Used Hurlimann H-6130 for sale (24,154)

Condition: not inspected (used), Year of construction: 2000, Functionality: unexamined, Straight-cut band saw, cutting capacity up to 450 mm wide Debowhmpbe Hl N Izjcg The machine was part-exchanged and reportedly worked until the customer's last use. "This is a used machine whose functionality has not been tested. The sale is made without any warranty."

Condition: new, Functionality: fully functional, power: 3.5 kW (4.76 HP), fuel type: diesel, color: yellow, overall weight: 160 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson DPU 2540 H vibratory plate compactor, - NEW - ! Djb Hljwg Rx Rs N Izocg Weight 160 kg, Frequency 90 Hz, Centrifugal force 25 kN, 400 mm working width, Hatz 1B20 diesel engine with 3.5 kW, Other sizes also available! Machine location: Warehouse, D-46514 Schermbeck.

Condition: good (used), mileage: 426,394 km, power: 265 kW (360.30 HP), first registration: 01/2010, fuel type: diesel, color: yellow, axle configuration: 6x4, fuel: diesel, wheelbase: 5,550 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, Year of construction: 2010, Equipment: ABS, air conditioning, crane, cruise control, trailer coupling, = Other options and accessories = - Electrically adjustable exterior mirrors - Speed limiter Deb Hl Nowg Avhe Izecg - Fog lights - Sunshade - Toolbox - Power take-off (PTO) - Tow bar = Other information = Technical information Number of cylinders: 6 Engine displacement: 10,518 cc Gearbox Gearbox: ZF, 16 gears, manual Axle configuration Front axle: Max. axle load: 9000 kg; Steered; Tire profile left: 60%; Tire profile right: 60%; Suspension: Leaf spring Rear axle 1: Twin tires; Max. axle load: 11500 kg; Tire profile left inside: 60%; Tire profile left outside: 60%; Tire profile right inside: 60%; Tire profile right outside: 60%; Suspension: Air suspension Rear axle 2: Lift axle; Max. axle load: 7500 kg; Steered; Tire profile left: 60%; Tire profile right: 60%; Suspension: hydraulic suspension Dimensions Dimensions (L x W): 808 x 253 cm Weights Empty weight: 13,235 kg Payload: 14,765 kg GVW: 28,000 kg Functional Crane: Palfinger PK 12001 B Rotor and Graber, year of manufacture 2009, behind the cabin Brand of bodywork: HTS Container cable system/ 3 side tipper Pump: Yes Condition Technical condition: good Visual condition: good Damage: none More information Contact Gerrit Haverhoek for more information.

Condition: used, Functionality: fully functional, machine/vehicle number: #1039, Year of construction: 2019, operating hours: 983 h, load capacity: 3,500 kg, lifting height: 12,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,420 mm, fork length: 1,200 mm, engine type: Deutz TD 3.6 L ( 75 PS ) Stage 5, drive type: Diesel, Diesel forklift Chassis number: #1039 Mast type: Telescopic Transmission: hydrostatic Dsb Hlowg Ng To N Izecg Technical condition: very good Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, exterior mirrors, windshield wipers, 20 KM/H, CE certificate

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Dceb Hlewhvrro N Izjg Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor

Condition: used, color: yellow, Year of construction: 2008, General information Field of application: Construction Drivetrain Type of fuel: Electric Weights Empty weight: 2.000 kg Functional Lifting capacity: 200 kg Working height: 1.720 cm Other information Delivery terms: EXW Max. horizontal reach: 870 m Transport dimensions (LxWxH): 6,25x1,6x2,16 Production country: UK Additional information Please contact Vink Machinery for more information Niftylift 170 HE * 2008 Dcobowcd Scj Hl N Izsg * Battery and 230 Volt drive * 17 meter working height * 8.7 meter horizontal reach * 200 kg lifting capacity * 2000 kg own weight * Inspection until January 2026 * Including documents

Year of construction: 2025, Condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint Dcjb Hljp N Dv He N Izog This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 400 Rotor width (mm) 1000 Drive capacity (hp) 40 Rotor blades (pieces) 3(5) x 1 Stator knives (rows) 2 Hopper opening (mm) 490 x 990 Total length (mm) 1348 Length machine (mm) 1120 Width total (mm) 1577 Width machine (mm) 1216 Height (mm) 1914

Year of construction: 2009, Condition: excellent (used), Pasteur 500l / h gas Dsb Hl Nogigryj Izocg overhauled automatic temperature control

