - Height : 1290 mm - Weight : 375 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. Ds Iev D Nugja Sfmrjkl -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: used, Tetra Pak / FBF Homogeniser, this is originated and made by FBF for Tetra Pak U.K . The machine was working until 2 years ago in an ice cream factory . This was connected with the mix plant. In all cases these machines can work on various applications that would require homogenisation between 180-250 bar pressure . The machine condition is good, we have checked this machine and has very competitive prices for future spare parts in comparison with other homogeniser manufactures. Tetra Pak / FBF Homogeniser 500 Litres per hour 250 Bar FBF/Tetra Pak 500 L/H Homogeniser at 250 Bar Condition : Serviced FBF /Tetra Pak 500 L/h with a Max pressure of 250 bar, the machine was previously used on Ice cream production, can be used also on other powder homogenisations and yoghurt production. Dj Ia Sfmsvvt Sterokl Capacity: 500 L/h Bar pressure: 250 Stages: 2 (two) Volatge: 400 V/ 50 H

Condition: used, axle configuration: 4x4, Year of construction: 2022, operating hours: 1,165 h, Equipment: all wheel drive, Drive: Wheel Rental currency: EUR Ds Ia Sfmsu Uaypsrokl Please contact Jan De Lepeleer for more information

Condition: good (used), Year of construction: 1987, max. size 52 x 72 cm age 1987 2 printing units + high pile delivery stream feeder vacuum feed board photoelectron. side edge control pneumatic side lays conventional dampenings quick plate clamping bars dry sprayer Grafix Exactomat high pile delivery shown totalizer: approx. 61 mill. impressions Delivery time: immediately Dj Isv E Hbtja Sfmrekl

Condition: used, final pressure: 1,400 bar, pressure: 1,400 bar, Good working high pressure pump with 20mm plungers 1400 bar 35 ltr/min Dj Iev Suhzea Sfmrskl IL 375 TF375H

Condition: new, Year of construction: 2024, Roller width 350 mm roll diameter 110 mm Roller covering - soft rubber 70 Grad shore rubber NBR - Qualität Dks Ia Ssu Dn Uvefmrol air pressure max. 4 bar Pressure line 28 N / mm Capacity of dye tub Becken - 1,3 Liter Capacity of dye tub Zwickel - 0,3 Liter Speed driven roll 0-25 U/min speed 1 - 10 m/min voltage 230 V / 50 Hz drive motor 0,4 kW weight 130 kg dimensions 1050 x 800 x 810 mm • 2-Roll-laboratory padder for horizontal and vertical roller-arrangement. • The changing from horizontal to vertical roller arrangement can be effected by easy re-allocation of the upper squeezing roll with the pressure cylinders, • small trough for vertical roller-arrangement, • content: 1.3 litres, • with controllable motor drive, • direct drive to the fixed roll, • by means of wheels the pressure roll is driven when the nip is open.

Condition: excellent (used), Year of construction: 1999, Clamping force: 25 tons Distance between tie bars: 270x270 mm Opening max: 275mm Min Mould height: 200 mm Mold platens size: 400 x 400 mm Screw diameter: 18 mm Injection volume: 20 cm3 Shot weight: 17 g Ds Iaevl Skgj Sfmrjkl Injection pressure: 2500 bar Working hours: 38.035 h