Condition: new, power: 137 kW (186.27 HP), fuel type: diesel, color: yellow, first registration: 12/2019, Year of construction: 2019, operating hours: 12,353 h, Field of application: Construction Top speed: 50 km/h CE mark: yes General condition: good Technical condition: good Visual appearance: good Dcjb Hjv Hg Dksl N Izsg Price: On request Please contact Erwin for more information

Condition: used, Functionality: fully functional, machine/vehicle number: 1702, Year of construction: 2024, load capacity: 8,000 kg, lifting height: 5,500 mm, free lift: 1,945 mm, fuel type: electric, mast type: triplex, construction height: 3,220 mm, engine type: Elektro/ Inkl., drive type: Elektro, Electric 4-wheel forklift truck Chassis number: 1702 Mast type: Triplex Gearbox: Impulse control Technical condition: normal Dcjb Hl Nowg I Uij Izjg 3rd valve, 4th valve, rear working lights, front working lights, roof cover, heating, load protection grille, full cab, impulse control, safety light, interior mirror, exterior mirror, Load center of gravity at 900mm

Year of construction: 2024, Condition: new, Functionality: fully functional, faceplate diameter: 650 mm, height (extended): 1,060 mm, height (retracted): 711 mm, height adjustment type: hydraulic, maximum load: 1,200 kg, welding current at 100% duty cycle: 300 A, The positioner can also be hired (also as a trial hire) Maximum load: 1.2 tonnes Rotation speed: infinitely variable approx. 0.07 - 1.6 rpm Face plate size: 650 mm diameter with T-slots Faceplate height (horizontal): 711-1,060 mm Hydraulically height-adjustable for more ergonomic working Dob Hl Nerkmngo Izocg Control: wired manual control bulb and foot switch Subject to prior sale and hire

Condition: used, Year of construction: 2007, Milling machines Dsbswczqcj Hl N Izocg Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 milling machine / machining center Control: Sinumerik 840 D powerline spindle chuck: HSK-A63 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 630 mm table size Y: 630 mm max. workpiece weight: 800 kg tool changer: 180 - time input Power : 30 kW Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Chip conveyor Belt filter system Cooling unit Without pallet changer Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dynamic package

Condition: new, Functionality: fully functional, fuel type: diesel, overall weight: 13,500 kg, Year of construction: 2023, machine/vehicle number: VCE0L60HP00015582*, Volvo wheel loader type L60H newly purchased, not used Dob Hot Ecwyol N Izjcg !! Sale on behalf of customer !!!

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. Dob Hsvt Dwbsl N Izocg All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, Year of construction: 1996, pressure 16 t stroke 4 - 70 mm no. of strokes 140 /min throat 200 mm dayligth 365 mm table surface area 420 x 390 mm hole in the table 160 x 120 mm table height over floor 650 - 840 mm table adjustable 190 mm ram surface 160 x 125 mm ram adjustment 80 mm power requirement 2,2 kW Dsb Hl Njwc U Iuo Izocg Weight 1,4 t dimensions (WxDxH) 1,0 x 1,6 x 2,0 m permitted for manual loading according to the CE-norm with motor, hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, motorized central lubrication, two-hand operation

Condition: excellent (used), Lifting unit Make Römheld type H 51 R 52 3507 Lifting unit lifting force 4 kn 400 kilo Deb Hsih R Hbel N Izjcg Lifting path 300 mm The clamping device can be rotated 180 degrees in the horizontal axis. 4 x by 90 degrees in the vertical axis

Condition: new, Functionality: fully functional, power: 5.4 kW (7.34 HP), fuel type: diesel, color: yellow, overall weight: 181 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson vibratory plate DPU 3050 H, - NEW - ! Weight 181 kg, frequency 90 Hz, centrifugal force 30 kN, Dcjb Howgw Rgsl N Izeg 500 mm working width, Hatz diesel engine 1B30 with 5.4 kW, Other sizes also available! Location of the machine warehouse D-46514 Schermbeck.

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Dsb Hlewczp Es N Izscg Number of axis: 4 milling machine / machining center Control: Sinumerik 840D powerline spindle chuck: HSK-A 63 spindle revolutions: 10000 rpm max. workpiece weight: 800 kg tool changer: 240 - time Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Belt filter system Cooling unit Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Cooling unit Blast air Dynamic package

Condition: ready for operation (used), 11x DRK 26 H from Erwin Stelzer Warburg agitators with emergency stop switch. 8x with propeller, 3x without propeller. Product data: 1 Kw 220/380V 5.9/3.4 AMP. 920 U.p.m. 2,7 HP 0,64 cos Insulation class E Dcjb Hlofr Iane N Izsg Shaft length 400mm Shaft diameter 30mm Total length 800mm blade diameter 240mm Connection: DN125

Condition: used, mileage: 600,699 km, Year of construction: 1990, Serial number: YS2RH6X2Z0114xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19850 Specifications - 1990 model - 600,699 km - Not Eu-approved - Manual transmission - Repair item Dcsb Hl N Iov U Svhozjg - Tires (see pictures) - 6x2 - Front suspension: steel - Rear suspension: steel - Bogie lift - Hiab crane - 14 t/m Hiab - 2 Hydraulic extensions - 2 Manual extensions - Length on plan: 6,465 m - Ready for delivery Description: We have a 1990 Scania R143 H 6x2 Timber truck Repair item w/ 14t/m Hiab crane aggregate. The car is being sold as repair item as it is not Eu-approved and is therefore in uncertain condition. Both car and crane work, but some additional costs must be considered. Ready for delivery. Km: 600699 Technical approved: no Own weight: 10400 Total Weight: 27500 Payload: 17025 Width: 250 Length: 896 Gearbox: Manual

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, Functionality: fully functional, machine/vehicle number: 190332, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm Dsb Hl N Iogrzh Eezocg distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: used, Year of construction: 2007, Milling machines Travel distance X: 800 mm Travel distanceY :800 mm Travel distance z: 800 mm HSC-machines Number of axis: 4 milling machine / machining center Control: Sinumerik 840D powerline spindle chuck: HSK-A63 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 630 mm table size Y: 630 mm max. workpiece weight: 800 kg tool changer: 180 - time input Power : 30 kW Rapid traverse: 80 m/min chip conveyor Without pallet changer Internal cooling lubricant supply Chip conveyor Belt filter system Cooling unit Without pallet changer Rotoclear Tool breakage control (laser) Mist separator Measuring probe Hand-held control unit Rinsing gun Dsb Hl N Iowczpxszscg Cooling unit Blast air Dynamic package

Condition: ready for operation (used), 35x DRK 36 H from Erwin Stelzer Warburg Mixers with emergency stop switch. product data: Dceb Hjfr H Ttel N Izog 2 Kw 220/380V 10/5.8 AMP. 940 rpm. 2.7 HP 0,72 cos Insulation class E Wavelength 400mm shaft diameter 35mm Total length 840mm Wing diameter 320mm Flange diameter 300mm

Condition: like new (used), Year of construction: 2007, operating hours: 47,800 h, Functionality: fully functional, machine/vehicle number: 203241, Used injection molding machine - New screw with original Arburg Multilift H The machine has a complete history with all major repairs and component replacements such as the screw, cylinder, etc. (In addition, the annual oil and filter changes, etc., were of course performed.) See document for download Manufacturer: Arburg Type: 470C 1500-350 Year of manufacture: December 2007 Dcob Hlsvhb Iys N Izsg Machine No. 203241 Control: Selogica Operating hours: 47,800 h Continuous maintenance by manufacturer Clamping unit Clamping force: 1500 kN/150 tons Tie-bar spacing: 470 x 470 mm Mold clamping platens: 650 x 650 mm Ejector stroke: 175 mm Opening stroke: 500 mm Mold installation height: 250 mm Clamping platen spacing: 750 mm max. Injection unit Injection volume: 145 cc Injection weight: 127 g Screw diameter: 35 mm Injection pressure: 2500 bar Extras Multilift H Handling interface Core puller - Available immediately from our Hanover warehouse, free on load or free to your door with freight reimbursement - Functionally tested (guaranteed functionality until first commissioning)

Condition: refurbished (used), Year of construction: 1973, Functionality: fully functional, rotational speed (min.): 4,800 rpm, Separator WESTFALIA type SB60-06-076 for beer, fruit juices, wine, vegetable juices, tea, coffee, for citrus and tropical fruits for pectin capacity: 300-13.000l per hour with 4,800 rpm Dimensions and weight: Height: 2500 mm Length: 2000 mm Width: 1800 mm Weight: 2350 kg Technical Data: Djbstqf Dbo Hl N Izocg Manufacturer: Westfalia Type: SB60-06-076 Year of construction: 1973 Serial number: 1668 021 Ø dl. 568 mm Drum speed: 4800 rpm Permissible density of the centrifuged material: Heavy liquid: 1.0 kg/ dm3 Solids: 1.45 kg/ dm Test books, tools, drawings available!